Search NASA⌕ Search

SEARCH · Search NASA

Results for “Command and Tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Low Earth Orbiter: Terminal

In response to the current government budgetary environment that requires the National Aeronautics and Space Administration (NASA) to do more with less, NASA/Goddard Space Flight Center's Wallops Flight Facility has developed and implemented a class of ground stations known as a Low Earth Orbiter-Terminal (LEO-T). This development thus provides a low-cost autonomous ground tracking service for NASA's customers. More importantly, this accomplishment provides a commercial source to spacecraft customers around the world to purchase directly from the company awarded the NASA contract to build these systems. A few years ago, NASA was driven to provide more ground station capacity for spacecraft telemetry, tracking, and command (TT&C) services with a decreasing budget. NASA also made a decision to develop many smaller, cheaper satellites rather than a few large spacecraft as done in the past. In addition, university class missions were being driven to provide their own TT&C services due to the increasing load on the NASA ground-tracking network. NASA's solution for this ever increasing load was to use the existing large aperture systems to support those missions requiring that level of performance and to support the remainder of the missions with the autonomous LEO-T systems. The LEO-T antenna system is a smaller, cheaper, and fully autonomous unstaffed system that can operate without the existing NASA support infrastructure. The LEO-T provides a low-cost, reliable space communications service to the expanding number of low-earth orbiting missions around the world. The system is also fostering developments that improve cost-effectiveness of autonomous-class capabilities for NASA and commercial space use. NASA has installed three LEO-T systems. One station is at the University of Puerto Rico, the second system is installed at the Poker Flat Research Range near Fairbanks, Alaska, and the third system is installed at NASA's Wallops Flight Facility in Virginia. This paper will describe the current NASA implementation of the LEO-T network of antenna systems, the customers now being supported, and the services NASA can now offer with this new breed of autonomous ground stations. In addition, the paper will define the technical capabilities of the system and the cost effectiveness of using the systems including the capital costs of installation.

Kremer, Steven E.↗
NASA NTRS1987

A combined stochastic feedforward and feedback control design methodology with application to autoland design

A combined stochastic feedforward and feedback control design methodology was developed. The objective of the feedforward control law is to track the commanded trajectory, whereas the feedback control law tries to maintain the plant state near the desired trajectory in the presence of disturbances and uncertainties about the plant. The feedforward control law design is formulated as a stochastic optimization problem and is embedded into the stochastic output feedback problem where the plant contains unstable and uncontrollable modes. An algorithm to compute the optimal feedforward is developed. In this approach, the use of error integral feedback, dynamic compensation, control rate command structures are an integral part of the methodology. An incremental implementation is recommended. Results on the eigenvalues of the implemented versus designed control laws are presented. The stochastic feedforward/feedback control methodology is used to design a digital automatic landing system for the ATOPS Research Vehicle, a Boeing 737-100 aircraft. The system control modes include localizer and glideslope capture and track, and flare to touchdown. Results of a detailed nonlinear simulation of the digital control laws, actuator systems, and aircraft aerodynamics are presented.

Halyo, Nesim↗
NASA NTRSDate not supplied

Pterodactyl: Guidance and Control of a Symmetric Deployable Entry Vehicle using an Aerodynamic Control System

The NASA-funded Pterodactyl project seeks to advance the state-of-the-art for varying entry vehicle types by developing unconventional guidance and control technologies for Deployable Entry Vehicles (DEVs) that can be applied to different entry vehicle configurations. Prior work by the authors [1–5] involved developing both traditional and novel integrated guidance and control solutions for a Pterodactyl Baseline Vehicle (PBV), a variant of an asymmetric DEV called the Lifting Nano ADEPT (LNA) [6]. In the prior studies, two different guidance schemes were designed and implemented for the PBV: (i) traditional bank angle guidance developed using the Fully Numerical Predictor-Corrector Entry Guidance (FNPEG) and (ii) novel angle of attack and sideslip (α - β) guidance developed using FNPEG with Uncoupled Range Control [4]. Using Linear Quadratic Regulator (LQR) optimal control methods with state-feedback integral control designs, these guidance trajectories were designed to be tracked using (i) a conventional propulsive entry vehicle control hardware architecture - reaction control systems (RCS) and (ii) novel non-propulsive entry vehicle control systems - aerodynamic flap control system (FCS) and moving mass control system (MMCS) [1]. The novel FCS and MMCS architectures were designed to track α - β guidance commands while the RCS was designed to track bank angle commands. It was discovered that the asymmetric DEV, the PBV, experienced a non-zero induced roll moment due to sideslip that the FCS and MMCS architectures had limited capability to trim out. These two architectures were designed to provide independent angle of attack and sideslip commands with limited consideration for roll moment generation to trim. As a result, for the PBV, the FCS and MMCS configurations as designed, were limited in providing the control authority needed to track an α - β guidance trajectory [1]. These results form the motivation for the work presented in this paper - utilizing an aerodynamic control system to track α - β guidance commands for a symmetric DEV with the expectation that a symmetric entry vehicle will have zero or significantly reduced roll moment due to sideslip that the FCS can handle when tracking an α - β guidance trajectory. To demonstrate the feasibility of a novel guidance and control architecture on a DEV, we utilize a symmetric DEV, the PBV-II, for (i) the novel α - β guidance development using FNPEG with Uncoupled Range Control and (ii) LQR control design using eight aerodynamic control surfaces. This paper demonstrates that the novel uncoupled α - β guidance tracking can be achieved using aerodynamic control surfaces on a symmetric deployable entry vehicle configuration.

Wendy A Okolo↗
NASA NTRS2018

Blockchain Application Within a Multi-Sensor Satellite Architecture

With the thrust towards multi-sensor satellite architectures for earth and space exploration, such as constellations and swarms, new technologies are required to enable the transition to this future capability. One of the areas of interest is establishing secure, efficient and prioritized data and command communication pathways among ground and space-based sources for such systems. This paper presents early research results on the potential role, capabilities and value of blockchain usage within constellation and swarm satellite architectures. It demonstrates the use of blockchain's smart contract and distributed ledger capabilities for secure and prioritized multi-sensor satellite collaborative data exchanges, as well as the logging and tracking of command and control events. Adapting and utilizing this emerging technology will aid in addressing technology gaps expected from future constellation flight architectures, such as managing collective computational operations (correlation), dynamic and autonomous observation planning, time-critical events, and provenance tied to ground and space-based autonomous operations and control recordkeeping. In this scenario blockchain is applied in encrypted command transmittal to multiple, yet specific, entities enabling acknowledgement transmittals, performance scalability, and automatic event-based triggering.

Mital, Rohit↗
NASA NTRS1998

Non-Gimbaled Antenna Pointing: Summary of Results and Analysis

There is considerable interest at this time in developing small satellites for quick-turnaround missions to investigate near-earth phenomena from space. One problem to be solved in mission planning is the means of communication between the control infrastructure in the ground segment and the satellite in the space segment. A nominal small-satellite mission design often includes an omni-directional or similar wide-pattern antenna on the satellite and a dedicated ground station for telemetry, tracking, and command support. These terminals typically provide up to 15 minutes of coverage during an orbit that is within the visibility of the ground station; however, not all orbits will pass over the ground station so that coverage gaps will exist in the data flow. To overcome this general limitation on data transmission for low-earth orbiting satellites, the Space Network (SN), operated by the National Aeronautics and Space Administration, (NASA) has been designed to transmit data to and from user satellites through the Tracking and Data Relay Satellites (TDRS) in geostationary orbit and interfacing to the White Sands Complex (WSC) in New Mexico for the data's ground entry point. The advantage of the SN over a fixed ground station is that all low-earth-satellite orbits will be within the visibility area of at least one TDRS within the SN for a large part of the orbit and the potential exists to establish a communications link if the user satellite can point an antenna in the direction of any one of the relay satellites. Within NASA, there is considerable interest in seeing that small satellite developers are aware of the advantages to the SN and that designs to include the SN are part of the satellite design. Small satellite users have not often considered using the SN because of: (1) The 26-dB link penalty differential between direct broadcast to a ground station and transmission through a TDRS to the ground; (2) The class of satellite is too small to support high-gain antennas and associated attitude control and drive electronics; (3) The class of satellites is severely weight and power limited; (4) There are perceived problems in scheduling communications for this class of user on the SN. This report addresses the potential for SN access using non-gimbaled, i.e. fixed-pointed, antennas in the design of the small satellite using modest transmission power to achieve the necessary space-to-ground transmissions. The advantage of using the SN is in the reduction of mission costs arising from using the SN infrastructure instead of a dedicated, proprietary ground station using a similar type of communications package. From the simulations and analysis presented, we will show that a modest satellite configuration can be used with the space network to achieve the data transmission goals of a number of users and thereby rival the performance achieved with proprietary ground stations. In this study, we will concentrate on the return data link (from the user satellite through a TDRS to the ground data entry point). The forward command link (from the ground data entry point through a TDRS to the user satellite) will usually be a lower data rate service and the data volume will also be considerably lower than the return link's requirement. Therefore, we assume that if the return link requirements are satisfied, then the forward link requirements can also be satisfied.

Horan, Stephen↗
NASA NTRS2018

Ground System Development at the Morehead State University for Interplanetary Smallsat Missions

As more small satellites are used for interplanetary research and exploration, more ground antennas with sufficiently large aperture are needed to support the increased demand in deep space communication. The 21-m ground antenna at the Morehead State University in Kentucky, United States is under development to upgrade its telemetry, tracking and command capability at X-band. The system architecture is based on a hybrid design that combines commercially available products with specialized equipment developed for the National Aeronautic and Aerospace Administration’s Deep Space Network. This architecture produces a low-cost and geographically diverse system, connecting elements at the Morehead State University and those of the DSN at the Jet Propulsion Laboratory in Pasadena, California. The architecture makes Morehead antenna appears as one of the DSN nodes, albeit with a different performance metrics due to difference in aperture size. Its operation is geared for automation, with automated data retrieval of information needed for configuring the ground station for spacecraft tracking. An incremental testing approach is used to verify system capabilities as various components are deployed into the system.

Kruth, Jeff↗
NASA NTRS1991

International Solar Terrestrial Physics (ISTP) geotail mission

The Geotail spacecraft will be provided by the Institute of Space and Astronautical Science (ISAS) and will provide a Delta Launch Vehicle, tracking support by the Deep Space Network (DSN), and data processing support by GSFC. In exchange, ISAS will reserve part of the payload for NASA instruments together with a certain number of investigators from the United States. As the solar wind flows toward the Earth, some of the energy is modified by the Earth's magnetosphere, ionosphere, and upper atmosphere. This interaction causes the flow to be altered, creating a plasmasphere, plasma sheet, and ring currents in the Earth's Geomagnetic Tail region. The result is a series of distinct regions which affect processes on the Earth. By traversing the tail region to a variety of depths, Geotail will be able to determine the size, position, and other properties of these regions. When correlated with information obtained from the other ISAS spacecraft, Geotail data should help to provide a more complete understanding of how the solar processes affect the Earth's environment. The flight profile is given, and information is presented in tabular form on the following topics: DSN support, frequency assignments, telemetry, command, and tracking support responsibility.

Sanford, R.↗
NASA NTRS2007

Proposed Array-based Deep Space Network for NASA

The current assets of the Deep Space Network (DSN) of the National Aeronautics and Space Administration (NASA), especially the 70-m antennas, are aging and becoming less reliable. Furthermore, they are expensive to operate and difficult to upgrade for operation at Ka-band (321 GHz). Replacing them with comparable monolithic large antennas would be expensive. On the other hand, implementation of similar high-sensitivity assets can be achieved economically using an array-based architecture, where sensitivity is measured by G/T, the ratio of antenna gain to system temperature. An array-based architecture would also provide flexibility in operations and allow for easy addition of more G/T whenever required. Therefore, an array-based plan of the next-generation DSN for NASA has been proposed. The DSN array would provide more flexible downlink capability compared to the current DSN for robust telemetry, tracking and command services to the space missions of NASA and its international partners in a cost effective way. Instead of using the array as an element of the DSN and relying on the existing concept of operation, we explore a broader departure in establishing a more modern concept of operations to reduce the operations costs. This paper presents the array-based architecture for the next generation DSN. It includes system block diagram, operations philosophy, user's view of operations, operations management, and logistics like maintenance philosophy and anomaly analysis and reporting. To develop the various required technologies and understand the logistics of building the array-based lowcost system, a breadboard array of three antennas has been built. This paper briefly describes the breadboard array system and its performance.

telemetry↗
NASA NTRS2016

NASA Near Earth Network (NEN) and Space Network (SN) Support of CubeSat Communications

There has been a historical trend to increase capability and drive down the Size, Weight and Power (SWAP) of satellites and that trend continues today. NASA scientists and engineers across many of NASAs Mission Directorates and Centers are developing exciting CubeSat concepts and welcome potential partnerships for CubeSat endeavors. From a Telemetry, Tracking and Command (TTC) Systems and Flight Operations for Small Satellites point of view, small satellites including CubeSats are a challenge to coordinate because of existing small spacecraft constraints, such as limited SWAP and attitude control, and the potential for high numbers of operational spacecraft. The NASA Space Communications and Navigation (SCaN) Programs Near Earth Network (NEN) and Space Network (SN) are customer driven organizations that provide comprehensive communications services for space assets including data transport between a missions orbiting satellite and its Mission Operations Center (MOC). This paper presents how well the SCaN networks, SN and NEN, are currently positioned to support the emerging small small satellite and CubeSat market as well as planned enhancements for future support.

Satellite↗
NASA NTRS1965

The Relay spacecraft

Structure, power, communications, telemetry, tracking, and command for Relay I spacecraft

COMMAND SYSTEM↗
NASA NTRS1971

ERTS A and B - The engineering system

ERTS A and B projects, describing satellite communications, data handling, telemetry, tracking and command, thermal control, orbit-adjust, image processing and ground equipment

George, T. A.↗
NASA NTRS1972

Shuttle/Agena study. Annex B: Catalog of existing flight equipment

The Agena space tug design was based on the requirements of representative reference missions, the use of existing hardware, and the experience gained from more than 300 Agena flights. To provide a convenient reference for understanding the Agena tug design selection or for evaluating alternative concepts, this catalog of existing flight equipment was prepared. Equipment descriptions are grouped by Agena subsystem, as follows: spaceframe; propulsion; electrical; guidance and flight controls; and telemetry, tracking, and command. These systems, most of which have been flight qualified on prior Agena programs, permit specialized mission requirements to be satisfied without sacrificing cost or reliability.

Source record↗
NASA NTRS1974

Satellite technology

An exposure to satellite design and fabrication techniques used in unmanned satellite programs is provided. Spacecraft configurations of the earth resources technology satellite (ERTS) and the improved ITOS operational satellite, which are typical of the construction and layout techniques presently in use, are discussed. Support and service subsystems are described taking the ERTS subsystems as representative. The subsystems explained comprise: power, attitude control, orbit adjustment, wideband telemetry, tracking-telemetry-command, auxiliary processing, electrical integration, and spaceborne recording devices. A number of photographs, renditions and diagrams illustrates the text.

Branchflower, G. A.↗
NASA NTRS1976

Tracking and data systems support for the Helios project. Volume 1: Project development through end of mission, phase 2

The overall evolution of the Helios Project is summarized from its conception through to the completion of the Helios-1 mission phase 2. Beginning with the project objectives and concluding with the Helios-1 spacecraft entering its first superior conjunction (end of mission phase 2), descriptions of the project, the mission and its phases, international management and interfaces, and Deep Space Network-spacecraft engineering development in telemetry, tracking, and command systems to ensure compatibility between the U.S. Deep Space Network and the German-built spacecraft are included.

Goodwin, P. S.↗
NASA NTRS1976

Digital adaptive control of a VTOL aircraft

A technique has been developed for calculating feedback and feedforward gain matrices that stabilize a VTOL aircraft while enabling it to track input commands of forward and vertical velocity. Leverrier's algorithm is used in a procedure for determining a set of state variable, feedback gains that force the closed loop poles and zeroes of one pilot input transfer function to be at preselected positions in the s plane. This set of feedback gains is then used to calculate the feedback and feedforward gains for the velocity command controller. The method is computationally attractive since the gains are determined by solving systems of linear, simultaneous equations. Responses obtained using a digital simulation of the longitudinal dynamics of the CH-47 helicopter are presented.

Reid, G. F.↗
NASA NTRS1977

Telemetry and data relay for manned space programs

Previously and currently planned methods of transferring or relaying telemetered information from a remote receiving station to the Mission Control Center, at the National Aeronautics and Space Administration Lyndon B. Johnson Space Center, are discussed. The data flow techniques of the Apollo Program (fixed formats), the Skylab Program (data compression), and the Space Shuttle Program (data throughput) are defined and analyzed according to their advantages and deficiencies from an operations viewpoint. Excluded from the data flow technique discussions are command data, tracking data, television data, and Teletype and Datafax messages. Voice transmissions are addressed in the Space Shuttle Program discussion because they form a part of the telemetry data stream. The tradeoffs between actual data flow requirements and existing communications limitations are addressed for each of these programs. Finally, a short discussion of current problem areas in the planned ground data transmission system for the Space Shuttle Program is presented.

Anson, K. W.↗