Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIFFUSION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Electro-carburization of mild steel through two-step reaction in molten-salt electrolyte

The rapid carburization of mild steel is demonstrated via the electrochemical deposition of solid carbon, followed by thermochemical iron-carbon (Fe-C) reaction using a molten lithium-potassium carbonate (LiKCO 3 ) salt electrolyte and carbon dioxide as the carbon source. Depth-dependent microstructural and compositional changes in the steel are shown to be controlled by the applied cell voltage and reaction temperatures. Reaction temperatures above the Fe-C eutectoid temperature promote faster carburization due to carbon dissolution into austenite. The carbon deposition rate is regulated by the applied cell voltage: At - 2.4 V, carbon deposition occurs much faster than its diffusion into the steel, resulting in the accumulation of a carbon-rich layer exceeding 1 mm, which does not diffuse into the steel. In contrast, at - 1.8 V, all deposited carbon effectively diffuses into the steel, leaving a minimal external deposit. In both cases, carbon ingress forms a carbide-rich surface layer and precipitates additional carbides along the grain boundaries within the steel electrode. This method offers a potential approach to increase the carbon content of mild or low-carbon steel feedstocks, such as scrap or direct reduced iron, for industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Perspective on “Active Brownian particles moving in a random Lorentz gas”

Self-propelled active matter can exhibit vastly different behavior than systems with purely Brownian motion. In Eur. Phys. J. E 40, 23 (2017), Zeitz, Wolf, and Stark compared an active matter particle with a Brownian particle moving in a random obstacle array. They showed that near the obstacle percolation density, both Brownian and active particles exhibit the same subdiffusive behavior, but the active particle reaches a steady state more rapidly. They also found that for high activity, the active particle has a lower effective diffusion than the Brownian particle due to the increased self-trapping effect generated by the activity. This result opens new directions for the study of active matter in disordered media, including bacteria in porous media, active colloids on quenched disorder, and active particles in crowded environments.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Study and modeling of finite rate chemistry effects in turbulent non-premixed flames

The development of numerical models that reflect some of the most important features of turbulent reacting flows requires information about the behavior of key quantities in well defined combustion regimes. In turbulent flames, the coupling between turbulent and chemical processes is so strong that it is extremely difficult to isolate the role played by one individual physical phenomenon. Direct numerical simulation (hereafter DNS) allows us to study in detail the turbulence-chemistry interaction in some restricted but completely defined situations. Globally, non-premixed flames are controlled by two limiting regimes: the fast chemistry case, where the turbulent flame can be pictured as a random distribution of local chemical equilibrium problems; and the slow chemistry case, where the chemistry integrates in time the turbulent fluctuations. The Damkoehler number, ratio of a mechanical time scale to chemical time scale, is used to distinguish between these regimes. Today most of the industrial computer codes are able to perform predictions in the hypothesis of local equilibrium chemistry using a presumed shape for the probability density function (pdt) of the conserved scalar. However, the finite rate chemistry situation is of great interest because industrial burners usually generate regimes in which, at some points, the flame is undergoing local extinction or at least non-equilibrium situations. Moreover, this variety of situations strongly influences the production of pollutants. To quantify finite rate chemistry effect, the interaction between a non-premixed flame and a free decaying turbulence is studied using DNS. The attention is focused on the dynamic of extinction, and an attempt is made to quantify the effect of the reaction on the small scale mixing process. The unequal diffusivity effect is also addressed. Finally, a simple turbulent combustion model based on the DNS observations and tractable in real flow configurations is proposed.

Vervisch, Luc↗
NASA NTRS1972

Diffusive and radiative effects on vaporization times of drops in film boiling

Diffusive and radiative effects are incorporated into an analysis for the vaporization time of drops in film boiling. The momentum, energy, and continuity equations are solved with some appropriate simplifications so as to obtain a simple closed form solution for the overall film boiling heat transfer coefficient. Next, a theoretical expression for the droplet vaporization time is developed and compared to the measured vaporization times of water droplets vaporizing into air, argon, nitrogen, and helium. The agreement between experiment and theory is good. Under the helium blanket, the diffusive evaporative component is significant in comparison to the film boiling component.

Baumeister, K. J.↗
NASA NTRS1977

Observations of neutral composition and related ionospheric variations during a magnetic storm in February 1974

The neutral-atmosphere composition experiment on Atmosphere Explorer C measured N2, O, Ar, and He densities during a magnetic storm at altitudes down to about 160 km. At latitudes above 45 deg N, N2 and Ar densities generally increase during the storm, while He and O densities decrease. Below 45 deg N all densities tend to increase during the storm. The density increases at perigee indicate that density- or temperature-profile changes are taking place below 160 km. The return to prestorm conditions is very slow, demonstrating the integrating effect of the atmospheric response. A recent theoretical model incorporating thermospheric circulation and diffusion effects reproduces the longitudinally averaged data, including latitude trends and the asymmetry about the storm maximum. Comparison with the mass-spectrometer and incoherent-scatter empirical model shows qualitative agreement with latitude trends but not with storm asymmetry, while the earlier J71 model based on total mass density is not in agreement with observed latitudinal trends. A close correlation is found between in situ O/N2 measurements and in situ and ground-based ionosonde measurements of electron density.

Hedin, A. E.↗
NASA NTRS1981

Assessment of high temperature metallizations for I(2)L and CMOS technologies

High temperature barrier metallizations were assessed and tested for I(2)L and CMOS applications. Life tests were accelerated to 375 C in view of the -55 C to +300 C temperature range established for engine-located electronics without fuel cooling. The gold-refractory metallizations evaluated were Au-TiW-PtSi, Au-TiW/TiO2/TiW-PtSi and Au-TiW(N)-PtSi. These metallization systems were thermally annealed to at least 375 C for up to 250 hours. The critical requirement for stable diffusion barrier is the TiW grain size. Small grain (250A-500A) films were observed to be stable up to 375 C. Deposition to TiW diffusion barrier in the presence of oxygen and nitrogen also results in an effective diffusion barrier. Auger electron spectroscopy profiles of the PtSi indicates some penetration by the TiW. In the case of PtSi/TiW interface, the redistribution of oxygen further passivates the system by forming a TiO2 layer at the interface.

Christou, A.↗
NASA NTRS1977

Surface recombination velocity and diffusion length of minority carriers in heavily doped silicon layers

Quantitative analysis of the electron beam-induced current and the dependence of the effective diffusion length of the minority carriers on the penetration depth of the electron beam were employed for the analysis of the carrier recombination characteristics in heavily doped silicon layers. The analysis is based on the concept of the effective excitation strength of the carriers which takes into consideration all possible recombination sources. Two dimensional mapping of the surface recombination velocity of P-diffused Si layers will be presented together with a three dimensional mapping of minority carrier lifetime in ion implanted Si. Layers heavily doped with As exhibit improved recombination characteristics as compared to those of the layers doped with P.

Gatos, H. C.↗
NASA NTRS1978

The effect of nonlinear diffusive heat transport in a simple climate model

The effects of nonlinear diffusive heat transport in North's (1975) model is reexamined. By inserting the nonlinearity into the original energy balance equation rather than the spectrally transformed linear algebraic equations, and including one more mode in the spectral expansion, it is found that nonlinear diffusion does give a significantly different sensitivity for states near the current climate. For linear diffusion, an increase of 0.1% of the solar constant from the present value is sufficient to melt all the ice on the earth, whereas an increase of about five times as large is required for nonlinear diffusion. This difference in sensitivity shows the importance of dynamical modeling in simple climate models.

Lin, C. A.↗
DOE OSTI2025

Modeling of convective cells, turbulence, and transport induced by a radio-frequency antenna in the tokamak boundary plasma

The edge turbulence model Hermes (Dudson et al 2017 Plasma Phys. Control. Fusion 59 05401) is set up for plasma boundary simulations with an radiofrequency (RF) antenna, using parameters characteristic of a tokamak edge. Cartesian slab geometry is used with thin plate limiters representing the ion cyclotron range of frequency (ICRF) antenna side-wall limiters. Ad-hoc DC electric biasing of the limiters, motivated by calculations with VSim (Nieter et al 2004 J. Comput. Phys. 196 448), represents an induced RF sheath rectified potential in the plasma turbulence model. Flux-driven turbulence simulations demonstrate a realistic distribution of plasma profiles and fluctuations. There is a clear effect of the antenna sheath voltage leading to formation of convective cells; bias-induced convective transport flattens the scrape-off layer density profile and fluctuations penetrate into the shadow region of the limiters as the bias voltage increases. Turbulent transport for impurity ions is inferred by following ion trajectories in the simulated plasma turbulence fields, showing Bohm-like effective diffusion rates. All in all, the model elucidates the key physical phenomena governing the effects of ICRF-induced antenna biasing on the tokamak boundary plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2010

Mechanisms of Ionospheric Mass Ejection

Ionospheric outflows are directly responsive to solar wind disturbances, particularly in the dayside auroral cusp or cleft regions. Inputs of both electromagnetic energy (Poynting flux) and kinetic energy (particle precipitation) are closely correlated with these outflows. We assess the importance of processes thought to drive ionospheric outflows. These begin with the diffuse effects of photoionization and thermal equilibrium of the ionospheric topside, enhancing Jeans' escape, with ambipolar diffusion and acceleration. Auroral outflows begin with dayside reconnexion and resultant field-aligned currents and driven convection. These produce plasmaspheric plumes, collisional heating and wave-particle interactions, centrifugal acceleration, and auroral acceleration by parallel electric fields, including enhanced ambipolar fields from electron heating by precipitation particles. Solar wind energy dissipation is concentrated by the geomagnetic field into auroral regions with an amplification factor of 10-100, enhancing heavy species plasma and gas escape from gravity, and providing more current carrying capacity. Internal plasmas thus enable electromagnetic driving via coupling to the plasma and neutral gas. We assess the importance of each of these processes in terms of local escape flux production as well as global outflow, and suggest methods for their implementation within multi-species global simulation codes. We conclude by assessing outstanding obstacles to this objective.

Moore, Thomas Earle↗
NASA NTRS2009

Physical Processes for Driving Ionospheric Outflows in Global Simulations

We review and assess the importance of processes thought to drive ionospheric outflows, linking them as appropriate to the solar wind and interplanetary magnetic field, and to the spatial and temporal distribution of their magnetospheric internal responses. These begin with the diffuse effects of photoionization and thermal equilibrium of the ionospheric topside, enhancing Jeans' escape, with ambipolar diffusion and acceleration. Auroral outflows begin with dayside reconnexion and resultant field-aligned currents and driven convection. These produce plasmaspheric plumes, collisional heating and wave-particle interactions, centrifugal acceleration, and auroral acceleration by parallel electric fields, including enhanced ambipolar fields from electron heating by precipitating particles. Observations and simulations show that solar wind energy dissipation into the atmosphere is concentrated by the geomagnetic field into auroral regions with an amplification factor of 10-100, enhancing heavy species plasma and gas escape from gravity, and providing more current carrying capacity. Internal plasmas thus enable electromagnetic driving via coupling to the plasma, neutral gas and by extension, the entire body " We assess the Importance of each of these processes in terms of local escape flux production as well as global outflow, and suggest methods for their implementation within multispecies global simulation codes. We complete 'he survey with an assessment of outstanding obstacles to this objective.

Moore, Thomas Earle↗
NASA NTRS1972

Analytical Study of Gravity Effects on Laminar Diffusion Flames

A mathematical model is presented for the description of axisymmetric laminar-jet diffusion flames. The analysis includes the effects of inertia, viscosity, diffusion, gravity and combustion. These mechanisms are coupled in a boundary layer type formulation and solutions are obtained by an explicit finite difference technique. A dimensional analysis shows that the maximum flame width radius, velocity and thermodynamic state characterize the flame structure. Comparisons with experimental data showed excellent agreement for normal gravity flames and fair agreement for steady state low Reynolds number zero gravity flames. Kinetics effects and radiation are shown to be the primary mechanisms responsible for this discrepancy. Additional factors are discussed including elipticity and transient effects.

Edelman, R. B.↗
NASA NTRS1986

Oxidation of commercial purity titanium

The oxidation kinetics of commercial purity Ti-A55 exposed to laboratory air in the 593-760 C temperature range were continuously monitored by thermogravimetric analysis. The oxide thickness was measured by microscopy, and the substrate contamination was estimated from microhardness measurements. The microhardness depth profiles were converted to oxygen composition profiles using calibration depth. The oxygen diffusion coefficient in alpha-Ti appears to be approximately concentration-independent in the 1-10 at. pct oxygen range. Diffusion coefficient for oxygen in TiO2 has been estimated as a function of temperature and is found to be about 50 times the value in alpha-Ti. The metallographically prepared cross sections of the oxidized specimens revealed a 'moving boundary' in the substrate, parallel to the oxide-metal interface. This boundary was associated with a specific oxygen level of 5.0 + or - 0.5 at. pct. It occurred at a distance from the oxide-metal interface which was correlatable with temperature and time of exposure. The diffusion coefficient corresponding to the composition of this moving boundary is in excellent agreement with the effective diffusion coefficient for the substrate contamination.

Unnam, J.↗
DOE OSTI2026

Temperature dependent interfacial microstructure in HIP-bonded Al6061/Zr joints

Pressing (HIP) at 450 °C and 560 °C under 103 MPa for 90 minutes to evaluate interfacial diffusion and microstructural evolution. Sound metallurgical bonding was achieved at both temperatures, with Zr serving as an effective diffusion barrier. Microstructural analysis revealed the the formation of a (Al,Si)3Zr intermetallic layer at the Al/Zr interface, whose thickness increased from ~100 nm at 450 °C to ~2100 nm at 560 °C, consistent with temperature-driven diffusion kinetics. The thin and continuous reaction layer observed at 450 °C indicates controlled interdiffusion and minimal reaction zone growth, favorable for maintaining interface stability and ductility. At 560 °C, enhanced atomic mobility led to pronounced intermetallic development, confirming diffusion-controlled growth behavior. These results provide valuable insights for optimizing Al/Zr interface design and diffusion barrier performance in advanced structural and energy systems.

Al/Zr interface↗
NASA NTRS1980

The influence of a voltage ramp on the measurement of I-V characteristics of a solar cell

For efficiency and convenience the voltage applied to a Si solar cell is often fairly rapidly driven from zero to the open circuit value typically at a common rate of 1 V per millisecond. During this time the values of current are determined as a function of the instantaneous voltage thus producing an I-V characteristic. The present paper shows that the customary expressions for the current as a function of cell parameters still remain valid provided that the diffusion length in the expression for the dark current is changed from its steady state value L to the effective diffusion length L1 given by L1 = L(1 + qV/kT.tau) to the -1/2, where V is the ramp rate considered constant and tau is the lifetime of minority carriers. This result is true to a very good approximation provided that low level injection prevails.

Von Roos, O.↗
NASA NTRS1980

Transient and diffusion analysis of Hg Cd Te

The solution of the one dimensional planar interface solidification problem is presented. Numerical solutions are applied to experimental solute profiles to determine the effective diffusion constant for Hg Co Te. Progress on the design and construction of a high gradient furnace is reported.

Clayton, J. C.↗