Results for “HALEU Material” — Page 7

DOE OSTI2025

Participation in and Assessment of the Second DNCSH Public Workshop

The DOE/NRC Criticality Safety for Commercial-Scale HALEU Fuel Cycle and Transportation (DNCSH) project was established through the Inflation Reduction Act of 2022 (H.R. 5376) to support the US Nuclear Regulatory Commission (NRC) and industry in addressing critical experiment validation gaps that impede the licensing basis and regulatory approval of high-assay low-enriched uranium (HALEU) operations. An initial public workshop was held in February 2024 to address HALEU transportation validation gaps. The resulting call for proposals was released in April and resulted in funding for the execution and/or evaluation of 16 critical experiments. A second public workshop was held in August 2025 to address facility and operational validation gaps, precluding a second call for proposals. A list of attendees is provided in APPENDIX A, Table A-1. A total of 319 participants joined the meeting, which was hosted online via Microsoft Teams as well as in person. The slides from the meeting were uploaded online to the NRC’s Agencywide Documents Access and Management System (ADAMS). The meeting agenda is provided in Table 1-1. In preparation for the meeting, a study was performed to examine expected fissile forms for the fuel cycles of various fuel types at different stages of production and the apparent validation gaps. The resulting report, titled “Benchmark Gap Assessment for the Manufacturing of High-Assay Low-Enriched Uranium Fuels,” provided the foundation for the discussions that took place during the workshop. The discussions and the validation gaps in the report were used to develop the second call for proposals. The present report presents the feedback received before, during, and after the second workshop. All the data presented are based on voluntarily self-reported identification, opinions from workshop participants, and survey responses and are assumed to be as accurate as practically reasonable. The discussions during the workshop and the subsequent survey responses were intended to direct attention to industry-specific areas of interest and to collect feedback on the work performed to date by the DNCSH project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Identify and Assess Technical Challenges in Safeguards Measurements of Spent Advanced Reactor Fuels

Advanced reactor (AR) designs use various nuclear fuel types that can be significantly different than conventional light-water reactor (LWR) fuels, including differences in sizes, compositions, and chemical forms (e.g., oxide, carbide, metal). Nearly all the proposed AR fuels use high-assay low-enriched uranium (HALEU), which will have higher enrichments (5–20 wt% 235 U) than LWR fuels (currently limited to <5 wt% 235 U). In advance of the wide use of these new fuel types around the world, international safeguards organizations such as the International Atomic Energy Agency (IAEA]) are working with some of the AR vendors to formulate safeguards approaches for these AR fuel cycles. As part of the overall safeguards approach, it is important to identify the potential technical challenges in performing safeguards verification measurements of these AR fuels (both fresh and spent fuels) in advance of the widespread adoption of these new fuel types, because new safeguards technologies can take several years to develop, test, and approve for use. This report documents work performed in fiscal year 2024 based on modeling and simulation to assess the performance of the existing safeguards measurement technologies for irradiated or spent AR fuel elements or items. This work is a continuation of the work performed in fiscal year 2023 that focused on fresh AR fuels. Spent AR fuels have a distinct difference from their LWR counterparts: unlike the spent LWR fuels typically stored in a water-filled pool, some spent AR fuels—such as tristructural-isotropic (TRISO)-based fuels—will most likely be stored in air-filled hot cells. Because most safeguards measurements on spent fuel performed to date have been conducted under water, the air-filled hot cell environment could present unique challenges to safeguards measurements. Fork detector (FDET) and Cerenkov viewing device (CVD) systems have been the two primary instruments used by the IAEA for several decades to measure spent LWR fuel assemblies stored in pools for safeguards verification purposes. Because the lower refractive index of air causes Cerenkov light to be of lower intensity in air than in water, existing CVDs are likely unable to perform safeguards verification measurements for spent fuel stored in an air-filled hot cell, as is the case for the TRISO-based spent fuel elements (e.g., pebbles, graphite fuel blocks). Unlike FDET measurements, CVD measurements do not require fuel be moved, so they are a simpler and faster to take than FDET measurements. The inability to perform CVD measurements on the TRISO-based AR fuel types presents a major technical challenge in the effort to use existing technology to perform safeguards measurements on spent AR fuels. This study was mainly conducted through the modeling and simulation of an FDET or an FDET-like system on five spent AR fuel types, including one metallic fuel type and four TRISO-based fuel types in both pebble and graphite block forms in their respective storage configurations and environments. Because the various AR fuel types have significantly different dimensions, FDET systems must be adapted to accommodate them. Partial defect tests were also simulated in this study to assess the FDET’s ability to detect potential fuel diversions. The FDET measures the fuel’s total passive neutron and gamma emissions. The simulated FDET results from spent AR fuel items are compared against results from a typical spent pressurized water reactor (PWR) assembly. High-purity germanium (HPGe) gamma detector measurements were also simulated for the spent AR fuel types and the PWR assembly because the signature photopeaks have been used in LWR safeguards verifications, although HPGe is usually not used to detect diversions because of the fuel’s self-attenuation effects on those photopeaks. The results indicate that these detectors have significant challenges in performing safeguards measurements of the spent AR fuel items, including incompatibilities between AR fuel items and existing FDETs, lower neutron count rates, lower sensitivities to fuel diversions in certain AR fuel items, and significantly higher interference from a neighboring fuel item when the measurement is performed in air. These results suggest that an alternative technology or significant and timely technology development is needed to perform adequate safeguards measurements of some of these AR fuel items.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗