Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Three-dimensional direct numerical simulation of a turbulent lifted hydrogen jet flame in heated coflow: flame stabilization and structure

Direct numerical simulation (DNS) of the near field of a three-dimensional spatially developing turbulent lifted hydrogen jet flame in heated coflow is performed with a detailed mechanism to determine the stabilization mechanism and the flame structure. The DNS was performed at a jet Reynolds number of 11,000 with over 940 million grid points. The results show that auto-ignition in a fuel-lean mixture at the flame base is the main source of stabilization of the lifted jet flame. A chemical flux analysis shows the occurrence of near-isothermal chemical chain branching preceding thermal runaway upstream of the stabilization point, indicative of hydrogen auto-ignition in the second limit. The Damköhler number and key intermediate-species behaviour near the leading edge of the lifted flame also verify that auto-ignition occurs at the flame base. At the lifted-flame base, it is found that heat release occurs predominantly through ignition in which the gradients of reactants are opposed. Downstream of the flame base, both rich-premixed and non-premixed flames develop and coexist with auto-ignition. In addition to auto-ignition, Lagrangian tracking of the flame base reveals the passage of large-scale flow structures and their correlation with the fluctuations of the flame base. In particular, the relative position of the flame base and the coherent flow structure induces a cyclic motion of the flame base in the transverse and axial directions about a mean lift-off height. This is confirmed by Lagrangian tracking of key scalars, heat release rate and velocity at the stabilization point.

Mechanics↗

Direct Numerical Simulation Database of High-Speed Flow over Parameterized Curved Walls

This study presents a direct numerical simulation (DNS) database of high-speed turbulent boundary layers (TBLs) subject to pressure gradients due to parametrically varied backward-facing and forward-facing wall curvatures, with an inflow Mach number of 4.9 and a friction Reynolds number of [Formula: see text] immediately before the onset of wall curvature. The Mach and Reynolds numbers are significantly higher than those reported in the literature for the DNS of pressure-gradient TBLs. The flow conditions and baseline wall geometries are representative of experiments in the high-speed blowdown wind tunnel at the National Aerothermochemistry Laboratory at Texas A&M University. The wall steepness of the baseline geometry for both the backward-facing and forward-facing walls was systematically varied to cause attached, incipiently separated, and fully separated flows. Precomputed flow statistics, including turbulent kinetic energy budgets, are available on the website of the Turbulence Modeling Resource of the NASA Langley Research Center, allowing other investigators to query any property of interest.

Engineering↗

Active turbulence control in wallbounded flow using direct numerical simulations

An exploratory study of concepts for active control of turbulent boundary layers using the direct numerical simulation technique was performed. Significant drag reduction was achieved when the surface boundary condition was modified such that it could suppress the large-scale structures present in the wall region. This was achieved by prescribing the normal component of velocity at the wall to be 180 deg out of phase with the normal velocity slightly above the wall at each instant. The drag reduction was accompanied with significant reduction in the intensity of the wall-layer structures and reductions in the magnitude of Reynolds stresses throughout the flow. Suitability of wall-pressure and shear-stress fluctuations for detection of flow structures above the wall was examined. A preliminary result obtained by applying the present control strategy to a transitional flow is also briefly described, from which one can infer a possible linkage between the control strategy and flow stability.

Kim, J.↗

Direct Numerical Simulations of Turbulent Flow Interactions with Strong Shocks Using Shock-Fitting Method

Canonical problem of interaction of a normal shock and isotropic turbulence is fundamental to many important scientific and engineering applications. Most widely used shock capturing methods for the numerical simulation of compressible flows are inherently dissipative, only first order accurate and may incur numerical oscillations near the shock waves. Since high order methods are critical for direct numerical simulation of turbulent flows, we use a shock-fitting method that has been shown to be fifth-order accurate near as well as away from the shock. Moreover, unlike shock-capturing schemes, there are no spurious oscillations even with very strong shock waves. We carry out Direct Numerical Simulation (DNS) of canonical shock-turbulence interaction problem for flows with mean Mach numbers ranging from 2 to 20 and turbulent Mach number varying from 0.12 to 0.38. A Reynolds number based on Taylor microscale, ReO , of up to 40 is used, requiring more than 30 million grid points per simulation. Such high mean Mach number values have never been considered in past for study of shock turbulence interactions. Some new trends are observed in turbulent statistics as mean Mach number is increased. Maximum value of streamwise velocity fluctuations downstream of the shock is found to be initially decreasing as Mach number is increased but for stronger than Mach 8 shocks this trend reverses. Similarly maximum streamwise vorticity fluctuations in post-shock flow first increase and then decrease as mean Mach number is increased. We observe that vorticity fluctuations return to isotropy behind the shock for some cases. Increasing mean Mach number and Reynolds number leads to delay in the return to isotropy in the vorticity fluctuations. Overall, the results generally confirm the findings by earlier numerical simulations and provide new trends for stronger shocks than those considered by numerical studies in the past.

Rawat, Pradeep↗

Characterisation of two-stage ignition in diesel engine-relevant thermochemical conditions using direct numerical simulation

With the goal of providing a more detailed fundamental understanding of ignition processes in diesel engines, this study reports analysis of a direct numerical simulation (DNS) database. In the DNS, a pseudo turbulent mixing layer of dimethyl ether (DME) at 400 K and air at 900 K is simulated at a pressure of 40 atmospheres. At these conditions, DME exhibits a two-stage ignition and resides within the negative temperature coefficient (NTC) regime of ignition delay times, similar to diesel fuel. The analysis reveals a complex ignition process with several novel features. Autoignition occurs as a distributed, two-stage event. The high-temperature stage of ignition establishes edge flames that have a hybrid premixed/autoignition flame structure similar to that previously observed for lifted laminar flames at similar thermochemical conditions. In conclusion, a combustion mode analysis based on key radical species illustrates the multi-stage and multi-mode nature of the ignition process and highlights the substantial modelling challenge presented by diesel combustion.

33 ADVANCED PROPULSION SYSTEMS↗

Turbulence/flame/wall interactions in non-premixed inclined slot-jet flames impinging at a wall using direct numerical simulation

In this paper, three-dimensional turbulent non-premixed oblique slot-jet flames impinging at a wall were investigated using direct numerical simulation (DNS). Two cases are considered with the Damköhler number (Da) of case A being twice that of case B. A 17 species and 73-step mechanism for methane combustion was employed in the simulations. It was found that flame extinction in case B is more prominent compared to case A. Reignition in the lower branch of combustion for case A occurs when the scalar dissipation rate relaxes, while no reignition occurs in the lower branch for case B due to excessive scalar dissipation rate. A method was proposed to identify the flame quenching edges of turbulent non-premixed flames in wall-bounded flows based on the intersections of mixture fraction and OH mass fraction iso-surfaces. The flame/wall interactions were examined in terms of the quenching distance and the wall heat flux along the quenching edges. There is essentially no flame/wall interaction in case B due to the extinction caused by excessive turbulent mixing. In contrast, significant interactions between flames and the wall are observed in case A. The quenching distance is found to be negatively correlated with wall heat flux as previously reported in turbulent premixed flames. The influence of chemical reactions and wall on flow topologies was identified. The FS/U and FC/U topologies are found near flame edges, and the NNN/U topology appears when reignition occurs. The vortex-dominant topologies, FC/U and FS/S, play an increasingly important role as the jet turbulence develops.

42 ENGINEERING↗

A method for the direct numerical simulation of hypersonic boundary-layer instability with finite-rate chemistry

A new numerical method is presented here that allows to consider chemically reacting gases during the direct numerical simulation of a hypersonic fluid flow. The method comprises the direct coupling of a solver for the fluid mechanical model and a library providing the physio-chemical model. The numerical method for the fluid mechanical model integrates the compressible Navier–Stokes equations using an explicit time advancement scheme and high-order finite differences. This Navier–Stokes code can be applied to the investigation of laminar-turbulent transition and boundary-layer instability. The numerical method for the physio-chemical model provides thermodynamic and transport properties for different gases as well as chemical production rates, while here we exclusively consider a five species air mixture. The new method is verified for a number of test cases at Mach 10, including the one-dimensional high-temperature flow downstream of a normal shock, a hypersonic chemical reacting boundary layer in local thermodynamic equilibrium and a hypersonic reacting boundary layer with finite-rate chemistry. We are able to confirm that the diffusion flux plays an important role for a high-temperature boundary layer in local thermodynamic equilibrium. Moreover, we demonstrate that the flow for a case previously considered as a benchmark for the investigation of non-equilibrium chemistry can be regarded as frozen. Finally, the new method is applied to investigate the effect of finite-rate chemistry on boundary layer instability by considering the downstream evolution of a small-amplitude wave and comparing results with those obtained for a frozen gas as well as a gas in local thermodynamic equilibrium.

42 ENGINEERING↗

A direct numerical simulation study of flame structure and stabilization of an experimental high Ka CH 4 /air premixed jet flame

In the present work, a direct numerical simulation (DNS) of an experimental high Karlovitz number (Ka) CH 4 /air piloted premixed flame was analyzed to study the inner structure and the stabilization mechanism of the turbulent flame. A reduced chemical mechanism for premixed CH 4 /air combustion with NO x based on GRI-Mech3.0 was used, including 268 elementary reactions and 28 transported species. The evolution of the stretch factor, I 0 , indicates that the burning rate per unit flame surface area is considerably reduced in the near field and exhibits a minimum at x /D = 8. Downstream, the burning rate gradually increases. The stretch factor is different between different species, suggesting the quenching of some reactions but not others. Comparison between the turbulent flame and strained laminar flames indicates that certain aspects of the mean flame structure can be represented surprisingly well by flamelets if changes in boundary conditions are accounted for and the strain rate of the mean flow is employed; however, the thickening of the flame due to turbulence is not captured. The spatial development of displacement speeds is studied at higher Ka than previous DNS. In contrast to almost all previous studies, the mean displacement speed conditioned on the flame front is negative in the near field, and the dominant contribution to the displacement speed is normal diffusion with the reaction contribution being secondary. Further downstream, reaction overtakes normal diffusion, contributing to a positive displacement speed. The negative displacement speed in the near field implies that the flame front situates itself in the pilot region where the inner structure of the turbulent flame is affected significantly, and the flame stabilizes in balance with the inward flow. Notably, in the upstream region of the turbulent flame, the main reaction contributing to the production of OH, H+O 2 ⇌O+OH (R35), is weak. Moreover, oxidation reactions, H 2 +OH⇌H+H 2 O (R79) and CO+OH⇌CO 2 +H (R94), are influenced by H 2 O and CO 2 from the pilot and are completely quenched. Hence, the entire radical pool of OH, H and O is affected. Furthermore, the fuel consumption layer remains comparably active and generates heat, mainly via the reaction CH 4 +OH⇌CH 3 +H 2 O (R93).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Petascale direct numerical simulation of turbulent combustion—fundamental insights towards predictive models

The advent of petascale computing applied to direct numerical simulation (DNS) of turbulent combustion has transformed our ability to interrogate fine-grained ‘turbulence-chemistry’ interactions in canonical and laboratory configurations. In particular, three-dimensional DNS, at moderate Reynolds numbers and with complex chemistry, is providing unprecedented levels of detail to isolate and reveal fundamental causal relationships between turbulence, mixing and reaction. This information is leading to new physical insight, providing benchmark data for assessing model assumptions, suggesting new closure hypotheses, and providing interpretation of statistics obtained from lower-dimensional measurements. In this paper the various roles of petascale DNS are illustrated through selected examples related to lifted flame stabilization, premixed and stratified flame propagation in intense turbulence, and extinction and reignition in turbulent non-premixed jet flames. Extending the DNS envelope to higher Reynolds numbers, higher pressures, and greater chemical complexity will require exascale computing in the next decade. The future outlook of DNS in terms of challenges and opportunities in this regard are addressed.

Energy & Fuels↗

Direct numerical simulations of the turbulent wake of an axisymmetric body

The paper presents comparisons of results of direct numerical simulations of turbulence with both laboratory data and self-similarity theory for the case of the turbulent wakes of towed, axisymmetric bodies. In general, the agreement of the simulation results with both the laboratory data and the self-similarity theory is good, although the comparisons are hampered by inadequate procedures for initializing the numerical simulations.

Riley, J. J.↗

Scalability study of parallel spatial direct numerical simulation code on IBM SP1 parallel supercomputer

The implementation and the performance of a parallel spatial direct numerical simulation (PSDNS) code are reported for the IBM SP1 supercomputer. The spatially evolving disturbances that are associated with laminar-to-turbulent in three-dimensional boundary-layer flows are computed with the PS-DNS code. By remapping the distributed data structure during the course of the calculation, optimized serial library routines can be utilized that substantially increase the computational performance. Although the remapping incurs a high communication penalty, the parallel efficiency of the code remains above 40% for all performed calculations. By using appropriate compile options and optimized library routines, the serial code achieves 52-56 Mflops on a single node of the SP1 (45% of theoretical peak performance). The actual performance of the PSDNS code on the SP1 is evaluated with a 'real world' simulation that consists of 1.7 million grid points. One time step of this simulation is calculated on eight nodes of the SP1 in the same time as required by a Cray Y/MP for the same simulation. The scalability information provides estimated computational costs that match the actual costs relative to changes in the number of grid points.

Hanebutte, Ulf R.↗

Direct Numerical Simulation of Receptivity to Roughness in a Swept-Wing Boundary Layer at High Reynolds Numbers

Direct numerical simulations (DNS) are performed to examine the receptivity to roughness in a spatially developing three-dimensional boundary layer over an in finite-swept natural-laminar-flow wing at a free stream Mach number of 0:75 and a chord Reynolds number of approximately 25 million based on the long, swept chord. Stationary cross ow disturbances are excited by applying either critically spaced discrete cylinders of micron size or naturally occurring distributed roughness in the leading-edge region. The DNS data show that the spanwise spectral content of the excited cross ow disturbances is highly dependent upon the shape of roughness elements, and the initial growth of the cross ow structures is a nonlinear function of the element height. The linear growth rate of the excited cross ow disturbances predicted by DNS shows good agreement with linear parabolized stability equations. The receptivity study lays the foundation for investigating the stabilization of the naturally most unstable steady cross ow mode by using spanwise periodic DREs.

Nicholson, Gary↗

Critical comparison of second-order closures with direct numerical simulations of homogeneous turbulence

Recently, several models have been proposed for closing the second-moment equations, in which the velocity-pressure gradient tensor and the dissipation rate tensor are two of the most important terms. In the literature, these correlation tensors are usually decomposed into a so-called rapid term and a return-to-isotropy term. Models of these terms have been used in global flow calculations together with other modeled terms. However, their individual behaviors in different flows have not been fully examined because they are unmeasurable in the laboratory. Recently, the development of direct numerical simulation (DNS) of turbulence has given us the possibility to do this kind of study. With direct numerical simulation, we may use the solution to calculate exactly the values of these correlation terms and then directly compare them with the values from their modeled formulations. In this paper, we make direct comparisons of five representative rapid models and eight return-to-isotropy models using the DNS data of 45 homogeneous flows, which were done by Rogers et al. (1986) and Lee and Reynolds (1985). The purpose of these direct comparisons is to explore the performance of these models in different flows and identify the ones that give the best performance. The paper also describes the modeling procedure, model constraints, and the various evaluated models. The detailed results of the direct comparisons are discussed, and a few concluding remarks on turbulence models are given.

Shih, Tsan-Hsing↗

Direct numerical simulation of a high-pressure hydrogen micromix combustor: Flame structure and stabilisation mechanism

A high-pressure hydrogen micromix combustor has been investigated using direct numerical simulation with detailed chemistry to examine the flame structure and stabilisation mechanism. The configuration of the combustor was based on the design by Schefer et al., using numerical periodicity to mimic a large square array. A precursor simulation of an opposed jet-in-crossflow was first conducted to generate appropriate partially-premixed inflow boundary conditions for the subsequent reacting simulation. The resulting flame can be described as an predominantly-lean inhomogeneously-premixed lifted jet flame. Five main zones were identified: a jet mixing region, a core flame, a peripheral flame, a recirculation zone, and combustion products. The core flame, situated over the jet mixing region, was found to burn as a thin reaction front, responsible for over 85% of the total fuel consumption. The peripheral flame shrouded the core flame, had low mean flow with high turbulence, and burned at very lean conditions (in the distributed burning regime). It was shown that turbulent premixed flame propagation was an order-of-magnitude too slow to stabilise the flame at these conditions. Stabilisation was identified to be due to ignition events resulting from turbulent mixing of fuel from the jet into mean recirculation of very lean hot products. Ignition events were found to correlate with shear-driven Kelvin-Helmholtz vortices, and increased in likelihood with streamwise distance. At the flame base, isolated events were observed, which developed into rapidly burning flame kernels that were blown downstream. Further downstream, near-simultaneous spatially-distributed ignition events were observed, which appeared more like ignition sheets. The paper concludes with a broader discussion that considers generalising from the conditions considered here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A critical comparison of second order closures with direct numerical simulation of homogeneous turbulence

Recently, several second order closure models have been proposed for closing the second moment equations, in which the velocity-pressure gradient (and scalar-pressure gradient) tensor and the dissipation rate tensor are two of the most important terms. In the literature, these correlation tensors are usually decomposed into a so called rapid term and a return-to-isotropy term. Models of these terms have been used in global flow calculations together with other modeled terms. However, their individual behavior in different flows have not been fully examined because they are un-measurable in the laboratory. Recently, the development of direct numerical simulation (DNS) of turbulence has given us the opportunity to do this kind of study. With the direct numerical simulation, we may use the solution to exactly calculate the values of these correlation terms and then directly compare them with the values from their modeled formulations (models). Here, we make direct comparisons of five representative rapid models and eight return-to-isotropy models using the DNS data of forty five homogeneous flows which were done by Rogers et al. (1986) and Lee et al. (1985). The purpose of these direct comparisons is to explore the performance of these models in different flows and identify the ones which give the best performance. The modeling procedure, model constraints, and the various evaluated models are described. The detailed results of the direct comparisons are discussed, and a few concluding remarks on turbulence models are given.

Shih, Tsan-Hsing↗

Direct Numerical Simulation of hydrogen combustion at auto-ignitive conditions: Ignition, stability and turbulent reaction-front velocity

Direct Numerical Simulations (DNS) are performed to investigate the process of spontaneous ignition of hydrogen flames at laminar, turbulent, adiabatic and non-adiabatic conditions. Mixtures of hydrogen and vitiated air at temperatures representing gas-turbine reheat combustion are considered. Adiabatic spontaneous ignition processes are investigated first, providing a quantitative characterization of stable and unstable flames. Results indicate that, in hydrogen reheat combustion, compressibility effects play a key role in flame stability and that unstable ignition and combustion are consistently encountered for reactant temperatures close to the mixture’s characteristic crossover temperature. Furthermore, it is also found that the characterization of the adiabatic processes is also valid in the presence of non-adiabaticity due to wall heat-loss. Finally, a quantitative characterization of the instantaneous fuel consumption rate within the reaction front is obtained and of its ability, at auto-ignitive conditions, to advance against the approaching turbulent flow of the reactants, for a range of different turbulence intensities, temperatures and pressure levels.

42 ENGINEERING↗

Direct numerical simulation of an auto-ignitive turbulent flame in a stratified dimethyl-ether (DME)/air mixture

Direct numerical simulations (DNS) of a turbulent premixed flame in an auto-ignitive dimethyl-ether (DME)/air mixture exhibiting two-staged ignition were conducted at elevated pressure and temperature using a statistically stationary planar configuration. Three sets of conditions with an identical turbulence intensity, but different stratification/turbulence length scales and correlations between temperature (T) and equivalence ratio (f) fields were simulated to study the dynamics of turbulent premixed flame propagation at auto-ignitive conditions. The influence of different stratification length scales and T-f correlations on turbulent flame speed was examined by comparing the flame statistics obtained from 2D simulations against laminar 1D solution. A global analysis of the front propagation speed was carried out for determining the effect of turbulent wrinkling and the role of upstream auto-ignition on the overall burning rate.

Desai, Swapnil S.↗