Search NASA⌕ Search

SEARCH · Search NASA

Results for “HARMONIC EXCITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Hypersonic Wake Velocity Measurements Using Acetone Molecular Tagging Velocimetry

A non-intrusive laser diagnostic known as molecular tagging velocimetry was used to find quantitative off-body velocity measurements in the wake of a sphere in the Mach 7 Ludwieg Tube Wind Tunnel located at The University of Texas at San Antonio. Acetone gas seeded in the flow was excited using the 4th harmonic of a pulse-burst Nd:YAG laser. The experimental results were used to validate and compare to simulations using a continuous Galerkin flow solver. Both the experimental and simulated results agreed on negative velocities in the viscous shear layer. Near the centerline of the sphere, average velocities of -200 m/s were observed due to reverse flow in the recirculation region. Outside of the shear layer, velocities of 800 m/s were observed in both the experimental and simulated results. The overall average uncertainty for the strut-mounted and free-flight case was estimated to be ±27 m/s. The flow features of the wake were visualized using schlieren imaging, and the experimental results agreed well with the simulated results.

Shoemake, Lawton↗

Turbulence characteristics of the noise producing region of an excited round jet. II - Large scale structure characteristics

A conditional sampling of digital hot wire records obtained at several radial positions of an axisymmetric jet indicates the existence of regions within the mixing layer which are more orderly than a fully chaotic turbulent flow. A Fourier decomposition of the flow has shown that most of the turbulent energy is contained in the fundamental frequency of the excitation and the first harmonic.

Baltas, C.↗

Coupling into and scattering from cylindrical structures covered periodically with metallic patches

Circular cylindrical structures covered periodically with metallic patches are considered. After an analogy to planar periodic surfaces is shown, formulations are presented for calculating induced currents on the curved surface. The equations are solved and results calculated for the specific case of periodic strips on the cylindrical surface. For a cylindrical structure a two-dimensional periodicity exists, as in a planar structure, while a spherical structure allows only a rotational periodicity. When the cylindrical structure is excited by the characteristic harmonic of the system, the spectral response of the transmitted field exhibits resonances that depend on the surface periodicity, as is known for planar structures. Since the cylindrical structure contains finite closed regions, the effects of resonances internal to the structure are seen and give additional information as compared to planar structures.

Cwik, Tom↗

Observed temporal variations in the Earth's gravity field from 16-year Starlette orbit analysis

Satellite laser ranging data to Starlette, collected during the period from 1975 to 1990, are analyzed to determine yearly values of the second degree annual (Sa) and semiannual (Ssa) tides, simultaneously with average values of other low degree and order tide parameters. The yearly fluctuations in the values for Sa and Ssa are associated with changes in the Earth's second degree zonal harmonic caused by meteorological excitation. The Starlette-determined mean values for the amplitude of the annual and semiannual variations in J2 are 32.3 x 10 exp -11 and 19.5 x 10 exp -11, respectively; while the rms about the mean values are 4.1 x 10 exp -11 and 6.3 x 10 exp -11, respectively. The annual delta-J2 is in good agreement with the value obtained from the combined effects of air mass redistribution without the oceanic inverted-barometer effects (non-IB) and hydrological change. Approximately 90 percent of the observed annual variation from Starlette is attributed to the meteorological mass redistribution occurring on the Earth's surface.

Cheng, M. K.↗

Ultrasonic Resonance Spectroscopy of Composite Rings for Flywheel Rotors

Flywheel energy storage devices comprising multilayered composite rotor systems are being studied extensively for utilization in the International Space Station. These composite material systems were investigated with a recently developed ultrasonic resonance spectroscopy technique. The system employs a swept frequency approach and performs a fast Fourier transform on the frequency spectrum of the response signal. In addition. the system allows for equalization of the frequency spectrum, providing all frequencies with equal amounts of energy to excite higher order resonant harmonics. Interpretation of the second fast Fourier transform, along with equalization of the frequency spectrum, offers greater assurance in acquiring and analyzing the fundamental frequency, or spectrum resonance spacing. The range of frequencies swept in a pitch-catch mode was varied up to 8 MHz, depending on the material and geometry of the component. Single and multilayered material samples, with and without known defects, were evaluated to determine how the constituents of a composite material system affect the resonant frequency. Amplitude and frequency changes in the spectrum and spectrum resonance spacing domains were examined from ultrasonic responses of a flat composite coupon, thin composite rings, and thick composite rings. Also, the ultrasonic spectroscopy responses from areas with an intentional delamination and a foreign material insert, similar to defects that may occur during manufacturing malfunctions, were compared with those from defect-free areas in thin composite rings. A thick composite ring with varying thickness was tested to investigate the full-thickness resonant frequency and any possible bulk interfacial bond issues. Finally, the effect on the frequency response of naturally occurring single and clustered voids in a composite ring was established.

Harmon, Laura M.↗

Analyses of Injection-Coupled Combustion Instability from J-2X Gas Generator Development

During development of the gas generator for the liquid oxygen/liquid hydrogen propellant J-2X rocket engine, combustion instabilities were observed near the frequency of the first longitudinal acoustic mode of the hot gas combustion chamber duct. These instabilities were similar to intermediate-frequency or buzz-type instabilities as described in historical programs, except for several aspects: 1) the frequencies were low, in the realm of chug; 2) at times the instability oscillation amplitudes were quite large, with peak-to-peak amplitudes exceeding 50% of the mean chamber pressure along with the appearance of harmonics; 3) the chamber excitation was related to but not exactly at the first longitudinal combustion chamber acoustic mode; and 4) the injector provided mass flow rate oscillations induced by capacitance and inertance effects in the injector rather than by organ pipe resonances of the coaxial oxidizer posts. This type of combustion instability is referred to as "injection coupling" because one critical driving source of the instability is mass flow rate oscillations from the injector. However, the type of injection coupling observed here is different than observed in previous instances of buzz instability with coaxial injectors, because of the lower frequencies and lack of influence from the oxidizer post organ pipe resonances. Test data and preliminary analyses of the initial combustion instabilities were presented in several papers at the 5th Liquid Propulsion Subcommittee meeting. Since that time, additional hot-fire tests with several new hardware configurations have been conducted, and additional analyses have been completed. The analytical models described in previous papers have been updated to include the influences of new geometrical configurations, including a different oxidizer injector manifold configuration and a branch pipe in the hot gas duct that supplies gaseous helium during the start transient to pre-spin the turbine. In addition, the analysis methodology has been revisited to evaluate the potential influence of a combustion response as well as an injection response.

Hulka, James R.↗

Ion sheath effects on RF plasma probes - Experimental results in laboratory plasmas

Laboratory work dealing with the frequency characteristic of the plasma impedance of spherical and cylindrical electrode systems is reported. The influence of the ion sheath on various features of the impedance characteristic is emphasized. Those features are the series and parallel resonance as well as additional resonances due to the excitation of electroacoustic and cyclotron harmonic waves. The dependence of the series and parallel resonances on dc biasing leads to a method of determining the ion sheath capacity for a cylindrical electrode system. The obtained values agree fairly well with those obtained from a theoretical model for the density and potential distribution in the sheath of a cylindrical sensor aligned with a supersonic plasma flow. The amplitude of resonances due to excitation of longitudinal plasma waves (electroacoustic and cyclotron harmonic) is reduced or even vanishes for sufficiently negative dc bias. Positive bias first leads to an increased amplitude up to a certain dc bias value above which, however, the amplitude decreases again due to electron absorption at the sensor surface.

Kist, R.↗

On acoustic radiation from a vibrating panel

An experimental and numerical study of the response and radiation from an acoustically loaded aircraft panel is presented. In the experiment, the panel is excited by a normally incident, harmonic wave. Measurements of the panel response and the resulting transmitted pressure are made in both the near- and acoustic far-fields. The numerical computations model the experiment and in particular account for the full coupling between the panel and the surrounding three dimensional acoustic fluid. The results demonstrate that for a sufficiently high excitation level, the panel response becomes nonlinear. The nonlinearity is characterized by the appearance of harmonics and subharmonics in the power spectral densities of the panel motion and consequently in the resulting acoustic radiation. The primary characteristic of the far-field acoustic radiation is the increase in harmonic content relative to the fundamental and subharmonics with increasing distance from the panel. This is shown to be a result of linear and weakly nonlinear wave propagation effects. The numerical results show that the radiated far-field pressure is strongly dependent on the position of the measurement point with respect to the panel center. The experimental and numerical results are in good qualitative agreement.

Frendi, Abdelkader↗

Non-linear analysis of vibrations of irregular plates

A numerical perturbation method is used to investigate the forced vibrations of irregular plates. Nonlinear terms associated with the midplane stretching are retained in the analysis. The numerical part of the method involves the use of linear, finite element techniques to determine the free oscillation mode shapes and frequencies and to obtain the linear midplane stress resultants caused by the midplane stretching. Representing the solution as an expansion in terms of these linear mode shapes, these modes and the resultants are used to determine the equations governing the time-dependent coefficients of this expansion. These equations are solved by using the method of multiple scales. Specific solutions are given for the main-resonant vibrations of an elliptical plate in the presence of internal resonances. The results indicate that modes other than the driven mode can be drawn into the steady state response. Though the excitation is composed of a single harmonic, the response may not be periodic. Moreover, the particular types of responses that can occur are highly dependent on the mode being excited and are sensitive to small geometrical changes.

Lobitz, D. W.↗

Evolution of streamwise vortices and generation of small-scale motion in a plane mixing layer

The present study investigates the evolution of streamwise vortices in a plane mixing layer and their role in the generation of small-scale 3D motion in a closed-return water facility. Spanwise-periodic streamwise vortices are excited by a time-harmonic wavetrain with spanwise-periodic amplitude variations synthesized by a mosaic of 32 surface film heaters flush-mounted on the low partition. The onset of streamwise vortices is accompanied by significant distortion in the transverse distribution of the streamwise velocity component. The presence of inflexion points, absent in corresponding velocity distributions of the unforced flow, suggests the formation of locally unstable regions of large shear in which broadband perturbations already present in the base flow undergo rapid amplification, followed by breakdown to small-scale motion. The cores of the primary vortices are significantly altered as a result of spanwise nonuniform excitation. The 3D features of the streamwise vortices and their interaction with the base flow are inferred from surfaces or rms velocity fluctuations and an approximation to cross-stream vorticity using 3D single component velocity data.

Nygaard, K. J.↗

Subharmonic and fundamental high amplitude excitation of an axisymmetric jet

A circular jet was excited simultaneously by two different harmonically related tones. Data for three pairs of Strouhal numbers (St(D) = f*D/U (sub j) = 0.2 and 0.4, 0.3 and 0.6, 0.4 and 0.8). For each case the initial phase difference between the two waves was varied in steps of 45 deg, for one full cycle and the level of the fundamental and subharmonic forcing were varied independently over the range of 0.1 to 7 percent of the jet exit velocity. Our initial findings concurred with published findings, such as a critical level of the fundamental is required for subharmonic augmentation, the initial phase difference is critical in determining whether the subharmonic is augmented or suppressed. The detailed documentation of several aspects of this phenomenon all measured in one and the same experimental facility in a controlled manner, bring out several important points that eluded previous researchers: (1) At high amplitudes of the fundamental and subharmonic forcing levels the subharmonic augmentation is independent of the initial phase difference. (2) Contrary to the earlier belief that stable pairing could be produced only with an initial laminar boundary layer, the present work shows that by the two-frequency excitation method this phenomenon can be induced over a range of conditions for a jet with an initially turbulent boundary layer. (3) It is seen that two-frequency excitation is indeed more effective than single frequency excitation in jet mixing enhancement. Higher spreading rates seem to go along with higher subharmonic levels.

Raman, Ganesh↗

Harmonic and Subharmonic RF Injection Locking of THz Metasurface Quantum-Cascade VECSEL

Harmonic and subharmonic RF injection locking is demonstrated in a terahertz (THz) quantum-cascade vertical-external-cavity surface-emitting laser (QC-VECSEL). By tuning the RF injection frequency around integer multiples and submultiples of the cavity round-trip frequency, different harmonic and subharmonic orders can be excited in the same device. Modulation-dependent behavior of the device has been studied with recorded lasing spectral broadening and locking bandwidths in each case. In particular, harmonic injection locking results in the observation of harmonic spectra with bandwidths over 200 GHz. A semiclassical Maxwell-density matrix formalism has been applied to interpret QC-VECSEL dynamics, which aligns well with experimental observations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Geodesic synchrotron radiation

This paper presents the results and methods of computing the high-frequency radiation emitted by freely falling particles moving in circular geodesic orbits in a spherically symmetric gravitational field. The high-frequency radiation, to which the methods of this paper apply, is the principal part of radiated energy only in the case of a particle moving in a highly relativistic, and therefore unstable, circular geodesic. The geodesic synchrotron radiation emitted in this case shows excitation of high-frequency harmonics and a narrow angular distribution. A Green's-function solution of the scalar wave equation is obtained using WKB methods. For application to relativistic circular orbits, a parabolic WKB approximation is required and yields solutions in terms of parabolic cylinder functions.

Breuer, R. A.↗

Concepts for the design of a completely active helicopter isolation system using output vector feedback

The theory of output vector feedback (a few measured quantities) is used to derive completely active oscillation isolation functions for helicopters. These feedback controller concepts are tested with various versions of the BO 105 helicopter and their performance is demonstrated. A compensation of the vibrational excitations from the rotor and harmonics of the number of blades are considered. There is also a fast and automatic trim function for maneuvers.

Schulz, G.↗

Propagation of flexural and membrane waves with fluid loaded NASTRAN plate and shell elements

Modeling of flexural and membrane type waves existing in various submerged (or in vacuo) plate and/or shell finite element models that are excited with steady state type harmonic loadings proportioned to e(i omega t) is discussed. Only thin walled plates and shells are treated wherein rotary inertia and shear correction factors are not included. More specifically, the issue of determining the shell or plate mesh size needed to represent the spatial distribution of the plate or shell response is of prime importance towards successfully representing the solution to the problem at hand. To this end, a procedure is presented for establishing guide lines for determining the mesh size based on a simple test model that can be used for a variety of plate and shell configurations such as, cylindrical shells with water loading, cylindrical shells in vacuo, plates with water loading, and plates in vacuo. The procedure for doing these four cases is given, with specific numerical examples present only for the cylindrical shell case.

Kalinowski, A. J.↗

Mantle rheology and satellite signatures from present-day glacial forcings

Changes in the long-wavelength region of the earth's gravity field resulting from both present-day glacial discharges and the possible growth of the Antarctic ice sheet are considered. Significant differences in the responses between the Maxell and Burger body rheologies are found for time spans of less than 100 years. The quantitative model for predicting the secular variations of the gravitational potential, and means for incorporating glacial forcings, are described. Results are given for the excitation of the degree two harmonics. It is suggested that detailed satellite monitoring of present-day ice movements in conjunction with geodetic satellite missions may provide a reasonable alternative for the esimation of deep mantle viscosity.

Sabadini, Roberto↗

Core instability of the spanwise vortices in a plane mixing layer

A spanwise core instability of the primary vortices in a plane mixing layer has been identified as a viable mechanism for the generation of streamwise vortical structures far downstream of the flow partition. The core instability is excited by a time-harmonic wave train with spanwise phase variation, synthesized by a mosaic of individually controlled surface heaters flush mounted on the flow partition. The flow is visualized in planes of constant cross-stream elevation by means of a schlieren system. As a result of the forcing, the primary vortices undergo spanwise deformations that induce secondary vortical structures, the shape and strength of which depends on the magnitude of the prescribed spanwise phase variation. The appearance of small-scale structures within the large coherent vortices suggests that core instability is an important contributor to mixing.

Nygaard, Kris J.↗