Search NASA⌕ Search

SEARCH · Search NASA

Results for “Earth trailing orbit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

A candidate for the parent body of the Taurid complex and its search ephemeris

Untypical asteroid 5025 P-L, with its perihelion close to the orbit of Mercury and its aphelion between the orbits of Jupiter and Saturn, seems to be a good candidate for the parent body of the Taurid complex of small interplanetary objects. Evidence that this asteroid is a major source of meteoroids as well as an analysis of the orbits of asteroidal and cometary members of the Taurid complex, lead to the conclusion that 5025 P-L might be regarded as a remnant of a giant comet which was a progenitor of the overall complex according to the hypothesis of Clube and Napier. Unfortunately, the orbit of 5025 P-L is very poorly determined because the computations were based upon only three positional observations over an arc of only four days in October 1960. Any further research on the problem of origin and evolution of the Taurid complex needs better determined orbit of this key asteroid. Therefore its new positions are necessary. In order to enable the search of eventual trails of 5025 P-L on plates which can be found in archives, its ephemeris for the opposition in 1960, when the asteroid passed about 0.5 AU from the Earth, is presented.

Ziolkowski, Krzysztof↗
NASA NTRS1972

Interaction of the solar wind with the moon.

During its orbit about the earth, the moon is located in the interplanetary medium or in the geomagnetosheath-geomagnetotail formed by the solar wind interaction with earth. In the tail, no evidence is found for a lunar magnetic field. In the interplanetary medium, no evidence exists for a bow shock or a trailing shock, although a well defined plasma wake region is observed in the anti-solar wind direction. The moon absorbs the solar wind plasma that strikes its surface and creates a void region or cavity in the flow. The observed lunar Mach cone gives evidence for the anisotropic propagation of waves in the magnetized collisionless warm plasma of the solar wind. The transmission of microstructural discontinuities in the interplanetary medium past the moon shows little distortion, indicating a low effective electrical conductivity of the lunar body. Fluctuations of the interplanetary magnetic field upstream from the plasma wake are stimulated by the disturbed conditions in that region. The moon behaves like a cold, nonmagnetic, fully absorbing dielectric sphere in the solar wind flow.

Ness, N. F.↗
NASA NTRS1984

Voyager photometry of Rhea, Dione, Tethys, Enceladus and Mimas

Voyager imaging observations provide new photometric data on Saturn's satellites at large phase angles (up to 133 deg in the case of Mimas) not observable from earth. Significant new results include the determination of phase integrals ranging from 0.7 in the case of Rhea to 0.9 for Enceladus. For Enceladus an average geometric albedo 1.04 and a Bond albedo of 0.9 are found. The data indicate an orbital lightcurve with an amplitude of 0.2 mag, the trailing side being the brighter. For Mimas, the lightcurve amplitude is probably less than 0.1 mag. The value of the geometric albedo of Mimas reported here, is definitely higher than the currently accepted value of about 0.5. For Dione, the Voyager data show a well-defined orbital lightcurve of amplitude about 0.6 mag, with the leading hemisphere brighter than the trailing one.

Buratti, B.↗
NASA NTRS1984

Laboratory degradation of Kapton in a low energy oxygen ion beam

An atomic oxygen ion beam, accelerated from a tunable microwave resonant cavity, was used at Lewis Research Center to bombard samples of the widely used polyimide Kapton. The Kapton experienced degradation and mass loss at high rates, which may be comparable to those found in Space Shuttle operations if the activation energy supplied by the beam enabled surface reactions with the ambient oxygen. The simulation reproduced the directionality (ram-wake dependence) of the degradation, the change in optical properties of the degraded materials, and the structure seen in scanning electron micrographs of samples returned on the Shuttle Trails with a substituted argon ion beam produced no rapid degradation. Energy Dispersive X-ray Analysis (EDAX) showed significant surface composition changes in all bombarded samples. Mass loss rates and surface composition changes are discussed in terms of the possible oxidation chemistry of the interaction. Finally, the question of how the harmful degradation of materials in low Earth orbit can be minimized is addressed.

Ferguson, D. C.↗
NASA NTRS1983

Laboratory degradation of Kapton in a low energy oxygen ion beam

An atomic oxygen ion beam, accelerated from a tunable microwave resonant cavity, was used at Lewis Research Center to bombard samples of the widely used polyimide Kapton. The Kapton experienced degradation and mass loss at high rates, which may be comparable to those found in Space Shuttle operations if the activation energy supplied by the beam enabled surface reactions with the ambient oxygen. The simulation reproduced the directionality (ram-wake dependence) of the degradiation, the change in optical properties of the degraded materials, and the structure seen in scanning electron micrographs of samples returned on the Shuttle Trails with a substituted argon ion beam produced no rapid degradation. Energy Dispersive X-ray Analysis (EDAX) showed significant surface composition changes in all bombarded samples. Mass loss rates and surface composition changes are discussed in terms of the possible oxidation chemistry of the interaction. Finally, the question of how the harmful degradation of materials in low earth orbit can be minimized is addressed.

Ferguson, D. C.↗
NASA NTRS2018

Tour Design Techniques for the Europa Clipper Mission

Europa is one of the most scientifically interesting targets of the solar system, as it may possess the three necessary ingredients for life: an extensive ocean of liquid water, an energy source from tidal heating, and a suite of biogenic elements. To explore the habitability of Europa, NASA is developing the Europa Clipper mission, currently scheduled to be launched in 2022. Europa resides deep inside the gravity well of Jupiter, in a region of the magnetosphere with many trapped ionized particles that get accelerated to near relativistic speeds; a Europa orbiter mission would require a large amount of ∆V for an orbit insertion maneuver, and would only return limited science data before being critically exposed to radiation. To mitigate these issues, Europa Clipper instead only utilizes Europa flybys, connected by Europa-resonant and non-resonant orbits. Science data is collected during high-radiation passes, and returned to Earth during the rest of the Jovian orbits, at a much lower radiation dose exposure. This paper will present several tour tools techniques developed for the design of the Europa Clipper flyby trajectory. In particular, the paper will describe different ways to perform fast line-of-apsides rotations; a new approach to improve the coverage of Europa’s trailing and leading edges, with the lighting conditions considerations; parametric studies of the expected radiation dose and time-of-flight as function of the Europa resonance; and a quick way to estimate the radiation dose for Jovian tours. Other techniques, that were already presented in previous papers, will be reviewed for completeness. We then implement some of the new approaches in the 18F17 tour.

Pellegrini, Etienne↗
NASA NTRS1995

Exposure of LDEF materials to atomic oxygen: Results of EOIM 3

The third Effects of Oxygen Atom Interaction with Materials (EOIM 3) experiment flew on STS-46 from July 31 to August 8, 1992. The EOIM-3 sample tray was exposed to the low-earth orbit space environment for 58.55 hours at an altitude of 124 nautical miles resulting in a calculated total atomic oxygen (AO) fluence of 1.99 x 10(exp 20) atoms/sq cm. Five samples previously flown on the Long Duration Exposure Facility (LDEF) Experiment M0003 were included on the Aerospace EOIM 3 experimental tray: (1) Chemglaze A276 white thermal control paint from the LDEF trailing edge (TE); (2) S13GLO white thermal control paint from the LDEF TE; (3) S13GLO from the LDEF leading edge (LE) with a visible contamination layer from the LDEF mission; (4) Z306 black thermal control paint from the LDEF TE with a contamination layer from the LDEF mission; and (5) anodized aluminum from the LDEF TE with a contamination layer from the LDEF mission. The purpose of this experiment was twofold: (l) investigate the response of trailing edge LDEF materials to atomic oxygen exposure, thereby simulating LDEF leading edge phenomena; (2) investigate the response of contaminated LDEF samples to atomic oxygen in attempts to understand LDEF contamination-atomic oxygen interactions. This paper describes the response of these materials to atomic oxygen exposure, and compares the results of the EOIM 3 experiment to the LDEF mission and to ground-based atomic oxygen exposure studies.

Jaggers, C. H.↗
NASA NTRS1993

Long-term microparticle flux variability indicated by comparison of Interplanetary Dust Experiment (IDE) timed impacts for LDEF's first year in orbit with impact data for the entire 5.77-year orbital lifetime

The electronic sensors of the Interplanetary Dust Experiment (IDE) recorded precise impact times and approximate directions for submicron to approximately 100 micron size particles on all six primary sides of the spacecraft for the first 346 days of the LDEF orbital mission. Previously-reported analyses of the timed impact data have established their spatio-temporal features, including the demonstration that a preponderance of the particles in this regime are orbital debris and that a large fraction of the debris particles are encountered in megameter-size clouds. Short-term fluxes within such clouds can rise several orders of magnitude above the long-term average. These unexpectedly large short-term variations in debris flux raise the question of how representative an indication of the multi-year average flux is given by the nearly one year of timed data. One of the goals of the IDE was to conduct an optical survey of impact sites on detectors that remained active during the entire LDEF mission, to obtain full-mission fluxes. We present here the comparisons and contrasts among the new IDE optical survey impact data, the IDE first-year timed impact data, and impact data from other LDEF micrometeoroid and debris experiments. The following observations are reported: (1) the 5.77 year long-term integrated microparticle impact fluxes recorded by IDE detectors matched the integrated impact fluxes measured by other LDEF investigators for the same period; (2) IDE integrated microparticle impact fluxes varied by factors from 0.5 to 8.3 for LDEF days 1-346, 347-2106 and 1-2106 (5.77 years) on rows 3 (trailing edge, or West), 6 (South side), 12 (North side), and the Earth and Space ends; and (3) IDE integrated microparticle impact fluxes varied less than 3 percent for LDEF days 1-346, 347-2106 and 1-2106 (5.77 years) on row 9 (leading edge, or East). These results give further evidence of the accuracy and internal consistency of the recorded IDE impact data. This leads to the further conclusion that the utility of long-term ratios for impacts on various sides of a stabilized satellite in low Earth orbit (LEO) is extremely limited. These observations and their consequences highlight the need for continuous, real time monitoring of the dynamic microparticle environment in LEO.

Simon, Charles G.↗
NASA NTRS1992

Space environmental effects on LDEF composites: Leading graphite/epoxy panel, selected trailing edge specimens

The composite electronics-module cover for the leading edge (row D9) experiment M0003-8 was fabricated from T300 graphite/934 epoxy unidirectional prepreg tape in a multi-oriented layup. This panel contained thermal control coatings in three of the four quadrants with the fourth quadrant left uncoated as a control. The composite experienced different thermal cycling extremes in each quadrant due to the differing optical properties of the coatings. Results will be presented on microcracking and other Low Earth Orbital (LEO) effects on the coated panel substrate.

Dursch, Harry↗
NASA NTRS1983

The effect of atmospheric drag on the design of solar-cell power systems for low Earth orbit

The feasibility of reducing the atmospheric drag of low orbit solar powered satellites by operating the solar-cell array in a minimum-drag attitude, rather than in the conventional Sun pointing attitude was determined. The weights of the solar array, the energy storage batteries, and the fuel required to overcome the drag of the solar array for a range of design life times in orbit were considered. The drag of the array was estimated by free molecule flow theory, and the system weights were calculated from unit weight estimates for 1990 technology. The trailing, minimum drag system was found to require 80% more solar array area, and 30% more battery capacity, the system weights for reasonable life times were dominated by the thruster fuel requirements.

Kyser, A. C.↗
NASA NTRS1993

Retrievable payload carrier, next generation Long Duration Exposure Facility: Update 1992

Access to space and cost have been two major inhibitors of low Earth orbit research. The Retrievable Payload Carrier (RPC) Program is a commercial space program which strives to overcome these two barriers to space experimentation. The RPC Program's fleet of spacecraft, ground communications station, payload processing facility, and experienced integration and operations team will provide a convenient 'one-stop shop' for investigators seeking to use the unique vantage point and environment of low Earth orbit for research. The RPC is a regularly launched and retrieved, free-flying spacecraft providing resources adequate to meet modest payload/experiment requirements, and presenting ample surface area, volume, mass, and growth capacity for investigator usage. Enhanced capabilities of ground communications, solar-array-supplied electrical power, central computing, and on-board data storage pick up on the path where NASA's Long Duration Exposure Facility (LDEF) blazed the original technology trail. Mission lengths of 6-18 months, or longer, are envisioned. The year 1992 was designated as the 'International Space Year' and coincides with the 500th anniversary of Christopher Columbus's voyage to the New World. This is a fitting year in which to launch the full scale development of our unique shop of discovery whose intent is to facilitate retrieving technological rewards from another new world: space. Presented is an update on progress made on the RPC Program's development since the November 1991 LDEF Materials Workshop.

Perry, A. T.↗
NASA NTRS1992

Elemental Analyses of Hypervelocity Microparticle Impact Sites on Interplanetary Dust Experiment Sensor Surfaces

The Interplanetary Dust Experiment (IDE) had over 450 electrically active ultra-high purity metal-oxide-silicon impact detectors located on the six primary sides of the Long Duration Exposure Facility (LDEF). Hypervelocity microparticles (approximately 0.2 to approximately 100 micron diameter) that struck the active sensors with enough energy to breakdown the 0.4 or 1.0 micron thick SiO2 insulator layer separating the silicon base (the negative electrode), and the 1000 A thick surface layer of aluminum (the positive electrode) caused electrical discharges that were recorded for the first year of orbit. The high purity Al-SiO2-Si substrates allowed detection of trace (ppm) amounts of hypervelocity impactor residues. After sputtering through a layer of surface contamination, secondary ion mass spectrometry (SIMS) was used to create two-dimensional elemental ion intensity maps of microparticle sites on the IDE sensors. The element intensities in the central craters of the impacts were corrected for relative ion yields and instrumental conditions and then normalized to silicon. The results classification resulted from the particles' origins as 'manmade', 'natural', or 'indeterminate'. The last classification resulted from the presence of too little impactor residue, analytical interference from high background contamination, the lack of information on silicon and aluminum residues, or a combination of these circumstances. Several analytical 'blank' discharges were induced on flight sensors by pressing down on the sensor surface with a pure silicon shard. Analyses of these blank discharges showed that the discharge energy blasts away the layer of surface contamination. Only Si and Al were detected inside the discharge zones, including the central craters, of these features. Thus far, a total of 79 randomly selected microparticle impact sites from the six primary sides of the LDEF were analyzed: 36 from tray C-9 (Leading (ram), or east, side), 18 from tray C-3 (Trailing (wake), or west, side), 12 from tray B-12 (north side), 4 from tray D-6 (south side), 3 from tray H-11 (space end), and 6 from tray G-10 (earth end). Residue from manmade debris was identified in craters on all trays (aluminum oxide particle residues were not detectable on the Al/Si substrates). These results were consistent with the IDE impact record which showed highly variable long term microparticle impact flux rates on the west, space, and Earth sides of the LDEF which could not be ascribed to astronomical variability of micrometeorite density. The IDE record also showed episodic bursts of microparticle impacts on the east, north, and south sides of the satellite, denoting passage through orbital debris clouds or rings.

Simon, C. G.↗
NASA NTRS1993

Elemental analyses of hypervelocity microparticle impact sites on Interplanetary Dust Experiment sensor surfaces

The Interplanetary Dust Experiment (IDE) had over 450 electrically active ultra-high purity metal-oxide-silicon impact detectors located on the six primary sides of the Long Duration Exposure Facility (LDEF). Hypervelocity microparticles (approximately 0.2 to approximately 100 micron diameter) that struck the active sensors with enough energy to break down the 0.4 or 1.0 micron thick SIO2 insulator layer separating the silicon base (the negative electrode), and the 1000 A thick surface layer of aluminum (the positive electrode) caused electrical discharges that were recorded for the first year of orbit. The high purity Al-SiO2-Si substrates allowed detection of trace (ppm) amounts of hypervelocity impactor residues. After sputtering through a layer of surface contamination, secondary ion mass spectrometry (SIMS) was used to create two-dimensional elemental ion intensity maps of microparticle impact sites on the IDE sensors. The element intensities in the central craters of the impacts were corrected for relative ion yields and instrumental conditions and then normalized to silicon. The results were used to classify the particles' origins as 'manmade,' 'natural,' or 'indeterminate.' The last classification resulted from the presence of too little impactor residue, analytical interference from high background contamination, the lack of information on silicon and aluminum residues, or a combination of these circumstances. Several analytical 'blank' discharges were induced on flight sensors by pressing down on the sensor surface with a pure silicon shard. Analyses of these blank discharges showed that the discharge energy blasts away the layer of surface contamination. Only Si and Al were detected inside the discharge zones, including the central craters of these features. Thus far a total of 79 randomly selected microparticle impact sites from the six primary sides of the LDEF have been analyzed: 36 from tray C-9 (Leading (ram), or East, side), 18 from tray C-3 (Trailing (wake), or West, side), 12 from tray B-12 (North side), 4 from tray D-6 (South side), 3 from tray H-11 (Space end), and 6 from tray G-10 (Earth end). Residue from manmade debris was identified in craters on all trays. (Aluminum oxide particle residues were not detectable on the Al/Si substrates.) These results were consistent with the IDE impact record which showed highly variable long term microparticle impact flux rates on the West, Space and Earth sides of the LDEF which could not be ascribed to astronomical variability of micrometeorite density. The IDE record also showed episodic bursts of microparticle impacts on the East, North, and South sides of the satellite, denoting passage through orbital debris clouds or rings.

Simon, Charles G.↗
NASA NTRS1984

Planet-crossing asteroid survey

The planet-crossing asteroid survey was begun in 1973 in order to study those asteroids which may intersect the orbits of the inner planets. Throughout the history of the survey, many of the various classes of asteroids were investigated. The near-Earth objects including the Apollo, Amor, and Aten families were studied in addition to asteroids whose orbits cross that of Mars, and some objects which are generally confined to the main belt. Observing was done on the 18 inch Schmidt telescope at the Palomar Mtn. Observatory. Typically, two consecutive photographs of a favorable field are taken. The exposure times of the films are usually twenty minutes and ten minutes, respectively. The telescope is guided at sidereal rate, so that asteroids will leave short trailed images. The films are then scanned for trails. By comparing the two films, the direction and approximate rate of motion of an asteroid may be determined.

Wilder, P. D.↗
NASA NTRS1992

Absorbed dose measurements and predictions on LDEF

The overall radiation environment of LDEF was determined in part through the use of thermoluminescent detectors (TLDs). The results given are from four experiments (Biostack, Fiber Optics Data Link, Seeds in Space, and Linear Energy Transfer Spectrum Measurement) and represent a large fraction of existing absorbed dose data. The TLDs (located on leading and trailing edges) were under various shielding depths. The measured absorbed doses were found to reflect both directional dependence of incident trapped protons and shielding. Radiation dosages at both locations and under various shielding depths are given. The effect of the trapped proton anisotropy was such that the western side of LDEF received about 3 times the dose of the eastern side at shielding depths of approx. 1 gm/sq cm. These data are being used to evaluate the accuracy of models currently in use for predicting ionizing radiation environments for low Earth orbit missions.

Frank, A. L.↗
NASA NTRS1993

LDEF fiber-composite materials characterization

Degradation of a number of fiber/polymer composites located on the leading and trailing surfaces of LDEF where the atomic oxygen (AO) fluences ranged from 10(exp 22) to 10(exp 4) atoms/cm(sup 2), respectively, was observed and compared. While matrices of the composites on the leading edge generally exhibited considerable degradation and erosion-induced fragmentation, this 'asking' process was confined to the near surface regions because these degraded structures acted as a 'protective blanket' for deeper-lying regions. This finding leads to the conclusion that simple surface coatings can significantly retard AO and other combinations of degrading phenomena in low-Earth orbit. Micrometeoroid and debris particle impacts were not a prominent feature on the fiber composites studied and apparently do not contribute in a significant way to their degradation or alteration in low-Earth orbit.

Miglionico, C. J.↗
NASA NTRS1994

Further analysis of remnants found in LDEF and Mir impact craters

This study is the further investigation of space-exposed samples recently recovered from the American satellite LDEF and the Franco-Soviet Mir 'Aragatz' experiment. Some interesting impact features have been selected as examples to demonstrate various findings. Part of the objective of the experiments was to determine the nature and origin of particles in low earth orbit (LEO). Observations show that the 'multiple foil detectors' appear to be an effective way of retaining impactor residues of larger particles. They provide a 'witness' foil that shows the shape and dimensions of the impacting particle. Several low-velocity (less than 4 km/s) oblique craters containing significant quantities of impactor residue have been identified. Energy dispersive spectrometer (EDS) analyses of the residues show evidence of micrometeoroid and debris compositions. Similarities between the meteoroid signatures and those of Brownlee particles have been noted. Evidence of at least two different grain compositions in one impacting particle is shown. The discovery of debris impacts on the trailing edge of LDEF demonstrates that artificial debris may be found, not just in circular orbits, but also in elliptical orbits.

Berthoud, S. Lucinda↗
NASA NTRS1985

New results on the Pioneer Venus Orbiter February 10-11, 1982 events - A solar wind disturbance not a comet

The characteristics of a series of disturbances observed on February 10-11, 1982 by the plasma analyzer and the magnetometer on the Pioneer Venus Orbiter, obtained in the solar wind upstream of Venus are studied. It is concluded that the events were associated with the propagation of a solar wind disturbance of coronal origin and not with an encounter with a comet or other local outgassing object (Russel, et al., 1983). The plasma analyzer spectra clearly show the presence of increases in He(2) and they argue strongly against Russell, et al.'s interpretatation. The peak in magnetic field magnitude on February 11 is identified as the magnetic signature of a thin, trailing 'filament' at the end of a series of solar-initiated events. Corresponding increases in He(2) and magnetic field fluctuations were observed near earth by ISEE-3 about a day later, and this strongly supports the concept of a solar origin.

Intriligator, D. S.↗