Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gap Formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development of Standardized Property Requirements, Measurement Methods, and Reporting Guidance for Coatings

The diverse research programs presently in progress around the world have advanced a large number of coated cladding concepts to various stages of maturity. Industry teams have developed leading coating compositions and geometries, but significant disparity exists in the importance placed on different coating properties, as well as the applicability and standardization of the various methods used to measure these properties. This milestone report provides an initial assessment of the most important coating properties and the experimental methods available for their determination to lay the foundation for standardized reporting and development of comprehensive datasets for modeling efforts. This report has determined that the residual stress of the coating is the most crucial property to investigate, yet it has received minimal attention to date due to a knowledge gap about the growth and formation of the brittle Laves phase under reactor conditions. The significance of residual stress of the coating is further enhanced by its connection and interdependence with other important properties like creep and coating failure mechanisms. This milestone proposes an importance rating for residual stress properties and their associated measurement techniques to fill in knowledge. Furthermore, techniques to investigate the outlined properties are discussed, and their capabilities and limitations are illustrated to provide guidance on their use.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1985

Directional Solidification of Monotectic and Hypermonotectic Aluminum-indium Alloys Under Micron-g

The objective of this program is to analyze the mechanisms involved in the composite solid structure formation obtained from a miscibility gap alloy under microgravity. The metallic system aluminum-indium was chosen for its low critical temperature, broad miscibility gap, and rather well-known thermodynamic properties. The experiment was performed aboard the Salyut-7 spacecraft. The theories of capture of particulates by an advancing front were not able to explain the observations made on SPAR and Salyut-7 experiments. A new model was developed based on the filtration theory considering the globules population: the solid/liquid interface is like a filter of negligible thickness for the globules and its efficiency is limited by a pressure barrier measured for Al-In alloys by ground based experiments. The Materials Experiment Assembly (MEA)-3 experiment was consequently adjusted to take into account the new model. The behavior of the globules in an interacting population on the solid front is, of course, an essential factor in the theory. The theory is at present being completed by results obtained by the Laboratoire d'Aerothermique of Meudon. The hydrodynamic and thermal interactions between pairs of globules placed in a temperature gradient have been calculated showing a large reduction of the Marangoni effect compared to the isolated globule. Physico-chemical properties of metallic liquid interface are currently being investigated.

Potard, C.↗
NASA NTRS1999

Cyclic Oxidation of FeCrAlY/Al2O3 Composites

Three-ply FeCrAlY/Al2O3 composites and FeCrAlY matrix-only samples were cyclically oxidized at 1000 C and 1100 C for up to 1000 1-hr cycles. Fiber ends were exposed at the ends of the composite samples. Following cyclic oxidation, cracks running parallel to and perpendicular to the fibers were observed on the large surface of the composite. In addition, there was evidence of increased scale damage and spallation around the exposed fiber ends, particularly around the middle ply fibers. This damage was more pronounced at the higher temperature. The exposed fiber ends showed cracking between fibers in the outer plies, occasionally with Fe and Cr-rich oxides growing out of the cracks. Large gaps developed at the fiber/matrix interface around many of the fibers, especially those in the outer plies. Oxygen penetrated many of these gaps resulting in significant oxide formation at the fiber/matrix interface far within the composite sample. Around several fibers, the matrix was also internally oxidized showing Al2O3 precipitates in a radial band around the fibers. The results show that these composites have poor cyclic oxidation resistance due to the CTE mismatch and inadequate fiber/matrix bond strength at temperatures of 1000 C and above.

Nesbitt, James A.↗
NASA NTRS2004

History of Thermally Processed Solids in the Protoplanetary Disk: Reconciling Theoretical Models and Meteoritical Evidence

In this talk we assess theoretical models of the radial, temporal, and thermal evolution of nebula solids, and their ultimate accretion into planetesimals such as we see today, using meteorite evidence as a guide. Each class of chondrites contains a characteristic suite of chondrules and CAIs that may have formed over a period of several Myr during which planetesimals were accreting in the disk. Details of the various models for transient melting of chondrules and igneous CAIs will be left to others. However, high-temperature processes of different kinds evaporation, alteration, etc did affect these constituents and their environment over this time span. Here we describe evolutionary scenarios consistent with a large time gap between CAI and chondrule formation and the presence of distinctive suites of chondrules and CAIs in each chondrite class. Particle-gas dynamical processes transport particles of all relevant sizes (microns to many meters) within the nebula and affect their evolution in a variety of important ways. Turbulent radial diffusion spreads particles radially down their concentration gradients - as one example, it can prevent CAIs from being lost into the sun on several Myr timescales [1]. Vertical diffusion spreads the dense midplane particle layer, determining its volume density, which in turn affects the particle growth rate and even the dominant growth process [2-4]. Turbulent concentration selects aerodynamically sorted particles for orders-of-magnitude density enhancement, and is applicable to porous, fluffy particles of appropriate size as well as to solid chondrules [5]. Inward radial drift under gas drag brings a surprisingly large amount of material to regions where it evaporates; these evaporation fronts cause significant chemical modification of the nebula gas over a wide range of radii [6]. Radial transport by stellar winds can be important for small particles [7].

Cuzzi, J. N.↗
NASA NTRS2000

New codes for the optical channel

We present new codes and modulation formats for the deep space optical channel. By taking maximum avdvantage of inherent physical constraints on the communications link, these codes and modulation formats substantially close the large gap between state of the art systems and the Shannon limit.

channel codes modulation optical channel turbo cod↗
DOE OSTI2024

Method for producing a crystalline film

A method is provided for coating a surface of a material with a film of porous coordination polymer. A first substrate having a first surface to be coated is positioned in a processing chamber such that the first surface is placed in an opposing relationship to a second surface. The second surface may be provided by a wall of the processing chamber, or in some cases the second surface may be provided by a second substrate to be coated. The first substrate is held such that a gap exists between the first and second surfaces, and the gap is filled with at least one reaction mixture comprising reagents sufficient to form the crystalline film on at least the first surface. A thin gap (e.g., less than 2 mm) between the first and second surfaces is effective for producing a high quality film having a thickness less than 100 μm. Confining the volume of the reaction mixture to a thin layer adjacent the substrate surface significantly reduces problems with sedimentation and concentration control. The size, shape, or average thickness of the gap may be adjusted during formation of the film in response to feedback from at least one film growth monitor.

Britt, David K.↗
DOE OSTI2025

Community Dynamics Drive Calcium Carbonate Production in an Enriched Consortium of Soil Microbes

Recently, there has been a focus on using soil microbes as a means to store carbon in the soil in the form of calcium carbonate, outcomes of which include soil stabilization and biocementation. The molecular processes involved in microbially induced calcium carbonate formation are known, but there is still a significant knowledge gap regarding how community interactions, emergent processes that are distinct from the roles of individual members, may drive the formation of carbonate. To answer these questions, we describe the development and application of a consortium of soil microbes consisting of one species each of the Rhodococcus , Microbacterium , and Curtobacterium genera and two species from the Bacillus genus. We term these five species cultivated together carbon storing consortium A (CSC-A). Growth assays show that only a subset of CSC-A members produces CaCO 3 with Rhodococcus producing the most CaCO 3 but the complete CSC-A produces significantly higher amounts of CaCO 3 compared to the sum total carbonate produced by all member species. The development of CSC-A shows that CaCO 3 production may be as much a community process as it is the contribution of individual species, requiring us to move beyond single species analysis to fully understand carbonate formation by microbial communities in nature. CSC-A will allow the scientific community to ask and answer key questions about the molecular interactions surrounding inorganic carbon formation in soil, an important knowledge gap that must be filled if we wish to stabilize soils and harness microbial processes for materials production.

calcium carbonate↗
DOE OSTI2021

Excited Rydberg states in MoSe 2 /WSe 2 heterostructures

The functional form of Coulomb interactions in the transition metal dichalcogenides (TDMs) and other van der Waals solids is critical to many of their unique properties, e.g. strongly-correlated electron states, superconductivity and emergent ferromagnetism. This paper presents measurements of key excitonic energy levels in MoSe 2 /WSe 2 heterostructures. These measurements are obtained from resonance Raman experiments on specific Raman peaks only observed at excited states of the excitons. This data is used to validate a model of the Coulomb potential in these structures which predicts the exciton energies to within ~5 meV. This model is used to determine the effect of heterostructure formation on the single-particle band gaps of the layers and will have a wide applicability in designing the next generation of more complex TDM structures.

Materials Science↗
DOE OSTI2026

How nitrogen and oxygen shape SRF cavity performance

Nitrogen and oxygen-based surface treatments have revolutionized the performance of superconducting radiofrequency (SRF) cavities, enabling them to reach higher gradients and lower losses. However, the exact mechanisms by which these treatments improve cavity performance remain largely unknown. This work provides new insights into the role of nitrogen and oxygen in SRF cavity performance by using time-of-flight secondary ion mass spectrometry (TOF-SIMS) to precisely quantify the concentrations and depth profiles of these impurities within niobium cutouts. We correlate these impurity profiles with detailed cavity performance measurements, including surface resistance and quality factor, and compare our findings with predictions from BCS theory. The results demonstrate that while both nitrogen and oxygen enhance performance, ten times more oxygen is required to achieve the same reduction in BCS resistance as interstitial nitrogen. We present a potential model in which the observed variation arises from nitrogen's greater effectiveness in trapping hydrogen, thus reducing the formation of niobium hydrides and enhancing superconducting gap.

Hu, Hannah [Chicago U.]↗
DOE OSTI2020

Onset of magma ocean solidification on Mars inferred from Mn-Cr chronometry

The mantle of Mars probably differentiated through the crystallization of a magma ocean during the first tens of million years (Ma) of Solar System evolution. However, the exact timescale of large-scale silicate differentiation of the martian mantle is debated, and in particular, it remains unclear when differentiation commenced. In this paper, we applied the short-lived 53 Mn- 53 Cr system to martian meteorites in order to date the onset of large-scale mantle differentiation on Mars. The new Cr isotope data demonstrate that martian meteorites exhibit no resolvable radiogenic 53 Cr variations, and instead have a uniform +20.2±1.2 (95% conf.) parts-per-million excess in 53 Cr/ 52 Cr relative to the terrestrial mantle. The investigated groups of martian meteorites are lithologically varied and derive from diverse mantle sources that probably had variable Mn/Cr. Hence, the lack of 53 Cr variability among martian meteorites demonstrates that silicate differentiation on Mars occurred after the extinction of 53 Mn. Provided that the sources of the martian meteorites have Mn/Cr variations that are typical of the terrestrial planets, this result implies that the onset of large-scale silicate differentiation must have occurred later than 20±5 Ma after Solar System formation. The onset of silicate differentiation on Mars inferred here is significantly later than time estimates for segregation of the martian core which conservatively occurred within <10 Ma after Solar System formation. Thus, the new Mn-Cr data imply that there was a small, but resolvable, time gap of at least 5 Ma between core formation and magma ocean solidification on Mars. If the age of core segregation is taken at face value, our results imply that the martian magma ocean remained mostly molten over several Ma. This inferred longevity of the magma ocean is inconsistent with thermal models predicting rapid (<1 Ma) solidification of the martian magma ocean. Although there is currently no unique solution to this conundrum, our results can potentially be explained by a protracted history of impact bombardment that delayed differentiation in a shallow magma ocean on Mars, or perhaps more readily, by the presence of an early and dense atmosphere that acted as an insulator and prevented the magma ocean from cooling quickly.

58 GEOSCIENCES↗
DOE OSTI2021

Cosmic antihelium-3 nuclei sensitivity of the GAPS experiment

The General Antiparticle Spectrometer (GAPS) is an Antarctic balloon experiment designed for low-energy (0.1-0.3 GeV/n) cosmic antinuclei as signatures of dark matter annihilation or decay. GAPS is optimized to detect low-energy antideuterons, as well as to provide unprecedented sensitivity to low-energy antiprotons and antihelium nuclei. The novel GAPS antiparticle detection technique, based on the formation, decay, and annihilation of exotic atoms, provides greater identification power for these low-energy antinuclei than previous magnetic spectrometer experiments. This work reports the sensitivity of GAPS to detect antihelium-3 nuclei, based on full instrument simulation, event reconstruction, and realistic atmospheric influence simulations. The report of antihelium nuclei candidate events by AMS-02 has generated considerable interest in antihelium nuclei as probes of dark matter and other beyond the Standard Model theories. GAPS is in a unique position to detect or set upper limits on the cosmic antihelium nuclei flux in an energy range that is essentially free of astrophysical background. In three 35-day long-duration balloon flights, GAPS will be sensitive to an antihelium flux on the level of $1.3^{+4.5}_{-1.2} $ ∙ 10 -6 m -2 sr -1 s -1 (GeV/n) -1 (95% confidence level) in the energy range of 0.11-0.3 GeV/n, opening a new window on rare cosmic physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Gap-filled methane and carbon dioxide fluxes across two ecosystem states at the US-OWC AmeriFlux site (2015−2016, 2020−2022)

This dataset contains gap-filled measurements of methane flux (FCH4), net ecosystem CO2 exchange (NEE) partitioned into gross primary productivity (GPP) and ecosystem respiration (RE), as well as latent heat flux (LE) from a Great Lakes coastal freshwater wetland at the US-OWC AmeriFlux site. The dataset covers the peak growing seasons (June−September) of 2015−2016, dominated by Typha spp., and 2020−2022, characterized by floating-leaved species (lotus and water lily). These data were generated to investigate how rising water levels and vegetation shifts influence CH4 and CO2 fluxes across two distinct ecosystem states in this wetland. The dataset, provided in CSV format, includes half-hourly gap-filled flux data from June to September for 2015, 2016, 2020, 2021, and 2022. The gap-filled data refers to measurements where missing values due to instrument issues or quality control were filled using artificial neural networks (ANNs).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Tunable band gaps and optical absorption properties of bent MoS2 nanoribbons

Abstract The large tunability of band gaps and optical absorptions of armchair MoS 2 nanoribbons of different widths under bending is studied using density functional theory and many-body perturbation GW and Bethe–Salpeter equation approaches. We find that there are three critical bending curvatures, and the non-edge and edge band gaps generally show a non-monotonic trend with bending. The non-degenerate edge gap splits show an oscillating feature with ribbon width n , with a period $$\Delta n=3$$ Δ n = 3 , due to quantum confinement effects. The complex strain patterns on the bent nanoribbons control the varying features of band structures and band gaps that result in varying exciton formations and optical properties. The binding energy and the spin singlet–triplet split of the exciton forming the lowest absorption peak generally decrease with bending curvatures. The large tunability of optical properties of bent MoS 2 nanoribbons is promising and will find applications in tunable optoelectronic nanodevices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bit-GraphBLAS: Bit-Level Optimizations of Matrix-Centric Graph Processing on GPU

In the graph data structure like adjacency matrix, the connectivity of two nodes can be sufficiently represented using only 1 bit, but they are generally treated as 32-bit full-precision in state-of-the-art graph frameworks to adopt common sparse format such as CSR. Meanwhile, bit-level parallelism has recently be explored to have high-performance potential and low storage requirement on GPUs with dense bit-tiles. To fill the gap, our solution is a hierarchical storage format that contains the bit-indexing base and dense bit-tile units. Inherently, the granularity of the bit-tile is an essential factor in achieving both storage compression and GPU parallelism. How to find a sweet spot that trades off between avoiding sparsity and exploiting is comprehensively researched in this work. In the experiment, we evaluate the proposed storage format and algorithms on modern generation GPUs, including Pascal and Volta, to figure out critical software co-designs in conjunction with existing hardware-specific optimization.

Chen, Jou-An↗
DOE OSTI2025

National Energy Water Treatment & Speciation (NEWTS): A Water & Critical Mineral Database and Dashboard

The scarcity of water resources, the need for beneficial water reuse, and the challenges of wastewater treatment are becoming increasingly pressing in economic, social, and environmental domains. Addressing these concerns requires effective treatment strategies to manage wastewater streams and tackle environmental and economic issues. Furthermore, the recovery of critical minerals from the waste streams associated with energy production holds the promise of offsetting treatment costs and securing local sources of valuable minerals. However, relevant data on these waste streams are dispersed and challenging to locate. The process of ingesting such data into modeling software often involves multiple steps, requiring data restructuring to meet software-input requirements. The non-standardized reporting of water data makes data aggregation and reformatting a time-consuming process. Additionally, essential attributes necessary for modeling water treatment and mineral scale formation are frequently missing. Moreover, data gaps vary depending on the region of interest. Consequently, there is a pressing need for high-quality energy-water composition data that can be easily imported into water chemistry modeling software. To address this need, the National Energy Technology Laboratory has created the National Energy Water Treatment and Speciation (NEWTS) Database and Dashboard—a free online tool catering to community leaders and water researchers. NEWTS facilitates a comprehensive understanding of the composition of energy-related wastewater streams in the United States. The datasets provide detailed concentrations and speciation of major and minor aqueous compounds in energy-related wastewater streams, including power plant leachate, acid mine drainage, brackish water, and oil and gas produced water across the United States. Many of the aqueous species are critical minerals (Li, REEs) in high demand to modernize the world’s energy infrastructure. Many of the datasets also contain volumetric flow-rates needed to model the treatment and reuse scenarios in advanced aqueous chemistry software programs. The NEWTS Database and Dashboard offer public access to hitherto challenging-to-access datasets, presented in a standardized format that is tailored for easy input into aqueous chemistry modeling software. By performing the work needed to transform dispersed, disparate data sources into unified, model-ready datasets, NEWTS serves as an essential resource in advancing water treatment research and sustainable water resource management.

produced water management↗
NASA NTRS1986

Breakdown characteristics of an isolated conducting object in a uniform electric field

A laboratory experiment was conducted to determine the physical processes involved in the electrical breakdown of a particular spark gap arrangement. The gap consists of an isolated conducting ellipsoid located midway between two large flat electrodes. Gradual increase of the applied electric field, E, in the gap produces corona on the ellipsoid tips followed by flashover in a leader-arc sequence. The leader phase consists of the abrupt formation of ionized channels which partially bridge the gap and then decay prior to the arc. Measurements of dE/dt and of current were made, and photographs were taken with an image converter. Experimental parameters are listed.

Grothaus, M. G.↗
DOE OSTI2025

Efficient Broadband Terahertz Generation by Above‐Band‐Gap Excitation of the Pyroelectric ZnSnN 2

Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN 2 , and find that its above-band-gap excitation results in the efficient formation of an ultrafast photocurrent generating THz radiation. The resulting THz electric field spans a frequency range from below 1 THz to above 30 THz. The results suggest that the photocurrent is primarily driven by an ultrafast pyroelectric effect where the photo-excited carriers screen the spontaneous electric polarization of ZnSnN 2 . Strong structural disorder reduces the photocarrier lifetime significantly and, thus, enables broadband operation. ZnSnN2 shows a similar THz-emitter performance as the best spintronic THz emitters regarding bandwidth and amplitude. The study unveils the large potential of pyroelectric materials as efficient and broadband THz emitters with built-in bias fields.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Healable and conductive sulfur iodide for solid-state Li–S batteries

Solid-state Li-S batteries (SSLSBs) are made of low-cost and abundant materials free of supply chain concerns. Owing to their high theoretical energy densities, they are highly desirable for electric vehicles. However, the development of SSLSBs has been historically plagued by the insulating nature of sulfur and the poor interfacial contacts induced by its large volume change during cycling, impeding charge transfer among different solid components. We report an S 9.3 I molecular crystal with I 2 inserted in the crystalline sulfur structure, which shows a semiconductor-level electrical conductivity (approximately 5.9 × 10 -7 S cm -1 ) at 25 °C; an 11-order-of-magnitude increase over sulfur itself. Iodine introduces new states into the band gap of sulfur and promotes the formation of reactive polysulfides during electrochemical cycling. Further, the material features a low melting point of around 65 °C, which enables repairing of damaged interfaces due to cycling by periodical remelting of the cathode material. As a result, an Li-S 9.3 I battery demonstrates 400 stable cycles with a specific capacity retention of 87%. The design of this conductive, low-melting-point sulfur iodide material represents a substantial advancement in the chemistry of sulfur materials, and opens the door to the practical realization of SSLSBs.

25 ENERGY STORAGE↗