Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Electron and ion density depletions measured in the STS-3 orbiter wake

The third Space Shuttle flight on Columbia carried instrumentation to measure thermal plasma density and temperature. Two separate investigations, the Plasma Diagnostics Package (PDP) and the Vehicle Charging and Potential Experiment (VCAP), carried a Langmuir Probe, and the VCAP also included a Spherical Retarding Potential Analyzer (SRPA). Only those measurements made while the PDP is in the payload bay are discussed here since the VCAP instrumentation remains in the payload bay at all times and the two measurements are compared. The wake behind a large structure (in this case the Space Shuttle Orbiter) flying through the ionospheric plasma is discussed. Much theoretical work was done regarding plasma wakes. The instrumentation on this mission gives the first data taken with a large vehicle in the ionospheric laboratory. First, the PDP Langmuir Probe and its data set will be presented, then the VCAP Langmuir Probe and SRPA with associated data. The agreement between the two data sets is discussed and then followed by some other PDP data which infers an even lower wake density.

Murphy, G. B.↗

C 4 fluxes from the sun as a star and the correlation with magnetic flux

A total of 144 C 4 wavelength 1548 SMM-UVSP spectroheliograms of solar plages were analyzed, some of which are series of exposures of the same region on the same day. Also analyzed were C 4 wavelength 1551 rasters of plages and C 4 1548 rasters of the quiet sun. The sample contains data on 17 different plages, observed on 50 different days. The center-to-limb variations of the active regions show that the optical thickness effects in the C 4 wavelength 1548 line can be neglected in the conversion from intensity to flux density. As expected for the nearly optically thin situation, the C 4 1548 line is twice as bright as the C 4 wavelength 1551 line. The average C 4 wavelength 1548 flux density for a quiet is 2700 erg/cm/s and, with surprisingly little scatter, 18,000 erg/cm/s for plages. The intensity histograms of rasters obtained at disk centers can be separated into characteristic plage and quiet-sun contributions with variable relative filling factors. The disk-averaged flux density in the C 4 doublet and the disk-averaged magnitude of the magnetic flux density are related. The relationship between the C 4 and magnetic flux densities for spatially resolved data is inferred to be almost the same, with only an additional factor of order unity in the constant of proportionality.

Schrijver, C. J.↗

Cometary dust composition

The earth based measurements and in situ sampling of Comet Halley have provided new data about the chemical composition of cometary grains. Recent progress in laboratory studies of interplanetary dust particles (IDPs) complement the comet data, allowing inferences about the mineralogy and physical structure of the comet dust to be drawn from the observed elemental composition and infrared spectra. The in situ dust composition measurements at Halley, the composition of IDPs and their relation to comet dust, and the origin of the 3.4 micron hydrocarbon feature is discussed. Related discussion is also presented on aromatic components in comets and the 3.4 micron feature. These topics are briefly summarized.

Gehrz, R. D.↗

C IV fluxes from the Sun as a star, and the correlation with magnetic flux

A total of 144 C IV wavelength 1548 Solar Maximum Mission (SMM)-UVSP spectroheliograms of solar plages were analyzed, some of which are series of exposures of the same region on the same day. Also analyzed were the C IV wavelength 1551 rasters of plages and C IV wavelength 1548 rasters of the quiet sun. The sample contained data on 17 different plages, observed on 50 different days. The center-to-limb variations of the active regions show that the optical thickness effects in the C IV wavelength 1548 line can be neglected in the conversion from intensity to flux density. As expected for the nearly optically thin situation, the C IV wavelength 1548 line is twice as bright as the C IV 1551 line. The average C IV wavelength 1548 flux density for a quiet region is 2700 ergs/cm/s and, with surprisingly little scatter, 18,000 erg/cm/s for plages. The intensity histograms of rasters obtained at disk center can be separated into characteristic plage and quiet sun contributions with variable relative filling factors. The relationship between the C IV and magnetic flux densities for spatially resolved data is inferred to be almost the same, with only an additional factor of order unity in the constant of proportionality.

Schrijver, C. J.↗

Primary sedimentary structures and the internal architecture of a Martian sand body in search of evidence for sand transport and deposition

Lunar experiences show that unmanned sample return missions, despite limitations on sample size, can produce invaluable data to infer crustal processes, regolith processes, regolith-atmosphere/ionosphere interaction processes, etc. Drill cores provide a record of regolith evolution as well as a more complete sample of the regolith than small scoops and/or rakes. It is proposed that: (1) a hole be drilled in a sand body to obtain continuous oriented cores; a depth of about 10 m would be compatible with what we know of bed form hierarchy of terrestrial stream deposits; (2) two trenches, at right angles to each other and close to the drill-hole, be dug and the walls scraped lightly such that primary/internal sedimentary structures of the sand body become visible; (3) the walls of the trenches be made gravitationally stable by impregnation techniques; (4) acetate or other peels of a strip on each wall be taken; and (5) appropriately scaled photographs of the walls be taken at different sun-angles to ensure maximum ease of interpretation of sedimentary structures; and, to correlate these structural features with those in the core at different depth levels of the core.

Basu, Abhijit↗

The sensing and perception subsystem of the NASA research telerobot

A useful space telerobot for on-orbit assembly, maintenance, and repair tasks must have a sensing and perception subsystem which can provide the locations, orientations, and velocities of all relevant objects in the work environment. This function must be accomplished with sufficient speed and accuracy to permit effective grappling and manipulation. Appropriate symbolic names must be attached to each object for use by higher-level planning algorithms. Sensor data and inferences must be presented to the remote human operator in a way that is both comprehensible in ensuring safe autonomous operation and useful for direct teleoperation. Research at JPL toward these objectives is described.

Wilcox, B.↗

Interior structure of Neptune - Comparison with Uranus

Measurements of rotation rates and gravitational harmonics of Neptune made with the Voyager 2 spacecraft allow tighter constraints on models of the planet's interior. Shock measurements of material that may match the composition of Neptune, the so-called planetary 'ice', have been carried out to pressures exceeding 200 gigapascals (2 megabars). Comparison of shock data with inferred pressure-density profiles for both Uranus and Neptune shows substantial similarity through most of the mass of both planets. Analysis of the effect of Neptune's strong differential rotation on its gravitational harmonics indicates that differential rotation involves only the outermost few percent of Neptune's mass.

Hubbard, W. B.↗

Galileo support observations of Asteroid 951 Gaspra

Observations of 951 Gaspra in support of the Galileo spacecraft encounter are reported. Photometric observations of the asteroid yield a synodic rotational period of 7.042 46 and a slope parameter G of 0.285 + or - 0.005. It is inferred from data obtained on May 18, 1990, that the subearth latitude was higher at that time than it was earlier in the opposition. This places a limit on the possible pole orientation of the asteroid. A slope parameter of 0.25 is proposed on the basis of a comparison of the present result for the slope parameter with that of Barucci et al. (1990). A low-quality 0.8-2.5-micron spectrum of 951 Gaspra suggests a high olivine/pyroxene ratio, which is indicative of a source region in the lower mantle of a differentiated asteroid, and similarities to 8 Flora and particularly 15 Eunomia.

Goldader, Jeffrey D.↗

Does UV instrumentation effectively measure ozone abundance?

Measurements of O3 on Mars provide significant information about the chemistry and composition of the atmosphere, including long-term changes. The most extensive and accurate data were inferred from the Mariner 9 UV spectrometer experiment. Mars O3 shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 microns at equatorial latitudes to 60 microns over the northern winter polar latitudes (1 micron-atm is a column abundance of 2.689 x 10(exp 15) molecules cm(exp-2)). The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms in one of its two spectral channels every 3 seconds with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 km(exp 2). Measurements were made for almost half a Martian year, with winter and spring in the Northern Hemisphere and summer and fall in the Southern Hemisphere. The detectability limit of the spectrometer was approximately 3 microns of ozone. The UV spectrometer on Mariner 9 was incapable of penetrating the dust during dust storms; the single-scattering albedo and phase function of airborne dust and cloud ice are not known to the degree required to extract the small UV signal reflected up from near the surface. The reflectance spectroscopy technique would also have difficulty detecting the total column abundance of O3 in cases where large dust abundances exist together with the polar hood, especially at high latitudes where large solar zenith angles magnify those optical depths; yet these cases would contain the maximum O3, based on theoretical results. It is quite possible that the maximum O3 column abundance observed by Mariner 9 of 60 microns is common. In fact, larger quantities may exist in some of the colder areas with optically thick clouds and dust. As the Viking period often had more atmospheric dust loading than did that of Mariner 9, the reflectance spectroscopy technique may even have been incapable of detecting the entire O3 column abundance during much of the Mars year that Viking observed, particularly at high latitudes.

Lindner, Bernhard Lee↗

Patterns of seismic activity preceding large earthquakes

A mechanical model of seismic faults is employed to investigate the seismic activities that occur prior to major events. The block-and-spring model dynamically generates a statistical distribution of smaller slipping events that precede large events, and the results satisfy the Gutenberg-Richter law. The scaling behavior during a loading cycle suggests small but systematic variations in space and time with maximum activity acceleration near the future epicenter. Activity patterns inferred from data on seismicity in California demonstrate a regional aspect; increased activity in certain areas are found to precede major earthquake events. One example is given regarding the Loma Prieta earthquake of 1989 which is located near a fault section associated with increased activity levels.

Shaw, Bruce E.↗

Molecular gas temperature and density in spiral galaxies

We combine beam-matched CO-13, CO-12 J = 3 yields 2 and J = 2 yields 1 line data to infer the molecular gas excitation conditions in the central 500 to 1600 pc diameters of a small sample of infrared-bright external galaxies: NGC253, IC342, M 83, Maffei 2, and NGC6946. Additional observations of the J = 1 yields 0 lines of C-18O and CO-13 set limits on the opacity of the CO-13 J = 1 yields 0 line averaged over the central kiloparsec of these spiral galaxies.

Wall, W. F.↗

Gravity wave and tidal structures between 60 and 140 km inferred from space shuttle reentry data

This study presents an analysis of density measurements made using high-resolution accelerometers aboard several space shuttles at altitudes from 60 to 140 km during reentry into the earth's atmosphere. The observed density fluctuations are interpreted in terms of gravity waves and tides and provide evidence of the importance of such motions well into the thermosphere. Height profiles of fractional density variance reveal that wave amplitudes increase at a rate consistent with observations at lower levels up to about 90 km. The rate of amplitude growth decreases at greater heights, however, and appears to cease above about 110 km. Wave amplitudes are nevertheless large at these heights and suggest that gravity waves may play an important role in forcing of the lower thermosphere.

Fritts, David C.↗

Kiloparsec-scale molecular gas excitation in spiral galaxies

We combine beam-matched (C-13)O, (C-12)O J = 3 - 2 and J = 2 - 1 line data to infer the molecular gas excitation conditions in the central 500 to 1600 pc diameters of a small sample of IR-bright external galaxies: NGC 253, IC 342, M83, Maffei 2, and NGC 6946. We find that the central 170 to 530 pc diameter regions have typical molecular gas densities ranging from approximately less than 10,000/cu cm (in M83) to approximately greater than 100,000/cu cm (in NGC 253) and that, outside of these regions, the densities are likely to be approximately less than 10,000/cu cm. The molecular clouds outside the inner 170-530 pc are at least as warm as the molecular clouds in our Galaxy. Column densities derived from integrated (C-13)O line strengths and H-alpha surface brightnesses suggest that the star formation rate is enhanced in the central 170-530 pc diameters by an order of magnitude over that inferred for the outer star-forming disks in spiral galaxies.

Wall, W. F.↗

Cloud properties inferred from 8-12 micron data

A trispectral combination of observations at 8-, 11-, and 12-micron bands is suggested for detecting cloud and cloud properties in the infrared. Atmospheric ice and water vapor absorption peak in opposite halves of the window region so that positive 8-minus-11-micron brightness temperature differences indicate cloud, while near-zero or negative differences indicate clear regions. The absorption coefficient for water increases more between 11 and 12 microns than between 8 and 11 microns, while for ice, the reverse is true. Cloud phases is determined by a scatter diagram of 8-minus-11-micron versus 11-minus-12-micron brightness temperature differences; ice cloud shows a slope greater than 1 and water cloud less than 1. The trispectral brightness temperature method was tested upon high-resolution interferometer data resulting in clear-cloud and cloud-phase delineation. Simulations using differing 8-micron bandwidths revealed no significant degradation of cloud property detection. Thus, the 8-micron bandwidth for future satellites can be selected based on the requirements of other applications, such as surface characterization studies. Application of the technique to current polar-orbiting High-Resolution Infrared Sounder (HIRS)-Advanced Very High Resolution Radiometer (AVHRR) datasets is constrained by the nonuniformity of the cloud scenes sensed within the large HIRS field of view. Analysis of MAS (MODIS Airborne Simulator) high-spatial resolution (500 m) data with all three 8-, 11-, and 12-micron bands revealed sharp delineation of differing cloud and background scenes, from which a simple automated threshold technique was developed. Cloud phase, clear-sky, and qualitative differences in cloud emissivity and cloud height were identified on a case study segment from 24 November 1991, consistent with the scene. More rigorous techniques would allow further cloud parameter clarification. The opportunities for global cloud delineation with the Moderate-Resolution Imaging Spectrometer (MODIS) appear excellent. The spectral selection, the spatial resolution, and the global coverage are all well suited for significant advances.

Strabala, Kathleen I.↗

Topography of closed depressions, scarps, and grabens in the north Tharsis region of Mars: Implications for shallow crustal discontinuities and Graben formation

Using Viking Orbiter images, detailed photoclinometric profiles were obtained across 10 irregular depressions, 32 fretted fractures, 40 troughs and pits, 124 solitary scarps, and 370 simple grabens in the north Tharsis region of Mars. These data allow inferences to be made on the shallow crustal structure of this region. The frequency modes of measured scarp heights correspond with previous general thickness estimates of the heavily cratered and rigded plains units. The depths of the flat-floored irregular depressions (55-175 m), fretted fractures (85-890 m), and troughs and pits (60-1620 m) are also similar to scarp heights (thicknesses) of the geologic units in which these depressions occur, which suggests that the depths of these flat-floored features were controlled by erosional base levels created by lithologic contacts. Although the features have a similar age, both their depths and their observed local structural control increase in the order listed above, which suggests that the more advanced stages of associated fracturing facilitated the development of these depressions by increasing permeability. If a ground-ice zone is a factor in development of these features, as has been suggested, our observation that the depths of these features decrease with increasing latitude suggests that either the thickness of the ground-ice zone does not increase poleward or the depths of the depressions were controlled by the top of the ground-ice zone whose depth may decrease with latitude.

Davis, P. A.↗

Cloud-radiation interactions and their parameterization in climate models

This report contains papers from the International Workshop on Cloud-Radiation Interactions and Their Parameterization in Climate Models met on 18-20 October 1993 in Camp Springs, Maryland, USA. It was organized by the Joint Working Group on Clouds and Radiation of the International Association of Meteorology and Atmospheric Sciences. Recommendations were grouped into three broad areas: (1) general circulation models (GCMs), (2) satellite studies, and (3) process studies. Each of the panels developed recommendations on the themes of the workshop. Explicitly or implicitly, each panel independently recommended observations of basic cloud microphysical properties (water content, phase, size) on the scales resolved by GCMs. Such observations are necessary to validate cloud parameterizations in GCMs, to use satellite data to infer radiative forcing in the atmosphere and at the earth's surface, and to refine the process models which are used to develop advanced cloud parameterizations.

Source record↗

Synthesis of Contributed Simulations for OREX Test Cases

A synthesis is presented of the computer simulations of the flow over the Orbital Reentry Vehicle (ORV) at the 92.8 km and 63.6 km Earth altitude trajectory points that were discussed at the First Europe-U.S. High Speed Flow Field Database Workshop Part 2, Napoli, Italy, November 1997. For the materials used on the surface of ORV, the non-catalytic wall condition is appropriate at 92.8 km and the finite-rate catalytic wall condition at 63.6 km. Additional simulations are required for establishing the independency of the discussed results from numerics. The proper modeling of natural phenomena needs further sensitivity studies. The uncertainties of inferred flight data are lacking for a proper evaluation of the presented results.

Mehta, Unmeel B.↗

Triton's Distorted Atmosphere

A stellar-occultation light curve for Triton shows asymmetry that can be understood if Triton's middle atmosphere is distorted from spherical symmetry. Although a globally oblate model can explain the data, the inferred atmospheric flattening is so large that it could be caused only by an unrealistic internal mass distribution or highly supersonic zonal winds. Cyclostrophic winds confined to a jet near Triton's northern or southern limbs (or both) could also be responsible for the details of the light curve, but such winds are required to be slightly supersonic. Hazes and clouds in the atmosphere are unlikely to have caused the asymmetry in the light curve.

Elliot, J. L.↗