Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRON DIFFUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Observations of 10-eV to 25-keV electrons in steady diffuse aurora from Atmosphere Explorer C and D

Electron energy spectra from 10 eV to 25 keV have been obtained from steady diffuse auroral forms at altitudes above 150 km by the Atmosphere Explorer C and D spacecraft. Overlapping coverage of the energy range was provided by the photoelectron spectrometer experiment (10-500 eV) and the low-energy electron experiment (0.2-25 keV). The spectral shape between 10 and 20 eV is independent of altitude between 150 and 270 km, has variable energy dependence between about 20 and 150 eV, and above approximately 150 eV has energy dependence determined primarily by the details of the energy spectrum of electrons incident on the atmosphere. The observed results are in satisfactory agreement with two recently published model calculations.

Peterson, W. K.↗
NASA NTRS2004

Measurement of N-Type 6H SiC Minority-Carrier Diffusion Lengths by Electron Bombardment of Schottky Barriers

Minority-Carrier diffusion lengths of n-type 6H-SiC were measured using the electron-beam induced current (EBIC) technique. Experimental values of primary beam current, EBIC, and beam voltage were obtained for a variety of SIC samples. This data was used to calculate experimental diode efficiency vs. beam voltage curves. These curves were fit to theoretically calculated efficiency curves, and the diffusion length and metal layer thickness were extracted. The hole diffusion length in n-6H SiC ranged from 0.93 +/- 0.15 microns.

Hubbard, S. M.↗
NASA NTRS1979

Jovian electron propagation out of the solar equatorial plane - Pioneer 11 observations

Jovian electron intensity in the energy range 2-7 MeV was measured along the trajectory of Pioneer 11 up to 16 deg heliographic latitude. These electrons have crossed the average direction of the interplanetary magnetic field, propagating normal to the solar equatorial plane, and their intensity continues to be modulated by corotating interaction regions over this latitude range. From these data, the electron diffusion coefficient perpendicular to the equatorial plane (K2 = 2 x 10 to the 20th sq cm/s) was derived to within a factor 2 using a three-dimensional diffusion-convection model and the values of the parallel and perpendicular diffusion coefficients in the solar equatorial plane (Ky = 5 x 10 to the 22nd sq cm/s, K2 = 10 to the 21st sq cm/s, respectively), which had previously successfully described Jovian electron propagation near the equatorial plane from 1 to about 10 AU. These results indicate that the Jovian electron intensity may be very low at high solar latitudes.

Hamilton, D. C.↗
NASA NTRS2005

Experimental and analytical investigation of a modified ring cusp NSTAR engine

A series of experimental measurements on a modified laboratory NSTAR engine were used to validate a zero dimensional analytical discharge performance model of a ring cusp ion thruster. The model predicts the discharge performance of a ring cusp NSTAR thruster as a function the magnetic field configuration, thruster geometry, and throttle level. Analytical formalisms for electron and ion confinement are used to predict the ionization efficiency for a given thruster design. Explicit determination of discharge loss and volume averaged plasma parameters are also obtained. The model was used to predict the performance of the nominal and modified three and four ring cusp 30-cm ion thruster configurations operating at the full power (2.3 kW) NSTAR throttle level. Experimental measurements of the modified engine configuration discharge loss compare well with the predicted value for propellant utilizations from 80 to 95%. The theory, as validated by experiment, indicates that increasing the magnetic strength of the minimum closed reduces maxwellian electron diffusion and electrostatically confines the ion population and subsequent loss to the anode wall. The theory also indicates that increasing the cusp strength and minimizing the cusp area improves primary electron confinement increasing the probability of an ionization collision prior to loss at the cusp.

cathodes↗
NASA NTRS2022

Progress in InAs/InAsSb Superlattice Barrier Infrared Detectors

The InAs/InAsSb (Gallium-free) type-II strained-layer superlattice (T2SLS) has emerged in recent years as a viable infrared detector material. In particular, mid-wavelength InAs/InAsSb T2SLS focal plane array (FPA) based on the nBn detector architecture exhibits good operating characteristics at 160 K, demonstrating a considerably operating temperature advantage over InSb FPAs. In the long and very long cutoff wavelengths, InAs/InAsSb T2SLS detectors with n-type absorbers are limited in their attainable quantum efficiency (QE) due to shorter hole diffusion lengths and relatively modest absorption coefficients. We have explored long and very long wavelength InAs/InAsSb T2SLS complementary barrier infrared detectors (CBIRDs) that contain p-type absorber layers in order to take advantage of the longer electron diffusion length for QE enhancement. We also discuss recent development of the InAs/InAsSb T2SLS infrared detectors at the Jet Propulsion Laboratory for NASA Earth Science applications, including long-wavelength infrared FPAs for land imaging, and mid-wavelength infrared FPAs for CubeSat hyperspectral imaging.

Pagano, Thomas S.↗
NASA NTRS1994

Unusual satellite-electron signature within the Uranian magnetosphere and its implications regarding whistler electron loss processes

It has been reported that during the outbound (nightside) portion of the Voyager 2 encounter with the Uranian magnetosphere, intense whistler mode emissions were observed near the magnetic equator (lambda(sub m) approx. 16 deg) and at L shell values between approx. 5.5 and approx. 9 R(sub U). Comprehensive calculations of whistler-driven pitch angle diffusion, in previous work, have yielded strong diffusion electron lifetimes of approx. 1 hour for 20 to 40 keV electrons. In this paper we report on an unusual and sharply defined charged particle feature that: (1) involved electrons between 22 and 35 keV, (2) was observed during the time period of the intense whistler mode observations, (3) was aligned very accurately and sharply with the minimum L shell position (L approx. 7.5) of the satellite Ariel, and (4) has an appearance that suggests that electrons were removed only at and beyond Ariel's minimum-L. On the basis of our conclusion that the signature was caused by electron interactions with either Ariel or materials distributed along Ariel's orbit, the signature could not have been generated for at least 10 hours prior to its observation. Thus the calculated whistler loss times are in apparent conflict with the signature observation. A scenario of events is proposed to explain the data that involves substormlike electron acceleration on the Uranian nightside and a subsequent sculpting of the electron spatial distributions via interactions with Ariel or materials distributed along Ariel's orbit. The possibility exists that the accurate alignment of the sharp electron feature with Ariel's minimum-L, and the absorptionlike character of the feature, are accidental, and that the feature is caused by dynamical processes (e.g., substorms). In this case the dynamical processes must be quite dissimilar to those occurring in the Earth's magnetosphere.

Mauk, B. H.↗
NASA NTRS2003

Magnetic Field Would Reduce Electron Backstreaming in Ion Thrusters

The imposition of a magnetic field has been proposed as a means of reducing the electron backstreaming problem in ion thrusters. Electron backstreaming refers to the backflow of electrons into the ion thruster. Backstreaming electrons are accelerated by the large potential difference that exists between the ion-thruster acceleration electrodes, which otherwise accelerates positive ions out of the engine to develop thrust. The energetic beam formed by the backstreaming electrons can damage the discharge cathode, as well as other discharge surfaces upstream of the acceleration electrodes. The electron-backstreaming condition occurs when the center potential of the ion accelerator grid is no longer sufficiently negative to prevent electron diffusion back into the ion thruster. This typically occurs over extended periods of operation as accelerator-grid apertures enlarge due to erosion. As a result, ion thrusters are required to operate at increasingly negative accelerator-grid voltages in order to prevent electron backstreaming. These larger negative voltages give rise to higher accelerator grid erosion rates, which in turn accelerates aperture enlargement. Electron backstreaming due to accelerator-gridhole enlargement has been identified as a failure mechanism that will limit ionthruster service lifetime. The proposed method would make it possible to not only reduce the electron backstreaming current at and below the backstreaming voltage limit, but also reduce the backstreaming voltage limit itself. This reduction in the voltage at which electron backstreaming occurs provides operating margin and thereby reduces the magnitude of negative voltage that must be placed on the accelerator grid. Such a reduction reduces accelerator- grid erosion rates. The basic idea behind the proposed method is to impose a spatially uniform magnetic field downstream of the accelerator electrode that is oriented transverse to the thruster axis. The magnetic field must be sufficiently strong to impede backstreaming electrons, but not so strong as to significantly perturb ion trajectories. An electromagnet or permanent magnetic circuit can be used to impose the transverse magnetic field downstream of the accelerator-grid electrode. For example, in the case of an accelerator grid containing straight, parallel rows of apertures, one can apply nearly uniform magnetic fields across all the apertures by the use of permanent magnets of alternating polarity connected to pole pieces laid out parallel to the rows, as shown in the left part of the figure. For low-temperature operation, the pole pieces can be replaced with bar magnets of alternating polarity. Alternatively, for the same accelerator grid, one could use an electromagnet in the form of current-carrying rods laid out parallel to the rows.

Foster, John E.↗
NASA NTRS1979

A cesium TELEC experiment at Lewis Research Center

The thermoelectronic laser energy converter (TELEC), was studied as a method of converting a 10.6 mm CO2 laser beam into electric power. The calculated characteristics of a TELEC seem to be well matched to the requirements of a spacecraft laser energy conversion system. The TELEC is a high power density plasma device which absorbs an intense laser beam by inverse bremsstrahlung with the plasma electrons. In the TELEC process, electromagnetic radiation is absorbed directly in the plasma electrons producing a high electron temperature. The energetic electrons diffuse out of the plasma striking two electrodes which are in contact with the plasma at the boundaries. These two electrodes have different areas: the larger one is designated as the collector, the smaller one is designated as the emitter. The smaller electrode functions as an electron emitter to provide continuity of the current. Waste heat is rejected from the collector electrode. An experiment was carried out with a high power laser using a cesium vapor TELEC cell with 30 cm active length. Laser supported plasma was produced in the TELEC device during a number of laser runs over a period of several days. Electric power from the TELEC was observed with currents in the range of several amperes and output potentials of less than 1 volt. The magnitudes of these electric outputs were smaller than anticipated but consistent with the power levels of the laser during this experiment.

Britt, E. J.↗
NASA NTRS1982

Status of thermoelectronic laser energy conversion, TELEC

A concept known as a thermo-electronic laser energy converter (TELEC), was studied as a method of converting a 10.6 micron CO2 laser beam into electric power. The calculated characteristics of a TELEC seem to be well matched to the requirements of a spacecraft laser energy conversion system. The TELEC is a high power density plasma device which absorbs an intense laser beam by inverse bremsstrahlung with the plasma electrons. In the TELEC process, electromagnetic radiation is absorbed directly in the plasma electrons producing a high electron temperature. The energetic electrons diffuse out of the plasma striking two electrodes which are in contact with the plasma at the boundaries. These two electrodes have different areas: the larger one is designated as the collector, the smaller one is designated as the emitter. The smaller electrode functions as an electron emitter provide continuity of the current. Waste heat is rejected from the collector electrode. An experiment was carried out with a high power laser using a cesium vapor TELEC cell with 30 cm active length. Laser supported plasma were produced in the TELEC device during a number of laser runs over a period of several days. Electric power from the TELEC was observed with currents in the range of several amperes and output potentials of less than 1 volt.

Britt, E. J.↗
NASA NTRS2010

The Inner Workings of Magnetic Reconnection: Diffusion Region in the Balance

The question of whether the micro scale controls the macroscale or vice-versa remains one of the most challenging problems in plasmas. A particular topic of interest within this context is collisionless magnetic reconnection, where both points of views are espoused by different groups of researchers. This presentation will focus on this topic. We will begin by analyzing the properties of electron diffusion region dynamics both for guide field and anti-parallel reconnection, and how they can be scaled to different inflow conditions. As a next step, we will study typical temporal variations of the microscopic dynamics with the objective of understanding the potential for secular changes to the macroscopic system. The research will be based on a combination of analytical theory and numerical modeling.

Hesse, Michael↗
NASA NTRS1990

Theory of plasma contactors in ground-based experiments and low Earth orbit

Previous theoretical work on plasma contactors as current collectors has fallen into two categories: collisionless double layer theory (describing space charge limited contactor clouds) and collisional quasineutral theory. Ground based experiments at low current are well explained by double layer theory, but this theory does not scale well to power generation by electrodynamic tethers in space, since very high anode potentials are needed to draw a substantial ambient electron current across the magnetic field in the absence of collisions (or effective collisions due to turbulence). Isotropic quasineutral models of contactor clouds, extending over a region where the effective collision frequency upsilon sub e exceeds the electron cyclotron frequency omega sub ce, have low anode potentials, but would collect very little ambient electron current, much less than the emitted ion current. A new model is presented, for an anisotropic contactor cloud oriented along the magnetic field, with upsilon sub e less than omega sub ce. The electron motion along the magnetic field is nearly collisionless, forming double layers in that direction, while across the magnetic field the electrons diffuse collisionally and the potential profile is determined by quasineutrality. Using a simplified expression for upsilon sub e due to ion acoustic turbulence, an analytic solution has been found for this model, which should be applicable to current collection in space. The anode potential is low and the collected ambient electron current can be several times the emitted ion current.

Gerver, M. J.↗
NASA NTRS1995

Diffusion lengths in irradiated N/P InP-on-Si solar cells

Indium phosphide (InP) solar cells are being made on silicon (Si) wafers (InP/Si) to take advantage of both the radiation-hardness properties of the InP solar cell and the light weight and low cost of Si wafers compared to InP or germanium (Ge) wafers. The InP/Si cell application is for long duration and/or high radiation orbit space missions. InP/Si cells have higher absolute efficiency after a high radiation dose than gallium arsenide (GaAs) or silicon (Si) solar cells. In this work, base electron diffusion lengths in the N/P cell are extracted from measured AM0 short-circuit photocurrent at various irradiation levels out to an equivalent 1 MeV fluence of 1017 1 MeV electrons/sq cm for a 1 sq cm 12% BOL InP/Si cell. These values are then checked for consistency by comparing measured Voc data with a theoretical Voc model that includes a dark current term that depends on the extracted diffusion lengths.

Wojtczuk, Steven↗
NASA NTRS2023

3D Simulation of Lower-Hybrid Drift Waves in Strong Guide Field Asymmetric Reconnection in Laboratory Experiments

The magnetic reconnection experiment has recently seen short wavelength (kp (e)(1) lower-hybrid waves near the electron diffusion region in strong guide field reconnection. Based on plasma parameters from the experiment, we perform a three-dimensional fully kinetic simulation in order to investigate the generation of the lower-hybrid waves and their effects on the reconnection process. We find that the low-beta regions around the reconnection site are unstable to the lower-hybrid drift instability propagating in the outflow direction, driven by the difference between the electron and ion outflows. The waves modify the electron distributions, leading to periodic opening and closing of gaps in electron velocity space, and provide a small contribution to the anomalous resistivity. Finally, the simulation results are discussed in the context of space observations and laboratory experiments.

J. Ng↗
DOE OSTI2025

Energy resolution and gain measurements in Argon-based gas mixtures: Exploring Ar:CF 4 for low energy measurements with TPCs

Time Projection Chambers (TPCs) are among the most advanced charged-particle detectors. Gas-filled TPCs have tracking capabilities that provide 3D-imaging of charged particles with a good energy resolution for spectroscopy. Different gas mixtures have different properties that determine the energy resolution as well as the spatial resolution. Therefore, optimization of operating conditions is required to simultaneously obtain adequate gain, energy resolution, spatial/track resolution, as well as higher drift velocities for high counting rates applications. Ar:CF 4 gas mixture has higher electron drift velocities and lower electron diffusion, which makes it an attractive candidate for TPC filling gas for low energy nuclear physics applications as compared to commonly used Ar:CH 4 and Ar:CO 2 gas mixtures, namely when tracking information is needed. However, other properties, including energy resolution and gain, remain largely unexplored in Ar:CF 4 especially at pressures and other operating conditions relevant for low-energy nuclear physics applications. Here, in this paper we report on gain and energy resolution measurements, using Gas Electron Multipliers (GEMs), in the less explored Ar:CF 4 mixture (Alfonsi et al., 2006), as well as in the more commonly used gas mixtures Ar:CH 4 and Ar:CO 2 . In addition to obtaining energy resolution and gain, we provide results from Garfield++ simulations for gain fluctuations, and their impact on energy resolution is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2016

Cold Ion Demagnetization near the X-line of Magnetic Reconnection

Although the effects of magnetic reconnection in magnetospheres can be observed at planetary scales, reconnection is initiated at electron scales in a plasma. Surrounding the electron diffusion region, there is an Ion-Decoupling Region (IDR) of the size of the ion length scales (inertial length and gyroradius). Reconnection at the Earths magnetopause often includes cold magnetospheric (few tens of eV), hot magnetospheric (10 keV), and magnetosheath (1 keV) ions, with different gyroradius length scales. We report observations of a subregion inside the IDR of the size of the cold ion population gyroradius (approx. 15 km) where the cold ions are demagnetized and accelerated parallel to the Hall electric field. Outside the subregion, cold ions follow the E x B motion together with electrons, while hot ions are demagnetized. We observe a sharp cold ion density gradient separating the two regions, which we identify as the cold and hot IDRs.

Toledo-Redondo, Serio↗
DOE OSTI2025

Anomalous resistivity and electron heating by lower hybrid drift waves inside reconnecting current sheets

Inside an electron diffusion region of laboratory reconnection experiments, the quasi-electrostatic lower hybrid drift wave (ES-LHDW) is observed when a significant guide field component is present. Through direct measurement of the anomalous drag term and quasilinear analysis, it is shown that ES-LHDW can account for approximately 20% of the mean reconnection electric field in a case with moderate guide field. This value exceeds the contribution from classical resistivity, which is around 10%. The effects of the Lorentz force term, often neglected for electrostatic waves, are crucial for the observed correlation between electric field and density fluctuations. Anomalous electron heating by the perturbed current and resistivity (2.6 MW/m 3 ) also surpasses the classical Ohmic heating, which is about 2.0 MW/m 3 . For the case with a high guide field, significantly higher local electron temperatures were observed during periods of strong ES-LHDW activity. A statistical analysis further supports electron heating by LHDW, showing a larger increase in electron temperature with a high guide field. Finally, data from the Magnetospheric Multiscale mission provide evidence of Landau damping of ES-LHDW, suggesting that ES-LHDW may contribute to the generation of nonthermal electrons along the direction parallel to the magnetic field.

Magnetic reconnection↗