Search NASA⌕ Search

SEARCH · Search NASA

Results for “Feature similarity measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

NISAR L-Band and S-Band Instrument Antennas: Compatibility Test and Results

Abstract—NASA ISRO SAR (NISAR) is one of the next major Earth science flight projects that NASA is currently developing in collaboration with ISRO, the Indian Space Research Organization. Featuring a 12m deployable off-set reflector, similar to SMAP but twice as large, and a dual band, dual polarization feed array, NISAR will measure with great accuracy even the smallest changes on our planet’s landmass, ice-sheet and forests over a 3 year period with a 12-day repeat cycle everywhere on the globe. Two radar systems will be sharing the same reflector, one operating in L-Band and one in S-Band. While the L-Band radar and feed antenna are being developed at Jet Propulsion Laboratory (JPL) for NASA, the S-Band feed antenna is under development at the Space Application Centre (SAC) in Ahmedabad, India, for ISRO. This paper describes the tests that were carried out both at JPL and SAC in order to verify that the level of compatibility between the two feed antennas were within the allocated requirements. Both S-parameters and radiation patterns were measured and compared with calculated predictions.

Harrell, Jefferson A.↗

Remote Thermal IR Spectroscopy of our Solar System

Indirect methods to detect extrasolar planets have been successful in identifying a number of stars with companion planets. No direct detection of an extrasolar planet has yet been reported. Spectroscopy in the thermal infrared region provides a potentially powerful approach to detection and characterization of planets and planetary systems. We can use knowledge of our own solar system, its planets and their atmospheres to model spectral characteristics of planets around other stars. Spectra derived from modeling our own solar system seen from an extrasolar perspective can be used to constrain detection strategies, identification of planetary class (terrestrial vs. gaseous) and retrieval of chemical, thermal and dynamical information. Emission from planets in our solar system peaks in the thermal infrared region, approximately 10 - 30 microns, substantially displaced from the maximum of the much brighter solar emission in the visible near 0.5 microns. This fact provides a relatively good contrast ratio to discriminate between stellar (solar) and planetary emission and optimize the delectability of planetary spectra. Important molecular constituents in planetary atmospheres have rotational-vibrational spectra in the thermal infrared region. Spectra from these molecules have been well characterized in the laboratory and studied in the atmospheres of solar system planets from ground-based and space platforms. The best example of such measurements are the studies with Fourier transform spectrometers, the Infrared Interferometer Spectrometers (IRIS), from spacecraft: Earth observed from NIMBUS 8, Mars observed from Mariner 9, and the outer planets observed from Voyager spacecraft. An Earth-like planet is characterized by atmospheric spectra of ozone, carbon dioxide, and water. Terrestrial planets have oxidizing atmospheres which are easily distinguished from reducing atmospheres of gaseous giant planets which lack oxygen-bearing species and are characterized by spectra containing hydrocarbons such as methane and ethane. Spectroscopic information on extrasolar planets thus can permit their classification. Spectra and spectral lines contain information on the temperature structure of the atmosphere. Line and band spectra can be used to identify the molecular constituents and retrieve species abundances, thereby classifying and characterizing the planet. At high enough spectral resolution characteristic planetary atmospheric dynamics and unique phenomena such as failure of local thermodynamic equilibrium can be identified. Dynamically induced effects such as planetary rotation and orbital velocity shift and change the shape of spectral features and must be modeled in detailed spectral studies. We will use our knowledge of the compositional, thermal and dynamical characteristics of planetary atmospheres in our own solar system to model spectra observed remotely on similar planets in extrasolar planetary systems. We will use a detailed radiative transfer and beam integration program developed for the modeling and interpretation of thermal infrared spectra measured from nearby planet planets to generate models of an extra-solar "Earth" and "Jupiter". From these models we will show how key spectral features distinguish between terrestrial and gaseous planets, what information can be obtained with different spectral resolution, what spectral features can be used to search for conditions for biogenic activity, and how dynamics and distance modify the observed spectra. We also will look at unique planetary phenomena such as atmospheric lasing and discuss their utility as probes for detection and identification of planets. Results of such studies will provide information to constrain design for instrumentation needed to directly detect extrasolar planets.

Kostiuk, Theodor↗

Influence of Heat Flow from the Planetary Interior on Surface Habitability

an primordial and/or radiogenic heat flow from a rocky planet’s interior help maintain a surface environment amenable to life?On rocky Earth-like planets with shallow oceans (≤5 km depth) that are on the outer edge of the habitable zone, the additional energy provided might make the difference between a world supporting regional habitat space and a world uninhabitable by any known life-form. To test this hypothesis, we introduce heat flux from the planetary interior as a forcing to the NASA/GISSROCKE-3D exoplanet GCM, and explore whether it can enhance the habitability of marginal terrestrial rocky planets (e.g.,paleo Earth in a “snowball” climate state).GCM simulations of modern Earth have not included geothermal heat flux as a climate forcing, as it is more than an order of magnitude less than the 2.9 W/m heating caused by anthropogenic greenhouse gases [Flanner, GRL 2009]. Modern Earth measurements in the oceans [Downes et al., GRL 2019] and results from ocean GCMs [Barnes et al., Ocean Model. 2017]suggest that localized higher heat flux can have measurable thermodynamic and dynamic impacts, such as weakening deep ocean stratification and increased poleward ocean heat transports. A similar result with ROCKE-3D would be important, since our snowball Earth simulations without heat flux produce features like ocean stratification that should have hampered the survival of life. We have created a set of spatially variable geothermal heat fluxes at varying horizontal resolutions based on modern Earth heat flow patterns [Davies, Geochem. Geophys. Geosys. 2013] to test the sensitivity of the ROCKE-3D GCM initially in a modern Earth context. Preliminary results show that even modest heat fluxes have a measurable impact on deep ocean temperatures (upto +0.9°C locally) and that this heat can be transported at depth along ocean circulation paths. Estimates of heat flux impacts on vertical ocean mixing and surface ocean conditions require long simulations at the higher spatial resolutions needed to express heat flow at the scale of most ocean ridges. Ongoing simulations are focused on testing the impacts of horizontal resolution and flux scaling on surface environments, especially for “snowball” climate scenarios.

Heat flow↗

Geology of Southern Guinevere Planitia, Venus, based on analyses of Goldstone radar data

The ensemble of 41 backscatter images of Venus acquired by the S Band (12.6 cm) Goldstone radar system covers approx. 35 million km and includes the equatorial portion of Guinevere Planitia, Navka Planitia, Heng-O Chasma, and Tinatin Planitia, and parts of Devana Chasma and Phoebe Regio. The images and associated altimetry data combine relatively high spatial resolution (1 to 10 km) with small incidence angles (less than 10 deg) for regions not covered by either Venera Orbiter or Arecibo radar data. Systematic analyses of the Goldstone data show that: (1) Volcanic plains dominate, including groups of small volcanic constructs, radar bright flows on a NW-SE arm of Phoebe Regio and on Ushas Mons and circular volcano-tectonic depressions; (2) Some of the regions imaged by Goldstone have high radar cross sections, including the flows on Ushas Mons and the NW-SE arm of Phoebe Regio, and several other unnamed hills, ridged terrains, and plains areas; (3) A 1000 km diameter multiringed structure is observed and appears to have a morphology not observed in Venera data (The northern section corresponds to Heng-O Chasma); (4) A 150 km wide, 2 km deep, 1400 km long rift valley with upturned flanks is located on the western flank of Phoebe Regio and extends into Devana Chasma; (5) A number of structures can be discerned in the Goldstone data, mainly trending NW-SE and NE-SW, directions similar to those discerned in Pioneer-Venus topography throughout the equatorial region; and (6) The abundance of circular and impact features is similar to the plains global average defined from Venera and Arecibo data, implying that the terrain imaged by Goldstone has typical crater retention ages, measured in hundreds of millions of years. The rate of resurfacing is less than or equal to 4 km/Ga.

Arvidson, R. E.↗

Hawkeye Ocean Color Instrument – Performance Summary

Hawkeye is an ocean color instrument that is part of the SeaHawk satellite developed for SOCON, the Sustained Ocean Color Observations using Nanosatellites program funded by the Gordon and Betty Moore Foundation and managed by the University of North Carolina – Wilmington (UNC-W). HawkEye has spectral characteristics similar to SeaWiFS, but with 8 times finer resolution and a smaller field of view more appropriate for lakes, rivers, and near-shore terrestrial environments. With a volume of only 10 X 10 X 10 cm (a CubeSat 1U), it can produce 8 bands of image data in a single pass, each with 1800 x 6000 pixels, with a resolution of 120 meters per pixel. This paper will present a short summary of instrument design, the spacecraft interface, and “lessons learned” during this effort. Scientists considering using linear arrays in a pushbroom mode for remote sensing will find this useful. Much of the discussion will center on optical performance, such as flat field calibration, polarization effects, stray light, out-of-band response, and exposure linearity. Images from field tests will be shown.The Hawkeye instrument is an ocean color measuring instrument designed to fly on the SeaHawk satellite developed for SOCON, the Sustained Ocean Color Observations using Nanosatellites program funded by the Gordon and Betty Moore Foundation and managed by the University of North Carolina – Wilmington (UNC-W). The Hawkeye instrument measures ocean color in 8 spectral bands, similar to SeaWiFS, except Band 7, which is shifted to a slightly lower wavelength to avoid the oxygen absorption feature that a wider band overlapped on SeaWiFS. The instrument is approximately 1/3rd the volume of the entire satellite, which is a 3U Cubesat manufactured by Clydespace in Glasgow, Scotland. The purpose of this instrument is to ascertain the quality of ocean color data possible with such a small, inexpensive instrument and bus. The nominal orbit is 540 km, and the nominal pixel geometric instantaneous field of view (GIFOV) 120 meters on a side. Each band will produce an image 1800 x 6000 pixels in size, for a total field of view of 216 X 720 km.2) DESIGN CONCEPTThe Hawkeye instrument uses linear arrays in pushbroom mode to collect data over a two dimensional area. The instrument has 4 linear CCD arrays, the Onsemi KLI-4104, to collect the 8 bands of data. Figure 1 illustrates the optical design for two bands, sharing a single array.

Hawkeye↗

Core-Level Spectroscopy with Hard and Soft X-rays on Phosphorus-Containing Compounds for Energy Conversion and Storage

The electronic properties of nine solid phosphorus (P)-containing compounds with varying oxidation states and chemical environments, including GaP (–III) , InP (–III) , red-P (0) , H 3 P (III) O 3 , Na 2 H 2 P 2 (IV) O 6 , H 3 P (V) O 4 , KH 2 P (V) O 4 , Na 2 HP (V) O 4 , and InP (V) O 4 , are investigated using X-ray absorption near-edge structure (XANES) spectroscopy in the hard (P K-edge) and soft X-ray regime (P L 2,3 - edge). We find shifts in the absorption-edge positions and correlate them with the ligands surrounding the P atom, likely causing a different core–hole interaction screening for different compounds. Complementing the experimental analysis, ab initio many-body calculations of XANES spectra provide insights into the excitonic nature of the observed spectral features and their impact on the electronic structure of the materials. Furthermore, we report on P K-edge XANES measurements on aqueous phosphorus-containing acids, including H 3 PO 3 , H 3 PO 4 , and their mixtures. At first sight, the spectra of the aqueous acids are similar to those of their solid counterparts. However, close inspection reveals a slight red shift of the absorption edge and the presence of fewer spectral features compared with spectra of the respective solids. Mixtures of aqueous acids display spectral features corresponding to the individual components, indicating the potential for speciation and quantification through fingerprinting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Field One-Dimensional and Two-Dimensional 27Al Magic-Angle Spinning Nuclear Magnetic Resonance Study of ?-, d-, and ?-Al2O3 Dominated Aluminum Oxides: Toward Understanding the Al Sites in ?-Al2O3

Herein, a detailed analysis was carried out using high-field (19.9 T) 27Al magic-angle spinning (MAS) nuclear magnetic resonance (NMR) on three specially prepared aluminum oxide samples where the ?-, d-, and ?-Al2O3 phases are dominantly expressed through careful control of the synthesis conditions. Specifically, two-dimensional (2D) multiquantum (MQ) MAS 27Al was used to obtain high spectral resolution, which provided a guide for analyzing quantitative 1D 27Al NMR spectra. Six aluminum sites were resolved in the 2D MQ MAS NMR spectra, and seven aluminum sites were required to fit the 1D spectra. A set of octahedral and tetrahedral peaks with well-defined quadrupolar line shapes was observed in the ?-phase dominant sample and was unambiguously assigned to the ?-Al2O3 phase. The distinct line shapes related to the ?-Al2O3 phase provided an opportunity for effectively deconvoluting the more complex spectrum obtained from the d-Al2O3 dominant sample, allowing the peaks/quadrupolar parameters related to the d-Al2O3 phase to be extracted. The results show that the d-Al2O3 phase contains three distinct AlO sites and three distinct AlT sites. This detailed Al site structural information offers a powerful way of analyzing the most complex ?-Al2O3 spectrum. It is found that the ?-Al2O3 phase consists of Al sites with local structures similar to those found in the d-Al2O3 and ?-Al2O3 phases albeit with less ordering. Spin–lattice relaxation time measurement further confirms the disordering of the lattice. Collectively, this study uniquely assigns 27Al features in transition aluminas, offering a simplified method to quantify complex mixtures of aluminum sites in transition alumina samples.

Xu, Suochang↗

Remote and Ground Truth Spectral Measurement Comparisons

FORMOSAT III are a set of six research satellites from Taiwan that were launched in April 2006. The satellites are in 800 km, 71 degree inclination orbits and separated by 24 degrees in ascending node. Ground truth spectral measurements were taken of outer surface materials on FORMOSAT III. From those measurements, a computer model was built to predict the spectral reflectance, which included phase angle and orientation of the spacecraft relative to the observer. However, materials exposed to the space environment have exhibited spectral changes including a darkening and a reddening of the spectra. This reddening was seen as an increase in slope of the reflectance as the wavelength increases. Therefore, the model of pristine materials was augmented to include the space weathering effects. Remote data were collected on two of the six FORMOSAT satellites using the 1.6 meter telescope at AMOS (Air Force Maui Optical and Supercomputing) site with the Spica spectrometer. Due to the separation in ascending node, observations were made on whichever one of the six satellites was visible on that specific night. Three nights of data were collected using the red (6000 9500 angstroms) filter and two nights of data were collected using the blue (3200 -6600 angstroms) filter. A comparison of the data showed a good match to the pristine model for the blue filter region. The absorption feature near 5500 angstroms due to the copper colored Kapton multi-layer insulation (MLI) was very apparent in the remote samples and a good fit to the data was seen in both satellites observed. The features in the red filter regime agreed with the pristine model up through 7000 angstroms where the reddening begins and the slope of the remote sample increases. A comparison of the two satellites showed similar features in the red and blue filter regions, i.e. the satellites were aging at the same rate. A comparison of the pristine model to the first month of remote measurements showed the amount by which the satellite had reddened. This information was used in the space weathered model to predict the second month s reflectance measurement. The results showed that the reddening did not increase from the first month of observations to the second. A third month of data will be necessary to determine if the reddening occurs instantly and then stabilizes with time or if the effect continues to increase with time.

Abercromby, Kira Jorgensen↗

Abundances, charge states, and energy spectra of helium and heavy ions during solar particle events

Carbon and oxygen energy spectra observed during several solar events indicate a systematic deviation of these spectra from a simple power law: the spectra bend down below about 100 keV/nuc and the amount of this bending is highly correlated with the size of the flare, as measured by the 'event averaged' flux of 130-220 keV protons. The energy spectra of helium computed for the same time periods do not show a similar feature. A large variability of the alpha/CNO ratio is found from event to event (from 2 to about 20 at 40 keV/nuc), and in all cases examined the carbon and oxygen nuclei are nearly fully stripped. These results are interpreted as evidence for storage of energetic ions in hot coronal regions, followed by strong adiabatic deceleration.

Gloeckler, G.↗

The magnetic field of Neptune

A model is given of the planetary magnetic field of Neptune based on a spherical harmonic analysis of the observations obtained by the Voyager 2. Generalized inverse techniques are used to partially solve a severely underdetermined inverse problem, and the resulting model is nonunique since the observations are limited in spatial distribution. Dipole, quadrupole, and octupole coefficients are estimated independently of other terms, and the parameters are shown to be well constrained by the measurement data. The large-scale features of the magnetic field including dipole tilt, offset, and harmonic content are found to characterize a magnetic field that is similar to that of Uranus. The traits of Neptune's magnetic field are theorized to relate to the 'ice' interior of the planet, and the dynamo-field generation reflects this poorly conducting planet.

Connerney, J. E. P.↗

Mid- and high-latitude total ozone observations from over three earth radii measured from Dynamics Explorer I

Column ozone measurements obtained from a Spin-scan Ozone Imager (SOI) aboard the Dynamics Explorer I (DE-I) satellite are discussed. The orbital geometry has many features similar to the Molniya satellite orbits. The ozone imagery obtained from DE-I are unique in being synoptic views of a region of continental scale for a period of a few hours. A brief description of the instrument, data, and orbit is followed by a discussion of some applications of DE-I data and the potential usefulness of an ozone imager aboard a satellite in a Molniya-type orbit.

Reynolds, Nathaniel D.↗

Developmental Flight Instrumentation: Review of Space Shuttle, Ares I-X, and Artemis I

Ascent vehicles in the developmental stages of the program are instrumented with Developmental Flight Instrumentation (DFI) sensors. These sensors establish a link between a vehicle and engineers on the ground to communicate conditions experienced during the ascent. These data are then compared to pre-flight predictions used in the design process. The aerodynamic, acoustic, thermal, and structural data are either telemetered to ground stations during the ascent or stored on the vehicle for post-flight recovery and archived at the Huntsville Operations Support Center (HOSC). Following NASA's Artemis I Space Launch System (SLS) launch on November 16, 2020, data from three separate programs are available at the HOSC: Space Shuttle Program (Space Transport System (STS)), Constellation Program (Ares I-X), and Artemis Program (SLS). Availability of these data presents a unique opportunity to examine DFI data from three distinct vehicles and analyze the broad impact of the DFI data on the understanding of transonic aerodynamics. Classical spectrogram and Empirical Mode Decomposition techniques were used to present data in aerodynamically analogous regions on each vehicle. On the SLS and Ares I-X, a region downstream of the Launch Abort System motors was chosen. Comparing SLS and the STS, a region downstream of booster Froward Attach Hardware was selected as analogous flow region. Some other regions of interest were also identified. Although similarities in flow features on three vehicles were identified, some challenges in the comparison were also encountered, especially due to poor temporal and spatial resolution of Shuttle measurements.

Space Shuttle↗

Developmental Flight Instrumentation: Review of Space Shuttle, Ares I-X, and Artemis I

Ascent vehicles in the developmental stages of the program are instrumented with Developmental Flight Instrumentation (DFI) sensors. These sensors establish a link between a vehicle and engineers on the ground to communicate conditions experienced during the ascent. These data are then compared to pre-flight predictions used in the design process. The aerodynamic, acoustic, thermal, and structural data are either telemetered to ground stations during the ascent or stored on the vehicle for post-flight recovery and archived at the Huntsville Operations Support Center (HOSC). Following NASA's Artemis I Space Launch System (SLS) launch on November 16, 2020, data from three separate programs are available at the HOSC: Space Shuttle Program (Space Transport System (STS)), Constellation Program (Ares I-X), and Artemis Program (SLS). Availability of these data presents a unique opportunity to examine DFI data from three distinct vehicles and analyze the broad impact of the DFI data on the understanding of transonic aerodynamics. Classical spectrogram and Empirical Mode Decomposition techniques were used to present data in aerodynamically analogous regions on each vehicle. On the SLS and Ares I-X, a region downstream of the Launch Abort System motors was chosen. Comparing SLS and the STS, a region downstream of booster Froward Attach Hardware was selected as analogous flow region. Some other regions of interest were also identified. Although similarities in flow features on three vehicles were identified, some challenges in the comparison were also encountered, especially due to poor temporal and spatial resolution of Shuttle measurements.

Space Shuttle↗

Is a pyrene-like molecular ion the cause of the 4,430-A diffuse interstellar absorption band?

The diffuse interstellar band (DIB) absorption features of astronomical spectra are suggested by recent results to be separable from the grains that cause visual extinction. Attention is presently given to laboratory measurements of the optical spectrum of the pyrene cation C16H10(+), which is one of the polycyclic aromatic hydrocarbon (PAH) molecular candidates proposed as carriers for DIBs. This ion exhibits an intense but strangely broad continuum similar to that of the naphthalene cation, so that this may be a common feature of all PAH cations and the basis of an explanation for PAHs' converting of an interstellar radiation fraction as large as that from the UV and visible range down to the IR.

Salama, F.↗

CANOZE measurements of the Arctic ozone hole

In CANOZE 1 (Canadian Ozone Experiment), a series of 20 ozone profile measurements were made in April, 1986 from Alert at 82.5 N. CANOZE is the Canadian program for study of the Arctic winter ozone layer. In CANOZE 2, ozone profile measurements were made at Saskatoon, Edmonton, Churchill and Resolute during February and March, 1987 with ECC ozonesondes. Ground based measurements of column ozone, nitrogen dioxide and hydrochloric acid were conducted at Saskatoon. Two STRATOPROBE balloon flights were conducted on February 26 and March 19, 1987. Two aerosol flights were conducted by the University of Wyoming. The overall results of this study will be reported and compared with the NOZE findings. The results from CANOZE 3 in 1988, are also discussed. In 1988, as part of CANOZE 3, STRATOPROBE balloon flights were conducted from Saskatchewan on January 27 and February 13. A new lightweight infrared instrument was developed and test flown. A science flight was successfully conducted from Alert (82.5 N) on March 9, 1988 when the vortex was close to Alert; a good measurement of the profile of nitric acid was obtained. Overall, the Arctic spring ozone layer exhibits many of the features of the Antarctic ozone phenomenon, although there is obviously not a hole present every year. The Arctic ozone field in March, 1986 demonstrated many similarities to the Antarctic ozone hole. The TOMS imagery showed a crater structure in the ozone field similar to the Antarctic crater in October. Depleted layers of ozone were found in the profiles around 15 km, very similar to those reported from McMurdo. Enhanced levels of nitric acid were measured in air which had earlier been in the vortex. The TOMS imagery for March 1987 did not show an ozone crater, but will be examined for an ozone crater in February and March, 1988, the target date for the CANOZE 3 project.

Evans, W. F. J.↗

Effect of particle size on thermodynamics and lithium ion transport in electrodes made of Ti 2 Nb 2 O 9 microparticles or nanoparticles

This study compares the charging mechanisms, thermodynamics, lithium ion transport, and operando isothermal calorimetry in lithium-ion battery electrodes made of Ti 2 Nb 2 O 9 microparticles or nanoparticles synthesized by solid-state or sol-gel methods, respectively. First, electrochemical testing showed that electrodes made of Ti 2 Nb 2 O 9 nanoparticles exhibited larger specific capacity, smaller polarization, and better capacity retention at large currents than those made of Ti 2 Nb 2 O 9 microparticles. Furthermore, potentiometric entropy measurements revealed that electrodes made of either Ti 2 Nb 2 O 9 microparticles or nanoparticles showed similar thermodynamics behavior governed by lithium intercalation in solid solution, as confirmed by in situ XRD measurements. However, electrodes made of Ti 2 Nb 2 O 9 nanoparticles featured smaller overpotential and faster lithium ion transport than those made of Ti 2 Nb 2 O 9 microparticles. In fact, operando isothermal calorimetry revealed smaller instantaneous and time-averaged irreversible heat generation rates at electrodes made of Ti 2 Nb 2 O 9 nanoparticles, highlighting their smaller resistive losses and larger electrical conductivity. Finally, the measured total heat generation over a charging/discharging cycle matched the measured net electrical energy loss. Overall, Ti 2 Nb 2 O 9 nanoparticles synthesized by the novel sol-gel method displayed excellent cycling performance and reduced heat generation as a fast-charging lithium-ion battery anode material. These features present major advantages for actual battery systems including larger energy and power densities, simpler thermal management, and enhanced safety.

25 ENERGY STORAGE↗

Physical properties investigation of tetragonal Ba T 2 P 2 (T = Ru, Pd)

The structural, thermal, electrical transport, and magnetic properties of ternary compounds BaT 2 P 2 (T = Ru, Pd) are reported together with electronic structure calculations. Our results show that BaRu 2 P 2 crystallises in the layered tetragonal ThCr 2 Si 2 -type structure (space group I4/mmm) whereas BaPd 2 P 2 adopts the primitive tetragonal CeMg 2 Si 2 -type structure (space group P4/mmm). The combined experimental results and electronic structure calculations suggest metallic and diamagnetic ground states for both materials. Electrical transport measurements further indicate non-Fermi liquid behaviour at low temperatures. Notably, BaRu 2 P 2 exhibits an anomalous feature in the magnetic susceptibility at T ~ 260 K, similar to that observed in BaRu 2 As 2 . A comparison between the bare density of states obtained from electronic structure calculations and the experimentally estimated values suggests the presence of strong correlation effects in the material. Furthermore, the heat capacity of BaPd 2 P 2 , calculated using the full phonon dispersion relation, is in good agreement with the experimental data, particularly at low temperatures, highlighting the significant contribution of optical phonon branches to C P in this temperature range.

flat bands↗

Remote sensing for detection of soil limitations in agricultural areas.

Research was initiated to establish remote sensing techniques for recognizing and mapping soil limitations to land use. Analysis of soils with limitations to land use because of dense subsoil (claypan) and unfavorable topography (convex sloping or depressional areas) was accomplished by experienced soil scientists utilizing a density slicing system. Maps of soil limitations were produced by photographing the color encoded density slicing analysis of an area. The percentage of each soil limitation was measured by the planimeter feature of the density slicing system. The initial results indicate that a density slicing system has great potential not only for delineating areas of similar soil limitations but also for indicating the percentage composition of an area.

Frazee, C. J.↗