Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Geochemical solid characterization of drill cuttings, core and drilling mud from Marcellus Shale Energy development

Million tons of drill cuttings generated from shale gas development are currently disposed of in landfills, buried in-situ, or reused as road fill. Cuttings, core samples and operating drilling mud from the Marcellus Shale Energy and Environmental Laboratory in WV were studied to better characterize drill cuttings and to evaluate trace metal mobility in various disposal environments. Results showed that physical and chemical properties of drill cuttings are impacted by the host-rock formation, calcium sources and the residual drilling-mud. Barite in residual drilling mud forms a coating around rock cuttings and influences the mobility of Sr in drill cuttings. Trace metals in drill cuttings are primarily associated with pyrite and total organic carbon (TOC) phases in the shale. As a result, based on sequential extraction results, various trace metal mobilities are controlled by additional solid fractions in drill cuttings, such as pyrite, TOC, calcite, barite and exchangeable clays in the shale.

58 GEOSCIENCES↗

Time-resolved characterization and energy balance analysis of implosion core in shock-ignition experiments at OMEGA

Time-resolved temperature and density conditions in the core of shock-ignition implosions have been determined for the first time. The diagnostic method relies on the observation, with a streaked crystal spectrometer, of the signature of an Ar tracer added to the deuterium gas fill. The data analysis confirms the importance of the shell attenuation effect previously noted on time-integrated spectroscopic measurements of thick-wall targets [R. Florido et al., Phys. Rev. E 83, 066408 (2011)]. This effect must be taken into account in order to obtain reliable results. The extracted temperature and density time-histories are representative of the state of the core during the implosion deceleration and burning phases. As a consequence of the ignitor shock launched by the sharp intensity spike at the end of the laser pulse, observed average core electron temperature and mass density reach T ~ 1100 eV and ρ ~ 2 g/cm 3 ; then temperature drops to T ~ 920 eV while density rises to ρ ~ 3.4 g/cm 3 about the time of peak compression. Compared to 1D hydrodynamic simulations, the experiment shows similar maximum temperatures and smaller densities. Simulations do not reproduce all observations. Differences are noted in the heating dynamics driven by the ignitor shock and the optical depth time-history of the compressed shell. Time-histories of core conditions extracted from spectroscopy show that the implosion can be interpreted as a two-stage polytropic process. Furthermore, an energy balance analysis of implosion core suggests an increase in total energy greater than what 1D hydrodynamic simulations predict. This new methodology can be implemented in other ICF experiments to look into implosion dynamics and help to understand the underlying physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Report - Impact of Microstructure on the Containment and Migration of CO 2 in Fractured Basalts

The overall objective of the project was to advance the scientific and technical understanding of fracture microstructure on the flow and mineralization of CO 2 injected into fractured basalt. The project combined bench-scale CO 2 -water-rock testing, geochemical characterization of rock cores, and advanced characterization of the evolution of fracture structure and carbon trapping mechanisms. A series of natural and artificial basalts were acquired and characterized for use in experiments. High pressure and high temperature experiments were performed in both batch modes and in flow-through systems. The dissolution of silicate minerals in the basalts was tracked, and the timing, identity and location of carbonate minerals that trap that added CO 2 were determined. A reactive transport model was developed that generated simulations that were consistent with the major trends in the experimental data. Novel X-ray computed tomography and nuclear magnetic resonance tools were developed as part of the project. The project found that the formation of carbonate minerals in basalts subjected to injection of CO 2 -rich aqueous solutions can be rapid and extensive. The mineral trapping rate and capacity of porous basalt is much greater than that of sandstone reservoirs. Geochemical gradients that develop upon the exposure of basalt to CO 2 -rich aqueous solutions lead to spatial localization of carbonate minerals in confined environments (e.g., narrow fractures, dead-end fractures, and vesicles). While carbonate minerals form in dead-end fractures, they do not form in ways that inhibit subsequent carbonation of the basalt.

58 GEOSCIENCES↗

Annular Core Research Reactor (ACRR) Pulse Curve Characterization

Reactor pulse characterization at the Annular Core Research Reactor (ACRR) at Sandia Technical Area V (TA-V) is commonly done through photo conductive detection (PCD) and calorimeter detectors. Each of these offer a mode of analyzing a digital signal with different advantages/methods for determination of integrated dose or temporal based metrology. This report outlines a method and code that takes the millions of data points from such detectors and delivers a characteristic pulse trendline through two main methods: digital signal filtration and machine learning, in particular, Support Vector Machines (SVMs). Each method's endpoint is to deliver a characteristic curve for the many bucket environments of ACRR while considering other points of interest including delayed gamma removal for prompt dose metrics. This work draws and adds on previous work detailing the delayed gamma fraction contributions from CINDER simulations of the ACRR. Results from this project show a method to determine characteristic curves in a way that has previously been limited by data set size.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Novel of core-shell AlOOH/Cu nanostructures: Synthesis, characterization, antimicrobial activity and in vitro toxicity in Neuro-2a cells

Core-shell micro/nanostructures were fabricated by the reaction of Al/Cu bimetallic nanoparticles with water. Al/Cu nanoparticles have been obtained using the method of simultaneous electrical explosion of a pair of the corresponding metal wires in an argon atmosphere. The nanoparticles are chemically active and interact with water at 60°C to form core-shell micro/nanostructures. The obtained products were characterized by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy and dynamic light scattering and the nitrogen adsorption method. The antibacterial activity of the synthesized structures was investigated against E. coli and St. aureus. The toxic effect of these nanostructures against the Neuro-2a neuroblastoma cell line was investigated. AlOOH/Cu nanostructures are shown to inhibit cell proliferation. The AlOOH/Cu nanostructures are good candidates for medical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Pt@Cu Core@Shell Dendrimer-Encapsulated Nanoparticles Synthesized by Cu Underpotential Deposition

Dendrimer-encapsulated nanoparticles (DENs) containing averages of 55, 147, and 225 Pt atoms immobilized on glassy carbon electrodes served as the electroactive surface for the underpotential deposition (UPD) of a Cu monolayer. This results in formation of core@shell (Pt@Cu) DENs. Evidence for this conclusion comes from cyclic voltammetry, which shows that the Pt core DENs catalyze the hydrogen evolution reaction before Cu UPD, but that after Cu UPD this reaction is inhibited. Results obtained by in situ electrochemical X-ray absorption spectroscopy (XAS) confirm this finding.

08 HYDROGEN↗

Vibroacoustic Characterization of Corrugated-Core and Honeycomb-Core Sandwich Panels

The vibroacoustic characteristics of two candidate launch vehicle fairing structures, corrugated- core and honeycomb-core sandwich designs, were studied. The study of these structures has been motivated by recent risk reduction efforts focused on mitigating high noise levels within the payload bays of large launch vehicles during launch. The corrugated-core sandwich concept is of particular interest as a dual purpose structure due to its ability to harbor resonant noise control systems without appreciably adding mass or taking up additional volume. Specifically, modal information, wavelength dispersion, and damping were determined from a series of vibrometer measurements and subsequent analysis procedures carried out on two test panels. Numerical and analytical modeling techniques were also used to assess assumed material properties and to further illuminate underlying structural dynamic aspects. Results from the tests and analyses described herein may serve as a reference for additional vibroacoustic studies involving these or similar structures.

Allen, Albert↗

Characterization and Modeling of Amorphous Metallic Cores

Los Alamos is planning a new compact multi-pulsed electron linear induction accelerator (LIA) for flash radiography of explosively driven hydrodynamic experiments, the Advanced Radiography Induction Accelerator (ARIA). In order to operate in multi-pulse mode without the need to reset the inductor cores between each pulse, the design incorporates amorphous metallic glass cores. Due to their high magnetic saturation value, these provide enough volt-seconds for sequential pulsing before reaching saturation. Although metallic glass cores are used extensively, their behavior depends greatly on the particular formulation and on the specific application. For this reason, we have undertaken an effort to better characterize the cores under consideration and use this data to develop models that can be used in EM simulations. We present the characterization of two types of cores being consid- ered: Metglas 2605CO and 2605HB1M cores. We include detailed measurements of BH curves at various magneti- zation rates, measurements of multiple pulses on the same core, and initial modeling efforts.

43 PARTICLE ACCELERATORS↗

Geomagnetism of earth's core

Instrumentation, analytical methods, and research goals for understanding the behavior and source of geophysical magnetism are reviewed. Magsat, launched in 1979, collected global magnetometer data and identified the main terrestrial magnetic fields. The data has been treated by representing the curl-free field in terms of a scalar potential which is decomposed into a truncated series of spherical harmonics. Solutions to the Laplace equation then extend the field upward or downward from the measurement level through intervening spaces with no source. Further research is necessary on the interaction between harmonics of various spatial scales. Attempts are also being made to analytically model the main field and its secular variation at the core-mantle boundary. Work is also being done on characterizing the core structure, composition, thermodynamics, energetics, and formation, as well as designing a new Magsat or a tethered satellite to be flown on the Shuttle.

Benton, E. R.↗

Low loss, high and low index contrast waveguides in semiconductors

A system in one general embodiment includes a waveguide structure comprising a core of an alloy of Group III-V materials surrounded by an oxide (which may include one or more Group III-V metals), wherein an interface of the oxide and core is characterized by oxidation of the alloy for defining the core. A method in one general approach includes oxidizing a waveguide structure comprising an alloy of Group III-V materials for forming a core of the alloy surrounded by an oxide.

36 MATERIALS SCIENCE↗