Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cycle Performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Highly Efficient Organosulfur and Lithium-Metal Hosts Enabled by C@Fe 3 N Sponge

Lithium-organosulfur (Li-OS) batteries, despite possessing high theoretical specific capacity, encounter a few practical challenges, including unsatisfactory lifespan and low active material utilization under realistic conditions. Here, diisoropyl xanthogen polysulfide (DIXPS) has been selected as a model organosulfur compound to investigate the practical feasibility of Li-OS batteries under realistic conditions. A well-designed freestanding carbon sponge decorated with Fe 3 N nanoparticles (C@Fe 3 N) is introduced into the Li-OS cells as a scaffold for both Li and DIXPS. The lithiophilic property of the C@Fe 3 N host guides uniform lithium deposition at the anode, and the catalysis of the DIXPS conversion reaction promotes the kinetics at the cathode. Impressively, the synergistic effect of C@Fe 3 N leads to an extremely stable cycling performance over 1000 cycles in a Li-OS full cell under realistic conditions.

25 ENERGY STORAGE↗

Electrodeposited Zinc-based Films as Anodes for Aqueous Zinc Batteries

Zinc-based batteries have attracted extensive attention in recent years, due to high safety, high capacities, environmental friendliness, and low cost compared to lithium ion batteries. However, the zinc anode suffers primarily from dendrite formation as a mode of failure in the mildly acidic system. Herein, we report on electrochemically deposited zinc (ED Zn) and copper-zinc (brass) alloy anodes, which are critically compared with a standard commercial zinc foil. The film electrodes are of commercially relevant thicknesses (21 and 25µM). The electrodeposited zinc-based anodes exhibit low electrode polarization (~0.025V) and stable cycling performance in 50 cycle consecutive experiments from 0.26-10 mA cm-2 compared to commercial Zn foil. Coulombic efficiencies at 1 mA cm-2 were over 98% for the electrodeposited zinc-based materials and were maintained for over 100 cycles. Furthermore, full cells with an electrodeposited Zn/brass anode, EMD MnO2 cathode, in 1M ZnSO4 + 0.1M MnSO4 delivered capacities of 96.3, and 163 mAh g-1, respectively, at a 100 mA g-1 compared to 92.1 mAh g-1 for commercial Zn. The zinc-based anodes also show better rate capability, delivering full cell capacities of 35.9 and 47.5 mAh g-1 at high current of up to 3 A g-1. Lastly, the electrodeposited zinc-based anodes show enhanced capacity for up to 100 cycles at 100 mA g-1, making them viable anodes for commercial use.

Fayette, Matthew R.↗

Cyclic performance tests of Sn/MWCNT composite lithium ion battery anodes at different temperatures

In this study tin-multi walled carbon nanotube (Sn-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 °C, 35 °C, 50 °C) temperatures to determine the cyclic behaviors of anode at different temperatures. Anodes were produced via vacuum filtration and DC magnetron sputtering technique. Tin was sputtered onto buckypapers to form composite structure of anodes. SEM analysis was conducted to determine morphology of buckypapers and Sn-MWCNT composite anodes. Structural and phase analyses were conducted via X-ray diffraction and Raman Spectroscopy technique. CR2016 coin cells were assembled for electrochemical tests. Cyclic voltammetry test were carried out to determine the reversibility of reactions between anodes and reference electrode between 0.01-2.0 V potential window. Galvanostatic charge/discharge tests were performed to determine cycle performance of anodes at different temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene coating on silicon anodes enabled by thermal surface modification for high-energy lithium-ion batteries

Silicon is a high-energy density anode material for lithium-ion batteries, but it possesses shortcomings such as poor electronic conductivity, interfacial instability and mechanical fracturing that hinder its battery cycling. Carbon coating has been an important strategy for stabilizing silicon anodes, but the effects of the silicon surface properties on carbon coating morphology and the consequent silicon cycling stability have not been clearly elucidated. Herein, we find that thermal oxidation of the silicon anodes followed by chemical vapor deposition of carbonaceous precursors leads to a well-ordered graphene coating, whereas disordered graphite coating is formed on the native silicon surface. Graphene-coated silicon exhibits superior cycling performance, retaining a discharge capacity of ~1300 mAh g -1 after 300 cycles, whereas the disordered graphite-coated silicon suffers continuous degradation, retaining only~600 mAh g -1 after 300 cycles. Cryogenic electron microscopy reveals the mechanism behind the difference in cycling stabilities; graphene coated silicon is able to withstand the large mechanical strains induced during extended cycling, whereas disordered graphite coating is ruptured, exposing silicon surfaces to the electrolyte, leading to extensive buildup of SEI and poor cycling performance. Characterization of the silicon surface reveals that thermal treatment yields an oxygen-rich surface layer, which is hypothesized to play a decisive role in dictating the carbon coating. This work highlights the effect of silicon surface properties on carbon coating microstructure, and presents thermal treatment as a facile avenue to attain graphene coating on silicon anodes.

25 ENERGY STORAGE↗

Nuclear Fuel Cycle Options Evaluation to Inform R&D Planning

An Evaluation and Screening (E&S) of nuclear fuel cycle options has been conducted in fulfilment of a Charter specified for the study by the U.S. Department of Energy (DOE) Office of Nuclear Energy. The E&S study used an objective and independently reviewed evaluation process to provide information about the potential benefits and challenges that could strengthen the basis and provide guidance for the research and development(R&D) activities undertaken by the DOE Fuel Cycle Technologies Program Office. Using the nine evaluation criteria specified in the Charter and associated evaluation metrics and processes developed during the E&S study, a screening was conducted of 40 nuclear fuel cycle evaluation groups to provide answers to the questions: (1) Which nuclear fuel cycle system options have the potential for substantial beneficial improvements in nuclear fuel cycle performance, and what aspects of the options make these improvements possible? (2)Which nuclear material management approaches can favorably impact the performance of fuel cycle options? (3)Where would R&D investment be needed to support the set of promising fuel cycle system options and nuclear material management approaches identified above, and what are the technical objectives of associated technologies?

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗

Effectively suppressing dissolution of manganese from spinel lithium manganate via a nanoscale surface-doping approach

The capacity fade of lithium manganate-based cells is associated with the dissolution of Mn from cathode/electrolyte interface due to the disproportionation reaction of Mn( III), and the subsequent deposition of Mn(II) on the anode. Suppressing the dissolution of Mn from the cathode is critical to reducing capacity fade of LiMn2O4-based cells. Here we report a nanoscale surface-doping approach that minimizes Mn dissolution from lithium manganate. This approach exploits advantages of both bulk doping and surface-coating methods by stabilizing surface crystal structure of lithium manganate through cationic doping while maintaining bulk lithium manganate structure, and protecting bulk lithium manganate from electrolyte corrosion while maintaining ion and charge transport channels on the surface through the electrochemically active doping layer. Consequently, the surface-doped lithium manganate demonstrates enhanced electrochemical performance. This study provides encouraging evidence that surface doping could be a promising alternative to improve the cycling performance of lithium-ion batteries.

Lithium ion battery↗

Polycation ionic liquid tailored PEO-based solid polymer electrolytes for high temperature lithium metal batteries

Poly(ethylene oxide) (PEO)-based polymer electrolytes are promising candidates for solid-state electrolytes in safer, next generation lithium metal batteries. Despite their benefits however, PEO-based electrolyte exhibits highly crystalline ethylene oxide chains that provide poor ionic conductivity and, thus severely limit its practical application. Here, we report the use of hydroxypropyl trimethylammonium bis(trifluoromethane) sulfonimide chitosan salt (HACC-TFSI), which is an amorphous poly(ionic liquid) based biomass chitosan derivative, as a modifier for PEO-based solid polymer electrolytes (SPEs) to address these deficiencies. Hybrid SPEs with HACC-TFSI display enlarged amorphous regions with enhanced ionic conductivity. Interactions between quaternary ammonium cations and TFSI-anions in hybrid SPEs are also found to promote dissociation between Li + and TFSI - , which further increases ionic mobility. Moreover, the electrochemical stability, mechanical strength, and thermal stability of hybrid SPEs are collectively superior to blank SPEs without HACC-TFSI. LiFePO 4 /SPEs/Li full-cells assembled using 10wt% HACC-TFSI in PEO (10%HACC-TFSI/SPEs) electrolyte provide a capacity of 161.3 mAh g -1 and operate with excellent cycle performances at 0.2 C and 60 C. Finally, even when the temperature is increased to 150 C, LiFePO 4 /SPEs/Li cells with 10%HACC-TFSI/SPEs still display remarkable cycle performance with 73% capacity retention after 100 cycles at 1 C rate.

25 ENERGY STORAGE↗

A POM–organic framework anode for Li-ion battery

Rechargeable Li-ion batteries (LIBs) are currently the dominant power source for portable electronic devices and electric vehicles, and for small-scale stationary energy storage. However, one bottleneck of the anode materials for LIBs is the poor cycling performance caused by the fact that the anodes cannot maintain their integrity over several charge–discharge cycles. In this work, we demonstrate an approach to improving the cycling performance of lithium-ion battery anodes by constructing an extended 3D network of flexible redox active polyoxometalate (POM) clusters with redox active organic linkers, herein described as POMOF. In addition, this architecture enables the accommodation of large volume changes during cycling at relatively high current rates. For example, the POMOF anode exhibits a high reversible capacity of 540 mA h g –1 after 360 cycles at a current rate of 0.25C and a long cycle life at a current rate of 1.25C (>500 cycles).

25 ENERGY STORAGE↗

Unravelling the impact of reaction paths on mechanical degradation of intercalation cathodes for lithium-ion batteries

The intercalation compounds are generally considered as ideal electrode materials for lithium-ion batteries thanks to their minimum volume expansion and fast lithium ion diffusion. However, cracking still occurs in those compounds and has been identified as one of the critical issues responsible for their capacity decay and short cycle life, although the diffusion-induced stress and volume expansion are much smaller than those in alloying-type electrodes. Here, we designed a thin-film model system that enables us to tailor the cation ordering in LiNi 0.5 Mn 1.5 O 4 spinels and correlate the stress patterns, phase evolution, and cycle performances. Surprisingly, we found that distinct reaction paths cause negligible difference in the overall stress patterns but significantly different cracking behaviors and cycling performances: 95% capacity retention for disordered LiNi 0.5 Mn 1.5 O 4 and 48% capacity retention for ordered LiNi 0.5 Mn 1.5 O 4 after 2000 cycles. We were able to pinpoint that the extended solid-solution region with suppressed phase transformation attributed to the superior electrochemical performance of disordered spinel. Furthermore, this work envisions a strategy for rationally designing stable cathodes for lithium-ion batteries through engineering the atomic structure that extends the solid-solution region and suppresses phase transformation.

25 ENERGY STORAGE↗

One-step synthesis of dense and spherical nanostructured V{sub 2}O{sub 5} particles for cathode of lithium batteries and their electrochemical properties

Graphical abstract: Dense and spherical nanostructured V{sub 2}O{sub 5} particles. - Highlights: • One-step synthesis of dense, spherical, nanostructured V{sub 2}O{sub 5} particles was achieved. • As-prepared V{sub 2}O{sub 5} consists of primary particles of approximately 100 nm size. • The electrochemical performance of spherical nanostructured V{sub 2}O{sub 5} was investigated. • The potential range affects to the discharge capacity and cyclability of V{sub 2}O{sub 5}. - Abstract: A one-step synthesis of V{sub 2}O{sub 5} was directly achieved via ultrasonic spray pyrolysis at various synthesis temperatures ranging from 500 to 700 °C. The V{sub 2}O{sub 5} prepared at 500 °C is dense and spherical nanostructured particles, which consist of primary particles with a size of approximately 100 nm. The morphology change remarkably progresses with increasing synthesis temperatures from 500 to 700 °C. The electrochemical performance of a cathode comprising dense and spherical nanostructured V{sub 2}O{sub 5} particles prepared at 500 °C was investigated by galvanostatic discharge–charge cycling and cyclic voltammetry. From the discharge–charge cycling, the initial discharge capacity of the cathode was found to be about 403 mAh g{sup −1} in the potential range of 1.5–4.0 V, but it decreased owing to inherent phase changes with repeated cycling. The potential range significantly affects the cycle performance, and the V{sub 2}O{sub 5} cathode showed good cycle performance in the potential range of 2.5–4.0 V.

36 MATERIALS SCIENCE↗

ALD of Al2O3 for Highly Improved Performance in Li-Ion Batteries

Significant advances in energy density, rate capability and safety will be required for the implementation of Li-ion batteries in next generation electric vehicles. We have demonstrated atomic layer deposition (ALD) as a promising method to enable superior cycling performance for a vast variety of battery electrodes. The electrodes range from already demonstrated commercial technologies (cycled under extreme conditions) to new materials that could eventually lead to batteries with higher energy densities. For example, an Al2O3 ALD coating with a thickness of ~ 8 A was able to stabilize the cycling of unexplored MoO3 nanoparticle anodes with a high volume expansion. The ALD coating enabled stable cycling at C/2 with a capacity of ~ 900 mAh/g. Furthermore, rate capability studies showed the ALD-coated electrode maintained a capacity of 600 mAh/g at 5C. For uncoated electrodes it was only possible to observe stable cycling at C/10. Also, we recently reported that a thin ALD Al2O3 coating with a thickness of ~5 A can enable natural graphite (NG) electrodes to exhibit remarkably durable cycling at 50 degrees C. The ALD-coated NG electrodes displayed a 98% capacity retention after 200 charge-discharge cycles. In contrast, bare NG showed a rapid decay. Additionally, Al2O3 ALD films with a thickness of 2 to 4 A have been shown to allow LiCoO2 to exhibit 89% capacity retention after 120 charge-discharge cycles performed up to 4.5 V vs Li/Li+. Bare LiCoO2 rapidly deteriorated in the first few cycles. The capacity fade is likely caused by oxidative decomposition of the electrolyte at higher potentials or perhaps cobalt dissolution. Interestingly, we have recently fabricated full cells of NG and LiCoO2 where we coated both electrodes, one or the other electrode as well as neither electrode. In creating these full cells, we observed some surprising results that lead us to obtain a greater understanding of the ALD coatings. We have also recently coated a binder free LiNi0.04Mn0.04Co02O2 electrode containing 5 wt% single-walled carbon nanotubes as the conductive additive and demonstrated both high rate capability as well as the ability to cycle the cathode to 5 V vrs. Li/Li+. Finally, we coated a Celgard (TM) separator and enabled stable cycling in a high dielectric electrolyte. These results will be presented in detail.

25 ENERGY STORAGE↗

Amorphous MoS 3 Infiltrated with Carbon Nanotubes as an Advanced Anode Material of Sodium-Ion Batteries with Large Gravimetric, Areal, and Volumetric Capacities

The search for earth-abundant and high-performance electrode materials for sodium-ion batteries represents an important challenge to current battery research. 2D transition metal dichalcogenides, particularly MoS2, have attracted increasing attention recently, but few of them so far have been able to meet expectations. In this study, it is demonstrated that another phase of molybdenum sulfide—amorphous chain-like MoS3—can be a better choice as the anode material of sodium-ion batteries. Highly compact MoS3 particles infiltrated with carbon nanotubes are prepared via the facile acid precipitation method in ethylene glycol. Compared to crystalline MoS2, the resultant amorphous MoS3 not only exhibits impressive gravimetric performance—featuring excellent specific capacity (≈615 mA h g-1), rate capability (235 mA h g-1 at 20 A g-1), and cycling stability but also shows exceptional volumetric capacity of ≈1000 mA h cm-3 and an areal capacity of >6.0 mA h cm-2 at very high areal loadings of active materials (up to 12 mg cm-2). The experimental results are supported by density functional theory simulations showing that the 1D chains of MoS3 can facilitate the adsorption and diffusion of Na+ ions. At last, it is demonstrated that the MoS3 anode can be paired with an Na3V2(PO4)3 cathode to afford full cells with great capacity and cycling performance.

Ye, Hualin↗

Selenium Nanocomposite Cathode with Long Cycle Life for Rechargeable Lithium‐Selenium Batteries

Abstract Selenium (Se) is a potential cathode material for high energy density rechargeable lithium batteries. In this study, a binder‐free Se‐carbon nanotube (CNT) composite electrode has been prepared by a facile chemical method. At initial state, Se is present in the form of branched nanowires with a diameter of <150 nm and a length of 1–2 μm, interwoven with CNTs. After discharge and re‐charge, the Se nanowires are converted to nanoparticles embedded in the CNT network. This synthesis method provides a path for fabricating the Se cathodes with controllable mass loading and thickness. By studying the composite electrodes with different Se loading and thickness, we found that the electrode thickness has a critical impact on the distribution of Se during repeated cycling. Promising cycling performance was achieved in thin electrodes with high Se loading. The composite electrode with 23 μm thickness and 60 % Se loading shows a high initial capacity of 537 mAh g −1 and stable cycling performance with a capacity of 401 mAh g −1 after 500 cycles at 1 C rate. This study reports a synthesis strategy to obtain Se/CNT composite cathode with long cycle life for rechargeable Li−Se batteries.

Cui, Yi↗

TEMPO allegro: liquid catholyte redoxmers for nonaqueous redox flow batteries

Redoxmers are organic active molecules storing energy in redox flow batteries (RFBs). Liquid redoxmers represent an extreme scenario where maximum concentration may be achieved by minimizing supporting solvents, thus maximizing the energy density of RFBs. Herein, a series of (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO)-based high potential (catholyte) liquid redoxmers, TEMPO-EG1, TEMPO-EG2, and TEMPO-EG3, were developed by incorporating polyethylene glycol (PEG) chains. Such modifications not only afford dramatic physical changes from solid to liquid and full miscibility in acetonitrile, but also impact the redox behavior. DFT calculations indicate that the incorporated PEG chains impact the charge distribution, which may account for the electrochemical changes. Importantly, compared to our previous liquid catholytes, the new redoxmers exhibit lower viscosity, which is desired for enhancing high concentration cycling performance. Furthermore, by using a hybrid flow cell, TEMPO-EG1 demonstrated more than 70% capacity retention over 100 cycles at 0.1 M and 66% capacity retention at 0.5 M, affording excellent cyclability at various concentrations. The study exemplifies how molecular engineering tuned the rheological properties of redoxmers, such as viscosity, to improve the high concentration cycling performance of RFBs, which may represent a promising avenue for a high energy density and low-cost flow battery system.

25 ENERGY STORAGE↗

Synthesis of Ti-based electrodes using Ti-salt flocculated sludge and their application in lithium-ion batteries

We report a simple strategy to synthesize the nanostructured TiO{sub 2} samples by a solid state reaction using Ti-salt flocculated sludge. The structure and morphology of the Ti-salt flocculated sludge, nanostructured TiO{sub 2} samples and pure commercial Aldrich TiO{sub 2} powder were characterized by powder X-ray diffraction and field emission scanning electron microscopy (FE-SEM). The electrochemical performances were evaluated in coin type cells. Nanostructured TiO{sub 2} samples, obtained by Ti-salt flocculated sludge shows a higher capacity and better cycling performances than pure commercial Aldrich TiO{sub 2} powder at the cutoff of 1.0–2.5 V especially at high current rate. The enhanced cycling performance can be attributed to the facts that their high crystallinity and uniform nano-sized distribution.

36 MATERIALS SCIENCE↗