Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Simulation of Statistical Fluctuations in the Spin Precession Measurements at RHIC

Measurements of the driven spin coherent precession S x (t)=S x (0) - S x (1) sin(ωt+φ 0 ) were initiated in RHIC Run13. The expected value of the precession amplitude S x (1) ~ 2 x 10 -4 is about the statistical error in a single measurement and data fit gives a biased estimate of the S x (1) . For a proper statistical interpretation of the results of the several measurements, statistical fluctuations were studied using Monte-Carlo simulation. Preliminary results of the spin precession measurements in RHIC Run13 are presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

NDE reliability and probability of detection (POD) evolution and paradigm shift

The subject of NDE Reliability and POD has gone through multiple phases since its humble beginning in the late 1960s. This was followed by several programs including the important one nicknamed “Have Cracks – Will Travel” or in short “Have Cracks” by Lockheed Georgia Company for US Air Force during 1974–1978. This and other studies ultimately led to a series of developments in the field of reliability and POD starting from the introduction of fracture mechanics and Damaged Tolerant Design (DTD) to statistical framework by Bernes and Hovey in 1981 for POD estimation to MIL-STD HDBK 1823 (1999) and 1823A (2009). During the last decade, various groups and researchers have further studied the reliability and POD using Model Assisted POD (MAPOD), Simulation Assisted POD (SAPOD), and applying Bayesian Statistics. All and each of these developments had one objective, i.e., improving accuracy of life prediction in components that to a large extent depends on the reliability and capability of NDE methods. Therefore, it is essential to have a reliable detection and sizing of large flaws in components. Currently, POD is used for studying reliability and capability of NDE methods, though POD data offers no absolute truth regarding NDE reliability, i.e., system capability, effects of flaw morphology, and quantifying the human factors. Furthermore, reliability and POD have been reported alike in meaning but POD is not NDE reliability. POD is a subset of the reliability that consists of six phases: 1) samples selection using DOE, 2) NDE equipment setup and calibration, 3) System Measurement Evaluation (SME) including Gage Repeatability and Reproducibility (Gage R and R) and Analysis Of Variance (ANOVA), 4) NDE system capability and electronic and physical saturation, 5) acquiring and fitting data to a model, and data analysis, and 6) POD estimation. This paper provides an overview of all major POD milestones for the last several decades and discuss rationale for using Integrated Computational Materials Engineering (ICME), MAPOD, SAPOD, and Bayesian statistics for studying controllable and non-controllable variables including human factors for estimating POD. Another objective is to list gaps between “hoped for” versus validated or fielded failed hardware.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Equilibrium, Kinetic and Thermodynamic Studies Of Lead (II) Sorption on Hydrolyzed Starch Graft Copolymers

Hydrolyzed starch graft poly (acrylic acid) and starch graft poly(acrylonitrile) copolymers were used as a sorbents for the removal of Pb(II) from aqueous solution in batch process. The sorbents were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The effect of contact time, initial concentration and temperature were assessed to optimize the conditions for maximum sorption of the metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, Dubinin Radushkevich and Sips isotherm models. The Freundlich and the Sips isotherms confirmed the applicability of the models. The sorption capacity of the sorbent was found to be 118.61 mg/g for starch graft poly (acrylic) acid and 115.83 mg/g for starch graft poly (acrylonitrile). The Sorption kinetics was assessed by Lagergren pseudo first order, pseudo second order, Elovich equation, Intraparticle diffusion and the liquid film diffusion models. The experimental data fitted very well with the Elovich equation and the Intraparticle kinetic models. The thermodynamic analysis showed that the sorption was a spontaneous and endothermic process. The results indicated that starch graft copolymers can be used as an effective sorbents for Pb (II) removal from aqueous media.

36 MATERIALS SCIENCE↗
DOE OSTI2015

DShaper: An approach for handling missing low-Q data in pair distribution function analysis of nanostructured systems

In this work we discuss the potential problems and currently available solutions in modeling powder-diffraction based pair-distribution function (PDF) data from systems where morphological feature information content includes distances in the nanometer length scale, such as finite nanoparticles, nanoporous networks, and nanoscale precipitates in bulk materials. The implications of an experimental finite minimum Q-value are addressed by simulation, which also demonstrates the advantages of combining PDF data with small angle scattering data (SAS). In addition, we introduce a simple Fortran90 code, DShaper , which may be incorporated into PDF data fitting routines in order to approximate the so-called shape-function for any atomistic model.

36 MATERIALS SCIENCE↗
DOE OSTI2016

SU-C-201-07: Towards Clinical Cherenkov Emission Dosimetry: Stopping Power-To-Cherenkov Power Ratios and Beam Quality Specification of Clinical Electron Beams

Purpose: We propose a Cherenkov emission (CE)-based reference dosimetry method, which in contrast to ionization chamber-based dosimetry, employs spectrum-averaged electron restricted mass collision stopping power-to-Cherenkov power ratios (SCRs), and we examine Monte Carlo-calculated SCRs and beam quality specification of clinical electron beams. Methods: The EGSnrc user code SPRRZnrc was modified to compute SCRs instead of stopping-power ratios (single medium: water; cut-off: CE threshold (observing Spencer-Attix conditions); CE power: Frank-Tamm). SCRs are calculated with BEAMnrc for realistic electron beams with nominal energies of 6–22 MeV from three Varian accelerators (TrueBeam Clinac 21EX, Clinac 2100C/D) and for mono-energetic beams of energies equal to the mean electron energy at the water surface. Sources of deviation between clinical and mono-energetic SCRs are analyzed quantitatively. A universal fit for the beam-quality index R{sub 50} in terms of the depth of 50% CE C{sub 50} is carried out. Results: SCRs at reference depth are overestimated by mono-energetic values by up to 0.2% for a 6-MeV beam and underestimated by up to 2.3% for a 22-MeV beam. The variation is mainly due to the clinical beam spectrum and photon contamination. Beam angular spread has a small effect across all depths and energies. The influence of the electron spectrum becomes increasingly significant at large depths, while at shallow depths and high beam energies photon contamination is predominant (up to 2.0%). The universal data fit reveals a strong linear correlation between R{sub 50} and C{sub 50} (ρ > 0.99999). Conclusion: CE is inherent to radiotherapy beams and can be detected outside the beam with available optical technologies, which makes it an ideal candidate for out-of-beam high-resolution 3D dosimetry. Successful clinical implementation of CE dosimetry hinges on the development of robust protocols for converting measured CE to radiation dose. Our findings constitute a key step towards clinical CE dosimetry.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Applications of tribology to determine attrition by wear of particulate solids in CFB systems

In recent years, much attention has been focused on the development of novel technologies for carbon capture and chemicals production that utilize a circulating fluidized bed (CFB) configuration; examples include chemical looping combustion and circulation of temperature swing adsorbents in a CFB configuration for CO 2 capture. A major uncertainty in determining the economic feasibility of these technologies is the required solids makeup rate, which, among other factors, is due to impact and wear attrition at various locations, including standpipes, cyclones, and the gas jets in fluid beds. While correlations have been developed that estimate the attrition rates at these areas, these correlations are dependent on constants that are uncertain without extensive experiment in the corresponding unit operation. Thus, it is difficult to determine the attrition rate a priori without performing extensive experiments on the materials or scaling up entirely. In this work, the authors outline a methodology for predictive attrition based on fundamental material properties from fields of tribology—specifically, the study of wear—to the knowledge of forces and sliding distances determined from hydrodynamic models to develop basic attrition models for novel CFB systems. The equations are derived for the standpipe and cyclone, which are common components found in CFBs, and the cyclone equation is compared to experimental data of attrition in the literature. The cyclone equation derived in this work results in an abrasion rate based on (1) material properties such as particle density and hardness, (2) inlet velocity, and (3) cyclone geometry. According to this equation, increasing the diameter of the cyclone and the solids inlet velocity tends to increase the rate of abrasion of the catalyst, while decreasing the hardness increases the abrasion rate. The functionality of the increasing attrition rate with velocity increase implies that increasing the efficiency of the cyclone may also increase the attrition rate via abrasion. With modifications to the severity coefficient term to include the solids loading, the cyclone equation derived in this work fits data from Reppenhagen and Werther with a coefficient of determination (R2) of 92%.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2017

Probing the distance-duality relation with high- z data

Measurements of strong gravitational lensing jointly with type Ia supernovae (SNe Ia) observations have been used to test the validity of the cosmic distance duality relation (CDDR), D{sub L}( z )/[(1+ z ){sup 2D{sub A}}( z )]=η=1, where D{sub L}(z) and D{sub A}(z) are the luminosity and the angular diameter distances to a given redshift z , respectively. However, several lensing systems lie in the interval 1.4 ≤ z ≤ 3.6 i.e., beyond the redshift range of current SNe Ia compilations ( z ≈ 1.50), which prevents this kind of test to be fully explored. In this paper, we circumvent this problem by testing the CDDR considering observations of strong gravitational lensing along with SNe Ia and (a subsample from) the latest gamma-ray burst distance modulus data, whose redshift range is 0.033 ≤ z ≤ 9.3. We parameterize their luminosity distances with a second degree polynomial function and search for possible deviations from the CDDR validity by using four different η( z ) functions: η( z )=1+η{sub 0z}, η( z )=1+η{sub 0z}/(1+ z ), η( z )=(1+ z ){sup η{sub 0}} and η( z )=1+η{sub 0ln}(1+ z ). Unlike previous tests done at redshifts lower than 1.50, the likelihood for η{sub 0} depends strongly on the η( z ) function considered, but we find no significant deviation from the CDDR validity (η{sub 0}=0). However, our analyses also point to the fact that caution is needed when one fits data in higher redshifts to test the CDDR as well as a better understanding of the mass distribution of lenses also is required for more accurate results.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Coulomb-free 1S0 p − p scattering length from the quasi-free p + d → p + p + n reaction and its relation to universality

Abstract The Coulomb-free 1 S 0 proton-proton ( p - p ) scattering length relies heavily on numerous and distinct theoretical techniques to remove the Coulomb contribution. Here, it has been determined from the half-off-the-energy-shell p - p scattering cross section measured at center-of-mass energies below 1 MeV using the quasi-free p + d → p + p + n reaction. A Bayesian data-fitting approach using the expression of the s-wave nucleon-nucleon scattering cross section returned a p - p scattering length $${a}_{pp}=-18.1{7}_{-0.58}^{+0.52}{| }_{stat}\pm 0.0{1}_{syst}$$ a p p = − 18.1 7 − 0.58 + 0.52 ∣ s t a t ± 0.0 1 s y s t fm and effective range r 0 = 2.80 ± 0.05 s t a t ± 0.001 s y s t fm. A model based on universality concepts has been developed to interpret this result. It accounts for the short-range interaction as a whole, nuclear and residual electromagnetic, according to what the s-wave phase-shift δ does in the description of low-energy nucleon-nucleon scattering data. We conclude that our parameters are representative of the short-range physics and propose to assess the charge symmetry breaking of the short-range interaction instead of just the nuclear interaction. This is consistent with the current understanding that the charge dependence of nuclear forces is due to different masses of up-down quarks and their electromagnetic interactions. This achievement suggests that these properties have a lesser than expected impact in the context of the charge symmetry breaking.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Pore-Scale Determination of Gas Relative Permeability in Hydrate-Bearing Sediments Using X-Ray Computed Micro-Tomography and Lattice Boltzmann Method

This work uses X-ray computed micro-tomography (μCT) to monitor xenon hydrate growth in asandpack under the excess gas condition. The μCT images give pore-scale hydrate distribution and porehabit in space and time. We use the lattice Boltzmann method to calculate gas relative permeability (k rg ) as a function of hydrate saturation (S hyd ) in the pore structure of the experimental hydrate-bearingsand retrieved from μCT data. The results suggest the krg-Shyd data fit well a new model krg=(1-S hyd )•exp(–4.95•S hyd ) rather than the simple Corey model. In addition, we calculate k rg -S hyd curves using digitalmodels of hydrate-bearing sand based on idealized grain-attaching, coarse pore-filling, and dispersed pore-filling hydrate habits. Our pore-scale measurements and modeling show that the k rg -S hyd curves are similar regardless of whether hydrate crystals develop grain-attaching or coarse pore-filling habits. The dispersed pore filling habit exhibits much lower gas relative permeability than the other two, but it is not observed in the experiment and not compatible with Ostwald ripening mechanisms. We find that a single grain-shape factor can be used in the Carman-Kozeny equation to calculate k rg -S hyd data with known porosity and average grain diameter, suggesting it is a useful model for hydrate-bearing sand.

58 GEOSCIENCES↗
DOE OSTI2011

Corrections to the apparent value of the cosmological constant due to local inhomogeneities

Supernovae observations strongly support the presence of a cosmological constant, but its value, which we will call apparent, is normally determined assuming that the Universe can be accurately described by a homogeneous model. Even in the presence of a cosmological constant we cannot exclude nevertheless the presence of a small local inhomogeneity which could affect the apparent value of the cosmological constant. Neglecting the presence of the inhomogeneity can in fact introduce a systematic misinterpretation of cosmological data, leading to the distinction between an apparent and true value of the cosmological constant. We establish the theoretical framework to calculate the corrections to the apparent value of the cosmological constant by modeling the local inhomogeneity with a ΛLTB solution. Our assumption to be at the center of a spherically symmetric inhomogeneous matter distribution correspond to effectively calculate the monopole contribution of the large scale inhomogeneities surrounding us, which we expect to be the dominant one, because of other observations supporting a high level of isotropy of the Universe around us. By performing a local Taylor expansion we analyze the number of independent degrees of freedom which determine the local shape of the inhomogeneity, and consider the issue of central smoothness, showing how the same correction can correspond to different inhomogeneity profiles. Contrary to previous attempts to fit data using large void models our approach is quite general. The correction to the apparent value of the cosmological constant is in fact present for local inhomogeneities of any size, and should always be taken appropriately into account both theoretically and observationally.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Initial study of Schroedinger eigenmaps for spectral target detection

Spectral target detection refers to the process of searching for a specific material with a known spectrum over a large area containing materials with different spectral signatures. Traditional target detection methods in hyperspectral imagery (HSI) require assuming the data fit some statistical or geometric models and based on the model, to estimate parameters for defining a hypothesis test, where one class (i.e., target class) is chosen over the other classes (i.e., background class). Nonlinear manifold learning methods such as Laplacian eigenmaps (LE) have extensively shown their potential use in HSI processing, specifically in classification or segmentation. Recently, Schroedinger eigenmaps (SE), which is built upon LE, has been introduced as a semisupervised classification method. In SE, the former Laplacian operator is replaced by the Schroedinger operator. The Schroedinger operator includes by definition, a potential term V that steers the transformation in certain directions improving the separability between classes. In this regard, we propose a methodology for target detection that is not based on the traditional schemes and that does not need the estimation of statistical or geometric parameters. This method is based on SE, where the potential term V is taken into consideration to include the prior knowledge about the target class and use it to steer the transformation in directions where the target location in the new space is known and the separability between target and background is augmented. An initial study of how SE can be used in a target detection scheme for HSI is shown here. Inscene pixel and spectral signature detection approaches are presented. Finally, the HSI data used comprise various target panels for testing simultaneous detection of multiple objects with different complexities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Isosymmetric pressure-induced bonding increase changes compression behavior of clinopyroxenes across jadeite-aegirine solid solution in subduction zones

Pyroxenes are among the most important minerals of Earth's crust and upper mantle and play significant role in controlling subduction at convergent margins. In this study, synchrotron-based single-crystal X-ray diffraction experiments were carried out on a natural aegirine [NaFe 3+ Si 2 O 6 ] sample at ambient temperature and high pressures to 60 GPa, simulating conditions within the coldest part of a subduction zone consisting of old lithosphere. The diffraction data reveal no obvious sign of structural phase transition in aegirine within this pressure range; however, several relevant structural parameter trends change noticeably at approximately 24 GPa, indicating the presence of the previously predicted isosymmetric bonding change, related to increase of coordination number of Na + at M2 site. The pressure-volume data, fit with third-order Birch-Murnaghan (BM3) equation of state over the whole pressure range, yields K T0 = 126(2) GPa and K' T0 = 3.3(1), while separate BM3 fits performed for the 0–24.0 GPa and 29.9–60.4 GPa pressure ranges give K T0 = 118(3) GPa, K' T0 = 4.2(3) and K T0 = 133(2) GPa, K' T0 = 3.0(1), suggesting that the structure stiffens as a result of the new bond formation. Aegirine exhibits strong anisotropic compression with unit strain axial ratios ε 1 :ε 2 :ε 3 = 1.00:2.44:1.64. Structural refinements reveal that NaO 8 polyhedron is the most compressible and SiO 4 tetrahedron has the lowest compressibility. Lastly, the consequence of bonding transition is that the compressional behavior of aegirine below ~24 GPa and above that pressure is quite different, with likely consequences for relevant thermodynamic parameters and ion diffusion coefficients.

58 GEOSCIENCES↗
DOE OSTI2023

Monitoring Structural and Electronic Changes of Supported Metal Catalysts Using Combined X‐Ray Techniques

Supported metal nanoparticle catalysts have become increasingly crucial for many catalytic applications. However, long-term catalyst stability remains a problem due to catalyst deactivation caused by coke formation and sintering. The deposition of a thin overcoating via atomic layer deposition (ALD) onto metal-supported nanoparticles has shown to greatly inhibit catalyst deactivation. This work utilizes a model catalyst system comprised of Pt nanoparticles supported on Al 2 O 3 to demonstrate the effect of an atomically thin overcoating on supported metal nanoparticles. Continuous operando small-angle X-ray scattering (SAXS) and X-ray absorption near edge spectroscopy (XANES) monitor structural and electronic changes to the catalyst and overcoating during calcination. SAXS data fitting reveals the formation of nanopores in the overcoating at high temperatures, while XANES monitors the oxidation state of the Pt catalyst. Herein, the usefulness of combined X-ray techniques is demonstrated to characterize supported metal catalysts to further understanding of the synergistic effects of the ALD overcoating to aid in the design of new catalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Decadal carbon decomposition dynamics in three peatlands in Northern Minnesota

The uppermost portion of the peat profile, an area of active diagenetic processes, is exceedingly important for understanding peatland dynamics and the diagenesis and geochemistry of atmospherically-deposited materials. In this study, we investigated high resolution carbon (C) accrual and peat decomposition rates at two Sphagnum-rich ombrotrophic bogs and one fen in northern Minnesota, USA by analyzing 1 cm increments from 30 cm thick intact frozen blocks of peat soil. We conducted radiocarbon analysis of Sphagnum cellulose to determine peat age and net C accumulation at each depth interval. Calibrated peat ages were determined using CALIBomb and a compilation of calibration datasets for the pre-bomb period. We fit data with a negative exponential accumulation model and used model-derived parameters to estimate net primary productivity (NPP) and a peat decomposition rate constant k. FTIR spectroscopy and C:N were used to derive humification indices and to chemically characterize the peat. NPP ranged from 180 to 266 g C m -2 year -1 , k ranged from 0.015 to 0.019 year -1 . Net C accumulation rates ranged from 112 to 174 g C m -2 year -1 at 25 years and 70 to 113 g C m -2 year-1 at 50 years. Mass loss was up to 55% during the first 50 years of peat accumulation. Decomposition is greater at depth in the bogs—where 25 cm of peat correspond to 55 years of peat accumulation—than in the fen, where peat age is approximately 25 years at 25 cm depth. Lastly, information on fine-scale variations in peat mass decomposition and loss across ombrotrophic bogs and a fen help interpret other diagenetic processes in peatlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Spin State of Cobalt and Electrical Transport Mechanism in MgCo{sub 2}O{sub 4} System

MgCo{sub 2}O{sub 4} samples were synthesized by inverse co-precipitation method. The formation of a single-phase spinel structure was confirmed by X-ray diffraction measurements and Fourier-transform infrared spectroscopy. The samples crystallized in a face-centered cubic structure with Fd-3m space group as revealed from the Rietveld refinement of X-ray diffraction data. Magnetic measurements carried out in a broad temperature range of 5–300 K showed antiferromagnetic to paramagnetic phase transition (Neel temperature) observed at 101 K. Magnetic susceptibility data fitted using the Curie Weiss law and effective Bohr magnetic moment (μ{sub eff}) for Co atoms was determined. Calculated μ{sub eff} comes out to be 3.05 μ{sub B}. These results were correlated to the spin states of Co{sup 3+} atoms. A small hysteresis in the field-dependent magnetization MH loop taken at 5 K indicates the existence of weak ferromagnetism in this system. The electrical resistivity measurement in the temperature range 77–750 K displayed the semiconducting-like behavior for this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2011

Equation of State of CAS Phase to Pressure of the Uppermost Lower Mantle at Ambient Temperature

The CAS phase is a major constituent phase for the continental crust and basaltic compositions at the P-T conditions of the Earth's mantle, and potentially plays an important role in the geodynamic processes related to slab subduction. Its equation of state has been investigated here at ambient temperature up to about 25 GPa by using a diamond-anvil cell and synchrotron X-ray radiation. Its P-V data, fitted to the third-order Birch-Murnaghan equation, yield an isothermal bulk modulus (K'{sub T}) of 185 (9) GPa and first pressure derivative (K'{sub T} ) of 7.2 (12). If K'{sub T} is fixed at 4, the derived K{sub T} is 212 (4) GPa. Additionally, the CAS phase is strongly elastically anisotropic, with its a-axis direction much less compressible than c-axis direction: K{sub T-a}:K{sub T-c} = 2.19.

58 GEOSCIENCES↗
DOE OSTI2019

Correlation between Antimicrobial Activity and Bioactivity of Na-Mica and Na-Mica/Fluorapatite Glass and Glass-Ceramics and Their Corrosion Protection of Titanium in Simulated Body Fluid

The improvement in bioactivity of titanium (Ti) surface was achieved via coating it with Na-mica and Na-mica/fluorapatite glass and glass-ceramic using the low-cost electrophoretic deposition technique. Two compositions from pure Na-mica (M) and 80 Na-mica/20 fluorapatite glasses (MF) were prepared in the system SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-MgF{sub 2}-Na{sub 2}O-B{sub 2}O{sub 3} using melting–quenching technique. Characterization of the as-prepared glasses and their counterpart glass-ceramics was studied using differential thermal analysis (DTA), x-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier Transform-IR (FTIR) spectroscopy techniques. The bioactivity behavior was proved by studying the XRD, FTIR and SEM after immersing both glass and glass-ceramic samples in simulated body fluid (SBF). Both M and MF glasses and glass-ceramics showed high microhardness measurements and good antibacterial behavior. In vitro biodegradation was studied by using electrochemical corrosion behavior of the prepared glass- and glass-ceramic-coated Ti in SBF. The prepared coated Ti showed good corrosion resistance in SBF at 37 °C using potentiodynamic polarization technique, and the impedance data fitting explained the structure of the coating and the adsorption of SBF ions on the Ti surface. The MFGC provides the best corrosion-resistant coating, especially after sintering it.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A mathematical approach to using the forgetting curve to evaluate experience and training factors in human reliability analysis

Traditional human reliability analysis (HRA) methods have difficulty dealing with the dynamic nature of factors such as time and rely on static and expert-judgment-based assessments of performance-shaping factors (PSFs) across limited levels. In this study, we introduce a mathematical approach for dynamically evaluating the experience and training PSF. Our proposed method integrates the psychological concept of the “forgetting curve” to evaluate how PSFs are impacted by the number of trainings and the time elapsed since training. To confirm the validity of the model, we provide experimental data fitted by identifying the quantitative relationship between training and human performance. This research enables dynamic and objective assessments, thus reducing reliance on subjective expert judgment and improving the accuracy of HRA.

99 - GENERAL AND MISCELLANEOUS↗