Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREQUENCY MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

DIII-D High Field Side Lower Hybrid Current Drive Experiment Overview

In preparation for high field side lower hybrid current drive (HFS LHCD) experiments in DIII-D, the HFS LHCD was to be commissioned and physics experiments commence once the system operated up to 300 kW for 0.5 s. The initial physics experiments sought to characterize coupling, wave propagation, and driven current measurements. In HFS LHCD first campaign, the maximum power was limited to <200 kW due to waveguide pressure leaks limiting the number of available modules and power per module. Here we summarize commissioning progress and initial physics observations. The HFS LHCD coupler was optimized for high qmin, DIII-D discharges where efficient off-axis current at r/a~0.6-0.8 is desired. The coupler n|| spectrum is peaked at 2.7 and is predicted to generate ~0.14 MA/MW coupled for 1.6 MW injected. In preparation, the HFS scrape-off layer density profile was characterized and found to have steeper profiles and lower fluctuation levels than the low field side. Furthermore, the HFS SOL density profile can be accurately predicted using global plasma quantities using machine learning. Thus far, one module has injected ~100 kW for 0.5 s with <5% reflected power. Nonthermal electrons have been observed on lower frequency channels of the electron cyclotron emission radiometer correlated with the LH power indicating core wave absorption. To avoid 30R neutral beam heat flux, a split launcher is proposed to avoid the high heat flux region while maintaining power spectrum and directivity.

Wukitch, Stephen J. [Massachusetts Inst. of Techno↗
DOE OSTI2025

Impacts of PV Module Connector Failures on Cost and Performance of Utility Scale Photovoltaic Systems

The reliability, cost and performance of electrical connectors are a concern in all types of electrical systems, and demands on connectors used on photovoltaic (PV) systems include that connectors maintain electrical conductivity and physical strength, endure ultraviolet sunlight and high ambient temperature, and resist moisture and chemical intrusion over a very long (>25 year) performance period. Connector failures increase operation and maintenance (O&M) costs and reduce plant production, but connector failure can also cause safety and liability problems, which are of greater concern. This work results from a three-year collaboration between Sandia National Laboratories (SNL), the Electric Power Research Institute (EPRI), and the National Renewable Energy Laboratory (NREL) and funded by the U.S. Department of Energy (DOE) Solar Energy Technology Office (SETO) under Agreements #39035 and #38531 "Connector Reliability Across the US Solar Sector." a multi-pronged investigation of PV connector health across the US (see https://energy.sandia.gov/pvconnectors/). This report presents derivation of a Techno-Economic Analysis (TEA) that models failure modes and frequencies (how often failure occurs), estimates O&M costs and lost production associated with connector failures, and then calculates the effect that PV module connectors can have on Levelized Cost of Energy (LCOE). The model is informed with initial data from quantitative assessment of failure rates, root causes and mechanisms, in-situ diagnostics and data collection, lab-based forensics, and interviews with PV connector manufacturers and plant operators. SNL conducted site inspections at multiple utility-scale sites in different climates and subjected field samples of new, used, and degraded connectors to visual and electrical characterization. EPRI conducted metallurgical analysis of the pin and sleeve conductors to study failure-induced morphological and compositional changes. There is in general a shortage of statistically valid data, but data from PVROM database maintained by SNL was sufficient to ascertain failure rates and lost production as well as provide qualitative insight in its curated maintenance records. This report details the structure of the mathematical model but the sources of data to inform the model will continue to evolve. Analysis of a 100 MW PV plant is provided as an example of the use of the model, with results indicating that connectors are responsible for Annualized O&M Costs of $\$$71,933/year; Annualized Unit O&M Costs of $\$$0.72/kW/year; that a Reserve Account of $\$$187,220 should be available to fund repairs related to connectors; that connectors add $\$$1,494,004 to the Net Present Value of the O&M Costs (project life); and that O&M related to connectors adds about $\$$0.00088/kWh to the Levelized Cost of Energy. The impact of this model is to provide a tool to make the US solar sector more robust by quantifying and monetizing the reliability risks to utility-scale PV systems posed by poorly installed, mismatched and/or poorly designed and manufactured connectors. The TEA provides a model incorporating failure statistics, O&M cost data, and lost production into a single figure of merit, informing decisions and enabling practitioners to optimize cost and performance trade-offs. Stakeholders include connector manufacturers, system designers and equipment specifiers, standards bodies, installers and O&M providers, investors and insurance underwriters. This report supports continued growth of PV predicated on assurances that properly installed and maintained PV system connectors are safe and reliable. The project team is proposing future work including accelerated testing of connectors and expanding the approach taken here to other PV system components, such as TEA for rapid shut-down devices.

14 SOLAR ENERGY↗
DOE OSTI2025

Fault Network Geometry Modulates Earthquake Source Spectra Across Scales

Earthquake source spectra provide unique insights into the earthquake rupture process. Motivated by previous research suggesting that complex fault geometries enhance high‐frequency seismic radiation, we study the influence of fault network geometry on earthquake source spectra using multiple independent observations. At regional scales, we examine correlations of stress drop measurements with surface fault trace misalignment in Southern California, Japan, and Central Italy. At a global scale, we examine correlations of moment‐rate function complexity of large earthquakes with focal mechanism variability, a proxy for local fault complexity. Despite significant scatter in the observations, we find overall consistent positive correlations. The concept that elastic interactions of discrete fault structures during the earthquake rupture process generates high‐frequency ground motions offers a coherent framework for interpreting our observations. These findings suggest that variations in fault complexity explain why some earthquakes produce stronger high‐frequency ground motions than others.

Lee, Jaeseok [Brown Univ., Providence, RI (United ↗
DOE OSTI2025

Accurate determination of uranium isotope abundances by wavelength modulation spectroscopy in atomic beams

The design and demonstration of an optical analysis system based on wavelength modulation spectroscopy in an atomic beam for uranium isotope abundance determinations is presented. This system probes the uranium 5f 3 6d7s 2 ( 5 L 6 ) → 5f 2 6d 2 7s 2 ( 5 K 5 ) transition at 861.031 nm, which is considered to be the most suitable transition for uranium isotopic analysis. A new laser characterization strategy was developed for the conditions where optimum laser wavelength modulation depth was small compared to the free spectral range (FSR) of etalons. Two capabilities enabled the higher-precision determination of isotope abundances of atomic beams: (1) reduction of low-frequency additive noise, especially the noise caused by black-body radiation and (2) suppression of non-absorption transmission losses. The performance of this system was validated with uranium samples of various isotopic compositions. Further, by comparing the measurements using natural uranium samples between the direct absorption and the wavelength modulation approaches, a 21-fold decrease in uncertainty of the integrated absorbance and a 6.8-fold improvement in the 1-σ precision of the number density were achieved. In addition, by comparing the results using uranium oxide samples, a 6.1-fold decrease in the uncertainty of inferred isotope abundance was obtained. These results demonstrate that the 1f-normalized 2f wavelength modulation spectroscopy (WMS-2f/1f) technique enables higher-precision analysis of atomic beams.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

GaN-based W-band receiver chip development for fusion plasma diagnostics

Millimeter-wave diagnostics have proven effective on various magnetic fusion devices worldwide, yet the formidable challenges posed by the harsh environments of future burning plasma devices, characterized by extreme temperatures, pressures, and radiation levels, remain a significant hurdle. To address these challenges, the utilization of wide bandgap Gallium Nitride (GaN)-based millimeter-wave diagnostics is a most promising solution for fusion reactor safety monitoring and control. A noteworthy W-band GaN-based system-on-chip receiver has been the demonstrated by employing HRL T3 40 nm GaN technology. This receiver chip, compactly designed with dimensions of 3 × 5 mm 2 , incorporates essential components such as the 75–110 GHz RF Low-Noise Amplifier (LNA), mixer, Intermediate Frequency (IF) amplifier, and Local Oscillator (LO) chain. This receiver chip will be packaged as a millimeter-wave receiver module and applied on the DIII-D National Fusion Facility, for fusion plasma edge shape monitoring for operational safety and dangerous disruption prediction. The laboratory measurement results have demonstrated suitable performance. Furthermore, this advancement is pivotal for accurate analysis of plasma behavior in the extreme conditions of burning plasma devices, driving progress in fusion research and technology.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Modulating surface acoustic wave generation through superconductivity

Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device miniaturization and on-chip integration. The generic design of these devices involves piezoelectric substrates with comb-like arrays of Al or Au electrodes known as interdigitated transducers (IDTs) deposited on the surface. However, Al and Au both have shortcomings at the cryogenic temperatures required for quantum applications, namely, the formation of two-level systems and the lack of superconductivity perpetuating Ohmic losses, respectively. In this work, SAWs are generated in the high-MHz to low-GHz range using niobium nitride (NbN) interdigitated transducers and Bragg reflectors. We demonstrate the fabrication of acoustic devices through photolithography and reactive ion etching. The sharp transition between superconducting and normal states and the corresponding change in SAW transmission allows for fine control of the “on” (superconducting) and “off” (normal) states of NbN, with a ΔT = 1 K separating the transmission minimum and maximum. We demonstrate a 16× difference in transmission between the “on” and “off” states of the device. The SAW transmission behavior mirrors the change in resistance of NbN at its T c . These findings open up new possibilities for the integration of NbN SAW resonators into existing quantum architectures based on NbN and a method for adjusting transmission properties independent of applied voltage.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Paradigm for universal quantum information processing with integrated acousto-optic frequency beamsplitters

Frequency-bin encoding offers tremendous potential in quantum photonic information processing, in which a single waveguide can support hundreds of lightpaths in a naturally phase-stable fashion. This stability, however, comes at a cost: arbitrary unitary operations can be realized by cascaded electro-optic phase modulators and pulse shapers, but require nontrivial numerical optimization for design and have thus far been limited to discrete tabletop components. In this article, we propose, formalize, and computationally evaluate a new paradigm for universal frequency-bin quantum information processing using acousto-optic scattering processes between distinct transverse modes. We show that controllable phase matching in intermodal processes enables 2 × 2 frequency beamsplitters and transverse-mode-dependent phase shifters, which together comprise cascadable FRequency-transverse-mODe Operations (FRODOs) that can synthesize any unitary via analytical decomposition procedures. Modeling the performance of both random gates and discrete Fourier transforms, we demonstrate the feasibility of high-fidelity quantum operations with existing integrated photonics technology, highlighting prospects of parallelizable operations achieving 100% bandwidth utilization. Our approach is realizable with CMOS technology, opening the door to scalable on-chip quantum information processing in the frequency domain.

Lukens, Joseph M. [Purdue Univ., West Lafayette, I↗
DOE OSTI2025

The impact of pulse width modulation on heat accumulation in AlGaN channel HEMTs

The poor thermal properties of Aluminum–Gallium Nitride (AlGaN) channel High Electron Mobility Transistors (HEMTs) on sapphire limit the device’s maximum switching frequency due to high channel temperatures. Extracting the correct thermal time constants can provide guidelines for the device’s safe frequency operation. This study experimentally quantifies the impact of pulse width and duty cycle on the transient thermal dynamics of multi-finger AlGaN channel HEMTs. In most transient thermal metrology, lock-in averaging approaches are leveraged to increase signal-to-noise ratio and measure the device’s relative temperature rise. Assuming no heat accumulation, the temperature rise is used to quantify the device’s thermal resistance under continued pulsed biasing. For devices grown on sapphire substrates, however, heat accumulation leads to elevated reference temperatures and causes the differential measurement to underestimate the peak temperature. This study demonstrates the capability of transient Gate Resistance Thermometry (tGRT) to measure the absolute temperature, which is required to precisely evaluate the device’s thermal resistance. When an absolute temperature measurement is not feasible (such as thermoreflectance imaging), a solution is proposed to derive the peak temperature under pulsed biasing based on the differential temperature under pulsing and the steady-state thermal resistance (which is typically easier to obtain). Finally, additional tGRT (without averaging) is performed to demonstrate the temperature-dependent thermal time constants required to minimize heat accumulation effects.

Field effect transistors↗
DOE OSTI2025

Hearing carrier-envelope offset frequency and phase in air with a microphone

Attosecond science and frequency metrology rely on the precise measurement and control of the laser pulse waveform, a feat traditionally achieved using optoelectronic techniques. In this study, we conducted a laser-induced acoustic experiment in air ionized by carrier-envelope phase (CEP)-stabilized sub-4 fs pulses. Our results reveal that the acoustic signal exhibits CEP dependence in few-cycle pulses, primarily through amplitude modulation from laser-driven ionization. This optoacoustic phenomenon is, to the best of our knowledge, a novel phenomenon that enables not only the measurement of the carrier-envelope offset frequency but also the direct characterization of the waveform of optical pulses through a microphone. Our study highlights the potential of laser-induced acoustic waves for advancing ultrafast science.

Han, Meng [Kansas State University, Manhattan, KS ↗
DOE OSTI2026

Flashlamp drive system for a high-energy 10–100 kHz pulse-burst Nd:YAG laser

We present the design of the flashlamp drive system for the NG100 laser, a 1 J/pulse, 10–100 kHz, pulse-burst Nd:YAG laser system being developed for application in a Thomson scattering plasma diagnostic. This flashlamp drive system is under active development, with a prototype now being constructed. The flashlamp drive system is modular, with each module capable of driving a series pair of linear flashlamps. Each drive module contains and is controlled by a dedicated Analog Regulator Controller. Thus each module is independently operable and controllable. This modular approach imposes no intrinsic limit to the number of modules that may be applied to drive the flashlamp pairs in a laser system. Each flashlamp drive module has a switch-regulated topology. An 1800 V main capacitor bank provides 25 kJ of energy storage, while a lower voltage output capacitor bank provides filtering and the initial energy delivered to the flashlamps at the start of the drive pulse. The main bank is recharged after each flashlamp drive pulse. As energy is drawn from the output bank by the flashlamps, an IGBT switching regulator feeds current from the main bank through an inductor to replenish the output capacitor bank. The rate of replenishment is feedback-controlled to maintain a regulated supply of power to the flashlamp load, with a setpoint range of 0.07 to 1.65 MW. An Analog Regulator Controller produces two-state variable pulse width feedback switching of the regulator IGBT. The switching frequency is ≤ 20 kHz, dynamically adjusted to limit ripple of the flashlamp power to ±3% statistical standard deviation of mean. For development or troubleshooting, each module is operable independent of the laser digital control system (microcontroller and FPGA).

Plasma diagnostics - interferometry↗
DOE OSTI2024

A weather pattern responsible for increasing wildfires in the western United States

Abstract The western United States (U.S.) has been experiencing more severe wildfires, in part due to climate change, but the underlying synoptic patterns and their modulation in driving fire weather is unclear. Here we investigated the relationship between weather regimes (WRs) and fire weather indices, specifically vapor pressure deficit (VPD) and the Canadian Forest Fire Weather Index. By identifying five singular WRs using k-means clustering, we found that a particular regime (WR-2), one characterized by a distinct tripolar wave train pattern over the continental U.S., has exhibited an increased frequency since 1980. The ascribed WR-2 regime was found to be mainly responsible for rising trends in the fire weather indices, especially VPD. Further, the average fire indices of the WR-2 regime played a more important role than the frequency in shaping the rising trends in the fire weather indices. The increased frequency of the WR-2 WR was mainly attributed to anthropogenic forcing and, the year-to-year variation of the frequency was associated with sea surface temperature anomalies over the subtropical eastern Pacific. Human-induced climate change might have furthered the exacerbation of wildfire danger in the western U.S. by modulating the behaviors of WRs and fire weather indices.

Zhang, Wei (ORCID:0000000221698749)↗
DOE OSTI2026

Integrated millimeter-wave cavity electro-optic transduction

Emerging communications and computing technologies will rely ever-more on expanding the useful radio frequency spectrum into the millimeter-wave and terahertz frequency range. Both classical and quantum applications would benefit from advancing integration and incorporation of millimeter-wave and electro-optic technologies into common devices, such as modulators. Here we demonstrate an integrated triply-resonant, superconducting electro-optic transducer. Our design incorporates an on-chip 107 GHz niobium titanium nitride superconducting resonator, modulating a thin-film lithium niobate optical racetrack resonator operating at telecom wavelengths. We observe a maximum photon transduction efficiency of η OE ≈ 0.82 × 10 −6 and an average single-photon electro-optic interaction rate of g 0 /2π ≈ 0.7 kHz. We also present a study and analysis of the challenges associated with the design of integrated millimeter-wave resonators and propose possible solutions to these challenges. Our work paves the way for further advancements in resonant electro-optic technologies operating at millimeter-wave frequencies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Synapse-specific catecholaminergic modulation of neuronal glutamate release

Norepinephrine in vertebrates and its invertebrate analog, octopamine, regulate the activity of neural circuits. We find that, when hungry,Drosophilalarvae switch activity in type II octopaminergic motor neurons (MNs) to high-frequency bursts, which coincide with locomotion-driving bursts in type I glutamatergic MNs that converge on the same muscles. Optical quantal analysis across hundreds of synapses simultaneously reveals that octopamine potentiates glutamate release by tonic type Ib MNs, but not phasic type Is MNs, and occurs via the G q -coupled octopamine receptor (OAMB). OAMB is more abundant in type Ib terminals and acts through diacylglycerol and its target Unc13A, a key component of the glutamate release machinery. Potentiation varies significantly—by up to 1,000%—across synapses of a single Ib axon, with synaptic Unc13A levels determining both release probability and potentiation. We propose that a dual molecular mechanism—an upstream neuromodulator receptor and a downstream transmitter release controller—fine-tunes catecholaminergic modulation so that strong tonic synapses exhibit large potentiation, while weaker tonic and all phasic synapses maintain consistency, yielding a sophisticated regulation of locomotor behavior.

Science & Technology - Other Topics↗
DOE OSTI2024

Efficient Optical Control of Magnon Dynamics in van der Waals Ferromagnets

Optical control of magnons in two-dimensional (2D) materials promises new functionalities for spintronics and magnonics in atomically thin devices. Here, we report control of magnon dynamics, using laser polarization, in a ferromagnetic van der Waals (vdW) material, Fe 3.6 Co 1.4 GeTe 2 . The magnon amplitude, frequency, and lifetime are controlled and monitored by time-resolved pump-probe spectroscopy. We show substantial (over 25%) and continuous modulation of magnon dynamics as a function of incident laser polarization. Our results suggest that the modification of the effective demagnetization field and magnetic anisotropy by the pump laser pulses with different polarizations is due to anisotropic optical absorption. This implies that pump laser pulses modify the local spin environment, which enables the launch of magnons with tunable dynamics. Our first-principles calculations confirm the anisotropic optical absorption of different crystal orientations. Our findings suggest a new route for the development of opto-spintronic or opto-magnonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

LDRD conclusion poster - Synthesizing Heterometallic Uranium Single Crystals to Understand the Influence of the Secondary Metals on Uranyl Axial Bond Strength

Understanding how transition metals influenced the chemistry of lanthanide and actinide (f-element) materials is critical for advancing separation technologies, materials design, and coordination chemistry. This project examined how incorporating first-row transition metals affected the structural and spectroscopic properties of f-element coordination polymers. In uranium(VI)-based systems synthesized with 2,6-pyridinedicarboxylic acid (PDC) ligands, single-crystal X-ray diffraction and Raman spectroscopy revealed that the presence of transition metals shortened the uranyl axial bond and induced a blue shift in its symmetric stretching vibration—evidence of increased bond strength. Electronic structure analysis, including Density of States (DOS) calculations using density functional theory (DFT), revealed altered orbital overlaps and highlighted the role of transition metal d-orbitals in modulating bonding. Raman modes were modeled using truncated structural fragments in collaboration with the University of Notre Dame, and although the predicted frequencies were lower than experimental values, they remained within expected ranges. In parallel, similar experiments with cerium (Ce) in the presence of cobalt (Co) and PDC demonstrated multi-step single-crystal-to-single-crystal transformations—behavior not observed in the uranium systems. Initial products included light yellow, orange, and polycrystalline materials. Single-crystal X-ray diffraction studies, conducted in collaboration with the Colorado School of Mines, identified the yellow phase as monometallic Ce(PDC)2(H2O)2·4H2O and the orange phase as heterometallic Ce2Co(PDC)4(H2O)6. After standing in solution for one week, both phases fully transformed into a dark yellow crystalline phase, [Ce3(PDC)5(H2O)8].6(H2O). Remarkably, this transformation was reversible—disturbing the equilibrium by removing some crystals caused reversion to the initial Ce(PDC)2(H2O)2·4H2O phase, highlighting dynamic behavior. All three structures were previously unreported. Solid-state UV-visible and Raman spectroscopy further distinguished these phases, revealing ligand-to-metal charge transfer involving Ce and characteristic d–d transitions from Co(II). The precise mechanism driving these transformations remained unclear; however, pH-dependent experiments confirmed that the transformation did not occur when the pH decreased. Overall, the project demonstrated that transition metals could be employed to tune bonding interactions, structural dimensionality, and optical properties in f-element materials, establishing new pathways for designing functional heterometallic systems. The work resulted in several novel structural discoveries and fostered productive collaborations with the University of Notre Dame and the Colorado School of Mines.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2024

Analysis and Control of a Three-Port Converter with High-Frequency AC Link for Hybrid Unmanned/Autonomous Aerial Vehicles

In this study, a three-port resonant converter with a high-frequency isolation link for hybrid unmanned/autonomous aerial vehicle (UAV/AAV) applications is analyzed. The rectified engine-generator set output supplies the first input ports while the other is connected to a battery energy storage system. Input ports consist of half-bridge high-frequency inverters, whereas output port utilizes a semi-bridgeless active rectifier. This rectifier is formed by replacing rectifier low-side diodes with active switching devices. A phase-shift duty-cycle control is implemented for switching signals to regulate the power share and flow between ports. The proposed control system implemented achieves zero voltage switching (ZVS), reduces switching losses, and minimum current flow optimization ensures regulation in a wide range of output power. Compared to the existing bidirectional pulse width modulation (PWM) converters, the proposed system decreases the number of power conversion stages and provides centralized control without needing communications between the ports. The proposed control technique operating in closed-loop control achieves the power flow between ports under various load conditions. Finally, theoretical analysis demonstrates the proposed converter’s viability and laboratory experimental validations at 500 W full power.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Delineating the Effects of Counterions on the Structural and Vibrational Properties of U(IV) Lindqvist Polyoxometalate Complexes

Herein we conducted a full investigation into the fundamental structural and vibrational properties of uranium(IV) Peacock−Weakley-type lacunary Lindqvist (W 10 ) polyoxometalate (POM) complexes. We recently demonstrated the importance of the secondary lattice elements in tuning the distortion of the D 4d symmetry in W 10 POM complexes, and here, we synthesized eight UW 10 complexes with different alkali metal counterions and evaluated how the composition and packing of counterion species affected complex structural and vibrational properties. Single-crystal X-ray diffraction analysis on complexes 1−8 revealed changes in structural distortion parameters as a function of differences in counterion configurations, while far-infrared and Raman spectra for 1−8 also demonstrated that vibrational mode frequencies were sensitive to changes in counterion composition and packing. To more effectively compare different counterion configurations, we developed counterion effective ionic radius (eIR) as a new structural parameter, and comparisons between structural distortion parameters and eIR values strongly suggested that modulation by the secondary lattice elements can affect structural and vibrational manifolds within POM complexes. Partial least squares (PLS) analysis was used to quantitatively evaluate correlations observed within this investigation, and PLS statistical models showed a strong correlation between counterion eIR and both structural distortion parameters and vibrational mode frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ion dynamics in hexagonal boron nitride ionogel electrolytes

Ionogel electrolytes incorporating exfoliated hexagonal boron nitride (hBN) nanoplatelets are promising materials for next-generation energy storage systems. However, detailed understanding of their ion transport properties at the molecular level remains limited. This study employs diffusion and relaxation nuclear magnetic resonance (NMR) techniques, including fast-field cycling (FFC) NMR, to investigate the dynamics of ionic species in hBN-ionogels. By spanning a broad frequency range from 30 kHz using FFC NMR to high-field NMR (500–800 MHz), we reveal distinct relaxation mechanisms governing ion dynamics in ionogels with and without lithium salts. Our results highlight the role of hBN in modulating molecular rotation and translational motion, significantly affecting 1 H and 19 F relaxation profiles. The presence of Li + alters the dynamic behavior in ionogels, enhancing anion mobility at the interface. Notably, 7 Li relaxation reveals strong interactions with the hBN surface that cannot be detected by diffusion NMR. Furthermore, these findings underscore the importance of spanning a broad frequency range in NMR studies of ionogels and provide critical insights into optimizing their design as novel electrolytes.

Electrolytes↗