Search NASA⌕ Search

SEARCH · Search NASA

Results for “Decadal Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Optimal management of electric hotel loads in mild hybrid heavy duty truck

Here, the problem of engine idling for heavy-duty trucks has been under study for decades with Auxiliary Power Units (APUs) and Truck Stop Electrification (TSE) as the most compelling solutions. With the electrification of trucks approaching feasibility in terms of cost-effective technology, hybridization offers another “degree of freedom” to tackle the problem. Here, this work aims at exploiting a battery pack of a 48 V mild-hybrid heavy-duty truck to store sufficient onboard energy for powering the auxiliary loads during the hoteling. This problem is not trivial, as the battery packs typically cannot recover the entire energy required through regeneration alone; hence an optimal energy management strategy needs to be employed to charge the battery through the engine during drive operation. This strategy optimizes powertrain performances among the four modes: (i) Engine of Coasting (EOC), (ii) Regeneration by braking, (iii) Regeneration by engine, and (iv) engine idling. This paper presents the development of a Dynamic Programming (DP) framework that employs a multi-objective cost function to minimize the fuel consumption and maximize the regeneration using the above-mentioned four modes. A typical heavy-duty truck drive cycle is used to represent the drive phase, with mandatory hoteling stops as per regulations. A comprehensive powertrain model is developed using validated components’ model. The DP employs two state variables: battery State-of-Charge (SOC) and engine mode, and three control inputs: (i) the engine ON–OFF state, (ii) clutch engagement state, and (iii) power request at the Electric Machine (EM) for calculating optimal SOC trajectory. The framework also tackles rapid engine ON–OFF scenarios to avoid the challenges associated with DP and the compromises in fuel cost with those approaches. Finally, the effectiveness of the proposed framework is tested for potential fuel savings on two different battery packs by performing the full cycle simulations. The results show 6.47% of fuel consumption reduction as compared to traditional APU-based heavy-duty truck.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Response of Indian summer monsoon rainfall to remote carbonaceous aerosols at short time scales: Teleconnections and feedbacks

The effect of atmospheric aerosols on Indian monsoon is one of the scientifically challenging and societally relevant research issues of the recent decades. Past studies have derived inferences mostly based on local emissions and their impacts thereupon. However, more recent studies have shown that the remote effects driven by aerosols elsewhere could also impact the monsoon system on different time scales. Our study using an atmospheric general circulation model (AGCM) shows that regional carbonaceous aerosol emissions (from North America, Europe and North Africa and Asia) can significantly alter Indian summer monsoon rainfall. It is interesting to note that the effects of remote aerosols are larger and bear a resemblance to each other in comparison to local emissions. Here, our study reveals that the modulation of large-scale circulation induced by regional warming by carbonaceous aerosols leads to teleconnection patterns around the globe, thereby changing the precipitation depending on the phase of these disturbances. We also find that the effects of remote carbonaceous aerosols are strengthened by modulation/feedback through natural dust aerosols over the Arabian Sea with subsequent increase in rainfall over India. The results signify that the changes in the aerosol emissions in one region could lead to the change in precipitation over other regions through global teleconnection and associated feedbacks induced by regional atmospheric warming and/or cooling.

Carbonaceous aerosols↗
DOE OSTI2023

Broadly neutralizing anti-S2 antibodies protect against all three human betacoronaviruses that cause deadly disease

Pan-betacoronavirus neutralizing antibodies may hold the key to developing broadly protective vaccines against novel pandemic coronaviruses and to more effectively respond to SARS-CoV-2 variants. The emergence of Omicron and subvariants of SARS-CoV-2 illustrates the limitations of solely targeting the receptor-binding domain (RBD) of the spike (S) protein. Here, we isolated a large panel of broadly neutralizing antibodies (bnAbs) from SARS-CoV-2 recovered-vaccinated donors, which targets a conserved S2 region in the betacoronavirus spike fusion machinery. Select bnAbs showed broad in vivo protection against all three deadly betacoronaviruses, SARS-CoV-1, SARS-CoV-2, and MERS-CoV, which have spilled over into humans in the past two decades. Structural studies of these bnAbs delineated the molecular basis for their broad reactivity and revealed common antibody features targetable by broad vaccination strategies. These bnAbs provide new insights and opportunities for antibody-based interventions and for developing pan-betacoronavirus vaccines.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

A comparison of carbon impurities in pre- and post-melt uranium Part 1: Scanning electron microscopy analysis

Although C impurities in U have been studied for decades, fundamental questions regarding their incorporation, migration, and overall transformation during metal processing still exist. In two written Parts, we compare the chemical speciation, distribution, crystallography, and morphologies (size, shape, etc.) of carbon-containing impurities in U metal both before and after melting using high resolution analytical electron microscopy (AEM). This first Part demonstrates the variability of carbide inclusions in depleted U (DU) metal with respect to their chemical phases and morphologies as observed by scanning electron microscopy (SEM). Here, a variety of inclusion types, such as the pill-shaped U monocarbide (UC), previously only hypothesized, are summarized. Additionally, delineation between hopper-shaped U carbonitride U(C,N) and dendritic UC inclusions is discussed in relationship to archived literature.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CatTestHub: A benchmarking database of experimental heterogeneous catalysis for evaluating advanced materials

The ability to quantitatively compare newly evolving catalytic materials and technologies is hindered by the widespread availability of catalytic data collected in a consistent manner. While certain catalytic chemistries have been widely studied across decades of scientific research, quantitative comparisons based on literature information is hindered by variability in reaction conditions, types of reported data, and reporting procedures. Here, we present CatTestHub, an open-access database dedicated to benchmarking experimental heterogeneous catalysis data. Combining systematically reported catalytic activity data for selected probe chemistries, with relevant material characterization and reactor configuration information, the database provides a collection of catalytic benchmarks for distinct classes of active site functionality. Through key choices in data access, availability, and traceability, CatTestHub seeks to balance the fundamental information needs of chemical catalysis and the FAIR data design principles. Details of the database architecture and the means through which to navigate it are presented, highlighting examples of catalytic insights readily drawn from the available benchmarking data. In its current iteration, CatTestHub spans over 250 unique experimental data points, collected over 24 solid catalysts, that facilitated the turnover of 3 distinct catalytic chemistries. Here, a roadmap is presented through which to expand the open-access platform that serves as a community wide benchmark, primarily through continuous addition of kinetic information on select catalytic systems by members of the heterogeneous catalysis community at large.

Benchmark↗
DOE OSTI2022

Alkali-activated slag (AAS) and OPC-based composites containing crumb rubber aggregate: Physico-mechanical properties, durability and oxidation of rubber upon NaOH treatment

Value-added utilization of waste tires in cementitious materials has been studied for decades, whereas the synergy between rubber and alkali-activated cements deserves more investigations. To this end, we compared physico-mechanical and durability properties of alkali-activated slag (AAS) and OPC-based composites containing NaOH-pretreated/as-received crumb rubber (CR). It was found that the incorporation of CR had both positive and negative effects on specimens due to its special attributes. CR reduced electrical conductivity which was associated with the ion transport ability, since it worked as an electrical insulator and increased hydrophobicity of pore walls. The sulfate expansion decreased with CR content because the flow of sulfate ions was demobilized, and the flexibility of CR relieved the internal stress. CR also improved the freeze-thaw durability of composites if the total CR content was less than 30% in specimens. However, the low Young's modulus of CR impaired the compressive strength and failed to effectively control the total shrinkage upon drying. The composites with CR must avoid high temperature exposure which resulted in the pyrolysis of rubber. In addition, the NaOH pretreatment enhanced adhesion between CR and hydrated cement and improved overall performances of composites. The FTIR spectra confirmed the NaOH-induced accelerated oxidation of CR surface and the generation of polar functional groups including carbonyl and carboxyl groups, increasing the total surface energy of rubber. More importantly, the alkali-activation process for AAS could treat the CR aggregate in the meantime, which means the use of CR in alkali-activated cements does not require the pretreatment of CR before blending.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Beyond green with synthetic chlorophylls – Connecting structural features with spectral properties

The distinct features of chlorophylls in photosynthesis have led to the formation of numerous derivatives for applications encompassing solar energy conversion, molecular photonics, photodynamic therapy, and molecular imaging. Synthetic chlorins created de novo and bearing a geminal dimethyl group in the reduced ring have proved invaluable for fundamental studies. Four decades of research have led to accumulation of tabulated spectra for > 400 such synthetic chlorins with distinct structural frameworks (17-oxochlorins, 13 1 -oxophorbines, chlorinimides) and substituents (alkyl, aryl, ethynyl, phenylethynyl, acetyl, formyl) located at specific (meso, β) positions. In this review, spectral traces (324 absorption, 247 fluorescence) are assembled along with photophysical data including the molar absorption coefficient (ε), fluorescence quantum yield (Φ f ) and singlet excited-state lifetime (τ s ). The review uses the accumulated spectral data derived from chlorins all containing a uniform molecular scaffold to (1) highlight the effects of molecular structure on spectral features, and (2) identify trends including how ε, Φ f and τ s vary with wavelength and other features. Use of a common geminal-dimethyl-substituted chlorin scaffold – beginning with no substituents, to one substituent at designated sites, and to 2 or more substituents – provides a systematic Aufbau approach for understanding the absorption spectra of chlorins on a path to and beyond the native chlorophylls. Finally, the review provides insights concerning the rational design of potent analogues of Nature’s preeminent red-region absorbers for potential utilization in diverse applications and is aimed at multiple audiences: those interested in spectral properties, tetrapyrrole photophysics, and the molecular design of new chromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polyurethanes Based on Unmodified and Refined Technical Lignins: Correlation between Molecular Structure and Material Properties

The structural complexity and robust intermolecular interactions have challenged the incorporation of technical lignin into value-added polymeric materials for decades. To study the correlation between lignin molecular structure and material properties of lignin-based polyurethanes, we applied co-solvent enhanced lignocellulosic fractionation pretreatment followed by sequential precipitation to produce three distinct lignin preparations with narrowly distributed (molecular weight dispersity <2) and comparatively low molecular weight (<1500 g/mol) from poplar biomass. Structural characterization indicated that these lignin preparations differed in average molecular chain length and stiffness as well as hydroxyl group distribution. Secondary hydroxyl group providers such as aliphatic diols and polyethers were incorporated as building blocks into the lignin-based polyurethanes to provide additional hydrogen capacity to improve the dispersion of lignin in the polyurethane network. The selected aliphatic diols and polyethers interacted with lignin molecules at different levels of strength depending on their molecular structure, and their impacts were ultimately reflected in the mechanical and thermal properties of the resulting lignin-based polyurethanes. The copolymerization of technical lignin with tailored structure and secondary hydroxyl providers could provide new strategies in formulating lignin-based/containing polyurethanes for various functional applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exploring the Unusual Reactivity of the Hydrated Electron with CO 2

Many questions remain about the reactions of the hydrated electron despite decades of study. Of particular note is the fact that they do not appear to follow the Marcus theory of electron transfer reactions, a feature that has yet to be explained. To investigate these issues, we use ab initio molecular dynamics (AIMD) simulations to investigate a one of the better studied reactions, the hydrated electron reduction of CO 2 . The rate constant for the hydrated electron-CO 2 reaction complex to react to form CO 2 - is, for the first time, estimated from AIMD simulations. Results at 298 and 373 K show the rate constant is insensitive to temperature, consistent with the low measured activation energy for the reaction, and the implications of this behavior are examined. The sampling provided by the simulations yields insight into the reaction mechanism. The reaction is found to involve both solvent reorganization and changes in the carbon dioxide structure. The latter lead to significant vibrational excitation of the bending and symmetric stretch vibrations in the CO 2 - product, indicating the reaction is vibrationally nonadiabatic. The former is estimated from calculation of an approximate collective solvent coordinate and the free energy in this coordinate is determined. Furthermore, these results indicate that AIMD simulations can reasonably estimate hydrated electron reaction activation energies and provide new insight into the mechanism that can help illuminate the features of this unusual chemistry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Transition Metal Dichalcogenides as Effective Catalysts for High-Rate Lithium–Sulfur Batteries

In today’s renaissance of high energy density secondary batteries, lithium-sulfur (Li-S) batteries represent one of the most promising candidates for the next generation of renewable energy storage systems, due to sulfur’s high theoretical specific capacity of 1675 mAh g -1 and high earth abundance. However, despite decades of study, the issues associated with capacity fade via the polysulfide shuttle and sluggish kinetics remain. Through a rigorous and detailed electrochemical study of lithium polysulfides via rotating disk electrode voltammetry (RDE), we have investigated the kinetics of the redox reactions, and explored candidate catalysts to potentially overcome/mitigate the polysulfide shuttle effect. From these RDE studies, supported by comprehensive electronic-structure calculations of conversion-type surface reactions, we determined that WSe 2 can effectively catalyze the polysulfide redox reaction, though further studies are necessary to improve overall Li-S battery performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Machine-Learning-Guided Insights into Solid-Electrolyte Interphase Conductivity: Are Amorphous Lithium Fluorophosphates the Key?

Despite decades of study, the identity of the dominant Li + -conducting phase within the inorganic SEI of Li-ion batteries remains unresolved. While the mosaic model describes LiF/Li 2 O/Li 2 CO 3 nanocrystallites within a disordered matrix, these crystalline phases inherently offer limited ionic conductivity. Growing evidence suggests that interfaces, grain boundaries, and amorphous phases may instead host the primary fast-ion pathways. Using diffusion-based generative structure prediction and machine-learning interatomic potentials (MLIPs), we investigate lithium difluorophosphate (LiPO 2 F 2 ), a key mixed-anion decomposition product of phosphorus- and fluorine-containing electrolytes. We identify a stable crystalline polymorph and demonstrate that the amorphous counterpart is conductive, with projected room-temperature σ ≈ 0.18 mS cm –1 and E a ≈ 0.40 eV. Here, this enhancement stems from structural disorder flattening the Li site-energy landscape and a low formation energy for Li-interstitial defects, which supplies additional mobile carriers. We propose amorphous mixed-anion Li-P-O-F phases as a promising conducting medium in the SEI, offering a specific target for engineering improved battery interfaces.

Zhong, Peichen [University of California, Berkeley↗
DOE OSTI2020

An Artificial Z-Scheme Constructed from Dye-Sensitized Metal Oxide Nanosheets for Visible Light-Driven Overall Water Splitting

Sensitization of a wide-gap oxide semiconductor with a visible-light-absorbing dye has been studied for decades as a means of producing H 2 from water. However, efficient overall water splitting using a dye-sensitized oxide photocatalyst has remained an unmet challenge. Here in this paper we demonstrate visible-light-driven overall water splitting into H 2 and O 2 using HCa 2 Nb 3 O 10 nanosheets sensitized by a Ru(II) tris-diimine type photosensitizer, in combination with a WO 3 -based water oxidation photocatalyst and a triiodide/iodide redox couple. With the use of Pt-intercalated HCa 2 Nb 3 O 10 nanosheets further modified with amorphous Al 2 O 3 clusters as the H 2 evolution component, the dye-based turnover number and frequency for H 2 evolution reached 4580 and 1960 h –1 , respectively. The apparent quantum yield for overall water splitting using 420 nm light was 2.4%, by far the highest among dye- sensitized overall water splitting systems reported to date. The present work clearly shows that a carefully designed dye/oxide hybrid has great potential for photocatalytic H 2 production, and represents a significant leap forward in the development of solar-driven water splitting systems.

14 SOLAR ENERGY↗
DOE OSTI2024

Twenty Years of Progress, Challenges, and Opportunities in Measuring and Understanding Soil Respiration

Abstract Soil respiration (Rs), the soil‐to‐atmosphere flux of CO 2 , is a dominant but uncertain part of the carbon cycle, even after decades of study. This review focuses on progress in understanding Rs from laboratory incubations to global estimates. We survey key developments of in situ ecosystem‐scale Rs observations and manipulations, synthesize Rs meta‐analyses and global flux estimates, and discuss the most compelling challenges and opportunities for the future. Increasingly sophisticated lab experiments have yielded insights into the interaction among heterotrophic respiration, substrate supply, and enzymatic kinetics, and extended incubation‐based analyses across space and time. Observational and manipulative field‐based experiments have used improved measurement approaches to deepen our understanding of the integrated effects of environmental change and disturbance on Rs. Freely‐available observational databases have enabled meta‐analyses and studies probing the magnitude of, and constraints on, the global Rs flux. Key challenges for the field include expanding Rs measurements, experiments, and opportunities to under‐represented communities and ecosystems; reconciling independent estimates of global respiration fluxes and trends; testing and leveraging the power of machine learning and process‐based models, both independently and in conjunction with each other; and continuing the field's tradition of using novel experiments to explore diverse mechanisms and ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A Panspermia Origin for Venus Cloud Life

Decades of study have hinted at the astrobiological potential of Venus's cloud layers. This potential is often cast as stemming from the idea that the Venusian surface was clement in the past. As the climate changed, life then remained in, or perhaps evolved and migrated to, the last habitable niche: the altitudes above ∼50 km with Earth-like temperatures and pressures today. Here we explore an alternative scenario where life was delivered to Venus' clouds from Earth or Mars (“panspermia”). This process requires a life-containing bolide to enter the atmosphere, without experiencing complete sterilization, and then be dispersed at high altitude in fragments small enough to dwell in the clouds. We adapt a widely used model of bolide-atmosphere interaction to investigate the fate of bolides delivered to Venus from Earth and Mars. Starting at the top of the atmosphere, bolides ablate and fragment. Aerodynamic drag spreads these fragments horizontally, forming a “pancake” with an increased effective cross-section, causing rapid deceleration. An airburst occurs when the bolide deposits its highest amount of kinetic energy in the atmosphere. Observations of terrestrial meteorites provide a scaling law for the distribution of post-airburst fragment sizes. Inspired by the “Venus Life Equation,” we present a framework for calculating the rate at which panspermia delivers microbial life to the clouds of Venus. Our best estimate is an average of ∼100 cells dispersed in the clouds per Earth-year. Whether this life can survive and thrive in its new home remains an open question.

Guinan, Emma [Arizona State Univ., Tempe, AZ (Unit↗
DOE OSTI2020

High frequency atomic tunneling yields ultralow and glass-like thermal conductivity in chalcogenide single crystals

Crystalline solids exhibiting glass-like thermal conductivity have attracted substantial attention both for fundamental interest and applications such as thermoelectrics. In most crystals, the competition of phonon scattering by anharmonic interactions and crystalline imperfections leads to a non-monotonic trend of thermal conductivity with temperature. Defect-free crystals that exhibit the glassy trend of low thermal conductivity with a monotonic increase with temperature are desirable because they are intrinsically thermally insulating while retaining useful properties of perfect crystals. However, this behavior is rare, and its microscopic origin remains unclear. Here, we report the observation of ultralow and glass-like thermal conductivity in a hexagonal perovskite chalcogenide single crystal, BaTiS 3 , despite its highly symmetric and simple primitive cell. Elastic and inelastic scattering measurements reveal the quantum mechanical origin of this unusual trend. A two-level atomic tunneling system exists in a shallow double-well potential of the Ti atom and is of sufficiently high frequency to scatter heat-carrying phonons up to room temperature. While atomic tunneling has been invoked to explain the low-temperature thermal conductivity of solids for decades, our study establishes the presence of sub-THz frequency tunneling systems even in high-quality, electrically insulating single crystals, leading to anomalous transport properties well above cryogenic temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic structure of active sites in ceria-supported Pt catalysts for the water gas shift reaction

Oxide-supported noble metal catalysts have been extensively studied for decades for the water gas shift (WGS) reaction, a catalytic transformation central to a host of large volume processes that variously utilize or produce hydrogen. There remains considerable uncertainty as to how the specific features of the active metal-support interfacial bonding—perhaps most importantly the temporal dynamic changes occurring therein—serve to enable high activity and selectivity. Here we report the dynamic characteristics of a Pt/CeO 2 system at the atomic level for the WGS reaction and specifically reveal the synergistic effects of metal-support bonding at the perimeter region. We find that the perimeter Pt 0 -O vacancy -Ce 3+ sites are formed in the active structure, transformed at working temperatures and their appearance regulates the adsorbate behaviors. We find that the dynamic nature of this site is a key mechanistic step for the WGS reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Revealing the relationship between liquid fragility and medium-range order in silicate glasses

Despite decades of studies, the nature of the glass transition remains elusive. In particular, the sharpness of the dynamical arrest of a melt at the glass transition is captured by its fragility. Here, we reveal that fragility is governed by the medium-range order structure. Based on neutron-diffraction data for a series of aluminosilicate glasses, we propose a measurable structural parameter that features a strong inverse correlation with fragility, namely, the average medium-range distance (MRD). We use in-situ high-temperature neutron-scattering data to discuss the physical origin of this correlation. We argue that glasses exhibiting low MRD values present an excess of small network rings. Such rings are unstable and deform more readily with changes in temperature, which tends to increase fragility. These results reveal that the sharpness of the dynamical arrest experienced by a silicate glass at the glass transition is surprisingly encoded into the stability of rings in its network.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Vegetation biogeography is a main source of uncertainty in modelling the land carbon cycle

The terrestrial biosphere exchanges a large amount of CO 2 with the atmosphere through photosynthesis and respiration, determining the magnitude of land carbon sink and consequently influencing the rate of global warming. The magnitudes of global photosynthesis and respiration, however, vary widely across models (100-200 PgC/year), constituting a key and persistent source of uncertainty in carbon cycle and climate modelling. Here, we argue that the uncertainty in the land carbon cycle modelling is largely attributable to the uncertainty in biogeography – the distribution of plant functional types (PFTs). Using an ensemble of dynamic global vegetation models (DGVMs), we find a strong dependence of total photosynthesis on total area for each PFT. The dependence allows us to reduce the spread of land carbon cycle estimates by ~75% using remote sensing-based PFT maps. We further find that 56 ± 21% of climate-driven changes in global photosynthesis modelled by DGVMs are caused by changes in PFT distribution in the last two decades. Our study identifies vegetation biogeography as a main controlling factor of uncertainty in land carbon cycle modelling and highlights the importance of biogeography-climate interactions in carbon cycle and climate studies.

Zhao, Ruiying [National Univ. of Singapore (Singap↗