Search NASA⌕ Search

SEARCH · Search NASA

Results for “Catalytic Oxidizer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Catalytic bias in oxidation–reduction catalysis

Cataytic bias refers to the propensity of a reaction catalyst to effect a different rate acceleration in one direction versus the other in a chemical reaction under non-equilibrium conditions. In biocatalysis, the inherent bias of an enzyme is often advantagous to augment the innate thermodynamics of a reaction to promote efficiency and fidelity in the coordination of catabolic and anabolic pathways. In industrial chemical catalysis a directional cataltyic bias is a sought after property in facilitating the engineering of systems that couple catalysis with harvest and storage of for example fine chemicals or energy compounds. Interestingly, there is little information about catalytic bias in biocatalysis likely in large part due to difficulties in developing tractible assays sensitive enough to study detailed kinetics. For oxidation–reduction reactions, colorimetric redox indicators exist in a range of reduction potentials to provide a mechanism to study both directions of reactions in a fairly facile manner. The current short review attempts to define catalytic bias conceptually and to develop model systems for defining the parameters that control catalytic bias in enzyme catalyzed oxidation–reduction catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Calorimetric Energies and Chemical Potentials of Metal Atoms in Catalytic Nanoparticles on Oxide and Carbon Supports: Improved Size Dependencies and Adhesion Energies

The chemical potential of metal atoms, μM, in supported metal nanoparticles is an important descriptor related to both the catalytic activity and the stability of the nanoparticles. Here, we derive an expression relating μM to the radius of the particle’s contact area with the support and the adhesion energy at the metal/support interface (E adh ) that assumes the particles have the shape of spherical caps but of arbitrary contact angle with the support (θ c ) and includes an empirical correction for the increase in metal surface energy and adhesion energy with decreasing radius of curvature. We then show that, at any assumed contact angle, we can simultaneously fit previously reported measurements of both calorimetric μ M (from heats of metal vapor adsorption during nanoparticle growth by vapor deposition) versus metal coverage data and the He + low-energy ion scattering (LEIS) intensities for the metal and/or support versus metal coverage (using our recently developed spherical cap model for quantitative LEIS intensities), to determine the particle size versus coverage and E adh . Only one choice of contact angle gives a pair of values for contact angle and E adh , which is consistent with the Young–Dupré equation for the equilibrium shape of a spherical particle. At this equilibrium shape, we then applied this spherical cap model (SCM) to reanalyze microcalorimetric metal chemical potentials and LEIS signals versus coverage data for nine metal/support combinations that were previously analyzed by assuming that the particles had the shape of hemispherical caps, i.e., with a contact angle of 90°. We show that this revised approach gives close agreement with the calorimetric and LEIS data; the best-fit contact angles vary from 64 to 84°, correcting the earlier assumption of 90°. Furthermore, these results provide significant accuracy improvements in particle size versus coverage, metal chemical potential versus size and coverage, metal/support adhesion energies and contact angles for Cu, Ag and Au on CeO 2 (111), Ni on MgO(100), Ag on Fe 3 O 4 (111) and TiO 2 (100), and Ag, Ni and Pd on Ni-supported graphene. This revised approach is much more broadly applicable than the earlier hemispherical cap model (HCM).

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Plasma catalytic non-oxidative methane conversion to hydrogen and value-added hydrocarbons on zeolite 13X

Non-thermal plasma has unfolded highly efficient, safe to operate novel routes for methane conversion to hydrogen. In this work, methane conversion is performed under atmospheric dielectric barrier discharge (DBD) plasma with and without 13X zeolite-based catalysts i.e., 13X, Ga/13X, Pd/13X, and Pd-Ga/13X. Experimental results indicate that the plasma catalytic process delivered almost twofold higher product yield than the plasma only route. The binary Pd-Ga catalyst possesses highest catalytic performance with about 40 % CH 4 conversion at an input flowrate of 5 cm 3 min -1 and 2W due to the formation of the Pd-Ga alloy, which acts as catalytic active centre for activating C–H bonds. Product yield can be tailored by the catalyst design where the bimetallic Pd-Ga/13X preferably favours the hydrocarbon formation while H 2 is the dominant product obtained over the Pd/13X. The cleavage of C–H bonds of methane molecule over the plasma only route is mainly governed by energetic electrons in the gaseous phase the catalyst activity, and plasma-catalyst synergism play a significant role in the plasma catalysis process. Further, the findings from this work provide significant insights into the methane activation for subsequent optimization of the methane conversion processes operated on floating production, storage, and offloading vessels (FPSOVs). Exploiting untapped offshore natural gas reserves, where conventional pipeline systems are less economical.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Influence of oxidizing and reducing pretreatment on the catalytic performance of CeO 2 for CO oxidation

Cerium oxide (CeO 2 ) and ceria-based materials have been extensively investigated as catalyst and support materials for various catalytic reactions, due to higher oxygen storage capacity and excellent redox properties. In the current work, we investigated the impact of pretreatment conditions (e.g., oxidation and reduction) on the physical properties of bulk CeO 2 and catalytic activity for CO oxidation as a model reaction. To understand the physical properties of pretreated CeO 2 catalysts, a suite of complementary characterization techniques, including X-ray diffraction (XRD), surface area analysis (BET), X-ray photoemission spectroscopy (XPS), and Raman spectroscopy, were applied. The results showed that a higher pretreatment temperature led to a decreased specific surface area (SSA), a decrease in oxygen vacancy/defect sites, and increased crystallite size, while surface Ce 3+ /Ce 4+ ratio did not show a specific relationship to the treatment conditions. The 700 °C treated CeO 2 samples under oxidizing and reducing conditions showed higher specific oxidation rate (μmolCO/s/m 2 ) compared to other samples at 280 and 300 °C (or < 15% CO conversion). The CO conversion per total mass of catalysts, however, decreased with increasing temperatures, especially at 700 °C under reducing condition, indicating that the catalytic performance was affected by the physical properties (SSA, oxygen vacancy/defect sites, and crystallite size).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Catalytic Bias in Enzymatic Metal Cofactor-Based Oxidation-Reduction Catalysis

Catalytic bias refers to the relative rate preference of a catalyst for either the forward or reverse direction. In enzymatic metal cofactor-based oxidation-reduction catalysis, the tuning of catalytic bias plays an underlying role in controlling rates of reactivity. For this, enzymes have evolved complex active sites that can exist in multiple oxidation states with differing reduction potentials in order to achieve challenging multi-step, oxidation-reduction reactions. Conceivably, the relative stability of the intermediates that contribute to determining the rate-limiting step of the catalytic cycle could impose catalytic bias, although mechanisms for this concept are just beginning to be realized. As one example, recent work on Clostridium pasteurianum [FeFe]-hydrogenases which catalyze reversible hydrogen oxidation have shown that the differential stabilization/destabilization of active site oxidation states through either static or dynamic protein interactions can preferentially promote either the hydrogen oxidation or proton reduction direction of the reaction. This revealed how an enzymatic cofactor can impose bias in oxidation-reduction catalysis through various tuning mechanisms by protein scaffold interactions. The hypothesis based on achieving catalytic bias through the modulation of cofactor oxidation states critical for the reaction cycle can be extended more generally to other cofactor-based oxidation-reductions catalysts. The current understanding of catalytic bias has significant implications for the design of synthetic catalysts used in industrial settings, as well as providing a greater fundamental understanding of the factors that control metabolic processes in all life.

catalysis↗
DOE OSTI2025

CFD modeling of non-catalytic, partial-oxidation engine reformer for flare mitigation

Flaring associated natural gas is commonly employed in the oil and gas industry to reduce methane (CH 4 ) emissions but generates carbon dioxide (CO 2 ) and harmful pollutants, significantly contributing to air pollution and posing risks to public health. To mitigate this impact, M2X Energy Inc. has developed a small-scale, modular gas-to-methanol system. This system features an engine reformer that performs fuel-rich partial oxidation of wellhead gas to produce syngas—a mixture of carbon monoxide (CO) and hydrogen (H 2 )—followed by a downstream reactor for methanol synthesis. This study focused on computational fluid dynamics (CFD) modeling of the engine reformer to simulate partial oxidation chemistry, predict the rich-burn operating limit, and assess syngas quality, ultimately aiding in design and operational optimization. The CFD model, developed within a Reynolds-Averaged Navier-Stokes (RANS) turbulence framework, incorporated sub-models for turbulent combustion, a chemical mechanism with polycyclic aromatic hydrocarbon (PAH) pathways, and soot emissions to accurately capture the fuel-rich, turbulent jet ignition and combustion processes. Model validation against experimental data showed good agreement across pre- and main-chamber pressures, apparent heat release rates, and exhaust gas concentrations of key species (H 2 , CO, CO 2 , CH 4 ) for varying intake equivalence ratios. Here, the model identified a rich-burn operating limit near a fuel-air equivalence ratio of 2.35, consistent with experimental observations. Furthermore, syngas quality analysis revealed that extending the rich-burn limit through engine reformer optimization could enhance syngas production, contributing to higher methanol synthesis efficiency.

Computational Fluid Dynamics↗
DOE OSTI2025

Heterogeneous and Framework-Bound Copper Species Contribute to Catalytic Partial Methane Oxidation in Cu–Chabazite Zeolites

The relationship between continuous partial methane oxidation (PMO) rates and Cu site speciation in Cu-CHA zeolite catalysts is explored through differential rate measurements across a series of samples of varying compositions combined with density functional theory, first-principles thermodynamics, and statistical models that characterize Cu speciation. Under continuous PMO conditions (573 K, 0.07 kPa O 2 , 3 kPa H 2 O), Cu ions are shown to anchor to the CHA framework in both monomeric (Z 2 Cu and Z 2 CuH 2 O) and dimeric (O- and OH-bridged Cu) forms that are sensitive to the identity of the local framework anchoring site. Consequently, across the studied compositional range, Cu-CHA catalysts are predicted to contain a mixture of monomeric and dimeric Cu sites. Cu-normalized CH 3 OH formation rates extrapolated to zero conversion reflect contributions from multiple site types. Predicted CH 3 OH formation rates indicate that the Cu site reactivity toward CH 4 is influenced by zeolite composition and is likely limited by the reduction half-cycle.

03 NATURAL GAS↗
DOE OSTI2023

Perovskite evolution on La modified Mn 1.5 Co 1.5 O 4 spinel through thermal ageing with enhanced oxidation activity: Is sintering always an issue?

Non-precious metal oxides have great potential in catalytic deep oxidation of emitted hydrocarbons to help address various environmental pollution concerns. However, sintering issue is a stumbling block in practical application upon long-term high-temperature operation or thermal shock experience. Herein, La was applied to modify Mn 1.5 Co 1.5 O 4 spinel to get a highly active oxidation catalyst with exceptional stability against high-temperature thermal ageing treatment. With thermal ageing at 750 °C for 100 h, the La modified Mn–Co composite reached 90 % conversion in toluene oxidation at 265 °C under the high WHSV of 120,000 mL g -1 h -1 , while this value increased to 312 °C over blank Mn–Co spinel. The addition of La not only inhibited the growth of spinel nanocrystals, but also brought about perovskite formation through sintering, generating perovskite-spinel interfaces, thus enhancing both activity and stability. Meanwhile, the La modified Mn–Co spinel exhibited superior performance in presence of water or sulfur dioxide after thermal ageing treatment. In conclusion, this work offers a versatile strategy to design anti-sintering and active oxidation nanocatalysts based on non-precious metal oxides for industrial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Metal–Organic Frameworks as a Tunable Platform to Deconvolute Stereoelectronic Effects on the Catalytic Activity of Thioanisole Oxidation

The local environment of a metal active site plays an important role in affecting catalytic activity and selectivity. In re-cent studies, tailoring the behavior of a molybdenum-based active site via modulation of the first coordination sphere has led to improved thioanisole oxidation performance, but disentangling electronic effects from steric influences that arise from these modifications is nontrivial, especially in heterogeneous systems. To this end, the tunability of metal–organic frameworks (MOFs) makes them promising scaffolds for controlling the coordination sphere of a heterogene-ous, catalytically-active metal site while offering additional, attractive features such as crystallinity and high porosity. Herein, we report a variety of MOF-supported Mo species, which were investigated for catalytic thioanisole oxidation to methyl phenyl sulfoxide and/or methyl phenyl sulfone using tert-butyl hydroperoxide (tBHP) as the oxidant. In particular, MOFs of contrasting node architectures were targeted, presenting a unique opportunity to investigate ste-reoelectronic control of Mo active sites in a systematic manner. A Zr 6 -based MOF, NU-1000, was employed along with its sulfated analog Zr 6 -based NU-1000-SO 4 to anchor a dioxymolybdenum species, which enabled examination of sup-port-mediated active site polarizability on catalytic performance. In addition, a MOF containing a mixed metal node, Mo-MFU-4l, was used to probe the stereoelectronic impact of an N-donor ligand environment on the catalytic activity of the transmetalated Mo center. Furthermore, characterization techniques including single crystal X-ray diffraction, were concomi-tantly used with reaction kinetic profiles to better comprehend the dynamics of different Mo active sites, thus correlat-ing structural change with activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reactivity of Pd–MO 2 encapsulated catalytic systems for CO oxidation

In this work, we present an investigation aimed at characterizing and understanding the synergistic interactions in encapsulated catalytic structures between the metal core (i.e., Pd) and oxide shell (i.e., TiO 2 , ZrO 2 , and CeO 2 ). Encapsulated catalysts were synthesized using a two-step procedure involving the initial colloidal synthesis of Pd nanoparticles (NPs) capped by various ligands and subsequent sol–gel encapsulation of the NPs with porous MO 2 (M = Ti, Zr, Ce) shells. The encapsulated catalytic systems displayed higher activity than the Pd/MO 2 supported structures due to unique physicochemical properties at the Pd–MO 2 interface. Pd@ZrO 2 exhibited the highest catalytic activity for CO oxidation. Results also suggested that the active sites in Pd encapsulated by an amorphous ZrO 2 shell structure were significantly more active than the crystalline oxide encapsulated structures at low temperatures. Furthermore, CO DRIFTS studies showed that Pd redispersion occurred under CO oxidation reaction conditions and as a function of the oxide shell composition, being observed in Pd@TiO 2 systems only, with potential formation of smaller NPs and oxide-supported Pd clusters after reaction. This investigation demonstrated that metal oxide composition and (in some cases) crystallinity play major roles in catalyst activity for encapsulated catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nitrogen-doped char as a catalyst for wet oxidation of phenol-contaminated water

Catalytic wet oxidation (CWO) of aqueous effluents rich in organic compounds is a very promising technology for the treatment of liquid wastes from biomass conversion processes. CWO reactions occur through the formation of free radical species, produced in the presence of an oxidant, which act on organic contaminates in the effluent. Although the reaction is well known, there exists a lack of affordable catalysts to conduct this process at the lower temperatures and pressures in novel bioenergy processes. Here, this study assessed the catalytic effect of nitrogen-doped chars as such an option. Phenol in aqueous solution was used as a model waste effluent. Treatment was conducted at moderate temperatures (190 to 260 °C), oxygen partial pressure of 1 MPa, and reaction times of 15, 30, and 45 min in stainless steel and glass-lined tube reactors. High pressure liquid chromatography (HPLC) analyses of the products quantified phenol and by-product concentrations used in the calculation of reaction activation energy. The char catalyst was studied by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) in order to gain insight into its structure and surface composition. The results indicate that nitrogen-doped char catalysts accelerate the oxidation of phenol by decreasing its reaction activation energy from 82.2 kJ/mol (non-catalyzed) to 40.4 kJ/mol (catalyzed). An analysis from first principles using density functional theory (DFT) was conducted to ascertain which N functional group has the most significant impact on free radical formation in the presence of oxygen. Among all the N functional groups studied, the dipyridinic functional groups showed the most promising characteristics to facilitate the formation of hydroxyl free radicals.

Advanced Oxidation Processes for Organic Pollutant↗
DOE OSTI2023

Surface Lattice-Embedded Pt Single-Atom Catalyst on Ceria-Zirconia with Superior Catalytic Performance for Propane Oxidation

Tuning the metal–support interaction and coordination environment of single-atom catalysts can help achieve satisfactory catalytic performance for targeted reactions. Herein, via the facile control of calcination temperatures for Pt catalysts on pre-stabilized Ce 0.9 Zr 0.1 O 2 (CZO) support, Pt single atoms (Pt 1 ) with different strengths of Pt–CeO 2 interaction and coordination environment were successfully constructed. With the increase in calcination temperature from 350 to 750 °C, a stronger Pt–CeO 2 interaction and higher Pt-O-Ce coordination number were achieved due to the reaction between PtO x and surface Ce 3+ species as well as the migration of Pt 1 into the surface lattice of CZO. The Pt/CZO catalyst calcined at 750 °C (Pt/CZO-750) exhibited a surprisingly higher C 3 H 8 oxidation activity than that calcined at 550 °C (Pt/CZO-550). Here, through systematic characterizations and reaction mechanism study, it was revealed that the higher concentration of surface Ce 3+ species/oxygen vacancies and the stronger Pt–CeO 2 interaction on Pt/CZO-750 could better facilitate the activation of oxygen to oxidize C 3 H 8 into reactive carbonate/carboxyl species and further promote the transformation of these intermediates into gaseous CO 2 . The Pt/CZO-750 catalyst can be a potential candidate for the catalytic removal of hydrocarbons from vehicle exhaust.

36 MATERIALS SCIENCE↗