Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct liquid extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Radiochemical Separation and Quantification of Tritium in Metallic Radwastes Generated from CANDU Type NPP - 13279

As a destructive quantification method of {sup 3}H in low and intermediate level radwastes, bomb oxidation, sample oxidation, and wet oxidation methods have been introduced. These methods have some merits and demerits in the radiochemical separation of {sup 3}H radionuclides. That is, since the bomb oxidation and sample oxidation methods are techniques using heating at high temperature, the separation methods of the radionuclides are relatively simple. However, since {sup 3}H radionuclide has a property of being diffused deeply into the inside of metals, {sup 3}H which is distributed on the surface of the metals can only be extracted if the methods are applied. As an another separation method, the wet oxidation method makes {sup 3}H oxidized with an acidic solution, and extracted completely to an oxidized HTO compound. However, incomplete oxidized {sup 3}H compounds, which are produced by reactions of acidic solutions and metallic radwastes, can be released into the air. Thus, in this study, a wet oxidation method to extract and quantify the {sup 3}H radionuclide from metallic radwastes was established. In particular, a complete extraction method and complete oxidation method of incomplete chemical compounds of {sup 3}H using a Pt catalyst were studied. The radioactivity of {sup 3}H in metallic radwastes is extracted and measured using a wet oxidation method and liquid scintillation counter. Considering the surface dose rate of the sample, the appropriate size of the sample was determined and weighed, and a mixture of oxidants was added to a 200 ml round flask with 3 tubes. The flask was quickly connected to the distilling apparatus. 20 mL of 16 wt% H{sub 2}SO{sub 4} was given into the 200-ml round flask through a dropping funnel while under stirring and refluxing. After dropping, the temperature of the mixture was raised to 96 deg. C and the sample was leached and oxidized by refluxing for 3 hours. At that time, the incomplete oxidized {sup 3}H compounds were completely oxidized using the Pt catalysts and produced a stable HTO compound. After that, about a 20 ml solution was distilled in the separation apparatus, and the distillate was mixed with an ultimagold LLT as a cocktail solution. The solution in the vial was left standing for at least 24 hours. The radioactivity of {sup 3}H was counted directly using a liquid scintillation analyzer (Packard, 2500 TR/AB, Alpha and Beta Liquid Scintillation Analyzer). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Selective One-Dimensional 13 C– 13 C Spin-Diffusion Solid-State Nuclear Magnetic Resonance Methods to Probe Spatial Arrangements in Biopolymers Including Plant Cell Walls, Peptides, and Spider Silk

Two-dimensional (2D) and 3D through-space 13 C– 13 C homonuclear spin-diffusion techniques are powerful solid-state nuclear magnetic resonance (NMR) tools for extracting structural information from 13 C-enriched biomolecules, but necessarily long acquisition times restrict their applications. In this work, we explore the broad utility and underutilized power of a chemical shift-selective one-dimensional (1D) version of a 2D 13 C– 13 C spin-diffusion solid-state NMR technique. The method, which is called 1D dipolar-assisted rotational resonance (DARR) difference, is applied to a variety of biomaterials including lignocellulosic plant cell walls, microcrystalline peptide fMLF, and black widow dragline spider silk. 1D 13 C– 13 C spin-diffusion methods described here apply in select cases in which the 1D 13 C solid-state NMR spectrum displays chemical shift-resolved moieties. Furthermore, this is analogous to the selective 1D nuclear Overhauser effect spectroscopy (NOESY) experiment utilized in liquid-state NMR as a faster (1D instead of 2D) and often less ambiguous (direct sampling of the time domain data, coupled with increased signal averaging) alternative to 2D NOESY. Selective 1D 13 C– 13 C spin-diffusion methods are more time-efficient than their 2D counterparts such as proton-driven spin diffusion (PDSD) and dipolar-assisted rotational resonance. The additional time gained enables measurements of 13 C– 13 C spin-diffusion buildup curves and extraction of spin-diffusion time constants TSD, yielding detailed structural information. Specifically, selective 1D DARR difference buildup curves applied to 13 C-enriched hybrid poplar woody stems confirm strong spatial interaction between lignin and acetylated xylan polymers within poplar plant secondary cell walls, and an interpolymer distance of ~0.45–0.5 nm was estimated. Additionally, Tyr/Gly long-range correlations were observed on isotopically enriched black widow spider dragline silks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Microbial Gas Generation Under Expected Waste Isolation Pilot Plant Repository Conditions: Final Report

Gas generation from the microbial degradation of the organic constituents of transuranic (TRU) waste under conditions expected in the Waste Isolation Pilot Plant (WIPP) was investigated. The biodegradation of mixed cellulosic materials and electron-beam irradiated plastic and rubber materials (polyethylene, polyvinylchloride, hypalon, leaded hypalon, and neoprene) was examined. We evaluated the effects of environmental variables such as initial atmosphere (air or nitrogen), water content (humid ({approx}70% relative humidity, RH) and brine inundated), and nutrient amendments (nitogen phosphate, yeast extract, and excess nitrate) on microbial gas generation. Total gas production was determined by pressure measurement and carbon dioxide (CO{sub 2}) and methane (CH{sub 4}) were analyzed by gas chromatography; cellulose degradation products in solution were analyzed by high-performance liquid chromatography. Microbial populations in the samples were determined by direct microscopy and molecular analysis. The results of this work are summarized.

03 NATURAL GAS↗
DOE OSTI2023

Thermal Extraction Modeling within HYBRID: Nominal and Extraction Conditions in Advanced Reactor Systems

This document details continuing development of thermal extraction modeling within the HYBRID repository, the modeling repository of the Integrated Energy Systems program at Idaho National Laboratory. The focus of the thermal extraction work is setting up template energy conversion systems for advanced reactor systems. Based on these nominal conditions, the IES team is developing extraction capability maps that present the system thermal-to-electric efficiency of the remaining system and the mass extraction fraction capability of these systems when extracting steam at various pressures to send steam to applications at a lower given pressure. These curves are mapped on what has become termed “whale chart” due to the appearance of the results. Multiple advanced reactor systems are complete, and it is anticipated that all four of the main advanced reactor types: advanced light-water reactors, high temperature gas reactors, liquid metal fast reactors, and molten salt reactors, will be complete by the end of the fiscal year.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

A structural underpinning of the lower critical solution temperature (LCST) behavior behind temperature-switchable liquids

In this work, we use state-of-the-art X-ray scattering and molecular dynamics to analyze amine-water mixtures that show the unusual lower critical solution temperature (LCST) behavior. The goal is to provide direct experimental evidence for the entropy-lowering molecular cluster formation hypothesized as necessary for LCST behavior. Differential wide-angle X-ray scattering and pair distribution analysis and small-angle X-ray scattering measurements were combined with molecular modeling and liquid-liquid equilibrium measurements, revealing direct experimental evidence for the hypothesis. However, the response of the amine phase to accommodating water is even more subtle than the simple hypothesis suggests, with the formation of robust nanoscale reverse micelles. The techniques developed in this paper can be expected to yield insights in the use of temperature-switchable liquids in solvent extraction and other separations, and the stabilization of organelles in living cells that do not have physical membranes but do require compositional gradients to operate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental Demonstration of Alkalinity Concentration Swing for Direct Air Capture of CO 2

This work constitutes the first lab-scale experimental demonstration of the alkalinity concentration swing (ACS) for direct air capture (DAC) of CO 2 . ACS can be implemented by taking a dilute alkaline solution that has contacted ambient air, and then concentrating it using commercially available desalination technologies. The more concentrated solution has a higher partial pressure of CO 2 relative to the initial solution, allowing the CO 2 to be separated and stored. The ACS approach is based on simple thermodynamics but had never been verified experimentally in terms of extracting CO 2 from air until now. We tested two distinct methods for concentrating the alkaline liquid: reverse osmosis (RO) and capacitive deionization (CDI). We found that to complete the DAC cycle in feasible operating conditions, a bicarbonate-enrichment step needed to be introduced, which selects on bicarbonate ions over carbonate ions. Two approaches for CO 2 extraction to measure the CO 2 yield per amount of water processed by the ACS method were tested. The energy required per amount of CO 2 captured was quantified. We further applied an energy model to study how operating the ACS cycle under different conditions would affect energy requirements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

DarkSide: Latest results and future perspectives

DarkSide is direct-detection dark-matter experimental project based on radiopure argon. The main goal of the DarkSide program is the detection of rare nuclear elastic collisions with hypothetical dark-matter particles. The present detector, DarkSide-50, placed at Laboratori Nazionali del Gran Sasso (LNGS), is a dualphase time projection chamber (TPC) filled with ultra-pure liquid argon, extracted from underground sources. Surrounding the TPC to suppress the background there are neutron and muon active vetoes. One of argon key features is the capability to distinguish between electron and nuclear recoils, exploiting the different shapes of the signals. DarkSide-50 new results, obtained using a live-days exposure of 532.4 days, are presented. This analysis sets a 90% C.L. upper limit on the dark matter-nucleon spin-independent cross-section of 1.1 × 10 -44 cm 2 for a WIMP mass of 100 GeV/c 2 . The next phase of the project, DarkSide-20k, will be a new detector with a fiducial mass of ~ 20 tons, equipped with cryogenic silicon photomultipliers (SiPM).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Molecular Characterization of Organosulfates in Organic Aerosols from Shanghai and Los Angeles Urban Areas by Nanospray-Desorption Electrospray Ionization High-Resolution Mass Spectrometry

Aerosol samples collected in the urban areas of Shanghai and Los Angeles were analyzed by nanospray-desorption electrospray ionization mass spectrometry (nano-DESI MS) with high mass resolution (m/Δm=100,000). Solvent mixtures of acetonitrile/water and acetonitrile/toluene were used to extract and ionize polar and non-polar compounds, respectively. A diverse mixture of oxygenated hydrocarbons, organosulfates, organonitrates, and organics with reduced nitrogen were detected in the Los Angeles sample. Majority of the organics in the Shanghai sample were detected as organosulfates. The dominant organosulfates in the two samples have distinctly different molecular characteristics. Specifically, organosulfates in the Los Angeles sample were dominated by isoprene- or monoterpene-derived products, while organosulfates of yet unknown origin in the Shanghai sample had distinctive characteristics of long aliphatic carbon chains and low degree of oxidation and unsaturation. The use of acetonitrile/toluene solvent facilitated identification of this type of organosulfates, suggesting they could be missed in previous studies relying on sample extraction using common polar solvents. The high molecular weight and low degree of unsaturation and oxidization of the organosulfates detected in the Shanghai sample suggest that they may act as surfactants, and plausibly affect the surface tension and hygroscopicity of the atmospheric particulate matter. We propose that direct esterification of carbonyl or hydroxyl compounds by sulfates or sulfuric acid in liquid phase could be the formation pathway of these special organosulfates. Finally, long-chain alkanes from vehicle emissions might be their precursors.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2022

Complete Initial Evaluation of Novel Complexants for Tc Holdback for Simplified Single Cycle Separations.

Management of technetium at the back end of nuclear fuel cycle is complicated by its unique physico-chemical character, but must be addressed to due to the environmental, storage and reprocessing challenges of this fission product. In a single-cycle scenario, the recovery and purification of uranium is particularly challenging due to the tendency of a pertechnetate anion to follow uranyl cation. This report summarizes initial studies directed towards finding the solution for technetium management. Two options for controlling technetium’s chemistry in solvent extraction scenarios were studied. Molecular recognition of pertechnetate by aqueous complexants based on guanidinium moieties was compared to redox manipulation of technetium using dihydrazide reagents. Solvent extraction, potentiometric and nuclear magnetic resonance spectroscopy studies were performed. The influence of guanidinium reagents on the liquid-liquid partitioning of technetium is less pronounced, relative to dihydrazides. Strong impact exerted by dihydrazides originates from the technetium-catalyzed decomposition of such compounds which reduces technetium to a tetravalent, non-extractable state. Although this route of technetium management is very effective the destruction of dihydrazides is undesirable. Guanidinium complexants show a more tempered influence on technetium. The effect on the liquid-liquid partitioning of pertechnetate is evident and likely guided by anion recognition due to ion-pair and hydrogen bond formation. Guanidiniums are stable in presence of technetium as evidenced by nuclear magnetic resonance studies. The steady state chemistry of guanidiniums identify this class of aqueous complexants as solid candidates for structure-function pertechnetate recognition studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

Investigations of Bubbly Flows using Direct Numerical Simulations

Direct numerical simulations are used to examine the behavior of relatively high void fraction bubbly flows. The full Navier-Stokes equations are solved for both the bubbles and the ambient liquid and the flow near the moving and deforming phase boundaries is resolved fully. This yields detailed data for the evolution of the system that can be used to extract information about the basic bubble-bubble and bubble-flow interactions as well as about the averaged properties of the system. Such information are critical for the generation of averaged engineering models of industrial size systems as well as for novel applications of bubbly flows where experiments are difficult. The project has yielded detailed information about many aspects of bubbly flows. The results for flows in vertical channels are particularly significant and have yielded an essentially complete understanding of many aspects of the flows. The important insight is that the flow has a particularly simple structure, consisting of a homogeneous core in hydrostatic balance and a wall layer whose composition depends of whether the liquid is flowing upward or downward. These results hold for both laminar and turbulent flows and have allowed us to derive an analytical model to predict the flow. We have also shown that bubble deformability results in a completely different flow structure, but also giving rise to relatively simple predictive models. Preliminary studies of transient migration of a non-homogeneous bubble distribution and coalescence induced flow regime transitions in vertical channels were also done.

42 ENGINEERING↗
DOE OSTI2026

SAM Code Enhancements for Fission Product Tracking of Noble Gases and Metals in MSRs

This report documents fiscal year 2026 enhancements to the System Analysis Module (SAM) for modeling fission product transport in liquid-fueled molten salt reactors (MSRs). The work advances three principal areas: noble gas transport, noble metal deposition, and user interface improvements. The noble gas transport capability integrates drift-flux gas transport, Henry’s law two-film interphase mass transfer with pressure-based nucleation suppression, Knudsen-regime pore diffusion into porous graphite with a conjugate salt-graphite interface constraint, built-in material properties, five Sherwood-number mass transfer correlations including three derived from high-fidelity NekRS simulations, and xenon-135 reactivity feedback through SAM’s point-kinetics model. This work also presents a comprehensive verification test suite, including new analytically verified cases for pressure-dependent onset of interphase gas transfer in a stagnant vertical pipe, a postulated FLiBe-graphite Xe extraction permeator, a gravity riser with a fission-product source, and a descending pipe with gas redissolution driven by hydrostatic pressure. A machine learning framework for bubble rise velocity prediction in molten salt systems is developed and benchmarked on molten-salt and diverse aqueous bubble datasets. The best-performing fine-tuned transfer-learning networks achieve an 82% reduction in RMSE relative to the Clift correlation, and is implemented directly in SAM. The noble metal transport capability is developed, including a liquid-wall deposition model and a gas-surface flotation mechanism that transfers insoluble particles entrained by sparging gas to wetted structures. Verification tests and demonstration cases cover the surface deposition, flotation efflux, and flotation shedding. Finally, a new [SpeciesTransport] input structure replaces positional global vectors with selfcontained, order-independent, named species blocks, simplifies the specification of multiphase species and decay chains, and remains fully compatible with existing SAM input files. Together, these developments improve the physical fidelity, verification basis, and usability of SAM for system-level analyses of fissionproduct behavior in MSRs.

Mui, Travis (ORCID:0000000303736470)↗
DOE OSTI2022

Determination of Molecular Structure and Dynamics of Molten Salts by Advanced Neutron and X-ray Scattering Measurements and Computer Modeling

The design and development of fully functional Molten-Salt Reactors (MSR) require detailed knowledge of the molten salt properties in order to understand and predict the salt’s behavior. Fundamental properties of interest include molecular structure, speciation, and dynamics (such as diffusion coefficients) of salt components and dissolved corrosion and fission products. Computer modeling is necessary to predict changes in physical and chemical properties due to irradiation, burning of dissolved fuel, and corrosion. The modeling requires experimental data, and advanced neutron and x-ray scattering and spectroscopy provide the most reliable and direct determination of the structure (Pair-Distribution Functions, PDF), and dynamics of ions in the melt. This project dealt with both fluoride and chloride salts. The PDFs have been measured by a combination of neutron and x-ray diffraction. We utilized the techniques of isotope substitutions, a very powerful tool available for neutron-scattering, to extract the details of the liquid structure. Although similar measurements have been done before, modern advanced neutron and x-ray-scattering techniques allow collecting the data at much higher resolution and in a wider range of temperatures. Importantly, we were among the first to study fluoride salts by neutron scattering. The importance of impurities and their effects on salt properties have become apparent recently and so new methods of salt purification were developed. We took advantage of these developments to produce reliable data, which have been used for computer simulations of both clean salts and those with added fission and corrosion products most relevant for MSRs. Ab initio molecular dynamics simulations have been performed to understand the multi-component liquid solution, in particular solubility of impurities and thermodynamic interactions in relation to the ionic-cluster structure of the fluid. We applied machine learning to regress from the simulation and experimental data in order to develop a fast-acting model that can handle molten salt with an arbitrary (≥ 10) number of chemical elements and be able to predict chemical potential as a function of composition and temperature. This project resulted in a number of experimental and computer-simulation publications, a patent application, and numerous conference presentations (American Physical Society, American Chemical Society, and The Electrochemical Society among others). Multiple students and postdocs participated and collaborated on aspects of this project. This project seeded new collaborations between MIT and other institutions, such as the University of Massachusetts Lowell, the University of Illinois Urbana-Champaign, the University of California Berkeley, and Oak Ridge and Los Alamos National Labs. As such, this project has had a broad and lasting impact beyond its original scientific scope.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Mild oxidation of methane to methanol or acetic acid on supported isolated rhodium catalysts

An efficient and direct method of catalytic conversion of methane to liquid methanol and other oxygenates would be of considerable practical value. However, it remains an unsolved problem in catalysis, as typically it involves expensive or corrosive oxidants or reaction media(5-8) that are not amenable to commercialization. Although methane can be directly converted to methanol using molecular oxygen under mild conditions in the gas phase, the process is either stoichiometric (and therefore requires a water extraction step) or is too slow and low-yielding to be practical. Methane could, in principle, also be transformed through direct oxidative carbonylation to acetic acid, which is commercially obtained through methane steam reforming, methanol synthesis, and subsequent methanol carbonylation on homogeneous catalysts. However, an effective catalyst for the direct carbonylation of methane to acetic acid, which might enable the economical small-scale utilization of natural gas that is currently flared or stranded, has not yet been reported. Here we show that mononuclear rhodium species, anchored on a zeolite or titanium dioxide support suspended in aqueous solution, catalyse the direct conversion of methane to methanol and acetic acid, using oxygen and carbon monoxide under mild conditions. Here, we find that the two products form through independent pathways, which allows us to tune the conversion: three-hour-long batch-reactor tests conducted at 150 degrees Celsius, using either the zeolitesupported or the titanium-dioxide-supported catalyst, yield around 22,000 micromoles of acetic acid per gram of catalyst, or around 230 micromoles of methanol per gram of catalyst, respectively, with selectivities of 60-100 per cent. Finally, we anticipate that these unusually high activities, despite still being too low for commercial application, may guide the development of optimized catalysts and practical processes for the direct conversion of methane to methanol, acetic acid and other useful chemicals.

09 BIOMASS FUELS↗
DOE OSTI2018

Percolative nature of the direct-current paraconductivity in cuprate superconductors

Abstract Despite extraordinary scientific efforts over the past three decades, the cuprate high-temperature superconductors continue to pose formidable challenges. A pivotal problem, essential for understanding both the normal and superconducting states, is to clarify the nature of the superconducting pre-pairing above the bulk transition temperature T c . Different experimental probes have given conflicting results, in part due to difficulties in discerning the superconducting response from the complex normal-state behavior. Moreover, it has proven challenging to separate common properties of the cuprates from compound-specific idiosyncrasies. Here we investigate the paraconductivity—the superconducting contribution to the direct-current (dc) conductivity—of the simple-tetragonal model cuprate material HgBa 2 CuO 4+ δ . We are able to separate the superconducting and normal-state responses by taking advantage of the Fermi-liquid nature of the normal state in underdoped HgBa 2 CuO 4+ δ ; the robust and simple quadratic temperature-dependence of the normal-state resistivity enables us to extract the paraconductivity above the macroscopic T c with great accuracy. We find that the paraconductivity exhibits unusual exponential temperature dependence, and that it can be quantitatively explained by a simple superconducting percolation model. Consequently, the emergence of superconductivity in this model system is dominated by the underlying intrinsic gap inhomogeneity. Motivated by these insights, we reanalyze published results for two other cuprates and find exponential behavior as well, with nearly the same characteristic temperature scale. The universal intrinsic gap inhomogeneity is not only essential for understanding the supercoducting precursor, but will also have to be taken into account in the analysis of other bulk measurements of the cuprates.

Popčević, Petar↗
DOE OSTI2012

Biosystems Design. Report from the July 2011 Workshop

Growing energy demand cannot be met by nonrenewable fossil fuels. Consequently, alternative energy sources are being intensively pursued. Cellulose, a very stable carbohydrate that makes up plant cell walls, is a potential source of renewable fuels. Transforming cellulose into liquid fuels, however, requires substantial chemical and biological processing, first to extract the sugars that comprise the cellulose and then to convert those sugars into fuels. These requirements pose major hurdles to sustainable biofuels production, but overcoming them may be possible by engineering new plants that facilitate the extraction and conversion of their cell walls into liquid fuels. Similarly, newly designed microbes capable of metabolizing plant cell wall components can simplify biomass processing for fuel conversion. Other microorganisms such as microalgae and cyanobacteria can be redesigned to incorporate new functionalities. For example, these photosynthetic organisms, which capture light and convert it into chemical energy, can be re-engineered to produce biofuels, including biodiesel, directly from sunlight. Technological advances enabling the design of new biological systems are already moving biofuels closer to becoming viable, alternative renewable energy resources. Further advances are necessary for developing useful bioenergy crops that not only allow facile conversion of biomass into biofuels, but also do not compete with food crops for arable land. In other words, crops must be rationally redesigned to produce high biomass yields on marginal agricultural lands and under changing weather conditions.

09 BIOMASS FUELS↗
NASA NTRS1996

Forced Oscillations of Supported Drops

Oscillations of supported liquid drops are the subject of wide scientific interest, with applications in areas as diverse as liquid-liquid extraction, synthesis of ceramic powders, growing of pure crystals in low gravity, and measurement of dynamic surface tension. In this research, axisymmetric forced oscillations of arbitrary amplitude of viscous liquid drops of fixed volume which are pendant from or sessile on a rod with a fixed or moving contact line and surrounded by an inviscid ambient gas are induced by moving the rod in the vertical direction sinusiodally in time. In this paper, a preliminary report is made on the computational analysis of the oscillations of supported drops that have 'clean' interfaces and whose contact lines remain fixed throughout their motions. The relative importance of forcing to damping can be increased by either increasing the amplitude of rod motion A or Reynolds number Re. It is shown that as the ratio of forcing to damping rises, for drops starting from an initial rest state a sharp increase in deformation can occur when they are forced to oscillate in the vicinity of their resonance frequencies, indicating the incipience of hysteresis. However, it is also shown that the existence of a second stable limit cycle and the occurrence of hysteresis can be observed if the drop is subjected to a so-called frequency sweep, where the forcing frequency is first increased and then decreased over a suitable range. Because the change in drop deformation response is abrupt in the vicinity of the forcing frequencies where hysteresis occurs, it should be possible to exploit the phenomenon to accurately measure the viscosity and surface tension of the drop liquid.

Wilkes, Edward D.↗
DOE OSTI2026

Tracking Thermal Transport in Colloidal Quantum Dot Films Using in Situ Time-Resolved X-ray Diffraction

Colloidal quantum dots (QDs) and their thin films are increasingly used in electronic and photonic devices replacing traditional bulk semiconductors. However, thermal properties of QDs remain underexplored relative to device development efforts. This study shows the use of time-resolved X-ray diffraction as a contact-free method to probe the thermal response of QDs in environments representative of the active layer in QD optoelectronic devices, providing in situ insights for future thermal management strategies. Through the extraction of Debye–Waller factors on a subnanosecond time scale, we directly capture the heating and cooling of core/shell CdSe/CdS QDs following pulsed optical excitation. In a QD thin film that actively provides optical gain, the thermal conductivity is found to be as low as 0.13 W m –1 K –1 , because of the poor heat flow between close-packed QD solids. For QDs dispersed in liquids, interfacial thermal conductance dominates thermal relaxation, with a conductance of 15 MW m –2 K –1 .

36 MATERIALS SCIENCE↗