Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generalized gradient approximations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Estimates of Terms in Ohm's Law During an Encounter with an Electron Diffusion Region

We present measurements from the Magnetospheric Multiscale (MMS) mission taken during a reconnection event on the dayside magnetopause which includes a passage through an electron diffusion region (EDR). The four MMS satellites were separated by about 10 km such that estimates of gradients and divergences allow a reasonable estimate of terms in the generalized Ohm's law, which is key to investigating the energy dissipation during reconnection. The strength and character of dissipation mechanisms determines how magnetic energy is released. We show that both electron pressure gradients and electron inertial effects are important, but not the only participants in reconnection near EDRs, since there are residuals of a few mVm (approximately 30-50%) of E+ U(sub e) x B (from the sum of these two terms) during the encounters. These results are compared to a simulation, which exhibits many of the observed features, but where relatively little residual is present.

Torbert, R. B.↗
NASA NTRS1986

Correction of Doppler-broadened Rayleigh backscattering effects in H2O dial measurements

A general method of solutions for treating effects of Doppler-broadened Rayleigh backscattering in H2O Differential Absorption Lidar (DIAL) measurements are described and discussed. Errors in vertical DIAL measuremtns caused by this laser line broadening effect can be very large and, therfore, this effect has to be accounted for accurately. To analyze and correct effects of Doppler-broadened Rayleigh backscattering in DIAL experiments, a generalized DIAL approximation was derived starting from a lidar equation, which includes Doppler broadening. To evaluate the accuracy of H2O DIAL measurements, computer simulations were performed. It was concluded that correction of Doppler broadened Rayleigh backscattering is possible with good accuracy in most cases of tropospheric H2O DIAL measurements, but great care has to be taken when layers with steep gradients of Mie backscattering like clouds or inversion layers are present.

Ansmann, A.↗
NASA NTRS1973

The early evolution of the solar system

The problems of relating collapse conditions in an interstellar cloud to a model of the primitive solar nebula are discussed. In such a nebula there is a radial force balance between gravity, the pressure gradient, and centrifugal forces due to the rotation. Approximate values are given for the combinations of temperature and density throughout the nebula, from a maximum of about 2000 K near the center to less than 200 K in the outer portion. These conditions are based upon the compression adiabats in the terminal stages of the collapse of an interstellar cloud. One general conclusion, of great importance for accumulation of bodies within the solar system, is that interstellar grains should not be completely evaporated at distances in the nebula beyond about one or more astronomical units.

Cameron, A. G. W.↗
DOE OSTI2025

The Langdon effect in laser plasmas: Absorption and conduction

A plasma heated by inverse bremsstrahlung absorption of laser light develops a non-Maxwellian electron distribution function, called the Langdon effect [A. B. Langdon, Phys. Rev. Lett. 44, 575 (1980)]. These non-Maxwellian distributions are sufficiently long-lived to impact the absorption processes itself as well as the transport of heat by electrons. The theory of the Langdon effect in a homogeneous plasma is reviewed to clarify some aspects of Langdon's derivation as well as to confirm that the widely used super-Gaussian approximation works fairly well to describe the shape of the distribution function and reduction of the absorption rate. The Langdon effect on thermal conduction in an inhomogeneous plasma is developed by considering perturbations in a homogeneous absorbing plasma, which develops a heat flux due to both temperature and density gradients. A practical theory of the heat flux is developed by fitting the results of Vlasov–Fokker–Planck simulations, which avoids several approximations that compromised the usefulness of past theoretical predictions, most critically, the effect of electron–electron collisions on the fluxes. The present fits parameterize the coefficients of the temperature gradient (thermal conductivity) and the density gradient for a plasma of any ionization state and for any laser intensity where the theory of the Langdon effect remains locally valid. It is expected that this generalized theory of heat flow in an absorbing plasma will improve the predictive capability of radiation-hydrodynamics simulations of laser-produced plasmas, especially those formed in inertial confinement fusion experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Sensitivity analysis, approximate analysis, and design optimization for internal and external viscous flows

A gradient-based design optimization strategy for practical aerodynamic design applications is presented, which uses the 2D thin-layer Navier-Stokes equations. The strategy is based on the classic idea of constructing different modules for performing the major tasks such as function evaluation, function approximation and sensitivity analysis, mesh regeneration, and grid sensitivity analysis, all driven and controlled by a general-purpose design optimization program. The accuracy of aerodynamic shape sensitivity derivatives is validated on two viscous test problems: internal flow through a double-throat nozzle and external flow over a NACA 4-digit airfoil. A significant improvement in aerodynamic performance has been achieved in both cases. Particular attention is given to a consistent treatment of the boundary conditions in the calculation of the aerodynamic sensitivity derivatives for the classic problems of external flow over an isolated lifting airfoil on 'C' or 'O' meshes.

Taylor, Arthur C., III↗
NASA NTRS1977

Calculation of three-dimensional compressible turbulent boundary layers

From comparisons of high speed data with low speed closure procedures using variable mean density, there does not appear to be any appreciable influence of compressibility upon turbulent shear stress modeling in compressible turbulent boundary layers, even for extreme cases such as Mach 14 to 20 with a change in density across the layer of up to a factor of 100. Other evidence of apparent lack of compressibility caused new physics which may alter the shear stress for the compressible boundary layer cases including: (1) fluctuation Mach number was generally less than 1; (2) the shear stress distribution through the boundary layer was not a function of Mach number for zero pressure gradient flows; (3) the Morkovin hypothesis was valid up to Mach 5 (based on fluctuation data); (4) profile N power was not a function of Mach number, at least up to Mach 10; and (5) the nondimensional burst period was approximately the same as that for low speed.

Source record↗
NASA NTRS1982

Analysis of separated boundary-layer flows

A method for predicting the strong interaction between the viscous and inviscid flows which occurs in flow separation is reviewed. An inverse boundary-layer procedure approximately accounts for normal pressure gradients that may be important in strongly interacting flows. Transformed boundary-layer equations are written in which the pressure gradient is set equal to the inviscid pressure gradient. As the boundary-layer edge is approached and the viscous shear and heat conduction terms vanish, the viscous flow solution is required to asymptotically approach the inviscid solution over the generalized displacement body. Attention is then focused on viscous-inviscid interacting flows with a first-order viscous formulation and constant pressure across the boundary layer. Results obtained with this procedure are presented for: (1) transitional separation bubbles near an airfoil leading edge, (2) subsonic boattail separated turbulent flow, and (3) transonic turbulent shock wave boundary-layer interaction on an axisymmetric bump configuration.

Carter, J. E.↗
NASA NTRS1990

The migration of a compound drop due to thermocapillarity

The quasistatic thermocapillary motion of a compound drop in an unbounded fluid possessing a uniform temperature gradient is analyzed. For completeness, gravitational effects are included in the treatment. The general model is formulated, and the equations for the concentric case are solved using spherical polar coordinates, while the eccentric case is handled using bispherical coordinates. Results are given for the velocity of the drop as well as that of the droplet with respect to the drop, along with useful approximations. Illustrative results are presented graphically for the thermocapillary migration of a compound drop in the special case when the droplet is a gas bubble. In addition to the velocities of the drop and the bubble, representative isotherms and streamlines also are presented which display interesting qualitative features.

Morton, David S.↗
NASA NTRS1972

Lunar soil properties and soil mechanics. Flow in porous media under rarefied gas conditions. Research phase: Fluid conductivity of lunar surface materials

Theoretical and experimental research on fluid conductivity of lunar surface materials is summarized. Theoretical methods were developed for the analysis of transitional and free-molecular flows, and for analysis of lunar permeability probe data in general. Experimental studies of rarefied flows under conditions of a large pressure gradient show flows in the continuum regime to be responsible for the largest portion of the pressure drop between source and sink for one dimensional flow, provided the entrance Knudsen number is sufficiently small. The concept of local similarity leading to a universal nondimensional function of Knudsen number was shown to have approximate validity; flows in all regimes may be described in terms of an area fraction and a single length parameter. Synthetic porous media prepared from glass beads exhibited flow behavior similar in many regards to that of a natural sandstone; studies using artificial stones with known pore configurations may lead to new insight concerning the structure of natural materials. The experimental method involving the use of segmented specimens of large permeability is shown to be fruitful.

Hurlbut, F. C.↗
NASA NTRS1959

A Method for Computing Turbulent Heat Transfer in the Presence of a Streamwise Pressure Gradient for Bodies in High-Speed Flow

A modified Reynolds analogy between skin friction and heat transfer which depends upon local pressure gradient is derived. Exact and approximate solutions are derived from the differential equations; the exact solution is applicable for arbitrary initial (transition) conditions and the approximate solution requires fully developed turbulent flow from stagnation point or leading edge. The exact solution (restricted to stagnation initial conditions) and the approximate solutions are shown to agree with one another within 5 percent when applied to several blunt shapes. The present solutions generally predict the measured heating rates on these bodies within the accuracy of the measurements provided transition began upstream of the peak heating region. The present solutions appear to be sufficiently accurate for design purposes.

Cohen, Nathaniel B.↗
NASA NTRS1992

Partially coherent scattering in stellar chromospheres. II - The first-order escape probability method. III - A second-order escape probability method

Approximate analytic expressions are derived for resonance-line wing diagnostics, accounting for frequency redistribution effects, for homogeneous slabs, and slabs with a constant Planck function gradient. Resonance-line emission profiles from a simplified conceptual standpoint are described in order to elucidate the basic physical parameters of the line-forming layers prior to the performance of detailed numerical calculations. An approximate analytic expression is derived for the dependence on stellar surface gravity of the location of the Ca II and Mg II resonance-line profile peaks. An approximate radiative transfer equation using generalized second-order escape probabilities, applicable even in the presence of nearly coherent scattering in the damping wings of resonance lines, is derived. Approximate analytic solutions that can be applied in special regimes and achieve good agreement with accurate numerical results are found.

Gayley, K. G.↗
NASA NTRS1996

Transport Coefficients in weakly compressible turbulence

A theory of transport coefficients in weakly compressible turbulence is derived by applying Yoshizawa's two-scale direct interaction approximation to the compressible equations of motion linearized about a state of incompressible turbulence. The result is a generalization of the eddy viscosity representation of incompressible turbulence. In addition to the usual incompressible eddy viscosity, the calculation generates eddy diffusivities for entropy and pressure, and an effective bulk viscosity acting on the mean flow. The compressible fluctuations also generate an effective turbulent mean pressure and corrections to the speed of sound. Finally, a prediction unique to Yoshizawa's two-scale approximation is that terms containing gradients of incompressible turbulence quantities also appear in the mean flow equations. The form these terms take is described.

Rubinstein, Robert↗
NASA NTRS1953

On the theory of the turbulent boundary layer

As a rule, a division of the turbulent boundary layer is admissible: a division into a part near the wall, where the flow is governed only by the wall effects, and into an outer part, where the wall roughness and the viscosity of the flow medium affects only the wall shearing stress occurring as boundary condition but does not exert any other influence on the flow. Both parts may be investigated to a large extent independently. Under certain presuppositions there result for the outer part "similar" solutions. The theoretical considerations give a cue how to set up, by appropriate experiments and their evaluation, generally valid connections which are required for the approximate calculation of the turbulent boundary layer according to the momentum and energy theorem.

TURBULENCE↗
NASA NTRS2003

Fabrication And Evaluation Of Sic/Sic Tubes With Various Fiber Architectures

SiC/SiC composites are excellent material candidates for high temperature applications where the performance requirements are high strength, high creep-rupture resistance, high environmental durability, and high thermal conductivity. In the past, the NASA UEET program has demonstrated fabrication of high-performance SiC/SiC flat panels reinforced by Sylramic-iBN SiC fibers. Currently NASA UEET is scaling up this SiC/SiC system by fabrication of more complex shaped components using the same fiber type. This paper reports the effects of various fiber architectures on the processing, mechanical, and durability behavior of small-diameter 0.5" ID SiC/SiC tubes, which are potential sub-elements for leading edges and cooling channels in turbine vanes and blades. Nine different fiber architectures were utilized for construction of seamless tube preforms, from simple 2D jelly-rolling to complex braiding, pin-weaving, filament-winding and 3D orthogonal weaving with approximately 5% fibers in the thru-thickness direction. Using the BN interphase and Sic matrix processing steps established for the flat panels, SiC/SiC tubes were fabricated with wall thicknesses of approximately 60 mils and total fiber fractions of approximately 35%. The "D" split ring tests for hoop tensile properties, micro-structural examinations for relationship between fiber architecture formation and matrix infiltration, and the low-pressure burner rig tests for the high temperature durability under thru-thickness thermal gradient were conducted. The better matrix infiltration and higher hoop strength were achieved using the tri-axial braided and the three-float pin woven SiC/SiC tubes. In general, it needs not only higher hoop direction fibers but also axial direction fibers for the higher hoop strength and the better infiltration, respectively. These results are analyzed to offer general guidelines for selecting fiber pre-form architectures and SiC/SiC processes that maximize tube hoop strength, thru-thickness thermal conductivity, and burner-rig durability under a high thermal gradient.

Yun, H. M.↗
NASA NTRS1987

Recursive inverse kinematics for robot arms via Kalman filtering and Bryson-Frazier smoothing

This paper applies linear filtering and smoothing theory to solve recursively the inverse kinematics problem for serial multilink manipulators. This problem is to find a set of joint angles that achieve a prescribed tip position and/or orientation. A widely applicable numerical search solution is presented. The approach finds the minimum of a generalized distance between the desired and the actual manipulator tip position and/or orientation. Both a first-order steepest-descent gradient search and a second-order Newton-Raphson search are developed. The optimal relaxation factor required for the steepest descent method is computed recursively using an outward/inward procedure similar to those used typically for recursive inverse dynamics calculations. The second-order search requires evaluation of a gradient and an approximate Hessian. A Gauss-Markov approach is used to approximate the Hessian matrix in terms of products of first-order derivatives. This matrix is inverted recursively using a two-stage process of inward Kalman filtering followed by outward smoothing. This two-stage process is analogous to that recently developed by the author to solve by means of spatial filtering and smoothing the forward dynamics problem for serial manipulators.

Rodriguez, G.↗
NASA NTRS1999

A Catalog of Soft X-Ray Shadows, and More Contemplation of the 1/4 KeV Background

This paper presents a catalog of shadows in the 1/4 keV soft X-ray diffuse background 4 (SXRB) that were identified by a comparison between ROSAT All-Sky Survey maps and DIRB&corrected IRAS 100 micron maps. These "shadows" are the negative correlations between the surface brightness of the SXRB and the column density of the Galactic interstellar medium (ISIM) over limited angular regions (a few degrees in extent). We have compiled an extensive but not exhaustive set of 378 shadows in the polar regions of the Galaxy (Absolute value (beta) > and approximately equal 20 deg.), and determined their foreground and background X-ray intensities (relative to the absorbing features), and the respective hardness ratios of that emission. The portion of the sky that was examined to find these shadows was restricted in general to regions where the minimum column density is less than and approximately equal to 4 x 10(exp 20) H/square cm, i.e., relatively high Galactic latitudes, and to regions away from distinct extended features in the SXRB such as supernova remnants and superbubbles. The results for the foreground intensities agree well with the recent results of a general analysis of the local 1/4 KeV emission while the background intensities show additional. but not unexpected scatter. The results also confirm the existence of a gradient in the hardness of the local 1/4 keV emission along a Galactic center/ anticenter axis with a temperature that varies from 10(exp 6.13) K to 10(exp 6.02) K, respectively. The average temperature of the foreground component from this analysis is 10(exp 6.08) K, compared to 10(exp 6.06) K in the previous analysis. Likewise, the average temperature for the distant component for the current and previous analyses are 10(exp 6.06) K and 10(exp 6.02) K, respectively. Finally, the results for the 1/4 keV halo emission are compared to the observed fluxes at 3/4 keV, where the lack of correlation suggests that the Galactic halo's 1/4 keV and 3/4 keV fluxes are likely produced by separate emission regions.

Snowden, S. L.↗
NASA NTRS1982

Observation and modeling of energetic particles at synchronous orbit on July 29, 1977

In the 12 hours immediately after a worldwide storm sudden commencement at 0027 UT on July 29, there was a series of at least four magnetospheric substorms, the last and largest of which exhibited an expansion phase onset at approximately 1200 UT. Data from six spacecraft in three general local time groupings (0300, 0700, and 1300 LT) are examined, and vector magnetic field data and energetic electron and ion data from approximately 15 keV to more than 2MeV are employed. Four primary types of studies are carried out: (1) timing and morphology of energetic particle injections; (2) variation of particle phase space densities, using local magnetic field and particle flux data; (3) measurement of boundary motions, using high-energy ion gradient anisotropies; and (4) adiabatic modeling, which included injection, large-scale convection, corotation, and gradient drifts. For the 1200 UT substorms, it is concluded that there was a substantial flux dropout in a broad sector near local midnight because of a large-scale boundary motion, followed by a recovery to a predropout configuration.

Baker, D. N.↗
NASA NTRS1977

Propeller design by numerical optimization

A computer program designed to optimize propeller characteristics was developed by combining two main programs: the first is the optimization program based on the gradient algorithm; the second is based on a propeller blade element theory and uses an aerodynamics subprogram to approximate the lift and drag characteristics of the NACA 16-series airfoil section. To evaluate the propeller program alone (with its aerodynamics subprogram), propeller characteristics were computed and compared to those from wind tunnel investigations conducted on three different NACA propellers. Although the thrust and power coefficients which were computed using the blade element theory were generally higher than the experimental results for two of the three propellers, the corresponding efficiencies showed good agreement for all three propellers. The propeller optimization program was then used to study the NACA 4-(5)(08)-03 propeller at various Mach numbers from 0.175 to 0.60. Improvements in propeller efficiency and thrust were obtained through the use of the propeller optimization program.

Mendoza, J. P.↗