SEARCH · Search NASA

Results for “EVAPORATION RATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Brief Communication: A Simplified Approach to Transient Convective Droplet Evaporation and Burning

Empirical correlations for evaporation rates from single fuel droplets have existed since the 1930s. These correlations, which will be referred to in this article as Froessling/Ranz-Marshall types of correlations, are appropriate to the special cases of steady-state evaporation in the absence of chemical reaction. In a previous article by the authors, the quasi-steady evaporation and burning processes associated with a fuel drop in a convective environment are examined through a droplet model based on the boundary layer approach. For droplet Reynolds numbers of practical interest, this model produces very reasonable steady state as well as quasi-time-dependent droplet simulations, requiring relatively short computational times and yielding good agreement with the above-mentioned empirical correlations. The steady-state case, however, is usually relevant to practical combustor situations only when the drop has reached a nearly uniform temperature since the heating process of the drop cannot be considered to be quasi-steady. In the present study, the transient heating process of the droplet interior during evaporation and/or burning is taken into account, and thus calculations pertaining to the entire life-time of the droplet are carried out. It is of particular interest here to obtain simplified correlations to describe the transient behavior of evaporating and burning droplets; these may be incorporated with greater ease into spray calculations. Accordingly, we have chosen to use stagnation conditions in the present model in a modification of the Froessling/Ranz-Marshall correlations. These modified correlations, incorporating an effective transfer number, produce a fairly accurate representation of droplet evaporation and burning, while requiring only one tenth the computational effort used in a full boundary layer solution.

Madooglu, K.↗

NASA NTRS2005

GLACE: The Global Land-Atmosphere Coupling Experiment Part 2: Analysis

The twelve weather and climate models participating in the Global Land-Atmosphere Coupling Experiment (GLACE) show both a wide variation in the strength of land-atmosphere coupling and some intriguing commonalities. In this paper, we address the causes of variations in coupling strength - both the geographic variations within a given model and the model-to-model differences. The ability of soil moisture to affect precipitation is examined in two stages, namely, the ability of the soil moisture to affect evaporation, and the ability of evaporation to affect precipitation. Most of the differences between the models and within a given model are found to be associated with the first stage - an evaporation rate that varies strongly and consistently with soil moisture tends to lead to a higher coupling strength. The first stage differences reflect identifiable differences in model parameterization and model climate. Intermodel differences in the evaporation-precipitation connection, however, also play a key role.

Guo, Zhichang↗

NASA NTRS1981

Heat content and evolution of cometary nuclei

The heat flux into cometary nuclei at various distances from the sun, before and after perihelion, is investigated for both the isothermal case and that of the fixed subsolar point. It is found that the heat flux may be a large fraction of the incident total heat input, so that surface temperature and the associated evaporation rate are lower than usually calculated, and that the effect depends on the porosity of the nucleus. An ideal, initially spherical and homogeneous nucleus cannot remain isothermal, so that it must develop surface nonuniformities through localized phase changes, evaporation, and breakaway. The splitting of comets as far as 9 AU from the sun may be explained in terms of the heating of a CO2-rich inclusion in the nucleus.

Smoluchowski, R.↗

NASA NTRS1988

Convection effects in protein crystal growth

Protein crystals for X-ray diffraction study are usually grown resting on the bottom of a hanging drop of a saturated protein solution, with slow evaporation to the air in a small enclosed cell. The evaporation rate is controlled by hanging the drop above a reservoir of water, with its saturation vapor pressure decreased by a low concentration of a passive solute. The drop has a lower solute concentration, and its volume shrinks by evaporation until the molecular concentrations match. Protein crystals can also be grown from a seed crystal suspended or supported in the interior of a supersaturated solution. The main analysis of this report concerns this case because it is less complicated than hanging-drop growth. Convection effects have been suggested as the reason for the apparent cessation of growth at a certain rather small crystal size. It seeems that as the crystal grows, the number of dislocations increases to a point where further growth is hindered. Growth in the microgravity environment of an orbiting space vehicle has been proposed as a method for obtaining larger crystals. Experimental observations of convection effects during the growth of protein crystals have been reported.

Roberts, Glyn O.↗

NASA NTRS2002

Characteristics of Pool Boiling on Graphite-Copper Composite Surfaces

Nucleate pool boiling performance of different liquids on graphite-copper composite (Gr-Cu) surfaces has been experimentally studied and modeled. Both highly wetting fluids, such as freon-113 and pentane, and a moderately wetting fluid (water) were tested on the Gr-Cu surfaces with different graphite-fiber volume fractions to reveal the enhancement effects of the composite surfaces on the nucleate pool boiling. Results of the experiments show that the graphite-fiber volume fraction has an optimum value. The Gr-Cu composite surface with 25 percent graphite-fiber volume (f=0.25) has a maximum enhancement effect on the nucleate boiling heat transfer comparing to the pure copper surface. For the highly wetting fluid, the nucleate boiling heat transfer is generally enhanced on the Gr- Cu composite surfaces by 3 to 6 times shown. In the low heat flux region, the enhancement is over 6 times, but in the high heat flux region, the enhancement is reduced to about 40%. For the moderately wetting fluid (water), stronger enhancement of nucleate boiling heat transfer is achieved on the composite surface. It shown the experimental results in which one observes the nucleate boiling heat transfer enhancement of 5 to 10 times in the low heat flux region and an enhancement of 3 to 5 times in the high heat flux region. Photographs of bubble departure during the initial stage of nucleate boiling indicate that the bubbles detached from the composite surface are much smaller in diameter than those detached from the pure copper surface. Typical photographs are presented.It shows that the bubbles departed from the composite surface have diameters of only O(0.1) mm, while those departed from the pure copper surface have diameters of O(1) mm. It is also found that the bubbles depart from the composite surface at a much higher frequency, thus forming vapor columns. These two phenomena combined with high thermal conductivity of the graphite fiber are considered the mechanisms for such a significant augmentation in nucleate boiling heat transfer on the composite surfaces. A physical model is developed to describe the phenomenon of bubble departure from the composite surface: The preferred site of bubble nucleation is the fiber tip because of higher tip temperature than the surrounding copper base and poor wettability of the graphite tip compared with that of the base material (copper). The high evaporation rate near the contact line produces the vapor cutback due to the vapor recoil pushing the three-phase line outwards from the fiber tip, and so a neck of the bubble is formed near the bubble bottom. Evaporation and surface tension accelerate the necking process and finally result in the bubble departure while a new small bubble is formed at the tip when the surface tension pushes the three-phase line back to the tip. The process is schematically shown. The proposed model is based on and confirmed by experimental results.

Zhang, Nengli↗

DOE OSTI2023

Physical vapor deposition simulator by graphical processor unit ray casting

This paper presents fast, accurate software for modeling physical vapor deposition systems over irregular surfaces. The model is implemented using graphics processing unit (GPU) ray casting. Applied models are viewed as a cross section of the area of interest. Given evaporation rate, time, and angular profiles in a vacuum system, an iterative time-step approach for calculating deposition profiles is calculated in the GPU architecture following a ballistic modeling approach. Thin-film technologies for the electronics industry will require evaporations on complex surfaces. Depending on the nature of the surface, a uniform thin film across the topology is wanted for various device parameters. The ray casting method is tested against various profiles. The code is freely distributed on GitHub (see https://github.com/adam-r-thomas/PVDS).

Engineering↗

DOE OSTI2022

Self-organized patterns at the plasma–liquid anode interface in a helium glow discharge: temporal development and mechanisms

Self-organization at the plasma–liquid anode interface is a commonly observed phenomenon for atmospheric pressure glow plasmas, resulting in patterns with distinctive shapes such as circular ring, star-shaped, and gear-like structures, depending primarily on the discharge current and solution conductivity. Recent studies have shown that the electrode gap distance, solute used for liquid anode solution, and gas composition can also significantly impact pattern formation. Nonetheless, an overarching model or explanation of the key underlying mechanisms consistent with all experimentally observed trends is not yet reported. We propose a key underlying mechanism enabling pattern formation motivated by a detailed parametric study of pattern formation complemented by the temporal development of patterns and consistent with all observed trends. Pattern formation was observed to be on a time scale of 100 μs, similar to the time scales of gas heating and evaporation. It was found that a minimum water evaporation rate of (3.5 ± 0.5) × 10 –6 kg s –1 and reduced electric field in the positive column of 16.6 ± 0.4 Td is required for pattern formation in the investigated cases irrespective of solution conductivity and gas composition for NaCl solutions. Nonetheless, the presence of cations for which the corresponding metal atom has a low ionization energy was identified as a necessary condition for pattern formation. Furthermore, the reported results suggest that the presence of a small amount of metal atoms in the gas phase with low ionization energy enhances the overall ionization rate in the near anode region which triggers pattern formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Estimating Future Surface Water Availability Through an Integrated Climate‐Hydrology‐Management Modeling Framework at a Basin Scale Under CMIP6 Scenarios

Abstract Climate change and increasing water demand due to population growth pose serious threats to surface water availability. The biggest challenge in addressing these threats is the gap between climate science and water management practices. Local water planning often lacks the integration of climate change information, especially with regard to its impacts on surface water storage and evaporation as well as the associated uncertainties. Using Texas as an example, state and regional water planning relies on the use of reservoir “Firm Yield” (FY)—an important metric that quantifies surface water availability. However, this existing planning methodology does not account for the impacts of climate change on future inflows and on reservoir evaporation. To bridge this knowledge gap, an integrated climate‐hydrology‐management (CHM) modeling framework was developed, which is generally applicable to river basins with geographical, hydrological, and water right settings similar to those in Texas. The framework leverages the advantages of two modeling approaches—the Distributed Hydrology Soil Vegetation Model (DHSVM) and Water Availability Modeling (WAM). Additionally, the Double Bias Correction Constructed Analogues method is utilized to downscale and incorporate Coupled Model Intercomparison Project Phase 6 GCMs. Finally, the DHSVM simulated naturalized streamflow and reservoir evaporation rate are input to WAM to simulate reservoir FY. A new term—“Ratio of Firm Yield” (RFY)—is created to compare how much FY changes under different climate scenarios. The results indicate that climate change has a significant impact on surface water availability by increasing reservoir evaporation, altering the seasonal pattern of naturalized streamflow, and reducing FY.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1988

Transient heat transfer from shrinking LOX-drop

In order to achieve prescribed experimental conditions in wind tunnels, the nitrogen-oxygen mixture is enriched by injection of liquid oxygen (LOX) upstream of methane burners. The objective of the study is to determine the LOX drop evaporation rate, which is dominated by heat transfer from the air stream (mass transfer mechanism can be later coupled with the solution from the present work). Since the concentration of drops in the surrounding gas is quite high, the concept of infinite medium cannot be utilized. Drop evaporation, as part of system's mass balance, is an important source-term in the finite-difference 2/3-dimensional network terms of laboratory-system (Eulerian) coordinates, while individual drop behavior, including its thermal history, is analyzed in Lagrangian coordinates.

Kondic, Nenad N.↗

NASA NTRS1992

Numerical analysis of bipropellant combustion in liquid thrust chambers by an Eulerian-Eulerian approach

The liquid thrust chambers performance (LTCP) code is used for parametric studies of flow and combustion in liquid rocket engines. Multiphase flow equations are solved in an Eulerian-Eulerian framework, and multistep finite rate chemistry is incorporated. The discretization scheme is fully implicit and is based on the total variation diminishing (TVD) scheme, which is accurate, robust, very efficient and capable of handling steep gradients and stiff chemistry. Effects of injection velocity and chamber size have been considered, and the effect of group combustion on the evaporation rate has been studied for a dense spray.

Dang, A. L.↗

NASA NTRS1975

A study of molecular contamination

Contamination kinetics of typical space materials were studied using several techniques, including ellipsometry. Data were obtained on contaminant deposition rates, sticking coefficients, and reevaporation of the contamination. Materials studied included silicone sealants, a thermal control paint, and a graphite laminate as contaminant sources, and gold coated surfaces, a thermal control paint and a second surface mirror material as the contaminees. Both deposition and reevaporation rates were found to be nonlinear with time, and followed an exponential decay. A hypothesis is presented that the nonlinear behavior was a result of disproportionation of the molecular weight fractions of the polymers. The measured sticking coefficients were found to vary substantially with temperature over narrow ranges. Simulated space radiation was found to reduce the evaporation rates of contaminants by several orders of magnitude.

Allen, T. H.↗

NASA NTRS1993

Evaporation of LOX under supercritical and subcritical conditions

The evaporation of LOX under supercritical and subcritical conditions was studied experimentally and theoretically. In experiments, the evaporation rate and surface temperature were measured for LOX strand vaporizing in helium environments at pressures ranging from 5 to 68 atmospheres. Gas sampling and chromatography analysis were also employed to profile the gas composition above the LOX surface for the purpose of model validation. A comprehensive theoretical model was formulated and solved numerically to simulate the evaporation process of LOX at high pressures. The model was based on the conservation equations of mass, momentum, energy, and species concentrations for a multicomponent system, with consideration of gravitational body force, solubility of ambient gases in liquid, and variable thermophysical properties. Good agreement between predictions and measured oxygen mole fraction profiles was obtained. The effect of pressure on the distribution of the Lewis number, as well as the effect of variable diffusion coefficient, were further examined to elucidate the high-pressure transport behavior exhibited in the LOX vaporization process.

Yang, A. S.↗

NASA NTRSDate not supplied

Validation of Accurate Cryogenic Fluid Vapor-Liquid Boundary Conditions Via Molecular Simulations

Vapor-liquid interfaces drive many important phenomena in cryogenic fluid management, including heat transfer, evaporation, and capillary flow. Design of cryogenic fluid systems, such as propellant storage, requires accurate predictions of fluid behavior, including evaporation rates. Many models have been proposed for heat and mass transfer at vapor liquid interfaces, but the accuracy of these models in the context of cryogenic fluids has not been performed. We use molecular dynamics simulations, which allow for nanometer scale resolution of fluid phenomena, to evaluate the accuracy of a variety of vapor-liquid boundary conditions at evaporating and condensing interfaces. We find that an anisotropic temperature distribution is a critical ingredient for accurate prediction of intensive evaporation and condensation.

Daniel Vigil↗

NASA NTRS1989

The impact of summer rainfall on the temperature gradient along the United States-Mexico border

The international border running through the Sonoran Desert in southern Arizona and northern Sonora is marked by a sharp discontinuity in albedo and grass cover. The observed differences in surface properties are a result of long-term, severe overgrazing of the Mexican lands. Recently, investigators have shown the Mexican side of the border to have higher surface and air temperatures when compared to adjacent areas in the United State. The differences in temperatures appear to be more associated with differential evapotranspiration rates than with albedo changes along the border. In this study, the impact of summer rainfall on the observed seasonal and daily gradient in maximum temperature is examined. On a seasonal time scale, the temperature gradient increases with higher moisture levels, probably due to a vegetative response on the United States' side of the border; at the daily level, the gradient in maximum temperature decreases after a rain event as evaporation rates equalize between the countries. The results suggest that temperature differences between vegetated and overgrazed landscapes in arid areas are highly dependent upon the amount of moisture available for evapotranspiration.

Balling, Robert C., Jr.↗

DOE OSTI2021

Modelling the interlayer bond strength of 3D printed concrete with surface moisture

Highlights: • An analytical model for interlayer adhesion of 3DPC is proposed based on the amount of surface moisture on the interlayer. • For this mix, the model accurately (RMSE=2.5%) predicts the reduction in interlayer adhesion from 30% to 50%. • Internal curing with superabsorbent polymers increases the interlayer adhesion by 10% and flexural strength by 19%. • SAPs also improve the initial thixotropy by 49% and buildability by 25% compared to the reference. Providing additional water to the hydrating cementitious particles is essential to achieve the optimal mechanical performance of the low w/b concrete mixes preferred for 3D printing. This study incorporates superabsorbent polymers (SAP) and additional water in 3D printed concrete (3DPC) to promote the hydration process through delayed internal water release. The study shows that a retentive SAP modifies the rheological development by absorbing the pore fluid for a short period after printing. The absorption-induced stiffening increases the thixotropy and buildability by 49% and 25%, respectively. A retentive SAP increases the flexural strength and interlayer adhesion by 19% and 10%, respectively. This is due to the internal water release that promotes hydration. Evaporation of the interlayer moisture during the pass time has the opposite effect— evaporation reduces the interlayer adhesion. Based on this assumption, an analytical model is proposed. The model accounts for the pass time, bleeding, and the environmental evaporation rate to estimate the surface moisture and predict the lack of interlayer adhesion. In this study, the model accurately (RMSE = 2.5%) predicted an interlayer adhesion reduction from 30% to 50%. The interlayer adhesion results of other studies could also be predicted.

36 MATERIALS SCIENCE↗

NASA NTRS1981

Radiative transfer in cometary dust atmospheres: Critique of recent developments

The gas and dust production rates of comets near the sun are intimately linked to the fate of the solar radiation as it is scattered and partially absorbed by the cometary dust envelope or halo surrounding the comet's nucleus. The radiation of nuclear matter (mostly water ice) and the release of dust particles embedded in the ice which are entrained by the escaping gas and subsequently form a dust atmosphere or halo. On the other hand, the interaction of the dust cloud with the solar radiation is in turn responsible for the amount of radiative energy received by the nucleus and thus determines the evaporation rate. It is shown that recent attempts to formulate this problem quantitatively are in error. The correct formulation is given and it is pointed out that negative extinction (enhancement of the primary radiation received by the nucleus due to multiple scattering) may not be as large as predicted.

Vonroos, O.↗

DOE OSTI2022

Singularities in the gravitational capture of dark matter through long-range interactions

Here, we re-examine the gravitational capture of dark matter (DM) through long-range interactions. We demonstrate that neglecting the thermal motion of target particles, which is often a good approximation for short-range capture, results in parametrically inaccurate results for long-range capture. When the particle mediating the scattering process has a mass that is small in comparison to the momentum transfer in scattering events, correctly incorporating the thermal motion of target particles results in a quadratic, rather than logarithmic, sensitivity to the mediator mass, which substantially enhances the capture rate. We quantitatively assess the impact of this finite temperature effect on the captured DM population in the Sun as a function of mediator mass. We find that capture of DM through light dark photons, as in e.g. mirror DM, can be powerfully enhanced, with self-capture attaining a geometric limit over much of parameter space. For visibly-decaying dark photons, thermal corrections are not large in the Sun, but may be important in understanding long-range DM capture in more massive bodies such as Population III stars. We additionally provide the first calculation of the long-range DM self-evaporation rate.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Integrated Evaporator for Efficient Solar-Driven Interfacial Steam Generation

Solar-driven interfacial steam generation is a promising technique for clean water production as it can minimize thermal loss by localizing solar-to-heat conversion at the air/liquid interface. Here we report an integrated solar-evaporator by partially growing two-dimensional polypyrrole microsheets within a melamine foam through chemical vapor polymerization. These microsheets can induce multiple light reflections within the foam, enable omnidirectional light absorption, provide abundant surfaces to promote heat transfer, and achieve spatially-defined hydrophobicity to facilitate vapor escape. Meanwhile, the inherent hydrophilicity of the bottom part of the foam promotes spontaneous upward water transport and suppresses heat loss. The composite foam exhibits an excellent apparent evaporation rate of ~2 kg/(m 2 ·h) and solar-to-vapor efficiency of ~91%. Here, the combined advantages of large surface area, high efficiency, low cost, all weather application, excellent durability, and scalable manufacturing make our integrated design promising for fabricating large-scale solar steam generation systems that are suitable for practical clean water production.

36 MATERIALS SCIENCE↗