Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collector angles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Amorphous Metallic NiFeP: A Conductive Bulk Material Achieving High Activity for Oxygen Evolution Reaction in Both Alkaline and Acidic Media

Here, the intrinsic catalytic activity at 10 mA cm –2 for oxygen evolution reaction (OER) is currently working out at overpotentials higher than 320 mV. A highly efficient electrocatalyst should possess both active sites and high conductivity; however, the loading of powder catalysts on electrodes may often suffer from the large resistance between catalysts and current collectors. This work reports a class of bulk amorphous NiFeP materials with metallic bonds from the viewpoint of electrode design. The materials reported here perfectly combine high macroscopic conductivity with surface active sites, and can be directly used as the electrodes with active sites toward high OER activity in both alkaline and acidic electrolytes. Specifically, a low overpotential of 219 mV is achieved at the geometric current density 10 mA cm –2 in an alkaline electrolyte, with the Tafel slope of 32 mV dec –1 and intrinsic overpotential of 280 mV. Meanwhile, an overpotential of 540 mV at 10 mA cm –2 is attained in an acidic electrolyte and stable for over 30 h, which is the best OER performance in both alkaline and acidic media. This work provides a different angle for the design of high–performance OER electrocatalysts and facilitates the device applications of electrocatalysts.

36 MATERIALS SCIENCE↗

Sheath effects on current collection by particle detectors with narrow acceptance angles

Restriction of the aperture acceptance angle of an ion or electron trap on an attracting spacecraft significantly alters the volt-ampere characteristics of the instrument in a low Mach number plasma. It is shown when the angular acceptance of the aperture is restricted the current to the collector tends to be independent of the Debye length. Expressions for the RPA characteristics for both a thin sheath and a thick sheath are derived; and it is shown that as the aperture is narrowed the curves tend toward equivalence.

Singh, N.↗

Lunar and Planetary Science XXXVI, Part 13

Contents include the following: A Fast, Non-Destructive Method for Classifying Ordinary Chondrite Falls Using Density and Magnetic Susceptibility. An Update on Results from the Magnetic Properties Experiments on the Mars Exploration Rovers, Spirit and Opportunity. Measurement Protocols for In Situ Analysis of Organic Compounds at Mars and Comets. Piping Structures on Earth and Possibly Mars: Astrobiological Implications. Uranium and Lead in the Early Planetary Core Formation: New Insights Given by High Pressure and Temperature Experiments. The Mast Cameras and Mars Descent Imager (MARDI) for the 2009 Mars Science Laboratory. MGS MOC: First Views of Mars at Sub-Meter Resolution from Orbit. Analysis of Candor Chasma Interior Layered Deposits from OMEGA/MEX Spectra. Analysis of Valley Networks on Valles Marineris Plateau Using HRSC/MEX Data. Solar Abundance of Elements from Neutron-Capture Cross Sections. Preliminary Evaluation of the Secondary Ion/Accelerator Mass Spectrometer, MegaSIMS. Equilibrium Landforms in the Dry Valleys of Antarctica: Implications for Landscape Evolution and Climate Change on Mars. Continued Study of Ba Isotopic Compositions of Presolar Silicon Carbide Grains from Supernovae. Paleoenviromental Evolution of the Holden-Uzboi Area. Stability of Magnesium Sulfate Minerals in Martian Environments. Tungsten Isotopic Constraints on the Formation and Evolution of Iron Meteorite Parent Bodies. Migration of Dust Particles and Volatiles Delivery to the Inner Planets. On the Sitting of Trapped Noble Gases in Insoluble Organic Matter of Primitive Meteorites. Trapping of Xenon Upon Evaporation-Condensation of Organic Matter Under UV Irradiation: Isotopic Fractionation and Electron Paramagnetic Resonance Analysis. Stability of Water on Mars. A Didactic Activity. Analysis of Coronae in the Parga Chasma Region, Venus. Photometric and Compositional Surface Properties of the Gusev Crater Region, Mars, as Derived from Multi-Angle, Multi-Spectral Investigation of Mars Express HRSC Data. Mapping Compositional Diversity on Mars: Spatial Distribution and Geological Implications. A New Simulation Chamber for Studying Planetary Environments. Folded Structure in Terra Sirenum. Mars. Nitrogen-Noble Gas Static Mass Spectrometry of Genesis Collector Materials. Neon Isotope Heterogeneity in the Terrestrial Mantle: Implication for the Acquisition of Volatile Elements in Terrestrial Planets. The Cosmic Clock, the Cycle of Terrestrial Mass Extinctions.

Source record↗

Electrospinning of ultra-high molecular weight polymers into aligned nanofibers and their application in chemical separations

Ultra-high molecular weight (UHMW, >10 6 g mol −1 ) vinyl polymers are increasingly accessible through photoiniferter polymerization, yet their behavior in electrospinning has received comparatively little attention. Here, we explore the electrospinning of UHMW poly(methyl acrylate), poly(methyl methacrylate), poly(N,N-dimethylacrylamide), and poly(styrene-co-pentafluorostyrene) synthesized by photoiniferter polymerization, with number-average molecular weights (M n ) greater than 1000 kDa and dispersities below 1.4. UHMW polymers form stable Taylor cones and discrete fibers at solution concentrations as low as 0.5 wt% due to their large number of entanglements, a threshold unachievable with low molecular weight (M n = 20–54 kDa) polymers of the same chemistry. Using poly(methyl methacrylate) and poly(styrene-co-pentafluorostyrene) as model systems, we demonstrate that fiber diameter can be tuned from 350 nm to 20 μm through systematic variation of polymer concentration (0.01 to 4 wt%) and flow rate (0.5 to 10 mL h −1 ). Additionally, we find that collector rotation rate governs fiber alignment, with highly aligned mats obtained with drum rotation speeds of 1000 RPM. Reversing the polarity of the electric field during electrospinning reorients the surface chemistry of these fiber mats without altering their microscale morphology, shifting the water contact angle by 7° (89° to 96°) and providing a two-fold binding capacity enhancement in cationic dye uptake. These results show that the high entanglement densities of UHMW vinyl polymers shift the accessible electrospinning window to dilute solutions and that electric-field polarity is a useful lever to control the surface chemistry in the resulting fibers.

Marquez, Joshua D. [University of Florida, Gainesv↗

Optimization of spherical facets for parabolic solar concentrators

Solar concentrator designs which employ deployable hexagonal panels are being developed for space power systems. An offset optical configuration has been developed which offers significant system level advantages over previously proposed collector designs for space applications. Optical analyses have been performed which show offset reflector intercept factors to be only slightly lower than those for symmetric reflectors with the same slope error. Fluxes on the receiver walls are asymmetric but manageable by varying the tilt angle of the receiver. Greater producibility is achieved by subdividing the hexagonal panels into triangular mirror facets of spherical contour. Optical analysis has been performed upon these to yield near-optimum sizes and radii.

White, J. E.↗

Current collection in an anisotropic plasma

A general method is given to derive the current-potential relations in anisotropic plasmas. Orbit limit current is assumed. The collector is a conductive sphere or an infinite cylinder. Any distribution which is an arbitrary function of the velocity vector can be considered as a superposition of many mono-energetic beams whose current-potential relations are known. The results for two typical pitch angle distributions are derived and discussed in detail. The general properties of the current potential relations are very similar to that of a Maxwellian plasma except for an effective temperature which varies with the angle between the magnetic field and the charging surface. The conclusions are meaningful to generalized geometries.

Li, Wei-Wei↗

Current collection in an anisotropic collisionless plasma

A general method is given to derive the current-potential relations in anisotropic plasmas. Orbit limit current is assumed. The collector is a conductive sphere or an infinite cylinder. Any distribution which is an arbitrary function of the velocity vector can be considered as a superposition of many mono-energetic beams whose current-potential relations are known. The results for two typical pitch angle distributions are derived and discussed in detail. The general properties of the current potential relations are very similar to that of a Maxwellian plasma except for an effective temperature which varies with the angle between the magnetic field and the charging surface. The conclusions are meaningful to generalized geometries.

Li, Wei-Wei↗

Angular Distribution of Elastically Scattered Electrons Determined and Its Effect on Collector Performance Computed

It has been demonstrated that the suppression of secondary electron emission significantly improves the performance of electron beam collectors (ref. 1). However, a complete analysis of the effects of secondary electron emission with respect to collector performance has not been possible because of the lack of quantitative data on angular distributions of secondary electrons. Secondary electrons are emitted with energies ranging from near zero to the energy of the incident primary. For our purposes, we define elastically scattered electrons as secondary electrons within 20 percent of the incident energy. Elastically scattered electrons are of great concern because their energy allows them to follow trajectories that can carry them almost anywhere within the vacuum envelope. If these secondaries leave the collector and reenter the slow wave circuit, they can produce undesired signal distortion and oscillation.This apparatus, which was built by Krainsky (ref. 2), was used at the NASA Lewis Research Center to obtain detailed measurements of the angular distributions of elastically scattered secondaries. Data were obtained for three surfaces of significant interest to collector applications: highly polished copper, copper roughened by ion sputtering, and isotropic graphite. Lewis researchers discovered that elastically scattered electrons have a complex angular distribution that is strongly dependent on the atomic number and surface morphology of the target material, as well as the energy and angle of incidence of the primary beam. At low energies, secondary emission from polished copper in the chosen energy range is primarily directed back to the source of primary electrons (backscattering). Forward scattering increases with primary energy until, at high energies, forward scattering dominates the angular distribution. Although back-scattered secondaries dominate the distributions of the textured copper surface, the yield is substantially lower. From the standpoint of secondary emission, isotropic graphite is the most attractive material because it exhibits low yield and little back scattering.

Krainsky, Isay L.↗

Twisted nanocolumns for LIBs via phi-sweep method in ion assisted e–beam deposition

In this work, twisted nanostructured silicon-copper (with 19%at. copper) thin film is fabricated by glancing angle deposition phi-sweep process of ion beam assisted electron beam evaporation method. The thin film delivers 977 mAh g(-1) after 100 cycles, when cycled with 100 mA g(-1) rate and performs 280 mAh g(-1) at 2.5 A g(-1) rate. The morphological and the compositional particularities of the electrode might govern this noticeable cycle performance: Gaps among the nanostructures accommodate large volume changes and provide easy access to lithium ions for reacting with silicon to deliver high capacity. Plus, the direct connection of nanostructures to the current collector displays short lithium travelling distance promoting lithiation kinetic. Moreover, small intermetallics creating electronic conductive pathways enhance the reversibility. And finally, 5 min ion assisted deposition increases the adhesion of the film while avoiding possible delamination, hence quick failure of the electrode in the early stages of cycling.

electron beam evaporation method↗

Low-Energy Sputtering Research

An experimental study is described to measure low-energy (less than 600 eV) sputtering yields of molybdenum with xenon ions using Rutherford backscattering spectroscopy (RBS) and secondary neutral mass spectroscopy (SNMS). An ion gun was used to generate the ion beam. The ion current density at the target surface was approximately 30 (micro)A/sq cm. For RBS measurements, the sputtered material was collected on a thin aluminum strip which was mounted on a semi-circular collector plate. The target was bombarded with 200 and 500 eV xenon ions at normal incidence. The differential sputtering yields were measured using the RBS method with 1 MeV helium ions. The differential yields were fitted with a cosine fitting function and integrated with respect to the solid angle to provide the total sputtering yields. The sputtering yields obtained using the RBS method are in reasonable agreement with those measured by other researchers using different techniques. For the SNMS measurements, 150 to 600 eV xenon ions were used at 50deg angle of incidence. The SNMS spectra were converted to sputtering yields for perpendicular incidence by normalizing SNMS spectral data at 500 eV with the yield measured by Rutherford backscattering spectrometry. Sputtering yields as well as the shape of the yield-energy curve obtained in this manner are in reasonable agreement with those measured by other researchers using different techniques. Sputtering yields calculated by using two semi-spherical formulations agree reasonably well with measured data. The isotopic composition of secondary ions were measured by bombarding copper with xenon ions at energies ranging from 100 eV to 1.5 keV. The secondary ion flux was found to be enriched in heavy isotopes at low incident ion energies. The heavy isotope enrichment was observed to decrease with increasing impact energy. Beyond 700 eV, light isotopes were sputtered preferentially with the enrichment remaining nearly constant.

Ray, P. K.↗

Gravity induced flow cell

The flow cell includes first and second reservoirs having a selected volume containing a flowable redox electrode. A membrane separates charged and discharged material. An energy-extraction region includes electronically conductive porous current collectors through or adjacent to which the flowable redox electrodes flow and to which charge transfer occurs. Structure is provided for altering orientation of the flow cell whereby gravity induces flow of the flowable redox electrode between the first and second reservoirs to deliver power. By varying the angle of the cell, flow rate and power delivered on discharge or the charge rate on charge may be varied.

25 ENERGY STORAGE↗

Materials Characterization at Utah State University: Facilities and Knowledge-base of Electronic Properties of Materials Applicable to Spacecraft Charging

In an effort to improve the reliability and versatility of spacecraft charging models designed to assist spacecraft designers in accommodating and mitigating the harmful effects of charging on spacecraft, the NASA Space Environments and Effects (SEE) Program has funded development of facilities at Utah State University for the measurement of the electronic properties of both conducting and insulating spacecraft materials. We present here an overview of our instrumentation and capabilities, which are particularly well suited to study electron emission as related to spacecraft charging. These measurements include electron-induced secondary and backscattered yields, spectra, and angular resolved measurements as a function of incident energy, species and angle, plus investigations of ion-induced electron yields, photoelectron yields, sample charging and dielectric breakdown. Extensive surface science characterization capabilities are also available to fully characterize the samples in situ. Our measurements for a wide array of conducting and insulating spacecraft materials have been incorporated into the SEE Charge Collector Knowledge-base as a Database of Electronic Properties of Materials Applicable to Spacecraft Charging. This Database provides an extensive compilation of electronic properties, together with parameterization of these properties in a format that can be easily used with existing spacecraft charging engineering tools and with next generation plasma, charging, and radiation models. Tabulated properties in the Database include: electron-induced secondary electron yield, backscattered yield and emitted electron spectra; He, Ar and Xe ion-induced electron yields and emitted electron spectra; photoyield and solar emittance spectra; and materials characterization including reflectivity, dielectric constant, resistivity, arcing, optical microscopy images, scanning electron micrographs, scanning tunneling microscopy images, and Auger electron spectra. Further details of the instrumentation used for insulator measurements and representative measurements of insulating spacecraft materials are provided in other Spacecraft Charging Conference presentations. The NASA Space Environments and Effects Program, the Air Force Office of Scientific Research, the Boeing Corporation, NASA Graduate Research Fellowships, and the NASA Rocky Mountain Space Grant Consortium have provided support.

Dennison, J. R.↗

Optical Performance Prediction of Hyperlight Energy Collector With a New Optimized Secondary Reflector

This paper assesses the optical performance of a new linear Fresnel collector by Hyperlight Energy. It uses water as construction material to carry mini-size reflectors to save the cost. The secondary reflector adopts an optimal profile derived through a new adaptive optimization method by NREL. The optical performance of the optimal secondary reflector profile is also calculated at varying incidence angles. The results show that the secondary reflector profile possesses a constantly high performance over a wide range of incidence angle and exhibits its robustness.

Zhu, Guangdong↗

Generation of two-color terahertz radiation using Smith–Purcell emitter and periodic dielectric layers

This paper proposes and simulates three vacuum state devices each of which generates two-color terahertz radiation by Smith–Purcell emitter and dielectric layers. Each of the devices is a SiO{sub 2}-made vacuum tube consisting of a Smith–Purcell emitter located at the bottom of the tube and also periodic dielectric layers located at the top. Smith–Purcell structure is a metal grating above which electron beam is generated closely by the cathode and are collected by a collector in another side of the grating. The emitter generates two terahertz radiations including evanescent and coherent Smith–Purcell radiations. While the evanescent radiation is the first harmonic of the emitted radiation, coherent Smith–Purcell radiation is the second and dominant one. The coherent Smith–Purcell radiation is emitted in a specific angle calculated by Smith–Purcell relation. The emitted coherent Smith–Purcell radiation coincides with periodic grating dielectric layers made of Si and SiO{sub 2} on top of the vacuum tube, and the transmitted pulse is transformed to two-terahertz pulses. The output of each device is a two-color terahertz pulse. Two generated terahertz wavelengths are very applicable in pump–probe experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-stage Depressed Collectors (MDC) for efficiency improvements of UHF broadcast klystrons

The consumed primary power is reduced and the efficiency of traveling wave tubes is raised through the use of depressed collectors which passively convert potential energy into electric energy. Efficiency was kept with constant within a 3 dB range while the output power varied by 10 dB. Aspects to be considered in transferring this technology to UHF klystrons are the electron energy spectrum of the klystron and the magnitude of the injection angle required.

Kosmahl, H. G.↗

Sunlight collection system with asymmetric catadioptric optics

The system captures and concentrates sunlight for transmission to interior spaces or to a PV system. A solar collector uses arrayed refractive lenses, opposing concave focusing mirrors, and a movable coupling sheet forming part of a lightguide. The lenses and mirrors have an asymmetric shape, such as having aspect ratios of 3:4 or 1:2, so as to have an asymmetric aperture to better receive light at the different ranges of angles of the sun's rays over the course of a year. The long axis of the apertures is generally oriented in an East-West. The movable sheet contains small angled mirrors, and the sheet is translated to position the angled mirrors at the focal points of the sunlight for maximum deflection of the sunlight to an output of the collection system. A position sensor provides feedback regarding the position of the angled mirrors relative to the focal points.

Kozodoy, Peter↗

Photovoltaic array for Martian surface power

Missions to Mars will require electric power. A leading candidate for providing power is solar power produced by photovoltaic arrays. To design such a power system, detailed information on solar-radiation availability on the Martian surface is necessary. The variation of the solar radiation on the Martian surface is governed by three factors: (1) variation in Mars-Sun distance; (2) variation in solar zenith angle due to Martian season and time of day; and (3) dust in the Martian atmosphere. A major concern is the dust storms, which occur on both local and global scales. However, there is still appreciable diffuse sunlight available even at high opacity, so that solar array operation is still possible. Typical results for tracking solar collectors are also shown and compared to the fixed collectors. During the Northern Hemisphere spring and summer the isolation is relatively high, 2-5 kW-hr/sq m-day, due to the low optical depth of the Martian atmosphere. These seasons, totalling a full terrestrial year, are the likely ones during which manned mission will be carried out.

Appelbaum, J.↗

Photovoltaic arrays for Martian surface power

Missions to Mars will require electric power. A leading candidate for providing power is solar power produced by photovoltaic arrays. To design such a power system, detailed information on solar-radiation availability on the Martian surface is necessary. The variation of the solar radiation on the Martian surface is governed by three factors: (1) variation in Mars-sun distance; (2) variation on solar zenith angle due to Martian season and time of day; and (3) dust in the Martian atmosphere. A major concern is the dust storms, which occur on both local and global scales. However, there is still appreciable diffuse sunlight available even at high opacity, so that solar array operation is still possible. Typical results for tracking solar collectors are also shown and compared to the fixed collectors. During the Northern Hemisphere spring and summer the isolation is relatively high, 2-5 kW-hr/sq m-day due to the low optical depth of the Martian atmosphere. These seasons, totalling a full terrestrial year, are the likely ones during which manned mission will be carried out.

Appelbaum, Joseph↗