Search NASA⌕ Search

SEARCH · Search NASA

Results for “Catalytic surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Catalytic Performance and Near-Surface X-ray Characterization of Titanium Hydride Electrodes for the Electrochemical Nitrate Reduction Reaction

The electrochemical nitrate reduction reaction (NO3RR) on titanium introduces significant surface reconstruction and forms titanium hydride (TiH x , 0 < x ≤ 2). With ex situ grazing-incidence X-ray diffraction (GIXRD) and X-ray absorption spectroscopy (XAS), we demonstrated near-surface TiH2 enrichment with increasing NO3RR applied potential and duration. This quantitative relationship facilitated electrochemical treatment of Ti to form TiH 2 /Ti electrodes for use in NO3RR, thereby decoupling hydride formation from NO 3 RR performance. A wide range of NO 3 RR activity and selectivity on TiH2/Ti electrodes between -0.4 and -1.0 VRHE was observed and analyzed with density functional theory (DFT) calculations on TiH 2 (111). Finally, this work underscores the importance of relating NO 3 RR performance with near-surface electrode structure to advance catalyst design and operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Operando High-Energy-Resolution X-ray Spectroscopy of Evolving Cu Nanoparticle Electrocatalysts for CO 2 Reduction

Advances in electrocatalysis research rely heavily on building a thorough mechanistic understanding of catalyst active sites under realistic operating conditions. Only recently have techniques emerged that enable sensitive spectroscopic data collection to distinguish catalytically relevant surface sites from the underlying bulk material under applied potential in the presence of an electrolyte layer. Here, we demonstrate that operando high-energy-resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XAS) is a powerful spectroscopic method which offers critical surface chemistry insights in CO 2 electroreduction with sub-electronvolt energy resolution using hard X-rays. Combined with the high surface area-to-volume ratio of 5 nm copper nanoparticles, operando HERFD-XAS allows us to observe with clear evidence the breaking of chemical bonds between the ligands and the Cu surface as part of the ligand desorption process occurring under electrochemical potentials relevant for the CO 2 reduction reaction (CO 2 RR). In addition, the dynamic evolution of oxidation state and coordination number throughout the operation of the nanocatalyst was continuously tracked. With these results in hand, undercoordinated metallic copper nanograins are proposed to be the real active sites in the CO 2 RR. In conclusion, this work emphasizes the importance of HERFD-XAS compared to routine XAS in catalyst characterization and mechanism exploration, especially in the complicated electrochemical CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Assessing the quality of large-area monolayer graphene grown on liquid copper for size-selective ionic/molecular membrane separations

Monolayer graphene growth on liquid copper (Cu) has attracted attention due to advantages of a flat/smooth catalytic growth surface, high synthesis temperature (>1080 °C) as well as the possibility of forming graphene domains that are mobile on the liquid Cu with potential to minimize grain boundary defects and self-assemble into a continuous monolayer film. However, the quality of monolayer graphene grown on liquid copper and its suitability for size-selective ionic/molecular membrane separations has not been evaluated/studied. Here, we probe the quality of monolayer graphene grown on liquid Cu (via a metallurgical process, HSMG ® ) using Scanning Electron Microscope (SEM), High-resolution transmission electron microscope (HR-TEM), Raman spectroscopy and report on a facile approach to assess intrinsic sub-nanometer to nanometer-scale defects over centimeter-scale areas. We demonstrate high transfer yields of monolayer graphene (>93% coverage) from the growth substrate to polyimide track etched membrane (PITEM, pore diameter ~200 nm) supports to form centimeter-scale atomically thin membranes. Next, we use pressure-driven transport of ethanol to probe defects > 60 nm and diffusion-driven transport of analytes (KCl ~0.66 nm, L-Tryptophan ~0.7–0.9 nm, Vitamin B12 ~1–1.5 nm and Lysozyme ~3.8–4 nm) to probe nanoscale and sub-nanometer scale defects. Diffusive transport confirms the presence of intrinsic sub-nanometer to nanometer scale defects in monolayer graphene grown on liquid Cu are no less than that in high-quality graphene synthesized via chemical vapor deposition (CVD) on solid Cu. Our work not only benchmarks quality of graphene grown on liquid copper for membrane applications but also provides fundamental insights into the origin of intrinsic defects in large-area graphene synthesized via bottom-up processes for membrane applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Epitaxial Electrodeposition of Wide Bandgap Semiconductors for Energy Conversion and Storage

The focus of this project was to electrodeposit epitaxial films and nanostructures of inorganic materials. Although electrodeposition is normally associated with the electroplating of metals, the emphasis in this work was the deposition of compound materials such as metal oxides, semiconductors, catalysts, and magnetic materials. An electrochemical/chemical approach was used, in which an electrochemical redox reaction was followed by a chemical reaction to produce the product. The materials were deposited as epitaxial thin films or nanostructures onto a single-crystal substrate that determined their in-plane and out-of-plane orientation. Epitaxial films can have enhanced properties due to the lack of grain boundaries. They can also produce catalytic materials which have enhanced reactivity due to the exposure of the most catalytically active surface. A method was developed to produce inexpensive single-crystal-like metal foils that could be used as the substrate to deposit materials for applications such as flexible electronics. It was also demonstrated that epitaxial films of inorganic materials could be produced by a simple spin-coating technique.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrocatalytic alkene epoxidation at disrupted metal ensembles in blended electrolytes

The project aims to achieve a molecular understanding of oxygen-atom transfer from water to alkenes at electrocatalytic interfaces. Molecular oxygen is the most common oxygen-atom source for epoxidations, and our group is developing sustainable routes through which epoxidation of olefins is achieved using water as the oxygen source. This route can improve the safety of the reaction while also co-producing hydrogen, demonstrating the relevance of this reaction to the energy transition. If successful in our efforts, we may enable oxygen-atom transfer reactions at the anode of water electrolyzers in the place of conventional oxygen evolution, allowing for the synthesis of sustainable value-added co-products. In this vein, we explore several approaches to acquiring high selectivity toward epoxidation over competing reactions, such as oxygen evolution. One of our aims is to allow for rational control of epoxide selectivity by disrupting contiguous metal ensembles at the surface of catalytic metal oxide nanoparticles. Specifically, we aim to synthesize single-atom, few-atom, and many-atom clusters supported on metal oxides and study the mechanism of oxygen evolution and alkene epoxidation on these materials. Thus, this approach will determine the impact of disrupting metal ensembles on the selectivity for alkene epoxidation versus oxygen evolution in blended electrolytes. Another aim is to develop a molecular-level understanding of how a blended electrolyte (i.e., a mixture of aqueous and organic solvents) influences rates of alkene epoxidation versus oxygen evolution. In other words, we are interested in understanding the catalytic influence of the solvent, as our preliminary work shows that the selectivity and reactivity of epoxidation depend strongly on the solvent composition. This investigation includes blended electrolytes and electrolytes containing redox mediator species that improve selectivity toward the desired epoxidation reaction. Overall, our proposed work will help to provide a detailed molecular-level picture of how solvents interact with substrates at the electrode-electrolyte interface, including their involvement in proton transfer reactions and screening of electric fields.

14 SOLAR ENERGY↗
DOE OSTI2022

BODIPY and dipyrrin as unexpected robust anchoring groups on TiO 2 nanoparticles

Covalent attachment of molecules to metal oxide surfaces typically demands the presence of an anchoring group that in turn requires synthetic steps to introduce. BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) chromophores have long been used in dye-sensitized solar cells, but carboxylic acid groups typically had to be installed to act as surface anchors. We now find that even without the introduction of such anchors, the unmodified BODIPY can bind to TiO 2 surfaces via its BF 2 group through boron–oxygen surface bonds. Dipyrrin, the parent molecule of BODIPY, is also capable of binding directly to TiO 2 surfaces, likely through its chelating nitrogen atoms. These binding modes prove to be even more robust than that of an installed carboxylate and offer a new way to attach molecular complexes to surfaces for (photo)catalytic applications since, once bound, we show that surface bound BODIPY and dipyrrin derivatives exhibit ultrafast photoinjection of electrons into the conduction band of TiO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic resonance theory: Circumfluence of programmable catalytic loops

Chemical reactions on heterogeneous catalyst surfaces exhibit complex networks of elementary reactions with multiple pathways to fluid phase products, sometimes leading to surface reaction loops consisting of a closed cycle reaction pathway. While conventional catalysts at steady state exhibit zero net flux in either direction around a catalytic loop, the loop turnover frequency of three-species surface loops was evaluated in this work via microkinetic modeling to assess the reaction loop behavior resulting from a catalytic surface oscillating between two or more surface energy states. For dynamic heterogeneous catalysts undergoing applied oscillations of surface energy (i.e., programs), surface reaction loops of three species were shown to exhibit non-zero net flow of molecules around the loop, with the extent of loop turnover frequency varying with the applied frequency and amplitude of a sinusoidal or square wave oscillation. Alternatively, some dynamic surface reactions exhibited oscillations only between two surface species or resulted in surfaces covered by a single species at all times. Here, more complex behavior was observed for dynamic surface programs of three distinct electronic states, with the temporal order of applied states controlling the direction of flow of molecules within a three-molecule surface loop. Catalytic loops have the potential to limit overall catalytic reaction rates and use energy in programmable catalysts, while some applications could purposely impose non-zero loop turnover frequency for improved surface reaction control.

Catalysis↗
DOE OSTI2020

Steam-Induced Coarsening of Single-Unit-Cell MFI Zeolite Nanosheets and Its Effect on External Surface Brønsted Acid Catalysis

Commonly used methods to assess crystallinity, micro-/mesoporosity, Brønsted acid site density and distribution (in micro- vs. mesopores), and catalytic activity suggest nearly invariant structure and function for aluminosilicate zeolite MFI two-dimensional nanosheets before and after superheated steam treatment. Yet, pronounced reaction rate decrease for benzyl alcohol alkylation with mesitylene, a reaction that cannot take place in the zeolite micropores, is observed. Transmission electron microscopy images reveal pronounced changes in nanosheet thickness, aspect ratio and roughness indicating that nanosheet coarsening and the associated changes in the external (mesoporous) surface structure are responsible for the changes in the external surface catalytic activity. Finally, superheated steam treatment of hierarchical zeolites can be used to alter nanosheet morphology and regulate external surface catalytic activity while preserving micro- and mesoporosity, and micropore reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Surface intermediates identified using IR spectroscopy during the catalytic oxidation of C 2 H 6 on IrO 2 (1 1 0) at near-ambient pressures

Characterizing surface intermediates during catalysis is essential for developing mechanistic models of catalytic reactions and for identifying rate-controlling steps. Here, in this work, we used polarization-dependent reflection absorption infrared spectroscopy (PD-RAIRS) to investigate surface intermediates that form on IrO 2 (1 1 0) during the catalytic oxidation of C 2 H 6 at pressures near 0.5 Torr. Our results show that adsorbed CO and HCO 2 are the only intermediates detectable with PD-RAIRS across a wide range of temperatures and reactant compositions during complete C 2 H 6 oxidation, giving rise to dominant peaks at about 2093 and 1310 cm −1 , respectively. These assignments were corroborated by RAIRS measurements following CO and HCOOH adsorption in ultrahigh vacuum, RAIRS with C 2 H 6 – 18 O 2 mixtures during catalysis and vibrational frequencies and IR intensities computed using density functional theory. We find that increasing the C 2 H 6 mole fraction in the reaction mixture raises the CO surface coverage relative to HCO 2 , correlating with increasing catalytic oxidation rates. The formation of CO and HCO 2 surface species at temperatures well below catalytic ignition indicates that the overall rate of C 2 H 6 oxidation on IrO 2 (1 1 0) is governed by steps late in the reaction sequence, such as H 2 O formation, CO oxidation and HCO 2 dehydrogenation. These findings provide key insight into the mechanism of alkane oxidation on IrO 2 (1 1 0) and valuable input for first-principles microkinetic modeling.

Pope, Connor [Univ. of Florida, Gainesville, FL (U↗
DOE OSTI2020

Steam‐Induced Coarsening of Single‐Unit‐Cell MFI Zeolite Nanosheets and Its Effect on External Surface Brønsted Acid Catalysis

Abstract Commonly used methods to assess crystallinity, micro‐/mesoporosity, Brønsted acid site density and distribution (in micro‐ vs. mesopores), and catalytic activity suggest nearly invariant structure and function for aluminosilicate zeolite MFI two‐dimensional nanosheets before and after superheated steam treatment. Yet, pronounced reaction rate decrease for benzyl alcohol alkylation with mesitylene, a reaction that cannot take place in the zeolite micropores, is observed. Transmission electron microscopy images reveal pronounced changes in nanosheet thickness, aspect ratio and roughness indicating that nanosheet coarsening and the associated changes in the external (mesoporous) surface structure are responsible for the changes in the external surface catalytic activity. Superheated steam treatment of hierarchical zeolites can be used to alter nanosheet morphology and regulate external surface catalytic activity while preserving micro‐ and mesoporosity, and micropore reaction rates.

Guefrachi, Yasmine↗
DOE OSTI2021

Ethane Dehydrogenation on Single and Dual Centers of Ga-modified γ-Al 2 O 3

Density-functional theory calculations and microkinetic analysis are used to investigate the efficacy of Ga-modified γ-Al 2 O 3 (110) surfaces for the catalytic dehydrogenation of ethane and elucidate the synergy between Ga and Al sites. The model surfaces are modified by either Ga grafting or doping. We consider and analyze numerous active sites and rank them using microkinetic analysis. The kinetic parameters obtained from microkinetic modelling are compared with experimental values for ethane dehydrogenation over Ga 2 O 3 -Al 2 O 3 mixed oxides prepared by co-precipitation. The dominant reaction pathway proceeds via heterolytic C-H bond dissociation to a surface proton and a metal-carbanion intermediate that undergoes β-hydride elimination. We find that grafted Ga sites are catalytically inactive. In contrast, Ga-doped sites exhibit fivefold enhancement in catalytic activity when compared to the sites on pristine Al 2 O 3 , owed to the synergy between neighboring AlIII and GaIV sites. Furthermore, we model and investigate the effect of surface hydroxylation, demonstrate how surface water interferes with the aforementioned synergy between AlIII and GaIV sites and discuss the implications for the catalytic activity of the modified surfaces. Here, an increase in the partial pressure of H 2 O significantly increases the apparent activation energies of dehydrogenation and interestingly changes the most active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Unraveling In-Situ Formation of Surface Nickel Nitride Structures in Plasma-Assisted Catalytic Ammonia Synthesis

We report the in situ formation of Ni nitride for plasma-assisted ammonia synthesis. Both the surface nitrogen concentration and the ammonia formation rate exhibit dependence on the N 2 :H 2 feed ratio. The maximum surface nitrogen concentration occurs at a N 2 :H 2 ratio of 4:1, and the maximum catalytic activity occurs at 2:1. In contrast, the formation of gas phase radicals is less sensitive to feed composition, indicating that Ni nitride is more kinetically relevant to ammonia production than gas-phase radicals. The plasma-induced formation of Ni nitride is therefore proposed to be a critical contributor to the synergistic effects in plasma-assisted catalytic ammonia synthesis. Additionally, Ni nitride alters the surface reaction mechanism of plasma-assisted ammonia synthesis, with the rate-determining-step (RDS) shifting to surface-bound NH 3 formation rather than N 2 activation at temperatures below 373 K. These findings provide mechanistic insight that opens opportunities for optimizing the performance of plasma-assisted catalytic ammonia synthesis

Ammonia↗
DOE OSTI2024

Can the Rate of a Catalytic Turnover Be Altered by Ligands in the Absence of Direct Binding Interactions?

Second sphere coordination effects ubiquitous in enzymatic catalysis occur through direct interactions, either covalent or non-covalent, with reaction intermediates and transition states. Here, we present herein evidence of indirect second sphere coordination effects in which ligation of water/alkanols far removed from the primary coordination sphere of the active site nevertheless alter energetic landscapes within catalytic redox cycles in the absence of direct physicochemical interactions with surface species mediating catalytic turnovers. Density functional theory, in situ X-ray absorption and infrared spectroscopy, and a wide array of steady-state and transient CO oxidation rate data suggest that the presence of peripheral water renders oxidation half-cycles within two-electron redox cycles over μ m -oxo-bridged trimers in MIL-100(M) more kinetically demanding. Communication between ligated water and the active site appears to occur through the Fe-O-Fe backbone, as inferred from spin density variations on the central μ m -oxygen 'junction'. Evidence is provided for the generality of these second sphere effects in that they influence different types of redox half-cycles or metals, and can be amplified or attenuated through choice of coordinating ligand. Specifically in the case of MIL-100(M) materials, the Cr isostructure can be made to kinetically mimic the Fe variant by disproportionately hindering oxidation half-cycles relative to the reduction half-cycles. Kinetic and spectroscopic inferences presented here significantly expand both the conceptual definition of second sphere effects as well as the palette of synthetic levers available for tuning catalytic redox performance through chemical ligation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Amorphizing noble metal chalcogenide catalysts at the single-layer limit towards hydrogen production

Rational design of noble metal catalysts with the potential to leverage efficiency is vital for industrial applications. Such an ultimate atom-utilization efficiency can be achieved when all noble metal atoms exclusively contribute to catalysis. In this work, we demonstrate the fabrication of a wafer-size amorphous PtSex film on a SiO 2 substate via a low-temperature amorphization strategy, which offers single-atom-layer Pt catalysts with high atom-utilization efficiency (~26 wt%). This amorphous PtSex (1.2 < x < 1.3) behaves as a fully activated surface, accessible to catalytic reactions, and features a nearly 100% current density relative to a pure Pt surface and reliable production of sustained high-flux hydrogen over a 2 inch wafer as a proof-of-concept. Furthermore, an electrolyser is demonstrated to generate a high current density of 1,000 mA cm –2 . Such an amorphization strategy is potentially extendable to other noble metals, including the Pd, Ir, Os, Rh and Ru elements, demonstrating the universality of single-atom-layer catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unexpected trends in the enhanced Ce 3+ surface concentration in ceria–zirconia catalyst materials

Despite the immense importance of ceria–zirconia solid solutions in heterogeneous catalysis, and the growing consensus that catalytic activity correlates with the concentration of reduced Ce 3+ species and accompanying oxygen vacancies, the extent of reduction at the surfaces of these materials, where catalysis occurs, is unknown. Using angle-resolved X-ray Absorption Near Edge Spectroscopy (XANES), we quantify under technologically relevant conditions the Ce 3+ concentration in the surface (2–3 nm) and bulk regions of ceria–zirconia films grown on single crystal yttria-stabilized zirconia, YSZ (001). In all circumstances, we observe substantial Ce 3+ enrichment at the surface relative to the bulk. Surprisingly, the degree of enhancement is highest in the absence of Zr. This behavior stands in direct contrast to that of the bulk in which the Ce 3+ concentration monotonically increases with increasing Zr content. Overall, these results suggest that while Zr enhances the oxygen storage capacity in ceria, undoped ceria may have higher surface catalytic activity. They further urge caution in the use of bulk properties as surrogate descriptors for surface characteristics and hence catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe 3 O 4 (001)

Understanding the role of surface structure and hydroxylation in catalytic reactions on metal oxide surfaces is important for developing a mechanistic insight into the complex interface processes. Here, we investigate the reactivity of formic acid on reconstructed Fe 3 O 4 (001) using a combination of X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, temperature-programmed reaction spectroscopy, low energy electron diffraction, and electronic structure calculations. We find that formic acid initially dissociates at low temperatures (< 80 K) into bidentate formate and a hydroxyl up to an initial dosed coverage of two HCOOH per Fe 3 O 4 (001) unit cell. At higher temperatures (> 450 K), formate largely decomposes along the dehydration pathway, producing CO and H 2 O, with dehydrogenation to CO 2 being a minority side reaction. As a first step, water formation leads to surface oxygen extraction via the Mars-van Krevelen mechanism. Computational studies reveal formate embedded in oxygen vacancies as a key intermediate in the CO formation mechanism. CO formation proceeds via two reaction pathways with desorption that peaks at 530 K on the hydroxyl-rich surface and 560 K on the hydroxyl-deficient surface. Atomic hydrogen coadsorption experiments and ab initio calculations reveal that the presence of surface hydroxyls reduces the CO formation barrier. Furthermore, these results highlight the complex interactions between substrate and intermediate species occurring during reactions on metal oxide surfaces.

Adsorption↗
DOE OSTI2020

Breaking Simple Scaling Relations through Metal–Oxide Interactions: Understanding Room-Temperature Activation of Methane on M/CeO 2 (M = Pt, Ni, or Co) Interfaces

The clean activation of methane at low temperatures remains an eminent challenge and a field of competitive research. In particular, on late transition metal surfaces such as Pt(111) or Ni(111), higher temperatures are necessary to activate the hydrocarbon molecule, but a massive deposition of carbon makes the metal surface useless for catalytic activity. However, on very low-loaded M/CeO 2 (M = Pt, Ni, or Co) surfaces, the dissociation of methane occurs at room temperature, which is unexpected considering simple linear scaling relationships. This intriguing phenomenon has been studied using a combination of experimental techniques (ambient-pressure X-ray photoelectron spectroscopy, time-resolved X-ray diffraction, and X-ray absorption spectroscopy) and density functional theory-based calculations. The experimental and theoretical studies show that the size and morphology of the supported nanoparticles together with strong metal–support interactions are behind the deviations from the scaling relations. These findings point toward a possible strategy for circumventing scaling relations, producing active and stable catalysts that can be employed for methane activation and conversion.

03 NATURAL GAS↗