Search NASA⌕ Search

SEARCH · Search NASA

Results for “HALL GENERATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Separation of Artifacts from Spin–Torque Ferromagnetic Resonance Measurements of Spin–Orbit Torque for the Low–Symmetry Van der Waals Semi–Metal ZrTe 3

Spin-orbit torques generated by exfoliated layers of the low-symmetry semi-metal ZrTe 3 are measured using the spin-torque ferromagnetic resonance (ST-FMR) technique. When the ZrTe 3 has a thickness greater than about 10 nm, artifacts due to spin pumping and/or resonant heating can cause the standard ST-FMR analysis to overestimate the true magnitude of the torque efficiency by as much as a factor of 30, and to indicate incorrectly that the spin-orbit torque depends strongly on the ZrTe 3 layer thickness. Artifact-free measurements can still be achieved over a substantial thickness range by the method developed recently to detect ST-FMR signals in the Hall geometry as well as the longitudinal geometry. ZrTe 3 /Permalloy samples generate a conventional in-plane anti-damping spin torque efficiency ξ$^{FL}_{∥}$ = 0.014 ± 0.004, and an unconventional in-plane field-like torque efficiency |ξ$^{FL}_{∥}$| = 0.003 ± 0.001. As a result, the out-of-plane anti-damping torque is negligible. It is suggested that artifacts similarly interfere with the standard ST-FMR analysis for other van der Waals samples thicker than about 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Thermally generated spin current in the topological insulator Bi 2 Se 3

We present measurements of thermally generated transverse spin currents in the topological insulator Bi2Se3, thereby completing measurements of interconversions among the full triad of thermal gradients, charge currents, and spin currents. We accomplish this by comparing the spin Nernst magneto-thermopower to the spin Hall magnetoresistance for bilayers of Bi 2 Se 3 /CoFeB. We find that Bi 2 Se 3 does generate substantial thermally driven spin currents. A lower bound for the ratio of spin current density to thermal gradient is $\frac{J_{s}}{∇_{x}T}$ = (4.9 ± 0.9) × 10 6 ($\frac{ℏ}{2e}$) $\frac{A m^{-2}}{K μm^{-1}}$, and a lower bound for the magnitude of the spin Nernst ratio is -0.61 ± 0.11. The spin Nernst ratio for Bi 2 Se 3 is the largest among all materials measured to date, two to three times larger compared to previous measurements for the heavy metals Pt and W. Strong thermally generated spin currents in Bi 2 Se 3 can be understood via Mott relations to be due to an overall large spin Hall conductivity and its dependence on electron energy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Strongly Surface State Carrier‐Dependent Spin–Orbit Torque in Magnetic Topological Insulators

Abstract The topological surface states (TSS) in topological insulators (TIs) can exert strong spin–orbit torque (SOT) on adjacent magnetization, offering great potential in implementing energy‐efficient magnetic memory devices. However, there are large discrepancies among the reported spin Hall angle values in TIs, and its temperature dependence still remains elusive. Here, the spin Hall angle in a modulation‐doped Cr‐Bi x Sb 2− x Te 3 (Cr‐BST) film is quantitatively determined via both transport and optic approaches, where consistent results are obtained. A large spin Hall angle of ≈90 in the modulation‐doped Cr‐BST film is demonstrated at 2.5 K, and the spin Hall angle drastically decreases to 0.3–0.5 as the temperature increases. Moreover, by tuning the top TSS carrier concentration, a competition between the top and bottom TSS in contributing to SOT is observed. The above phenomena can account for the large discrepancies among the previously reported spin Hall angle values and reveal the unique role of TSS in generating SOT.

Che, Xiaoyu↗
DOE OSTI2021

Conduction via surface states in antiferromagnetic Mott-insulating Ni S 2 single crystals

Pyrite structure transition-metal disulfides exhibit diverse ground states vs d-band filling, spanning diamagnetic semiconducting, ferromagnetic metallic, antiferromagnetic Mott insulating, and superconducting in FeS 2 , CoS 2 , NiS 2 , and CuS 2 . NiS is particularly interesting and poorly understood as its Mott insulating behavior is accompanied by complex antiferromagnetic ordering below ~38 K and perplexing weak ferromagnetism below ~30 K. Temperature-, pressure-, and composition-dependent insulator-metal transitions also occur, particularly in bandwidth-controlled NiS 2–x Se x , hole-doped Ni 1–x Co x S 2 , etc. Here, we use high-quality chemical-vapor-transport-grown NiS 2 single crystals characterized by x-ray diffraction, energy-dispersive x-ray spectroscopy, magnetometry, and extensive transport and magnetotransport measurements, to generate new insight into this system. In particular, resistivity, magnetoresistance, and Hall effect analyses vs temperature, thickness, and surface preparation, provide unequivocal evidence of surface conduction, where the more conductive surface shunts essentially all current at low temperatures. The surface transport changes from two dimensional and insulating to three dimensional and metallic as the surface preparation is varied (also displaying intriguing sensitivity to magnetic ordering), significantly clarifying literature ambiguities with respect to the electronic ground state. These results have immediate implications. First, the temperature-, pressure-, and composition-dependent insulator-metal transitions deduced in the extensive prior work on NiS 2-x Se x , Ni 1–x Co x S 2 , etc., must clearly be reexamined in light of rife metallic surface conduction, not previously taken into account. Second, NiS 2 now joins FeS 2 and CoS 2 as systems in which bulk and surface electronic behaviors are strikingly different, suggesting that metallic surface states could be a universal feature of pyrite structure transition-metal disulfides.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Solar Arrays for Direct-Drive Electric Propulsion: Arcing at High Voltages

The results from an experimental investigation to assess arcing during operation of high voltage solar arrays in a plasma environment are presented. The experiments were part of an effort to develop systems that would allow safe operation of Hall-Effect Thrustefls) in direct-drive mode. Arc discharges are generated when the array is biased negative with respect to the plasma. If sustained for long periods of time between adjacent solar cells, arcs may severely damage a solar array, thus significantly shortening its lifetime. Most often sustained arcs are triggered by plasma produced during short-duration discharge arcs (approximately 20 microseconds). These trigger arcs are sparked between the semiconducting cell and the covering dielectric. Both trigger and sustained (greater than 1 millisecond) arcs have been captured during the tests. Current and voltage waveforms associated with the different arc events are presented. The test results have defined operational limits (thresholds) for the various array concepts studied that minimize the likelihood of damage from sustained arcs. Experimental trends regarding the effect of the solar array substrate on arc duration are also presented.

Schneider, Todd A.↗
NASA NTRS1972

Status of power generation experiments in the NASA Lewis closed-cycle MHD facility.

In this paper the design and operation of the closed-cycle MHD facility is discussed and results obtained in recent experiments are presented. The main components of the facility are a compressor, recuperative heat exchanger (preheater), heater, nozzle, MHD channel with 28 pairs of thoriated tungsten electrodes, cesium condenser, and an argon cooler. The heater can supply 1.1 MW of thermal power to a 2.27 kg/sec gas stream. The facility has been operated at temperatures up to 2100 K with a cesium-seeded argon working fluid. At low magnetic field strengths (B = 0.2 T), the open circuit voltage, Hall voltage and short circuit current obtained are 90, 69, and 47 percent of the theoretical equilibrium values, respectively. The Hall voltage and short circuit current decrease sharply with increasing magnetic field strength, however. Comparison of these data with a wall and boundary layer leakage theory indicates that the generator has shorting paths in the Hall direction.

Sovie, R. J.↗
DOE OSTI2022

Tilted spin current generated by the collinear antiferromagnet ruthenium dioxide

Symmetry plays a central role in determining the polarization of spin currents induced by electric fields. It also influences how these spin currents generate spin-transfer torques in magnetic devices. Here, we show that an out-of-plane damping-like torque can be generated in ruthenium oxide (RuO 2 )/permalloy devices when the Néel vector of the collinear antiferromagnet RuO 2 is canted relative to the sample plane. By measuring characteristic changes in all three components of the electric-field-induced torque vector as a function of the angle of the electric field relative to the crystal axes, we find that the RuO 2 generates a spin current with a well-defined tilted spin orientation that is approximately parallel to the Néel vector. A maximum out-of-plane damping-like spin torque efficiency per unit electric field of 7±1 × 10 3 Ω -1 m -1 is measured at room temperature. Here, the observed angular dependence indicates that this is an antiferromagnetic spin Hall effect with symmetries that are distinct from other mechanisms of spin-current generation reported in antiferromagnetic and ferromagnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1971

Status of power generation experiments in the NASA Lewis closed cycle MHD facility

The design and operation of the closed cycle MHD facility is discussed and results obtained in recent experiments are presented. The main components of the facility are a compressor, recuperative heat exchanger, heater, nozzle, MHD channel with 28 pairs of thoriated tungsten electrodes, cesium condenser, and an argon cooler. The facility has been operated at temperatures up to 2100 K with a cesium-seeded argon working fluid. At low magnetic field strengths, the open circuit voltage, Hall voltage and short circuit current obtained are 90, 69, and 47 percent of the theoretical equilibrium values, respectively. Comparison of this data with a wall and boundary layer leakage theory indicates that the generator has shorting paths in the Hall direction.

Sovie, R. J.↗
DOE OSTI2022

Direct current magnetic Hall probe technique for measurement of field penetration in thin film superconductors for superconducting radio frequency resonators

Superconducting Radio Frequency (SRF) cavities used in particle accelerators are typically formed from or coated with superconducting materials. Currently, high purity niobium is the material of choice for SRF cavities that have been optimized to operate near their theoretical field limits. This brings about the need for significant R & D efforts to develop next generation superconducting materials that could outperform Nb and keep up with the demands of new accelerator facilities. To achieve high quality factors and accelerating gradients, the cavity material should be able to remain in the superconducting Meissner state under a high RF magnetic field without penetration of quantized magnetic vortices through the cavity wall. Therefore, the magnetic field at which vortices penetrate a superconductor is one of the key parameters of merit of SRF cavities. Techniques to measure the onset of magnetic field penetration on thin film samples need to be developed to mitigate the issues with the conventional magnetometry measurements that are strongly influenced by the film orientation and shape and edge effects. In this work, we report the development of an experimental setup to measure the field of full flux penetration through films and multi-layered superconductors. Our system combines a small superconducting solenoid that can generate a magnetic field of up to 500 mT at the sample surface and three Hall probes to detect the full flux penetration through the superconductor. We report this setup can be used to study alternative materials that could potentially outperform niobium, as well as superconductor–insulator–superconductor (SIS) multilayer coatings on niobium.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

THz generation by exchange-coupled spintronic emitters

Abstract The mechanism of THz generation in ferromagnet/metal (F/M) bilayers has been typically ascribed to the inverse spin Hall effect (ISHE). Here, we fabricated Pt/Fe/Cr/Fe/Pt multilayers containing two back-to-back spintronic THz emitters separated by a thin ( t Cr ≤ 3nm) wedge-shaped Cr spacer. In such an arrangement, magnetization alignment of the two Fe films can be controlled by the interplay between Cr-mediated interlayer exchange coupling (IEC) and an external magnetic field. This in turn results in a strong variation of the THz amplitude A , with A ↑ ↓ reaching up to 14 times A ↑ ↑ (arrows indicate the relative alignment of the magnetization of the two magnetic layers). This observed functionality is ascribed to the interference of THz transients generated by two closely spaced THz emitters. Moreover, the magnetic field dependence A ( H ) shows a strong asymmetry that points to an additional performance modulation of the THz emitter via IEC and multilayer design.

Adam, Roman↗
NASA NTRS1973

MHD Generator Performance Limitations

The electrical properties of the gas are the primary limiting factor to MHD generator performance; the most relevant electrical properties are the conductivity and the Hall parameter. The maximum allowable pressure at several given levels of power extration vs. temperature is represented graphically.

Rosa, R. J.↗
NASA NTRS1989

Currents between tethered electrodes in a magnetized laboratory plasma

Laboratory experiments on important plasma physics issues of electrodynamic tethers were performed. These included current propagation, formation of wave wings, limits of current collection, nonlinear effects and instabilities, charging phenomena, and characteristics of transmission lines in plasmas. The experiments were conducted in a large afterglow plasma. The current system was established with a small electron-emitting hot cathode tethered to an electron-collecting anode, both movable across the magnetic field and energized by potential difference up to V approx.=100 T(sub e). The total current density in space and time was obtained from complete measurements of the perturbed magnetic field. The fast spacecraft motion was reproduced in the laboratory by moving the tethered electrodes in small increments, applying delayed current pulses, and reconstructing the net field by a linear superposition of locally emitted wavelets. With this technique, the small-amplitude dc current pattern is shown to form whistler wings at each electrode instead of the generally accepted Alfven wings. For the beam electrode, the whistler wing separates from the field-aligned beam which carries no net current. Large amplitude return currents to a stationary anode generate current-driven microinstabilities, parallel electric fields, ion depletions, current disruptions and time-varying electrode charging. At appropriately high potentials and neutral densities, excess neutrals are ionized near the anode. The anode sheath emits high-frequency electron transit-time oscillations at the sheath-plasma resonance. The beam generates Langmuir turbulence, ion sound turbulence, electron heating, space charge fields, and Hall currents. An insulated, perfectly conducting transmission line embedded in the plasma becomes lossy due to excitation of whistler waves and magnetic field diffusion effects. The implications of the laboratory observations on electrodynamic tethers in space are discussed.

Stenzel, R. L.↗
NASA NTRS2015

Superlattice Infrared Photodetector Research at the Jet Propulsion Laboratory

III-V semiconductors offer a highly effective platform for the development of sophisticated heterostructure-based MWIR and LWIR detectors, as exemplified by the high-performance double heterostructure (DH) nBn, XBn, and type- II superlattice infrared detectors. A key enabling design element is the unipolar barrier, which is used to implement the complementary barrier infra-red detector (CBIRD) design for increasing the collection efficiency of photo-generated carriers, and reducing dark current generation without impeding photocurrent flow. Heterostructure superlattice detectors that make effective use of unipolar barriers have demonstrated strong reduction of generation-recombination (G-R) dark current due to Shockley-Read-Hall (SRH) processes. In the last several years we solely focused on the development of antimonide based IR detectors. Recently, we demonstrated RoA values over 14,000 Ohm sq cm for a 9.9 micron cutoff device by incorporating electron-blocking and hole-blocking unipolar barriers. This device has shown 300K BLIP operation with f/2 optics at 87 K with blackbody D* of 1.1x10(exp 11) cm Hz1/2/W.

focal planes↗
NASA NTRS1979

Results of duct area ratio changes in the NASA Lewis H2-O2 combustion MHD experiment

MHD power generation experiments utilizing a cesium-seeded H2-O2 working fluid were carried out using a diverging area Hall duct having an entrance Mach number of 2. The experiments were conducted in a high field strength cryomagnet facility at field strengths up to 5 tesla. The effects of power takeoff location, generator loading B field strength, and electrode breakdown voltage were investigated. The effect of area ratio, multiple loading of the duct, and duct location within the magnetic field are considered.

Smith, J. M.↗
NASA NTRS1980

Experiments on H2-O2MHD power generation

Magnetohydrodynamic power generation experiments utilizing a cesium-seeded H2-O2 working fluid were carried out using a diverging area Hall duct having an entrance Mach number of 2. The experiments were conducted in a high-field strength cryomagnet facility at field strengths up to 5 tesla. The effects of power takeoff location, axial duct location within the magnetic field, generator loading, B-field strength, and electrode breakdown voltage were investigated. For the operating conditions of these experiments, it is found that the power output increases with the square of the B-field and can be limited by choking of the channel or interelectrode voltage breakdown which occurs at Hall fields greater than 50 volts/insulator. Peak power densities of greater than 100 MW/cu M were achieved.

Smith, J. M.↗
DOE OSTI2024

Three-dimensional modeling of a plasma in a strong azimuthal magnetic field

Three-dimensional magnetohydrodynamic (MHD) simulations are able to model the generation of disc-shaped plasma, driven by laser ablation from a current carrying rod in a pulsed-power machine producing azimuthal magnetic fields of 2–3 MG. The plasma at such extreme conditions is unique in that the parameter space for the plasma β and Hall parameter χ transition from below unity to greater than unity at different stages of the plasma generation. In simulations, the formation of the plasma disc in the azimuthal direction, is driven by heat flux from the laser spot and depends on the set of transport coefficients used in simulations. The most recent set of transport coefficients leads to the formation of plasma ejecta at the back end of the rod, that qualitatively matches experiments. Specifically, the cross-gradient Nernst effect, which twists magnetic field, is shown to have a large effect on the shape of the back end ejecta. In the direction along the axis of the rod there is propagation of perturbations from the disc as observed in experiments. In simulations the period of temperature perturbations is in good agreement with experimental results. Furthermore, an instability due to coupling of heat flux and the magnetic field advection provides a possible explanation for perturbation growth along the axis of the rod, and the instability growth rate is consistent with experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗