Search NASA⌕ Search

SEARCH · Search NASA

Results for “HUBBLE SPACE TELESCOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Lessons learned in the development of the Hubble Space Telescope software

The lessons learned in the development of the Hubble Space Telescope software are described. Those aspects of the development that were successful are discussed. Areas which in retrospective analysis could have been more efficient are identified. It is concluded that few hardware oriented project managers understand or are comfortable with software technology. Most managers overestimate the size and magnitude of the complex tasks assigned.

Harrington, Michael↗
NASA NTRS1991

Results of a technical analysis of the Hubble Space Telescope nickel-cadmium and nickel-hydrogen batteries

The Hubble Space Telescope (HST) Program Office requested the expertise of the NASA Aerospace Flight Battery Systems Steering Committee (NAFBSSC) in the conduct of an independent assessment of the HST's battery system to assist in their decision of whether to fly nickel-cadmium or nickel-hydrogen batteries on the telescope. In response, a subcommittee to the NAFBSSC was organized with membership comprised of experts with background in the nickel-cadmium/nickel-hydrogen secondary battery/power systems areas. The work and recommendations of that subcommittee are presented.

Manzo, Michelle A.↗
NASA NTRS1991

Prelaunch self-discharge and charge-acceptance characteristics of the Hubble Space Telescope nickel hydrogen batteries

Tests performed at NASA/MSFC on the Hubble Space Telescope (HST) nickel-hydrogen batteries (flight spare module and flight spare battery) were used to determine self-discharge and charge-acceptance characteristics when the batteries were exposed to charged wet-stand conditions, pulse charging on the launch pad, and battery capacity at solar array deployment. An equation is presented which was used to predict the capacity that would be available in the HST NiH2 batteries after an extended stand time on the launch pad plus up to 2 days on orbit prior to solar array deployment (either ground power or orbiter power were used to supply HST loads until shortly before the solar arrays were deployed). It is shown that a fairly accurate estimate of the available capacity was made.

Lanier, John R., Jr.↗
NASA NTRS1993

Focus history of the Hubble Space Telescope: Launch to May 1993

Since the launch of the Hubble Space Telescope (HST) the secondary mirror of the telescope has been moved several times in order to collimate the telescope and also to define a position of best focus. In addition to these moves the focus position changes over time because of water desorption by the graphite epoxy in the metering truss. The authors report here the focus history of the telescope based on a knowledge of the mirror moves made and an analysis of desorption monitoring data obtained by the Faint Object Camera (FOC) in the F/96 mode and of the routine calibration data obtained by the Wide Field and Planetary Cameras. Focus values are extracted using two different methods. In the first method the distance between the center of the point spread function (PSF) and the shadows of the pads supporting the HST primary mirror are related to the focus error. In the second method an analytical formula for the PSF with variable aberration coefficients is fitted to the data. Focus positions derived from the two methods show good agreement. The data show that a desorption of about 83 microns has taken place since Aug. 16, 1990. The desorption has clearly not leveled off as expected from the trend of the earlier data. Long term variations of the secondary mirror position of approximately 3-15 microns from the 'best' focus position have been observed. Variations of the order of 2-5 microns over an orbital period have also been noted. Focus changes resulting from secondary mirror movements greater than approximately 5 microns changes the point spread function significantly and makes deconvolution and quantitative measurements difficult.

Hasan, H.↗
NASA NTRS1994

Clean assembly and integration techniques for the Hubble Space Telescope High Fidelity Mechanical Simulator

A mechanical simulator of the Hubble Space Telescope (HST) Aft Shroud was built to perform verification testing of the Servicing Mission Scientific Instruments (SI's) and to provide a facility for astronaut training. All assembly, integration, and test activities occurred under the guidance of a contamination control plan, and all work was reviewed by a contamination engineer prior to implementation. An integrated approach was followed in which materials selection, manufacturing, assembly, subsystem integration, and end product use were considered and controlled to ensure that the use of the High Fidelity Mechanical Simulator (HFMS) as a verification tool would not contaminate mission critical hardware. Surfaces were cleaned throughout manufacturing, assembly, and integration, and reverification was performed following major activities. Direct surface sampling was the preferred method of verification, but access and material constraints led to the use of indirect methods as well. Although surface geometries and coatings often made contamination verification difficult, final contamination sampling and monitoring demonstrated the ability to maintain a class M5.5 environment with surface levels less than 400B inside the HFMS.

Hughes, David W.↗
NASA NTRS1994

Ultraviolet interstellar polarization observed with the Hubble Space Telescope

We have used the Faint Object Spectrograph of the Hubble Space Telescope to observe interstellar linear polarization from 1300 to 3300 A in two stars with well-studied interstellar polarization at visible wavelenths. The wavelength dependence of linear polarization declines smoothly with decreasing wavelength and is devoid of structure associated with the prominent 2175 A absorption bump in the interstellar extinction curve. The data for one star (HD 161056) are consistent with an extrapolation based on the Serkowski formula of a fit to the ground-based polariztion; the other star (HD 7252) shows excess (super-Serkowski) polarization relative to the extrapolation. Out of a total of 10 stars now studied by means of spectropolarimetry in the satellite ultraviolet, including eight obseved with the Wisconsin Ultraviolet Photopolarimeter, five (those of longest lambda (sub max)) show Serkowski behavior, and four others show super-Serkowski behavior; only one (HD 197770) shows evidence for polarization associated with the 2175 A bump. These results place important constraints on the nature of the bump feature.

Somerville, W. B.↗
NASA NTRS1994

High-resolution spectra of Jupiter's northern auroral ultraviolet emission with the Hubble Space Telescope

The first spectroscopic observations of planetary aurora with the Hubble Space Telescope (HST) are reported. These include spectral regions centered on the H2 Lyman and Werner bands of a region of Jupiter's northern aurora. The observations were made with the Goddard High Resolution Spectrograph (GHRS) using the Large Science Aperture as part of a campaign to study Jupiter at the time of the Ulysses flyby. The individual rotational-vibrational bands are resolved and the observed emissions are essentially all from H2. A rotational-vibrational temperature for H2 of 530 +/- 100 K is derived, a value significantly less than the 850-1100 K reported for Jovian H3(+) in the near-infrared but consistent with the temperature reported for fundamental-band quadrupole H2 emission. Comparison with the Faint Object Camera (FOC) images shows that the observed region was not one of the hot spots of the aurora. The results are interpreted in trms of electron impact excitation of H2 from secondary particles generated by primaries precipitating into Jupiter's atmsophere from the magnetosphere. In the region of the aurora observed, the homopause level is found to be significantly hotter but not necessarily higher than observed at nonauroral latitudes. The equatorial H2 dayglow spectrum was also detected; its intensity was 3.2 kR or 13% of the strength of the observed auroral emission.

Trafton, L. M.↗
NASA NTRS1994

High resolution optical and UV observations of the centers of NGC 1316 and NGC 3998 with the Hubble Space Telescope

B and UV high-resolution images obtained with Hubble Space Telescope (HST) Faint Object Camera reveal centrally increasing surface brightness and UV-bright point sources at the nuclei of the early-type galaxies NGC 1316 and NGC 3998. Model fitting of the surface brightness distribution dose not exclude a central flattening, which could however be the result of extinction and/or of improper evaluation of the point-source component. The present data, while not requiring the presence of central massive black holes in these two galaxies, make them possible candidates. Follow-up work is needed to study this point further. The presence of unresolved nuclei gives model-dependent support to this quest, if these sources are due to small Active Galactic Nuclei (AGN). These UV-bright sources could belong to the low-luminosity end of active galactic nuclear emission.

Fabbiano, G.↗
NASA NTRS1992

Making the Hubble Space Telescope servicing mission safe

This paper will detail how the Hubble Space Telescope (HST) system safety program is conducted. Numerous safety analyses are conducted through the various phases of design, test, and fabrication, and results are presented to NASA management for discussion during dedicated safety reviews. This paper will then address the system safety assessment and risk analysis methodologies used (i.e. hazard analysis, fault tree analysis, and failure modes and effects analysis), and how they are coupled with enginering and test analyses for a 'synergistic picture' of the system. Some preliminary safety analysis results, showing the relationship between hazard identification, control or abatement, and finally control verification, will be presented as examples of this safety process.

Bahr, N. J.↗
NASA NTRS1996

The Hubble Space Telescope servicing missions: Past, present, and future operational challenges

The Hubble Space Telescope (HST) is a complex spacecraft designed to conduct leading edge scientific observations over a planned fifteen year mission lifetime. It was designed for servicing by the Space Shuttle to upgrade systems, replace failed components, and boost into a higher orbit. There are many operational challenges that must be addressed in preparing for and executing a Servicing Mission (SM) which range from both technical to managerial issues. This paper will be exploring the operational challenges faced by the HST Operations and Ground System Project in supporting the First Servicing Mission (FSM) and future Servicing Missions. We give special emphasis to those areas that helped ensure mission success. These areas include training, testing, and contingency planning.

William R Ochs↗
NASA NTRS1997

An investigation into the milliarcsecond attitude control errors of Hubble Space Telescope

An analysis of the fine pointing errors of the Hubble Space Telescope (HST), in the range from 1 to 15 milliarcsecs, is reported on. The emphasis is on the study of the performance characteristics of the pointing control system, fine guidance sensors and the optical telescope assembly, which produce relative attitude and astrometric measurement errors. Since the first servicing mission in December 1993, the HST relative short term position stability is of the order of 3 milliarcsecs RMS when averaged over 1 min intervals. At this level of accuracy, longer term systematic attitude errors in this range can have a noticeable impact on the telescope's observations. The various error sources are described, including: internal temperature effects; spacecraft structure temperature effects; calibration procedures, and computational inaccuracies.

Bradley, A. J.↗
NASA NTRS2010

Early Scientific Results and Future Prospects for the Rejuvenated Hubble Space Telescope

Following the extraordinarily successful Servicing Mission 4 (SM4) of Hubble Space Telescope (HST) in May of 2009, the Observatory is now fully equipped with a broad array of powerful science instruments that put it at the pinnacle of its scientific power. Relevant to the subject matter of the Beyond 2010 Conference, HST will be well-placed over the next five-plus years to advance our knowledge of the formation of high-redshift galaxies and their growth with cosmic time; the emergence of structure in the early universe via Dark Matter-driven gravitational instability; and the universe's expansion history and any resulting implications for the temporal character of Dark Energy. These are fitting projects for the iconic facility now celebrating its 20th anniversary in orbit.

Niedner, Malcolm B.↗
NASA NTRS2000

Hubble Space Telescope Program on STS-95 Supported by Space Acceleration Measurement System for Free Flyers

John Glenn's historic return to space was a primary focus of the STS 95 space shuttle mission; however, the 83 science payloads aboard were the focus of the flight activities. One of the payloads, the Hubble Space Telescope Orbital System Test (HOST), was flown in the cargo bay by the NASA Goddard Space Flight Center. It served as a space flight test of upgrade components for the telescope before they are installed in the shuttle for the next Hubble Space Telescope servicing mission. One of the upgrade components is a cryogenic cooling system for the Near Infrared Camera and Multi-Object Spectrometer (NICMOS). The cooling is required for low noise in the receiver's sensitive electronic instrumentation. Originally, a passive system using dry ice cooled NICMOS, but the ice leaked away and must be replaced. The active cryogenic cooler can provide the cold temperatures required for the NICMOS, but there was a concern that it would create vibrations that would affect the fine pointing accuracy of the Hubble platform.

Kacpura, Thomas J.↗
NASA NTRS2019

Lifetimes and Occurrence Rates of Dark Vortices on Neptune from 25 Years of Hubble Space Telescope Images

We scoured the full set of blue-wavelength Hubble Space Telescope images of Neptune, finding one additional dark spot in new Hubble data beyond those discovered in 1989, 1994, 1996, and 2015. We report the complete disappearance of the SDS-2015 dark spot, using new Hubble data taken on 2018 September 9–10, as part of the Outer Planet Atmospheres Legacy (OPAL) program. Overall, dark spots in the full Hubble data set have lifetimes of at least one to two years, and no more than six years. We modeled a set of dark spots randomly distributed in time over the latitude range on Neptune that is visible from Earth, finding that the cadence of archival Hubble images would have detected about 70% of these spots if their lifetimes are only one year, or about 85%–95% of simulated spots with lifetimes of two or more years. Based on the Hubble data set, we conclude that dark spots have average occurrence rates of one dark spot every four to six years. Many numerical models to date have simulated much shorter vortex lifetimes, so our findings provide constraints that may lead to improved understanding of Neptune’s wind field, stratification, and humidity.

Hsu, Andrew I.↗
NASA NTRS1987

Hubble space telescope pointing control system simulation

A time domain simulation of the Hubble Space Telescope (HST) pointing control system is described. The simulation was developed to aid in the evaluation of moving target pointing algorithms and to serve as an analysis tool. The HST pointing control system is briefly described, and the time domain simulation is discussed. A typical simulation result for moving target tracking is presented.

Strohbehn, K.↗
NASA NTRS1987

Expert systems tools for Hubble Space Telescope observation scheduling

The utility of expert systems techniques for the Hubble Space Telescope (HST) planning and scheduling is discussed and a plan for development of expert system tools which will augment the existing ground system is described. Additional capabilities provided by these tools will include graphics-oriented plan evaluation, long-range analysis of the observation pool, analysis of optimal scheduling time intervals, constructing sequences of spacecraft activities which minimize operational overhead, and optimization of linkages between observations. Initial prototyping of a scheduler used the Automated Reasoning Tool running on a LISP workstation.

Miller, Glenn↗
NASA NTRS1991

Diagnosing the optical state of the Hubble Space Telescope

Problems involved in the diagnosing the optical status of the Hubble Space Telescope (HST) are reviewed with emphasis on the task of determining the actual hyperboloidal shape of the primary mirror. Based on the results of several studies, a revised value of K = -1.0139 (an average of the best estimates derived from the analysis of the reflective null corrector and no-orbit star images) was recommended as the best value for the design of the second-generation Wide Field and Planetary Camera so as to restore the imaging ability of the HST to its original specification.

Vaughan, Arthur H.↗
NASA NTRS1991

Hubble Space Telescope pointing control system: Designed for performance and mission operations

The Hubble Space Telescope was designed to be an orbiting astronomical observatory which could be operated in the same manner as ground based observatories. The design drivers for the pointing control system's hardware and software were the requirements of an absolute pointing accuracy of 4.8E-8 radians and pointing stability (jitter) of 3.4E-8 radians. Of comparable importance was the objective of providing a flexible command methodology and structure to enable seven day operational planning employing stored program command and real time command capability. The pointing control system hardware, software, safemode control schemes, ground system monitoring capability, and in-orbit results are reviewed.

Bradley, A.↗