SEARCH · Search NASA

Results for “Fuzzy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1997

Fuzzy Logic Decoupled Lateral Control for General Aviation Airplanes

It has been hypothesized that a human pilot uses the same set of generic skills to control a wide variety of aircraft. If this is true, then it should be possible to construct an electronic controller which embodies this generic skill set such that it can successfully control different airplanes without being matched to a specific airplane. In an attempt to create such a system, a fuzzy logic controller was devised to control aileron or roll spoiler position. This controller was used to control bank angle for both a piston powered single engine aileron equipped airplane simulation and a business jet simulation which used spoilers for primary roll control. Overspeed, stall and overbank protection were incorporated in the form of expert systems supervisors and weighted fuzzy rules. It was found that by using the artificial intelligence techniques of fuzzy logic and expert systems, a generic lateral controller could be successfully used on two general aviation aircraft types that have very different characteristics. These controllers worked for both airplanes over their entire flight envelopes. The controllers for both airplanes were identical except for airplane specific limits (maximum allowable airspeed, throttle ]ever travel, etc.). This research validated the fact that the same fuzzy logic based controller can control two very different general aviation airplanes. It also developed the basic controller architecture and specific control parameters required for such a general controller.

Duerksen, Noel↗

NASA NTRS2000

Fuzzy Current-Mode Control and Stability Analysis

In this paper a current-mode control (CMC) methodology is developed for a buck converter by using a fuzzy logic controller. Conventional CMC methodologies are based on lead-lag compensation with voltage and inductor current feedback. In this paper the converter lead-lag compensation will be substituted with a fuzzy controller. A small-signal model of the fuzzy controller will also be developed in order to examine the stability properties of this buck converter control system. The paper develops an analytical approach, introducing fuzzy control into the area of CMC.

Kopasakis, George↗

NASA NTRS1997

Fast Fuzzy Arithmetic Operations

In engineering applications of fuzzy logic, the main goal is not to simulate the way the experts really think, but to come up with a good engineering solution that would (ideally) be better than the expert's control, In such applications, it makes perfect sense to restrict ourselves to simplified approximate expressions for membership functions. If we need to perform arithmetic operations with the resulting fuzzy numbers, then we can use simple and fast algorithms that are known for operations with simple membership functions. In other applications, especially the ones that are related to humanities, simulating experts is one of the main goals. In such applications, we must use membership functions that capture every nuance of the expert's opinion; these functions are therefore complicated, and fuzzy arithmetic operations with the corresponding fuzzy numbers become a computational problem. In this paper, we design a new algorithm for performing such operations. This algorithm is applicable in the case when negative logarithms - log(u(x)) of membership functions u(x) are convex, and reduces computation time from O(n(exp 2))to O(n log(n)) (where n is the number of points x at which we know the membership functions u(x)).

Hampton, Michael↗

NASA NTRS1996

Refining Linear Fuzzy Rules by Reinforcement Learning

Linear fuzzy rules are increasingly being used in the development of fuzzy logic systems. Radial basis functions have also been used in the antecedents of the rules for clustering in product space which can automatically generate a set of linear fuzzy rules from an input/output data set. Manual methods are usually used in refining these rules. This paper presents a method for refining the parameters of these rules using reinforcement learning which can be applied in domains where supervised input-output data is not available and reinforcements are received only after a long sequence of actions. This is shown for a generalization of radial basis functions. The formation of fuzzy rules from data and their automatic refinement is an important step in closing the gap between the application of reinforcement learning methods in the domains where only some limited input-output data is available.

Berenji, Hamid R.↗

NASA NTRS2006

Analysis of Aircraft Control Performance using a Fuzzy Rule Base Representation of the Cooper-Harper Aircraft Handling Quality Rating

The Cooper-Harper rating of Aircraft Handling Qualities has been adopted as a standard for measuring the performance of aircraft since it was introduced in 1966. Aircraft performance, ability to control the aircraft, and the degree of pilot compensation needed are three major key factors used in deciding the aircraft handling qualities in the Cooper- Harper rating. We formulate the Cooper-Harper rating scheme as a fuzzy rule-based system and use it to analyze the effectiveness of the aircraft controller. The automatic estimate of the system-level handling quality provides valuable up-to-date information for diagnostics and vehicle health management. Analyzing the performance of a controller requires a set of concise design requirements and performance criteria. Ir, the case of control systems fm a piloted aircraft, generally applicable quantitative design criteria are difficult to obtain. The reason for this is that the ultimate evaluation of a human-operated control system is necessarily subjective and, with aircraft, the pilot evaluates the aircraft in different ways depending on the type of the aircraft and the phase of flight. In most aerospace applications (e.g., for flight control systems), performance assessment is carried out in terms of handling qualities. Handling qualities may be defined as those dynamic and static properties of a vehicle that permit the pilot to fully exploit its performance in a variety of missions and roles. Traditionally, handling quality is measured using the Cooper-Harper rating and done subjectively by the human pilot. In this work, we have formulated the rules of the Cooper-Harper rating scheme as fuzzy rules with performance, control, and compensation as the antecedents, and pilot rating as the consequent. Appropriate direct measurements on the controller are related to the fuzzy Cooper-Harper rating system: a stability measurement like the rate of change of the cost function can be used as an indicator if the aircraft is under control; the tracking error is a good measurement for performance needed in the rating scheme. Finally, the change of the control amount or the output of a confidence tool, which has been developed by the authors, can be used as an indication of pilot compensation. We use a number of known aircraft flight scenarios with known pilot ratings to calibrate our fuzzy membership functions. These include normal flight conditions and situations in which partial or complete failure of tail, aileron, engine, or throttle occurs.

Tseng, Chris↗

DOE OSTI2020

Fault diagnosis and fault tolerant control for T-S fuzzy stochastic distribution systems subject to sensor and actuator faults

The problem of fault diagnosis (FD) and fault tolerant control (FTC) for a class of Takagi-Sugeno (T-S) fuzzy stochastic distribution control (SDC) systems subject to sensor and actuator faults is discussed in this paper. First, fuzzy logic models are used to approximate the output probability density function (PDF). Next, an adaptive augmented state/fault diagnosis observer is proposed to estimate the system state, sensor and the actuator faults simultaneously. New expected weights based on the sensor fault estimation information and a PI-type fuzzy feedback fault tolerant (FT) controller are designed to compensate the effect of sensor fault and actuator fault simultaneously. When the sensor fault occurs, the expected objective is redesigned to compensate the sensor fault. Meanwhile, the PI controller can compensate the effect of actuator fault, and the output PDF of the system can still track the desired PDF after the fault occurs. Finally, an example of quality distribution control in chemical reaction process is given to confirm the effectiveness of the algorithm.

42 ENGINEERING↗

DOE OSTI2024

Applications of fuzzy logic and best-worst method for tritium sensor selection

Accurate assessment of tritium as a fuel source is critical in fusion reactions, necessitating effective sensor evaluation methods. This study investigates a multi-criteria decision-making framework for selecting tritium sensors, integrating fuzzy logic to enhance decision quality. Initial attempts at applying fuzzy logic were found to be too elementary and failed to capture the complexity of multi-criteria selection; this prompted a refined approach that incorporated expert insights and advanced ranking techniques for sensor evaluation. The research used a two-stage methodology. In the first stage, important criteria and sub-criteria for sensor performance were identified and defined. These criteria were then weighted and scored using a fuzzy best-worst method, drawing upon expert opinions to ensure relevance and validity. The second stage involved interpreting information about varying sensors to rank them based on their overall criteria scores, encouraging the selection of the most suitable options. The result of the study is a proposed method for effective sensor selection in fusion reactors, which in turn will significantly improve the reliability of tritium monitoring in fusion applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2003

Fuzzy image processing in sun sensor

This paper will describe how the fuzzy image processing is implemented in the instrument. Comparison of the Fuzzy image processing and a more conventional image processing algorithm is provided and shows that the Fuzzy image processing yields better accuracy then conventional image processing.

MEMS sun sensor APS attitude determination fuzzy i↗

NASA NTRS2017

LMI-Based Fuzzy Optimal Variance Control of Airfoil Model Subject to Input Constraints

This paper presents a study of fuzzy optimal variance control problem for dynamical systems subject to actuator amplitude and rate constraints. Using Takagi-Sugeno fuzzy modeling and dynamic Parallel Distributed Compensation technique, the stability and the constraints can be cast as a multi-objective optimization problem in the form of Linear Matrix Inequalities. By utilizing the formulations and solutions for the input and output variance constraint problems, we develop a fuzzy full-state feedback controller. The stability and performance of the proposed controller is demonstrated through its application to the airfoil flutter suppression.

optimal variance control↗

DOE OSTI2024

Fuzzy gauge theory for quantum computers

Continuous gauge theories, because of their bosonic degrees of freedom, have an infinite-dimensional local Hilbert space. Encoding these degrees of freedom on qubit-based hardware demands some sort of “qubitization” scheme, where one approximates the behavior of a theory while using only finitely many degrees of freedom. We propose a novel qubitization strategy for gauge theories, called “fuzzy gauge theory,” building on the success of the fuzzy σ -model in earlier work. We provide arguments that the fuzzy gauge theory lies in the same universality class as regular gauge theory, in which case its use would obviate the need of any further limit besides the usual spatial continuum limit. Furthermore, we demonstrate that these models are relatively resource-efficient for quantum simulations. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2025

Enhancing EV Motor Design Through Knowledge-Based AI and Hierarchical Fuzzy Logic Model

This work presents a novel approach to optimizing electric vehicle motor design through the integration of Knowledge-Based Artificial Intelligence (KB-AI) and Hierarchical Fuzzy Logic. Traditional motor design processes are time-intensive, relying heavily on iterative simulations and domain-specific expertise. These processes are further complicated by the nonlinear relationships between key design parameters. The proposed framework addresses these challenges by systematically encoding expert knowledge from scientific literature into a fuzzy logic system, allowing for the efficient handling of complex design variables. The hierarchical fuzzy logic model reduces computational complexity by decomposing the nonlinear relationships into manageable rule sets while maintaining design accuracy. The proposed methodology was applied to the design of a 100 kW motor, yielding optimal values for key parameters. This resulted in a compact motor design with a volume of 2.2 liters, showcasing the framework’s ability to deliver high-performance, application-specific motor configurations.

Kumar, Praveen [ORNL] (ORCID:0000000291877857)↗

DOE OSTI2024

Applications of Fuzzy Logic for Tritium Sensing Technology

Fuzzy Logic is a mathematical method that can represent human-like decisions by analyzing vagueness. The project is a practical approach for evaluating sensors using a fuzzy group best-worst method. Results What is the best sensor? The fuzzy logic methods give an answer to that through a selection system. The relationship between the inputs and the outputs gives consumers an understanding of how the best sensor was found through a scoring of each quality/criteria and their corresponding sub-criteria through expert opinion.

Holman, Allyson↗

DOE OSTI2025

Optimizing Solar PV Deployment in Manufacturing: A Morphological Matrix and Fuzzy TOPSIS Approach

The growing energy demand of the industrial sector and the need for sustainable solutions highlight the importance of efficient decision making in solar photovoltaic (PV) implementation. Selecting optimal PV configuration is complex due to the interdependent technical, economic, environmental, and social factors involved. This study introduces an integrated decision-making method combining a morphological matrix and fuzzy TOPSIS to systematically select and rank optimal PV system configurations for manufacturing firms. While the morphological matrix exhaustively examines possible design solutions based on sensing, smart, sustainable, and social (S4) attributes, the fuzzy TOPSIS method ranks the alternatives by handling uncertainty in decision making. A case study conducted in a Mexican manufacturing company validates the methodology’s effectiveness. The optimal PV configuration identified comprehensively addresses operational and sustainability criteria, covering all lifecycle stages. This approach demonstrates quantitative superiority and greater robustness compared to existing fuzzy TOPSIS-based methods for solar PV applications. The findings highlight the practical value of data-driven, multi-criteria decision making for industrial solar energy adoption, enhancing project feasibility, cost efficiency, and environmental compliance. Future research will incorporate discrete event simulation (DES) to further refine energy consumption strategies in manufacturing.

Briceño, Citlaly Pérez↗

NASA NTRS1976

DHARMA - Discriminant hyperplane abstracting residuals minimization algorithm for separating clusters with fuzzy boundaries

Learning of discriminant hyperplanes in imperfectly supervised or unsupervised training sample sets with unreliably labeled samples along the fuzzy joint boundaries between sample clusters is discussed, with the discriminant hyperplane designed to be a least-squares fit to the unreliably labeled data points. (Samples along the fuzzy boundary jump back and forth from one cluster to the other in recursive cluster stabilization and are considered unreliably labeled.) Minimization of the distances of these unreliably labeled samples from the hyperplanes does not sacrifice the ability to discriminate between classes represented by reliably labeled subsets of samples. An equivalent unconstrained linear inequality problem is formulated and algorithms for its solution are indicated. Landsat earth sensing data were used in confirming the validity and computational feasibility of the approach, which should be useful in deriving discriminant hyperplanes separating clusters with fuzzy boundaries, given supervised training sample sets with unreliably labeled boundary samples.

Dasarathy, B. V.↗

NASA NTRS1984

Evaluation of Fuzzy Rulemaking for Expert Systems for Failure Detection

Computer aids in expert systems were proposed to diagnose failures in complex systems. It is shown that the fuzzy set theory of Zadeh offers a new perspective for modeling for humans thinking and language use. It is assumed that real expert human operators of aircraft, power plants and other systems do not think of their control tasks or failure diagnosis tasks in terms of control laws in differential equation form, but rather keep in mind a set of rules of thumb in fuzzy form. Fuzzy set experiments are described.

Laritz, F.↗

NASA NTRS1985

Applications of Fuzzy Clustering Techniques to Stratified by Tropopause MSU Temperature Retrievals

The fuzzy partitioned clustering method was applied to predict tropopause height only using microwave information with an eye towards using it on real data under cloudy conditions. In the second stage stratified by tropopause regression temperature retrievals included using only the three or four microwave channels for each 40 mb range. The first step in the experiment is the fuzzy partitioned clustering of the microwave brightness temperatures. This method is a combination of standard hard clustering and discriminant analysis. The fuzzy partitioned clustering uses all the generated probabilities of membership of each pattern vector in any of the given clusters. These probabilities are generated by discriminant analysis to locate the correct cluster. The ultimate goal of standard discriminant analysis is to provide the unique (correct) cluster to which the pattern vector belongs. It was only the maximum of all the generated probabilities. The method uses all the probabilities and weight the regressions generated within each cluster. These regression formulas predict the tropopause height from the microwave brightness temperatures. In the second step the microwave regression temperature retrievals are stratified by tropopause height every 40 mb. The control experiment is defined, the data are stratified by land/ocean, summer/winter, and latitude bands.

Munteanu, M. J.↗

NASA NTRS1985

Fuzzy vision - Multiple inputs speed image understanding

The fuzzy vision system designed for the interpretation of multiple successive images is described. The system is noise insensitive and can be mapped directly onto parallel processing hardware. The system consists of a region generator and a viewer which access a common semantic net; the components and operation of these subsystems are examined. The advantages and disadvantages of the fuzzy vision system are discussed. Diagrams of the region generator, viewer, and a semantic net are provided. An example depicting the operation of the fuzzy vision system is presented.

Meier, R. J., Jr.↗

NASA NTRS1987

A closed-loop causal model of workload based on a comparison of fuzzy and crisp measurements techniques

Fuzzy and crisp measurements of workload are compared for a tracking task that varied in bandwidth and order of control. Fuzzy measures are as powerful as crisp measures, and can under certain conditions give extra insights into workload causality. Both methods suggest that workload arises in a system in which effort, performance, difficulty, and task variables are linked in a closed loop. Marked individual differences were found. Future work on the fuzzy measurement of workload is justified.

Moray, Neville↗