Search NASA⌕ Search

SEARCH · Search NASA

Results for “Continuous derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Transport processes in the thermosphere.

Description of two different approaches which have been undertaken to consider horizontal transport in the upper atmosphere by large-scale circulation. First and most direct, the horizontal wind field in the middle and upper thermosphere was calculated based on the pressure distributions derived from satellite orbital decay observations. The continuity conditions were used to calculate the vertical motions. The second approach was to evaluate the energy deficits or surpluses as a function of altitude and latitude and to assume the presence of vertical motions sufficient to balance these deficits or surpluses by compressional heating or cooling. Then continuity conditions were used to derive horizontal winds. The results of the two approaches are compatible, and are largely complementary. Downward velocities are near 1 m/sec at 300 km over the diurnal minimum and the winter polar region, and 1 cm/sec at 100 km over the winter polar region.

Johnson, F. S.↗

Minimal Time Problem with Impulsive Controls

Time optimal control problems for systems with impulsive controls are investigated. Sufficient conditions for the existence of time optimal controls are given. A dynamical programming principle is derived and Lipschitz continuity of an appropriately defined value functional is established. The value functional satisfies a Hamilton–Jacobi–Bellman equation in the viscosity sense. A numerical example for a rider-swing system is presented and it is shown that the reachable set is enlargered by allowing for impulsive controls, when compared to nonimpulsive controls.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of Dynamical Response Functions Using a Bound-State Method

Abstract We investigate a method to extract response functions (dynamical polarisabilities) directly from a bound-state approach applied to calculations of perturbation-induced reactions. The use of a square-integrable basis leads to a response in the form of a sum of $$\delta $$ δ functions. We integrate this over energy and fit a smooth function to the resulting stepwise-continuous one. Its derivative gives the final approximation to the physical response function. We show that the method reproduces analytical results where known, and analyse the details for a variety of models. We apply it to some simple models, using the stochastic variational method as the numerical method. Albeit we find that this approach, and other numerical techniques, have some difficulties with the threshold behavior in coupled-channel problems with multiple thresholds, its stochastic nature allows us to extract robust results even for such cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A stable partitioned FSI algorithm for incompressible flow and deforming beams

An added-mass partitioned (AMP) algorithm is described for solving fluid–structure interaction (FSI) problems coupling incompressible flows with thin elastic structures undergoing finite deformations. The new AMP scheme is fully second-order accurate and stable, without sub-time-step iterations, even for very light structures when added-mass effects are strong. The fluid, governed by the incompressible Navier–Stokes equations, is solved in velocity-pressure form using a fractional-step method; large deformations are treated with a mixed Eulerian-Lagrangian approach on deforming composite grids. The motion of the thin structure is governed by a generalized Euler–Bernoulli beam model, and these equations are solved in a Lagrangian frame using two approaches, one based on finite differences and the other on finite elements. The key AMP interface condition is a generalized Robin (mixed) condition on the fluid pressure. This condition, which is derived at a continuous level, has no adjustable parameters and is applied at the discrete level to couple the partitioned domain solvers. Special treatment of the AMP condition is required to couple the finite-element beam solver with the finite-difference-based fluid solver, and two coupling approaches are described. A normal-mode stability analysis is performed for a linearized model problem involving a beam separating two fluid domains, and it is shown that the AMP scheme is stable independent of the ratio of the mass of the fluid to that of the structure. A traditional partitioned (TP) scheme using a Dirichlet–Neumann coupling for the same model problem is shown to be unconditionally unstable if the added mass of the fluid is too large. A series of benchmark problems of increasing complexity are considered to illustrate the behavior of the AMP algorithm, and to compare the behavior with that of the TP scheme. The results of all these benchmark problems verify the stability and accuracy of the AMP scheme. Results for one benchmark problem modeling blood flow in a deforming artery are also compared with corresponding results available in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Replication-competent human adenovirus 11p vectors can propagate in Vero cells

The use of continuous cell lines derived from the African green monkey kidney (AGMK) has led to major advances in virus vaccine development. However, to date, these cells have not been used to facilitate the creation of human adenoviruses because most human adenoviruses undergo abortive infections in them. Here, we report the susceptibility of AGMK-derived cells to adenovirus 11p (Ad11p) infection. First, we showed that CD46 molecules, which act as receptors for Ad11p, are expressed in AGMK cells. We then monitored Ad11p replication by measuring GFP expression as an indicator of viral transcription. We found that AGMK-derived cells were as capable as carcinoma cells at propagating full-length replication-competent Ad11p (RCAd11p) DNA. Of the AGMK cell lines tested, Vero cells had the greatest capacity for adenovirus production. Thus, AGMK cells can be used to evaluate RCAd11p-mediated gene delivery, and Vero cells can be used for the production of RCAd11pGFP vectors at relatively high yields. - Highlights: • Africa green monkey cell lines were monitored for human adenovirus 11p GFP vector infection. • Human CD46 molecules were detectable in these monkey cell lines. • Adenovirus 11p GFP vector can be propagated in Vero cells increases the safety of Ad11p-based vectors for clinical trials. • To use Vero cells for preparation of Ad11p vector avoids the potential inclusion of oncogenes from tumor cells.

60 APPLIED LIFE SCIENCES↗

Graviton propagator in a general invariant gauge on de Sitter

We construct the graviton propagator on de Sitter background in the one parameter family of exact, de Sitter invariant gauges. Our result takes the form of a universal spin two part and a gauge dependent spin zero part. Scalar equations are derived for the structure functions of each part. There is no de Sitter invariant solution for either structure function, although the de Sitter breaking contribution to the spin zero part may drop out for certain choices of the gauge parameter. Our results imply that de Sitter breaking is universal for the graviton propagator, and hence that there is an error in the contrary results derived by analytic continuation of average gauge fixing techniques.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear birefringence in plasmas: Polarization dynamics, vector modulational instability, and vector solitons

The propagation of an elliptically polarized intense laser pulse in an unmagnetized collisionless uniform plasma is considered. A multiple scale perturbation theory is employed to show that in a weakly relativistic regime, evolution of the components of vector potential is governed by two coherently coupled nonlinear Schrödinger (NLS) equations. A set of equations describing the evolution of Stokes parameters is derived within the continuous wave approximation and the dynamics of components of field amplitude is studied. The polarization dynamics of a pulse is investigated by means of numerical solution of the coupled NLS equations. A detailed analysis of vector modulational instability is presented and the possibility for occurrence of various kinds of vector solitary waves is addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal collapse of a skyrmion

Thermal collapse of an isolated skyrmion on a two-dimensional spin lattice has been investigated. The method is based upon solution of the system of stochastic Landau-Lifshitz equations for up to 10 4 spins. The recently developed pulse-noise algorithm has been used for the stochastic component of the equations. The collapse rate follows the Arrhenius law. Analytical formulas derived within a continuous spin-field model support numerically-obtained values of the energy barrier. The pre-exponential factor is independent of the phenomenological damping constant that implies that the skyrmion is overcoming the energy barrier due to the energy exchange with the rest of the spin system. Our findings agree with experiments, as well as with recent numerical results obtained by other methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The pattern speed of the Milky Way bar from transverse velocities

ABSTRACT We use the continuity equation to derive a method for measuring the pattern speed of the Milky Way’s bar/bulge from proper motion data. The method has minimal assumptions but requires complete coverage of the non-axisymmetric component in two of the three Galactic coordinates. We apply our method to the proper motion data from a combination of Gaia DR2 and VISTA Variables in the Via Lactea (VVV) to measure the pattern speed of the bar as $\Omega _\mathrm{p}=(41\pm 3)\, \mathrm{km\, s^{-1}\, kpc^{-1}}$ (where the error is statistical). This puts the corotation radius at $(5.7\pm 0.4)\, \mathrm{kpc}$, under the assumptions of the standard peculiar motion of the Sun and the absence of non-axisymmetric streaming in the Solar neighbourhood. The obtained result uses only data on the near side of the bar which produces consistent measurements of the distance and velocity of the centre of the Galaxy. Addition of the data on the far side of the bar pulls the pattern speed down to $\Omega _\mathrm{p}=(31\pm 1)\, \mathrm{km\, s^{-1}\, kpc^{-1}}$ but requires a lower transverse velocity for the Galactic centre than observed. This suggests systematics of $5-10\, \mathrm{km\, s^{-1}kpc^{-1}}$ dominate the uncertainty. We demonstrate using a dynamically formed bar/bulge simulation that even with the limited field of view of the VVV survey our method robustly recovers the pattern speed.

Sanders, Jason L.↗

Time Correlations from Steady-State Expectation Values

Recovering properties of correlation functions is typically challenging. On the one hand, experimentally, it requires measurements with a temporal resolution finer than the system’s dynamics. On the other hand, analytical or numerical analysis requires solving the system evolution. Here, we use recent results of quantum metrology with continuous measurements to derive general lower bounds on the relaxation and second-order correlation times that are both easy to calculate and measure. These bounds are based solely on steady-state expectation values and their derivatives with respect to a system parameter, and can be readily extended to the autocorrelation of arbitrary observables. We validate our method on two examples of critical quantum systems: a critical driven-dissipative resonator, where the bound matches analytical results for the dynamics, and the infinite-range Ising model, where only the steady state is solvable, and thus the bound provides information beyond the reach of existing analytical approaches. Our results can be applied to the experimental characterization of ultrafast systems and to the theoretical analysis of many-body models whose dynamics are hard to compute.

Górecki, Wojciech [INFN, Pavia] (ORCID:00000001991↗

Thermodynamics of quantum measurement and Maxwell's demon's arrow of time

Here, we discuss the thermodynamic aspects of a single qubit based device, powered by weak quantum measurements, and feedback controlled by a quantum Maxwell's demon. We discuss both discrete and time-continuous operation of the measurement based device at finite temperature of the reservoir. In the discrete example where a demon acquires information via discrete weak measurements, we find that the thermodynamic variables including the heat exchanged, extractable work, and the entropy produced are completely determined by an information theoretic measure of the demon's perceived arrow of time. We also discuss a realistic time-continuous operation of the device where the feedback is applied after a sequence of weak measurements. In the time-continuous limit, we derive the exact finite-time statistics of work, heat and entropy changes along individual quantum trajectories of the quantum measurement process, and relate them to the demon's arrow of time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anisotropic dynamics of a vicinal surface under the meandering step instability

We investigate the nonlinear evolution of the Bales-Zangwill instability, responsible for the meandering of atomic steps on a growing vicinal surface. We develop an asymptotic method to derive, in the continuous limit, an evolution equation for the two-dimensional step flow. The dynamics of the crystal surface is greatly influenced by the anisotropy inherent to its geometry, and is characterized by the coarsening of undulations along the step direction and by the elastic relaxation in the mean slope direction. We demonstrate, using similarity arguments, that the coalescence of meanders and the step flow follow simple scaling laws, and deduce the exponents of the characteristic length scales and height amplitude. The relevance of these results to experiments is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dark matter catalyzed baryon destruction

WIMP-type dark matter may have additional interactions that break baryon number, leading to induced nucleon decays which are subject to direct experimental constraints from proton decay experiments. In this work, we analyze the possibility of continuous baryon destruction, deriving strong limits from the dark matter accumulating inside old neutron stars, as such a process leads to excess heat generation. We construct the simplest particle dark matter model that breaks the baryon and lepton numbers separately but conserves B - L. Virtual exchange by DM particles in this model results in dinucleon decay via nn → $n\overline{v}$ and np → ne⁺ processes.

79 ASTRONOMY AND ASTROPHYSICS↗

Solving two-dimensional large-N QCD with a nonzero density of baryons and arbitrary quark mass

We solve two-dimensional large-N QCD in the presence of a nonzero baryon number B, and for arbitrary quark mass m and volume L. We fully treat the dynamics of the gluonic zero modes and check how this affects results from previous studies of the B=0 and B=1 systems. For a finite density of baryons, and for any m>0, we find that the ground state contains a baryon crystal with expectation values for <{psi}{gamma}{sub {mu}}{psi}> that have a helixlike spatial structure. We study how these evolve with B and see that the volume integral of <{psi}{psi}> strongly changes with the baryon density. We compare this emerging crystal structure with the sine-Gordon crystal, which is expected to be a good approximation for light quarks, and find that it is a very good approximation for surprisingly heavy quarks. We also calculate the way the ground state energy E changes as a function of the baryon number B, and find that for sufficiently large densities the function E(B) is well described by the equation of state for free massless quarks, thus suggesting a quark-Hadron continuity. From {partial_derivative}E(B)/{partial_derivative}B we calculate the quark chemical potential {mu} as a function of B and see that the baryons repel each other. The way {mu} depends on B also allows us to translate our findings to the grand-canonical ensemble. The resulting phase structure along the {mu} axis contains a phase transition that occurs at a value of {mu} equal to the baryon mass divided in N, and that separates a {mu}-independent phase with intact translation symmetry from a {mu}-dependent phase with spontaneously broken translation symmetry. Finally, our calculations confirm the presence of a partial large-N Eguchi-Kawai volume independence, as described in [Phys. Rev. D 79, 105021 (2009)], that arises only if one treats the gluonic zero modes correctly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charge Conservation beyond Uniformity: Spatially Inhomogeneous Electromagnetic Response in Periodic Solids

Nonlinear electromagnetic response functions have reemerged as a crucial tool for studying quantum materials, due to recently appreciated connections between optical response functions, quantum geometry, and band topology. Most attention has been paid to responses to spatially uniform electric fields, relevant to low-energy optical experiments in conventional solid state materials. However, magnetic and magnetoelectric phenomena are naturally connected by responses to spatially varying electric fields due to Maxwell’s equations. Furthermore, in the emerging field of moiré materials, characteristic lattice scales are much longer, allowing spatial variation of optical electric fields to potentially have a measurable effect in experiments. In order to address these issues, we develop a formalism for computing linear and nonlinear responses to spatially inhomogeneous electromagnetic fields. Starting with the continuity equation, we derive an expression for the second-quantized current operator that is manifestly conserved and model independent. Crucially, our formalism makes no assumptions on the form of the microscopic Hamiltonian and so is applicable to model Hamiltonians derived from tight-binding or calculations. We then develop a diagrammatic Kubo formalism for computing the wave vector dependence of linear and nonlinear conductivities, using Ward identities to fix the value of the diamagnetic current order by order in the vector potential. We apply our formula to compute the magnitude of the Kerr effect at oblique incidence for a model of a moiré-Chern insulator and demonstrate the experimental relevance of spatially inhomogeneous fields in these systems. We further show how our formalism allows us to compute the (orbital) magnetic multipole moments and magnetic susceptibilities in insulators. Turning to nonlinear response, we use our formalism to compute the second-order transverse response to spatially varying transverse electric fields in our moiré-Chern insulator model, with an eye toward the next generation of experiments in these systems. Published by the American Physical Society 2024

Physics↗

Path Integrals for Nonadiabatic Dynamics: Multistate Ring Polymer Molecular Dynamics

This review focuses on a recent class of path-integral-based methods for the simulation of nonadiabatic dynamics in the condensed phase using only classical molecular dynamics trajectories in an extended phase space. Specifically, a semiclassical mapping protocol is used to derive an exact, continuous, Cartesian variable path-integral representation for the canonical partition function of a system in which multiple electronic states are coupled to nuclear degrees of freedom. Building on this exact statistical foundation, multistate ring polymer molecular dynamics methods are developed for the approximate calculation of real-time thermal correlation functions. As a result, the remarkable promise of these multistate ring polymer methods, their successful applications, and their limitations are discussed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixing Cell Model: A One-Dimensional Numerical Model for Assessment of Water Flow and Contaminant Transport in the Unsaturated Zone

This report describes the Mixing Cell Model code, a one-dimensional model for water flow and solute transport in the unsaturated zone under steady-state or transient flow conditions. The model is based on the principles and assumptions underlying mixing cell model formulations. The unsaturated zone is discretized into a series of independent mixing cells. Each cell may have unique hydrologic, lithologic, and sorptive properties. Ordinary differential equations describe the material (water and solute) balance within each cell. Water flow equations are derived from the continuity equation assuming that unit-gradient conditions exist at all times in each cell. Pressure gradients are considered implicitly through model discretization. Unsaturated hydraulic conductivity and moisture contents are determined by the material-specific moisture characteristic curves. Solute transport processes include explicit treatment of advective processes, first-order chain decay, and linear sorption reactions. Dispersion is addressed through implicit and explicit dispersion. Implicit dispersion is an inherent feature of all mixing cell models and originates from the formulation of the problem in terms of mass balance around fully mixed volume elements. Expressions are provided that relate implicit dispersion to the physical dispersion of the system. Two FORTRAN codes were developed to solve the water flow and solute transport equations: (1) the Mixing-Cell Model for Flow (MCMF) solves transient water flow problems and (2) the Mixing Cell Model for Transport (MCMT) solves the solute transport problem. The transient water flow problem is typically solved first by estimating the water flux through each cell in the model domain as a function of time using the MCMF code. These data are stored in either ASCII or binary files that are later read by the solute transport code (MCMT). Code output includes solute pore water concentrations, water and solute inventories in each cell and at each specified output time, and water and solute fluxes through each cell and specified output time. Computer run times for coupled transient water flow and solute transport were typically several seconds on a 2 GHz Intel Pentium IV desktop computer. The model was benchmarked against analytical solutions and finite-element approximations to the partial differential equations (PDE) describing unsaturated flow and transport. Differences between the maximum solute flux estimated by the mixing-cell model and the PDE models were typically less than two percent.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mixing Cell Model: A One-Dimensional Numerical Model for Assessment of Water Flow and Contaminant Transport in the Unsaturated Zone

This report describes the Mixing Cell Model code, a one dimensional model for water flow and solute transport in the unsaturated zone under steady state or transient flow conditions. The model is based on the principles and assumptions underlying mixing-cell model formulations. The unsaturated zone is discretized into a series of independent mixing cells. Each cell may have unique hydrologic, lithologic, and sorptive properties. Ordinary differential equations describe the material (water and solute) balance within each cell. Water-flow equations are derived from the continuity equation, assuming that unit gradient conditions exist at all times in each cell. Pressure gradients are considered implicitly through model discretization. Unsaturated hydraulic conductivity and moisture contents are determined by the material specific moisture-characteristic curves. Solute-transport processes include explicit treatment of advective processes, first order chain decay, and linear sorption reactions. Dispersion is addressed through implicit and explicit dispersion. Implicit dispersion is an inherent feature of all mixing-cell models and originates from the formulation of the problem in terms of mass balance around fully mixed volume elements. Expressions are provided that relate implicit dispersion to the physical dispersion of the system. Two FORTRAN codes were developed to solve the water flow and solute-transport equations: (1) the Mixing Cell Model for Flow (MCMF) solves transient water-flow problems and (2) the Mixing Cell Model for Transport (MCMT) solves the solute-transport problem. The transient water-flow problem is typically solved first by estimating the water flux through each cell in the model domain as a function of time using the MCMF code. These data are stored in either ASCII or binary files that are later read by the solute transport code (MCMT). Code output includes solute pore water concentrations, water and solute inventories in each cell and at each specified output time, and water and solute fluxes through each cell and specified output time. Computer run times for coupled transient water flow and solute transport were typically several seconds on a 2 GHz Intel Pentium IV desktop computer. The model was benchmarked against analytical solutions and finite element approximations to the partial differential equations (PDE) describing unsaturated flow and transport. Differences between the maximum solute flux estimated by the mixing cell model and the PDE models were typically less than two percent. This revision includes an option for a fixed concentration lower boundary condition for diffusive fluxes for versions 020321 and later.

54 ENVIRONMENTAL SCIENCES↗