Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ellipsometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Inferring relative dose-dependent color center populations in proton irradiated thoria single crystals using optical spectroscopy

In this work, we have utilized photoluminescence spectroscopy and optical ellipsometry to characterize the dose-dependence of the photoluminescence emission intensity and changes in optical absorption of thoria single crystals subject to irradiation with energetic protons at room- and elevated-temperatures. The photoluminescence peaks and the optical absorption bands are attributed to creation of new electronic states emerging from defects resulting from displacement damage. These bands are most likely associated with electrons trapped at the oxygen vacancy sites similar to color centers formed in other irradiated oxides and halides. Our experimental observations are supported by a standard density functional theory calculation of the electronic structure in pristine and oxygen vacancy-bearing thoria crystals. The dose-dependence of the intensity of the photoluminescence peaks is used to parameterize a rate theory model that estimates the concentration of color centers in the irradiated crystals. This parameterization provides optimized migration barrier parameters for oxygen interstitials and vacancies that simultaneously capture the optical response of the crystals irradiated at room- and elevated-temperature. These optical spectroscopy techniques offer a promising pathway to characterize the population of color centers formed at the sites of oxygen anion vacancies, particularly in irradiated nuclear fuels, where atomic-level defects cannot be readily imaged using electron microscopy. When combined with other direct and indirect characterization tools, our approach can provide new insight into defect formation and accumulation in energy materials over single atomic to extended length scales.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of an Optical Library for Coevaporated CdSe x Te 1– x

The conversion efficiency of CdTe solar cells may be improved by bandgap engineering, i.e., changing the bandgap value through the addition of Se in the absorber. The Se alloying enables a short-circuit current density improvement, as it leads to a bandgap energy value decrease. Furthermore, it has been associated with increased minority carrier lifetimes, assuring high open-circuit voltage values. An Se gradient profile control can further optimize the solar cell performance. Thus, an optical model baseline of the CdSe x Te 1–x (CST) compound was developed. Spectroscopic ellipsometry measurements were conducted to accurately extract the optical constants of ten CST layers deposited through coevaporation with x varying from 0 to 1. Using the measured dielectric function spectra from the discrete CST layers with varying x, and considering the composition-induced shift in the critical point energies, an energy-shift model was employed to develop the accurate optical library for the CST compound for any x value to provide data for future modeling and optimization. Furthermore, the library accuracy was validated through optical simulations of the quantum efficiency of a graded CST solar cell using the finite-difference time-domain method by replicating the Se profile in the absorber layer measured through secondary ion mass spectrometry.

14 SOLAR ENERGY↗
DOE OSTI2023

Comparison of methods to derive infrared optical constants for organic materials for optical modeling

Reflectance spectroscopy, especially at infrared wavelengths, is often used for contact, standoff, and remote sensing of solid materials. The reflectance spectra of solids, however, are complex, relying on many factors, even for the same material. Such phenomena can be modeled if the optical constants as a function of wavelength or wavenumber, n(?) and k(?), are known. Methods to measure the optical constants of solids, however, are challenging, particularly for powdered materials. For powdered materials, a pressed pellet of the neat material is often used when a crystalline specimen is not available. In this work, three techniques, including ellipsometry, single-angle reflectance and KBr transmission spectroscopy, are applied to an organic material, acetaminophen, for comparison, and the effects on the modeled spectra are shown.

ellipsometry, infrared (IR) spectroscopy, FTIR, hy↗
DOE OSTI2019

Optical Properties of Polyethylene Filled with Bi{sub 2}Te{sub 3} Nanocrystallites

Composite mixtures with various component concentrations are fabricated by the thermal pressing of low-density polyethylene and Bi{sub 2}Te{sub 3} in the powder-like state with a nanocrystal size of ~50 nm. These samples preliminarily characterized by X-ray diffractometry and Raman spectroscopy are investigated by spectroscopic ellipsometry in a photon energy range of 1–6 eV. The dielectric functions for composites with a nominal Bi{sub 2}Te{sub 3} weight concentration of 5, 10, 30, 40, 50, 60, and 70% are calculated based on the measured optical constants of polyethylene and the Bi{sub 2}Te{sub 3} crystal in the approximation of the Bruggeman effective medium. The analysis of depolarization features of reflected light makes it possible to establish the actual inhomogeneity of the composite samples under study caused by the clusterization of nanocrystallites with an increase in the Bi{sub 2}Te{sub 3} weight concentration in polyethylene and propose the most reliable optical model of the formed composites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Optical and Structural Properties of Ag and c-Si Nanostructures Formed During the Metal-Assisted Chemical Etching of Silicon

This study consisting of two parts is concerned with the features of the three-stage process of the metal-assisted chemical etching (MACE) of silicon. This process is used to fabricate silicon nanostructures. In the first part of this work, a layer of self-assembled Ag nanoparticles chemically deposited from a solution on the surface of single-crystal silicon (c-Si) (MACE stage 1) was studied, and the second part includes of investigation of Si nanostructures formed in stages 2 and 3. By means of spectroscopic ellipsometry (in the range of wavelengths λ = 250–900 nm), the pseudodielectric functions of the nanostructures were determined and compared for all the three stages of the MACE process. In addition, for the Si nanostructures, the parameters of layers (the thickness and void fraction) were calculated in the context of the multilayer optical model, with the use of Bruggeman’s effective-medium approximation and fitting procedures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Optical and Magneto-Optical Properties of Multilayer Nanosized [Co/TiO{sub 2}]{sub n} Films

Abstract—The optical and magneto-optical properties of the metal–dielectric multilayer [Co/TiO{sub 2}]{sub n} structures with 2–4-nm-thick layers prepared on a silicon substrate Si(001) by ion-beam deposition have been studied. The complex permittivity of multilayer [Co/TiO{sub 2}]{sub n} structures has been measured by the optical ellipsometry technique in the spectral range of 0.6–5.6 eV and analyzed using the optical reflection matrices for isotropic multilayer dielectric structures taking into account the optical losses and also using the method of anisotropic effective medium. The magneto-optical Kerr effect has been measured by the polarimetric technique in the spectral range of 1.2–4.5 eV in the polar and longitudinal geometries. The magnetic anisotropy type is determined on the base of the field dependences of the magneto-optical Kerr effect. It is found that the nanosized [Co/TiO{sub 2}]{sub n} structures can be considered as artificial optically uniaxial media with a strong magnetic and optical anisotropy at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

A Role of the 3d Electron Subsystem in the Evolution of Band Structure and Magnetic and Optical Properties of ErNi{sub 5 –} {sub x}Co{sub x} Compounds (x = 0–4)

The evolution of the electronic structure and optical and magnetic properties of ErNi{sub 5 –} {sub x}Co{sub x} compounds (x = 0–4), occurring upon substitution of nickel by cobalt atoms, has been investigated. Spin-polarization calculations of the band spectrum of these intermetallic compounds have been performed within the local spin density approximation with a correction for strong electron correlations in the 4f shell of a rare-earth ion (method LSDA+U). The values of magnetic moments for erbium, nickel, and cobalt ions (located at different crystallographic sites) are obtained. The exchange-interaction parameters for the 3d sublattice of transition metals are determined. The spectral properties of the compounds have been investigated in the wavelength range of 0.22–15 μm by optical ellipsometry. The experimental frequency dependences of the optical conductivity in the interband absorption region are compared with the corresponding characteristics calculated based on the density of electronic states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Studying Evolution of the Ensemble of Micropores in a SiC/Si Structure during Its Growth by the Method of Atom Substitution

The time evolution of the ensemble of micropores formed in the near-surface region of silicon during the growth of thin films of silicon carbide is studied by the method of atom substitution. SiC/Si samples are studied by scanning electron microscopy, ellipsometry, and confocal Raman microscopy. The formation of the porous layer involves several characteristic stages: the emergence of single pores, their growth with the formation of dendrite-like structures, and subsequent coalescence into a continuous layer. It is shown that the thickness of the porous layer at the initial stages of the growth is proportional to the cubic root of time. The possible mechanisms of pore formation are discussed and a theoretical model is proposed to describe the dependence of the average thickness of the porous layer on time. The model is in a good qualitative agreement with the experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Surface Topography and Optical Properties of Thin AlN Films Produced on GaAs (100) Substrate by Reactive Ion-Plasma Sputtering

A study of the surface topography and optical characteristics of thin AlN films used as passivating and antireflection coatings deposited on n-GaAs (100) substrates by reactive ion-plasma sputtering is reported. It was found that the process conditions affect the structure and the optical characteristics of the films, which makes it possible to obtain coatings with prescribed parameters. An analysis of the results furnished by ellipsometry and atomic-force microscopy of the surface shows that the refractive index of the films is correlated with the surface structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Improved Infrared Optical Constants from Pressed Pellets: II. Ellipsometric n and k Values for Ammonium Sulfate with Variability Analysis

Infrared spectral imaging is facilitated via the comparison of spectra recorded in situ to a databank of actual or synthetic infrared reflectance spectra. It has recently been shown that reference spectra corresponding to the many different morphological forms of the same chemical can be generated synthetically using the imaginary, k, and real, n, components of the complex refractive index, n~ = n + ik. One method to obtain the n and k vectors is infrared ellipsometry, which measures the changes in amplitude, tan ?, and phase, ?, of polarized light reflected from the sample both as a function of wavenumber and angle of incidence. The method requires specularly reflected light so best results are usually obtained with polished planar samples of large surface area. Due to the difficulties of obtaining such samples, however, we investigate the possibility of pressing powders of neat materials and obtaining the corresponding optical constants from the pellets. In this paper, variability in the sample pellet and preparation method is investigated, as is variability in the fitting procedure for the derived optical constants. The n/k vectors are derived from the measured ellipsometric parameters, tan ? and ?, as they are fit by an oscillator model which yield n(?) and k(?) vectors as a function of wavenumber, ?. Construction of the oscillator model is not automatic and depends on significant input from the analyst as well as the sample’s physical characteristics. For the pellet pressing, the experimental variability was found to be minimized for size-selected powdered samples as gauged by the minimal variance in ? and ? for three different pellets; similarly, the analytical precision for multiple measurements of the same pellet was also quite good, suggesting that a pressed pellet is a viable sample preparation method. The greatest variability came in the analytic fitting procedure with differences up to 20% arising from four different fits to the same data set. The final ellipsometric n/k data are compared to literature values obtained from crystalline (NH4)2SO4 samples as well as single-angle reflectance measurements that also used pressed pellets. Comparison with the previous literature values shows generally good agreement although higher k-values are observed for the independent sets of data derived from pressed pellets. These data are suggested as an improved set of optical constants for (NH4)2SO4.

optical constants, ellipsometry, ammonium sulfate,↗
DOE OSTI2021

Impact of Humidity and Temperature on the Stability of the Optical Properties and Structure of MAPbI3, MA0.7FA0.3PbI3 and (FAPbI3)0.95(MAPbBr3)0.05 Perovskite Thin Films

In situ real-time spectroscopic ellipsometry (RTSE) measurements have been conducted on MAPbI3, MA0.7FA0.3PbI3, and (FAPbI3)0.95(MAPbBr3)0.05 perovskite thin films when exposed to different levels of relative humidity at given temperatures over time. Analysis of RTSE measurements track changes in the complex dielectric function spectra and structure, which indicate variations in stability influenced by the underlying material, preparation method, and perovskite composition. MAPbI3 and MA0.7FA0.3PbI3 films deposited on commercial fluorine-doped tin oxide coated glass are more stable than corresponding films deposited on soda lime glass directly. (FAPbI3)0.95(MAPbBr3)0.05 films on soda lime glass showed improved stability over the other compositions regardless of the substrate, and this is attributed to the preparation method as well as the final composition.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Substrate‐Dependent Molecular and Nanostructural Orientation of Nafion Thin Films

Abstract The effects of film thickness and substrate composition on the ionomer structure in porous electrodes are critical in understanding pathways toward developing higher performance electrochemical devices, including fuel cells and batteries. Insights are gained into the molecular and nanostructural orientation dependence for thin Nafion films (12–300 nm thick) on gold, platinum, and SiO 2 model substrates. Molecular orientation is determined from the birefringence measured using spectroscopic ellipsometry, while the nanostructural orientation of the ionic domains is measured using grazing‐incidence small‐angle X‐ray scattering. Density functional theory calculations for the molecular polarizability of the Nafion backbone and side chain show complimentary contributions to the measured birefringence values for the material. Nafion films prepared on SiO 2 substrates exhibit a nearly isotropic molecular and nanostructural orientation. Films on gold and platinum display parallel backbone orientations, relative to the substrate, with decreasing film thickness. However, a birefringence transition toward molecular isotropy is observed for 30 nm thick films on Au and Pt; while the ionic nanostructured domains continuously align parallel to the substrate. This apparent isotropic molecular orientation with increasing domain orientation highlights the difference between the backbone and side chain orientation, a key finding for elucidating transport in confined films at the interfaces.

Kushner, Douglas I.↗
DOE OSTI2020

Acceleration of Crystallization Kinetics in Ge‐Sb‐Te‐Based Phase‐Change Materials by Substitution of Ge by Sn

Abstract Thin films of (Ge 1– x Sn x ) 8 Sb 2 Te 11 are prepared to study the impact of Sn‐substitution on properties relevant for application in phase‐change memory, a next‐generation electronic data storage technology. It is expected that substitution decreases the crystallization temperature, but it is not known how the maximum crystallization rate is affected. Ge 8 Sb 2 Te 11 is chosen from the (GeTe) y (Sb 2 Te 3 ) 1– y system of phase‐change materials as a starting point due to its higher crystallization temperature as compared to the common material Ge 2 Sb 2 Te 5 . In situ X‐ray diffraction at 5 K min −1 heating rate is performed to determine the crystallization temperature and the resulting structure. To measure the maximum crystallization rate, femtosecond optical pulses that heat the material repetitively and monitor the resulting increase of optical reflectance are used. Glasses over the entire composition range are prepared using a melt‐quenching process. While at x = 0, 97, subsequent pulses are required for crystallization, one single pulse is enough to achieve the same effect at x = 0.5. The samples are further characterized by optical ellipsometry and calorimetry. The combined electrical and optical contrast and the ability to cycle between states with single femtosecond pulses renders Ge 4 Sn 4 Sb 2 Te 11 promising for photonics applications.

Zalden, Peter↗
DOE OSTI2021

Anion Exchange Ionomers: Impact of Chemistry on Thin-Film Properties

Ionomer thin-films (i.e., 20–100 nm) on supports serve as model systems to understand ionomer-catalyst interfacial behavior as well as the confinement-driven deviation in properties from bulk membranes. While ionomer thin-films have been examined for proton exchange ionomers, the thin-film properties of anion exchange ionomers (AEIs) remain largely unexplored. More importantly, delineating the convoluted impact of chemistry and confinement on thin-film morphology and hydration is of interest to advancing the field on functional ionic interfaces. In this work, these aspects are studied by using AEIs of different backbones (perfluorinated, aliphatic, and aromatic) and side chains (various lengths, and single versus dual functional groups). Quartz-crystal microbalance and spectroscopic ellipsometry are used to analyze density and coupled with calculated free volume fraction of thin-films to provide insights on their gas transport properties. AEI side-chain's chemical character plays a key role in how confinement modulates hydration (in thin-film versus bulk). Overall, the results elucidate the effects of backbone, side-chain chemistry versus anion/cation type in the confinement-driven changes in thin-film morphology and swelling. This study also provides new insights for tuning AEI transport functionalities at interfaces via chemistry, which can benefit the design and development of electrode-ionomers for alkaline membrane-based energy systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Role of Optical Phonon Confinement in the Infrared Dielectric Response of III–V Superlattices

Polar dielectrics are key materials of interest for infrared (IR) nanophotonic applications due to their ability to host phonon-polaritons that allow for low-loss, subdiffractional control of light. The properties of phonon-polaritons are limited by the characteristics of optical phonons, which are nominally fixed for most “bulk” materials. Superlattices composed of alternating atomically thin materials offer control over crystal anisotropy through changes in composition, optical phonon confinement, and the emergence of new modes. In particular, the modified optical phonons in superlattices offer the potential for so-called crystalline hybrids whose IR properties cannot be described as a simple mixture of the bulk constituents. To date, however, studies have primarily focused on identifying the presence of new or modified optical phonon modes rather than assessing their impact on the IR response. Here, this study focuses on assessing the impact of confined optical phonon modes on the hybrid IR dielectric function in superlattices of GaSb and AlSb. Using a combination of first principles theory, Raman, FTIR, and spectroscopic ellipsometry, the hybrid dielectric function is found to track the confinement of optical phonons, leading to optical phonon spectral shifts of up to 20 cm -1 . These results provide an alternative pathway toward designer IR optical materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Porogen‐Integrated Rapid Oxidation Enables Structured Mesoporous Metal Oxide Films

Structured metal oxide films have promise in optoelectronics, sensing, energy storage, and catalysis but their uptake is predominately limited due to their long and high‐temperature syntheses. Here, in this study, a self‐assembling polymer is used which can act as a chelating fuel source in a solution combustion reaction to generate highly structured mesoporous aluminum oxide films at <250 °C in a matter of minutes through a process termed porogen‐integrated rapid oxidation (PiRO). The resulting films with thicknesses up to 500 nm show an open‐cell, face‐centered cubic structure of spheroidal pores. Further, an additional ligand can be included to control the self‐assembly step to yield both through‐film ordering or tunable disordering for increased pore volume as confirmed by both grazing incidence small angle X‐ray scattering and ellipsometry. Finally, roll‐to‐roll manufacturing with PiRO is demonstrated on flexible polymeric substrates. The method offers a tunable, scalable, low‐temperature, and lower‐cost method to generate large‐area structured mesoporous metal oxide films.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Stoichiometric Control and Optical Properties of BaTiO 3 Thin Films Grown by Hybrid MBE

BaTiO 3 is a technologically relevant material in the perovskite oxide class with above-room-temperature ferroelectricity and a very large electro-optical coefficient, making it highly suitable for emerging electronic and photonic devices. An easy, robust, straightforward, and scalable growth method is required to synthesize epitaxial BaTiO 3 thin films with sufficient control over the film's stoichiometry to achieve reproducible thin film properties. Here the growth of BaTiO 3 thin films by hybrid molecular beam epitaxy is reported. A self-regulated growth window is identified using complementary information obtained from reflection high energy electron diffraction, the intrinsic film lattice parameter, film surface morphology, and scanning transmission electron microscopy. Subsequent optical characterization of the BaTiO 3 films by spectroscopic ellipsometry revealed refractive index and extinction coefficient values closely resembling those of stoichiometric bulk BaTiO 3 crystals for films grown inside the growth window. Even in the absence of a lattice parameter change of BaTiO 3 thin films, degradation of optical properties is observed, accompanied by the appearance of a wide optical absorption peak in the IR spectrum, attributed to optical transitions involving defect states present. Therefore, the optical properties of BaTiO 3 can be utilized as a much finer and more straightforward probe to determine the stoichiometry level present in BaTiO 3 films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Two–Photon Printing of Shape–Memory Microstructures and Metasurfaces via Radical–Mediated Thiol–Vinyl Hydrothiolation

Shape-memory resists capable of high-resolution curing into arbitrarily designed structures are increasingly demanded for soft robotics, optical sensors, microscale manufacturing, and biomedicine. Amorphous, shape-memory thiol-vinyl networks were printed using two-photon polymerization (2PP) curing of a simple resin formulated with commercially available reagents. The ability to print high-resolution feature sizes down to 200 nm is attributed to the use of radicalmediated, thiol-vinyl step-growth polymerization that quickly crosslinks the resin, limiting diffusive transport. The thermomechanical behavior of the 2PP-cured material analyzed in compression, tension and three-point bending is similar to the behavior of the UV-polymerized samples. To demonstrate the ability to design, field, and test 4D responsive microstructures, an array of nine springs with coil diameters of 330 μm was printed. Following compressive shapefixing, printed arrays can release 11 μJ of stored elastic strain energy when reheated. Further, a new concept of dichroic-memory of a metamaterial device is demonstrated by printing a twisted woodpile structure with circular dichroism as characterized by Mueller Matrix ellipsometry. Furthermore, our results demonstrate how combining high-resolution 2PP curing with stimuli-responsive molecular architectures can further the engineering of responsive microstructures and metamaterials.

36 MATERIALS SCIENCE↗