Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Year six photometric measurements of known Trans-Neptunian Objects and Centaurs by the Dark Energy Survey

ABSTRACT We identified known Trans-Neptunian Objects (TNOs) and Centaurs in the complete Dark Energy Survey (DES) year six catalogue (DES Y6) through the Sky Body Tracker (SkyBoT) tool. We classified our data set of 144 objects into a widely used 4-class taxonomic system of TNOs. No such previous classification was available in the literature for most of these objects. From absolute magnitudes and average albedos, an estimation of the diameters of all these objects is obtained. Correlations involving colours, orbital parameters, dynamical classes, and sizes are also discussed. In particular, our largest reddest object has a diameter of $390^{+68}_{-53}$ km and our largest cold classical, $255^{+19}_{-17}$ km. Also, a weak correlation between colour and inclination is found within the population of resonant TNOs in addition to weak correlations between colour and phase slope in different bands.

79 ASTRONOMY AND ASTROPHYSICS↗

Entanglement and parametric resonance in driven quantum systems

We study the relationship between entanglement and parametric resonance in a system of two coupled time-dependent oscillators. As a measure of bipartite entanglement, we calculate the linear entropy for the reduced density operator, from which we study the entanglement dynamics. In particular, we find that the bipartite entanglement increases in time up to a maximal mixing scenario, when the set of auxiliary dynamical parameters are under parametric resonance. Moreover, we obtain a closed relationship between the correlations in the ground state, the localization of the Wigner function in phase space, and the localization of the wave function of the total system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solitons in curved space of constant curvature

We consider spatial solitons as, for example, self-confined optical beams in spaces of constant curvature, which are a natural generalization of flat space. Due to the symmetries of these spaces we are able to define respective dynamical parameters, for example, velocity and position. For positively curved space we find stable multiple-hump solitons as a continuation from the linear modes. In the case of negatively curved space we show that no localized solution exists and a bright soliton will always decay through a nonlinear tunneling process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evidence for photoinduced sliding of the charge-order condensate in La 1.875 Ba 0.125 CuO 4

In this study, we use femtosecond resonant soft x-ray scattering to measure the ultrafast optical melting of charge-order correlations in La 1.875 Ba 0.125 CuO 4 . By analyzing both the energy-resolved and the energy-integrated order-parameter dynamics, we find evidence of a short-lived nonequilibrium state, the features of which are compatible with a sliding charge-density wave coherently set in motion by the pump. This transient state exhibits shifts in both the quasielastic line energy and its wave vector, as expected from a classical Doppler effect. The wave-vector change is indeed found to directly follow the pump propagation direction. Finally, these results demonstrate the existence of sliding charge-order behavior in an unconventional charge-density wave system and underscore the power of ultrafast optical excitation as a tool to coherently manipulate electronic condensates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pump-induced motion of an interface between competing orders

In this work, we study the motion of an interface separating two regions with different electronic orders following a short-duration pump that drives the system out of equilibrium. Using a generalized Ginzburg-Landau approach and assuming that the main effect of the nonequilibrium drive is to transiently heat the system we address the question of the direction of interface motion—in other words, which ordered region expands and which contracts after the pump. Our analysis includes the effects of differences in free-energy landscape and in order parameter dynamics and identifies circumstances in which the drive may act to increase the volume associated with the subdominant order, for example when the subdominant order has a second-order free-energy landscape while the dominant order has a first-order one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Validation of Power Distribution Models using Load Flow Analysis in an ADMS Environment

Electric utilities are facing the need for better monitoring, analysis, and control of their distribution systems. An accurate mathematical model is a key to both the development of cutting-edge, scalable model-based algorithms and the assessment of emerging technologies such as distributed energy resources (DER) for grid planning and operation. However, the constantly evolving nature of power distribution systems poses challenges to maintaining accurate models. In this paper, we propose a novel load flow based approach to validate power distribution models. Networked equipment models described according to the Common Information Model (CIM) standard and a measurement model are used to formulate the distribution load flow problem. First, a system admittance matrix (Ybus) is derived from device-level CIM parameters. Next, the operational parameters (dynamic Ybus and nodal injections) are extracted from the measurement model using sensor configuration and equipment state. An iterative power flow method is then used to compute nodal voltages and branch flows that are compared against the measurement data to find any inconsistencies in the networked equipment model. This approach is implemented within GridAPPS-D, an open-source standards-based platform for advanced distribution management system (ADMS) application development, and demonstrated on the IEEE 13-bus, 123-bus, and 8500-node test feeders.

Common information model, model validation, power ↗

Adaptive stabilization of quantum circuits executed on unstable devices

Conventional computers have evolved to device components that demonstrate failure rates of 10 −17 or less, while current quantum computing devices typically exhibit error rates of 10 −2 or greater. This raises concerns about the reliability and reproducibility of the results obtained from quantum computers. The problem is highlighted by experimental observation that today’s NISQ devices are inherently unstable. Remote quantum cloud servers typically do not provide users with an ability to calibrate the device themselves. Using inaccurate characterization data for error mitigation can have devastating impact on reproducibility. In this study, we investigate if one can infer the critical channel parameters dynamically from the noisy binary output of the executed quantum circuit and use it to improve program stability. An open question however is how well does this methodology scale. We discuss the efficacy and efficiency of our adaptive algorithm using canonical quantum circuits such as the uniform superposition circuit. Our metric of performance is the Hellinger distance between the post-stabilization observations and the reference (ideal) distribution.

Dasgupta, Samudra↗

Theoretical Control-Centric Modeling for Precision Model-Based Sliding Mode Control of a Hydraulic Artificial Muscle Actuator

Artificial muscles (AMs) typically rely on pneumatic sources of fluid power. The use of hydraulics can increase the power and force to weight and volume ratios of AM actuators. This paper develops a control-centric third-order single-input single-output (SISO) lumped-parameter dynamic model and sliding mode position controller based on Filippov's principle of equivalent dynamics for a braided hydraulic artificial muscle (HAM) actuator. The model predicts the nonlinear behavior of the HAM free contraction and captures the fluid and actuator nonlinear dynamic interactions in addition to the braid deformation. Model simulations are compared to experimental results for quasi-static pressurization, isometric pressurization, and open-loop square wave commands at 0.25, 0.5, and 1 Hz. Experiments of sine wave tracking at 0.25, 0.5, and 1 Hz and continuous square wave tracking at 0.067 Hz are conducted using a sliding mode controller (SMC) derived from the model. The SMC achieves a steady-state error of 6 μm at multiple setpoints within the actuator's 17 mm stroke. Compared to a proportional-integral-derivative (PID) controller, the SMC root-mean-square (RMS) error, mean error, and absolute maximum error are reduced on average by 53%, 61%, and 44%, respectively, demonstrating the benefit of model-based approaches for controlling HAMs.

42 ENGINEERING↗

Injury and Mortality of Juvenile Salmon Entrained in a Submerged Jet Entering Still Water

Abstract Development of more eco-friendly hydroelectric facilities requires better understanding of the biological response of juvenile fish when they migrate through the turbines and other downstream passage facilities. Juvenile fall Chinook salmon Oncorhynchus tshawytscha were exposed to turbulent shear flows in a laboratory by using a fast-fish-to-slow-water mechanism in which test fish were carried by the fast-moving water of a submerged turbulent jet into the slow-moving water of a flume. Fish were released at six nozzle velocities: 6.1 (reference control), 12.2, 15.2, 18.3, 21.3, and 22.9 m/s. The onset of minor and major injuries occurred at 15.2 and 21.3 m/s, respectively. The acceleration magnitude threshold (m/s2) of major injury for the fast-fish-to-slow-water mechanism in this study was found to be significantly higher than that for a slow-fish-to-fast-water mechanism used in a previous study in which test fish were introduced into a turbulent jet from slow-moving water through an introduction tube placed just outside the edge of the jet. Fish responded differently and sustained different injuries when they were subjected to turbulent shear flows under the two exposure mechanisms. This information is applicable to the design and operation of turbines and spillways because these two tested mechanisms simulate the severe hydraulic events fish usually experience during passage at hydropower dams.

Deng, Zhiqun↗

Experiments with Undulator Radiation, Emitted by a Single Electron

We study a single electron, circulating in the Fermilab IOTA storage ring and interacting with an undulator through single and multi-photon emissions. The focus of this research is on single-photon and two-photon undulator emissions. We begin by using one Single Photon Avalanche Diode (SPAD) detector to detect the undulator radiation photons and search for possible deviations from the expected Poissonian photon statistics. Then, we go on to use a two-photon interferometer consisting of two SPAD detectors separated by a beam splitter. This allows to test if there is any correlation in the detected photon pairs. In addition, the photocount arrival times can be used to track the longitudinal motion of a single electron and to compare it with simulations. This allowed us to determine several dynamical parameters of the storage ring such as the rf cavity phase jitter and the dependence of the synchrotron motion period on amplitude.

43 PARTICLE ACCELERATORS↗

Developing Generic Dynamic Models for the 2030 Eastern Interconnection Grid

The Eastern Interconnection Planning Collaborative (EIPC) has built three major power flow cases for the 2030 Eastern Interconnection (EI) based on various levels of energy/environmental policy conditions, technology advances, and load growth. Using the power flow cases, this report documents the process of developing the generic 2030 dynamic models using typical dynamic parameters. The constructed model was validated indirectly using the synchronized phasor measurements by removing the wind generation temporarily.

54 ENVIRONMENTAL SCIENCES↗

Richtmyer-Meshkov instability on a low atwood number interface after reshock.

The Richtmyer-Meshkov instability after reshock is investigated in shock tube experiments at the Wisconsin Shock Tube Laboratory using planar laser imaging and a new high speed interface tracking technique. The interface is a 50-50% volume fraction mixture of helium and argon stratified over pure argon. This interface has an Atwood number of 0.29 and near single mode, two-dimensional, standing wave perturbation with an average amplitude of 0.35 cm and a wavelength of 19.4 cm. The incident shock wave of Mach number 1.92 accelerates the interface before it is reshocked by a reflected Mach 1.70 shock wave. The amplitude growth after reshock is reported for variations in this initial amplitude, and several amplitude growth rate models are compared to the experimental growth rate after reshock. A new growth model is introduced, based on a model of circulation deposition calculated from one-dimensional gas dynamics parameters. This model is shown to compare well with the amplitude growth rate after reshock and the circulation over a half-wavelength of the interface after the first shock wave and after reshock.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effectiveness of Vibration-Damping Coatings

The effectiveness of vibration-damping coatings is assessed by simulation. The experimental characteristics of the coatings are presented. An algorithm is proposed for assessment of the expected dynamic parameters of structures as a function of their shape and the characteristics of the vibration-damping materials.

42 ENGINEERING↗

SZ–X-Ray Surface Brightness Fluctuations in the SPT-XMM Clusters

The hot plasma in galaxy clusters, the intracluster medium, is expected to be shaped by subsonic turbulent motions, which are key for heating, cooling, and transport mechanisms. The turbulent motions contribute to the nonthermal pressure, which, if not accounted for, consequently imparts a hydrostatic mass bias. Accessing information about turbulent motions is thus of major astrophysical and cosmological interest. Characteristics of turbulent motions can be indirectly accessed through surface brightness fluctuations. This study expands on our pilot investigations of surface brightness fluctuations in the Sunyaev–Zel’dovich and in X-ray data by examining, for the first time, a large sample of 60 clusters using both SPT-SZ and XMM-Newton data and spans the redshift range 0.2 < z < 1.5, thus constraining the respective pressure and density fluctuations within 0.6 R $_{500}$. We deem density fluctuations to be of sufficient quality for 32 clusters, finding mild correlations between the peak of the amplitude spectra of density fluctuations and various dynamical parameters. We infer turbulent velocities from density fluctuations with an average Mach number $\mathcal{M}$ 3D = 0.52 ± 0.14, in agreement with numerical simulations. For clusters with inferred turbulent Mach numbers from fluctuations in both pressure, $\mathcal{M}$ P , and density, $\mathcal{M}$ ρ , we find broad agreement between $\mathcal{M}$ P and $\mathcal{M}$ ρ . Our results suggest either a bimodal or a skewed unimodal Mach number distribution, with the majority of clusters being turbulence-dominated (subsonic) while the remainder are shock-dominated (supersonic).

79 ASTRONOMY AND ASTROPHYSICS↗

Frequency spectrum analysis code for nuclear noise based on improved wavelet algorithm - 337

The core of the narrow flow channel generally faced the problem of local bubble boiling with the temperature rise of the nuclear fuel element, it is necessary and meaningful to answer and deal with the problem on the technical level. Reactor noise analysis begins with the study of the physical characteristics of the core, after nearly 30 years of research and development it has become a powerful tool in the auxiliary monitoring of the power reactor operating. By using this noise frequency spectrum analysis technology, the reactor dynamic parameter such as prompt neutron decay constant can be measured. Also, through such system, the frequency characteristics of reactor can be real-time monitored, which is helpful for safety operation and fault diagnosis. Spectrum analysis technology in the Fourier analysis era is now barely available, the reason is that the local spectral characteristics of this technology are not obvious, but this defect can be greatly improved by wavelet analysis technique, however, the traditional wavelet analysis will introduce the problem of spectral confusion. To solve the problem, based on the improved wavelet algorithm, frequency spectrum analysis code for nuclear noise is developed,from the perspective of fine spectral analysis, the local boiling accident of the coolant can be prejudged and avoid. Based on the analysis and test of experimental data,The results show that the calculation ability of the code is in accordance with the expected, it can be applied in the operation of research reactor. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Density Functional Theory Calculation of Bonding and Charge Parameters for Molecular Dynamics Studies of [FeFe] Hydrogenases

We have developed and tested molecular mechanics parameters for [FeS] clusters found in known [FeFe] hydrogenases. Bond stretching, angle bending, dihedral and improper torsion parameters for models of the oxidized and reduced catalytic H-cluster, [4Fe4S]{sup +,2+}Cys{sub 4}, [4Fe4S]{sup +,2+}Cys{sub 3}His, and [2Fe2S]{sup +,2+}Cys{sub 4}, were calculated solely from Kohn-Sham density functional theory and Natural Population Analysis. Circumsphere analysis of the cubane clusters in the energy-minimized structure of the full Clostridium pasteurianum hydrogenase I showed the resulting metallocluster structures to be similar to known cubane structures. All clusters were additionally stable in molecular dynamics simulations over the course of 1.0 ns in the fully oxidized and fully reduced enzyme models. Normal modes calculated by quasiharmonic analysis from the dynamics data show unexpected couplings among internal coordinate motions, which may reflect the effects of the protein structure on metallocluster dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-order beam dynamics and RF parameters for the PSR short-bunch ("pulse-stacking") mode

Here we mainly discuss the longitudinal ring beam dynamics and RF control for the bunching needed to maintain the short (a few nanoseconds) proton pulses required by the Weapons Neutron Research Center (WNR) for measurement of neutron cross sections and reaction dynamics, as specified in the recent upgrade proposal known as “Pulse Stacking.” Single micropulses, each containing 6x10 8 protons, are to be delivered to the Proton Storage Ring (PSR) from the LANSCE linac and successively overlaid in from 1 to 4 RF buckets per ring turn until a maximum number of particles in the bucket is achieved. This is distinct from the currently used long-pulse mode in which the bucket equals the ring circumference and a 201-MHz micropulse stream is injected at each turn to fill ¾ of the bucket to obtain pulses ~270 ns long.

Accelerator Design, Technology, and Operations↗