Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMPACT ACCELERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

SU-E-T-487: Impact of Geometric Uncertainties in Accelerated Partial Breast Irradiation Using the Strut-Adjusted Volume Implant (SAVI)

Purpose: Single-entry multi-catheter devices have been developed for accelerated partial breast irradiation (APBI). Rotational and translational uncertainties are usually mitigated by quality assurance, however its actual dosimetric impact has not been addressed, which is presented here for SAVI applicator. Methods: Under Institutional Review Board exemption status, we retrospectively analyzed 48 APBI treatment plans using SAVI applicator. For quick calculation of dose-volume histogram (DVH) considering geometric uncertainties, the coordinate of each voxel of critical organs after rotation or translation along the central catheter was calculated using an in-house software instead of rotating or translating the entire dose distribution. Results: For most cases, the skin doses increased with rotation to both directions. At 10 degree of rotation, the increase of Dmax (percent prescribed dose) at 50% (median), 75%, 90%, and 100% (maximum) percentile were 0.3%, 1.7%, 5.6% and 25.0%, respectively. The increase of chest wall Dmax at 50%, 75%, 90%, and 100% percentile were 0.1%, 1.0%, 10.3% and 38.8%, respectively. The increase of skin Dmax of the patients with the distance between skin surface and lumpectomy cavity surface ≤16 mm was significantly larger than those with the distance >16 mm. Similarly, patients with the distance between lung and lumpectomy cavity surface ≤20 mm showed higher sensitivity of chest wall Dmax against rotation than patients with the distance <20 mm. Translation of the applicator showed larger impact on the skin dose than rotation, although the effects on chest wall was less than 2% even at 10 mm displacement. At 5 mm of translation, increase of skin Dmax at 50%, 75%, 90%, and 100% percentile were 2.3%, 8.0%, 15.3% and 77.7%, respectively. Conclusion: The impacts of the geometric uncertainties (rotation and translation) of SAVI applicator were investigated. The skin-lumpectomy cavity and lung-lumpectomy cavity distances showed significant relationship with skin and chest wall doses, respectively.

60 APPLIED LIFE SCIENCES↗

The research progress of some key problems about the protection of industrial electron irradiation accelerator - Paper 9

In the last decades, electronic irradiation accelerator has made great progress and been widely used in fields. Because of its distinguishing feature of reliability and safety, electronic irradiation accelerator has attracted more attention of the investors, and created a huge economic value and social benefits. It will become the mainstream equipment of irradiation processing industry in future. So the further study of the shielding design around irradiation accelerator is of great significance. Different designs of ventilation duct will greatly influence dose rate of the exit. Because of the high dose rate under the target, it is suitable to use multi-tortuous duct when duct locating under target. It will reduce the dose rate about 3 orders of magnitude at the exit that add one backscattering interface in duct. Choose reasonable diameter and angle of embedded duct so that photons scatter as much as possible. We can use multiple small diameter ducts to replace large diameter duct. The system of Mini-DDL, Gamma detector and PC give a better reflection on the running statue of accelerator, its perfect usability can produce intuitive images for analyzed, it is important and helpful for workers and researchers to know about the radiation level of machine and environment. The measured results along the maze show that the maze must be long enough in order to achieve the desired shielding thickness. In future, we will combine the different kinds and motor patterns of body models, Monte Carlo programs, real time monitoring system with theoretical calculations to explore how the radiation field around accelerator has impact on human organs, get the dose distribution of body models so that improve the radiation protection to electron accelerator. (authors)

43 PARTICLE ACCELERATORS↗

Accelerated Partial Breast Irradiation: 5-Year Results of the German-Austrian Multicenter Phase II Trial Using Interstitial Multicatheter Brachytherapy Alone After Breast-Conserving Surgery

Purpose: To evaluate the impact of accelerated partial breast irradiation on local control, side effects, and cosmesis using multicatheter interstitial brachytherapy as the sole method for the adjuvant local treatment of patients with low-risk breast cancer. Methods and Materials: 274 patients with low-risk breast cancer were treated on protocol. Patients were eligible for the study if the tumor size was < 3 cm, resection margins were clear by at least 2 mm, no lymph node metastases existed, age was >35 years, hormone receptors were positive, and histologic grades were 1 or 2. Of the 274 patients, 175 (64%) received pulse-dose-rate brachytherapy (D{sub ref} = 50 Gy). and 99 (36%) received high-dose-rate brachytherapy (D{sub ref} = 32.0 Gy). Results: Median follow-up was 63 months (range, 9-103). Only 8 of 274 (2.9%) patients developed an ipsilateral in-breast tumor recurrence at the time of analysis. The 5-year actuarial local recurrence-free survival probability was 98%. The 5- year overall and disease-free survival probabilities of all patients were 97% and 96%, respectively. Contralateral in-breast malignancies were detected in 2 of 274 (0.7%) patients, and distant metastases occurred in 6 of 274 (2.2%). Late side effects {>=}Grade 3 (i.e., breast tissue fibrosis and telangiectasia) occurred in 1 patient (0.4%, 95%CI:0.0-2.0%) and 6 patients (2.2%, 95%CI:0.8-4.7%), respectively. Cosmetic results were good to excellent in 245 of 274 patients (90%). Conclusions: The long-term results of this prospective Phase II trial confirm that the efficacy of accelerated partial breast irradiation using multicatheter brachytherapy is comparable with that of whole breast irradiation and that late side effects are negligible.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Technique for Obtaining Hypervelocity Impact Data by using the Relative Velocities of Two Projectiles

A facility has been developed and put into operation to determine the feasibility of obtaining hypervelocity impact data by using the relative velocities of two projectiles. The facility utilizes the technique of firing a target toward an oncoming high-velocity projectile so that the impact velocity is equal to the sum of the projectile velocity and the target velocity. A 37-millimeter powder gun is utilized to accelerate the targets, and a specially designed 22-caliber light-gas gun accelerates the impacting projectiles. The light-gas gun is operated by detonating an explosive charge which permits it to be synchronized with the firing of the 37-millimeter gun. Impact velocities as great as 21,850 ft/sec have been obtained during development of the facility. After the oncoming projectiles impact the targets fired from the 37-millimeter gun, these targets are recovered by allowing them to impact into Celotex and soft wooden blocks. The craters formed in the targets then can be observed and measured. The results of several preliminary firings of the facility are included in this report.

Kinard, William H.↗

Role of Accelerated Burnup Irradiation Testing in Support of Accelerated Fuel Qualification

Accelerated fuel qualification has gained attention as a means to reduce the time needed to realize new nuclear fuel concepts and expand the operating windows of existing fuel forms. A key component of this approach is accelerated burnup irradiation testing. Although the concept of accelerated burnup has been familiar to the community for many decades, the specifics about how the increasing fission rate may be used as a qualification tool have not yet been elucidated. The present work provides a vision of how accelerated fission rate testing can enable accelerated fuel qualification. Technology readiness levels (TRLs) are reintroduced to demarcate the stages of traditional fuel qualification, and accelerated fuel qualification is presented in this context. The critical steps needed to achieve each TRL are reframed within the context of modern nuclear materials research and development, as revolutionary fuel concepts are more common than previous eras. The practical impacts of accelerated fuel qualification approaches as applied to contemporary fuel qualification efforts are illustrated. Examples are given to illustrate how accelerated burnup irradiations are being used currently and could be applied in the future to support qualification and licensure. Finally, outstanding challenges in the application of accelerated burnup methods to nuclear fuel qualification are summarized, with priority placed on understanding how fission rate impacts diffusion, microstructure evolution, and other critical mechanisms that dictate fuel performance.

Accelerated fuel qualification↗

Integrated High‐Throughput and Machine Learning Methods to Accelerate Discovery of Molten Salt Corrosion‐Resistant Alloys

Insufficient availability of molten salt corrosion-resistant alloys severely limits the fruition of a variety of promising molten salt technologies that could otherwise have significant societal impacts. To accelerate alloy development for molten salt applications and develop fundamental understanding of corrosion in these environments, here an integrated approach is presented using a set of high-throughput (HTP) alloy synthesis, corrosion testing, and modeling coupled with automated characterization and machine learning. By using this approach, a broad range of Cr-Fe-Mn-Ni alloys are evaluated for their corrosion resistances in molten salt simultaneously demonstrating that corrosion-resistant alloy development can be accelerated by 2 to 3 orders of magnitude. Based on the obtained results, a sacrificial protection mechanism is unveiled in the corrosion of Cr-Fe-Mn-Ni alloys in molten salts which can be applied to protect the less unstable elements in the alloy from being depleted, and provided new insights on the design of high-temperature molten salt corrosion-resistant alloys.

36 MATERIALS SCIENCE↗

Accelerating Scientific Computing in the Post-Moore’s Era

Novel uses of graphical processing units for accelerated computation revolutionized the field of high-performance scientific computing by providing specialized workflows tailored to algorithmic requirements. As the era of Moore’s law draws to a close, many new non–von Neumann processors are emerging as potential computational accelerators, including those based on the principles of neuromorphic computing, tensor algebra, and quantum information. While development of these new processors is continuing to mature, the potential impact on accelerated computing is anticipated to be profound. We discuss how different processing models can advance computing in key scientific paradigms: machine learning and constraint satisfaction. Significantly, each of these new processor types utilizes a fundamentally different model of computation, and this raises questions about how to best use such processors in the design and implementation of applications. While many processors are being developed with a specific domain target, the ubiquity of spin-glass models and neural networks provides an avenue for multi-functional applications. Furthermore, this also hints at the infrastructure needed to integrate next-generation processing units into future high-performance computing systems.

97 MATHEMATICS AND COMPUTING↗

Melting and its relationship to impact crater morphology

Shock-melting features occur on planets at scales that range from micrometers to megameters. It is the objective of this study to determine the extent of thickness, volume geometry of the melt, and relationship with crater morphology. The variation in impact crater morphology on planets is influenced by a broad range of parameters: e.g., planetary density, thermal state, strength, impact velocity, gravitational acceleration. We modeled the normal impact of spherical projectiles on a semi-infinite planet over a broad range of conditions using numerical techniques.

Okeefe, John D.↗

LANSCE Facility Longevity Assessment

This LANSCE Facility Longevity Assessment examined 34 total systems critical to the operation of the LANSCE accelerator complex. These systems are primarily owned, operated, and maintained by AOT Division. Based on the criteria used in this assessment, there are 12 AOT Division systems that are potential high risk as related to longterm LANSCE operations. These systems may also impact the success of LAMP. Also summarized in this report are the facility activities planned over the next decade. These include general facility maintenance and infrastructure upgrades, as well as planned electrical system upgrades. The LANSCE Facility Operations (LFO) Division is responsible for this activity scope and budget planning. Most of the planned activities are general in nature and should have little impact on accelerator operations or LAMP activities as currently envisioned. However, close coordination with between AOT, LFO, and LAMP would be prudent. A next step should be to develop an actionable plan to address the high-risk systems. Potential criteria for developing such a plan could include: (1) Evaluating the global impact of the system (operations, program, safety, etc.), (2) Ranking by impact (ranked now by risk), (3) Estimating cost to implement the corrective actions (Is there already a plan or not?), and (4) Estimating the time required for corrective actions. An alternative could include integration of the assessment data into both the Asset Management System and the Maintenance Analytics Risk Register.

43 PARTICLE ACCELERATORS↗

Effect of a Load-Alleviating Structure on the Landing Behavior of a Reentry-Capsule Model

Model tests have been made to determine the landing-impact characteristics of a parachute-supported reentry capsule that had a compliable metal structure as a load-alleviating device. A 1/6-scale dynamic model having compliable aluminum-alloy legs designed to give a low onset rate of acceleration on impact was tested at flight-path angles of 90 degrees ( vertical ) and 35 deg, at a vertical velocity of 30 ft/sec ( full scale), and at contact attitudes of 0 deg and +/-30 deg. Landings were made on concrete, sand, and water. The maximum acceleration encountered was approximately 35g and the maximum onset rate was 2,000 g/sec. on concrete a t the 55 deg flight-path, f30 contact-attitude conditions; therefore, load-alleviating devices on the canister end of the model would be required. To evaluate the scaling characteristics of compliable metal structures, models were tested with 1/4.1-scale and full-scale aluminum-alloy legs. The maximum vertical accelerations and strokes obtained from tests of the 1/4.1-scale and full-scale legs were the same within the recording accuracy of the equipment. Acceleration time histories for the 90 degree flight-path, 0 deg contact-attitude condition were computed and are in good agreement with the experimental results.

Hoffman, Edward L.↗

Harnessing Relativistic Laser Plasmas to Generate Intense Ion Beams: A Plasma Science Frontier White Paper

Optical lasers with high intensity (> 10 19 W/cm 2 ), high power (> 100 TW) and high energy (> 50 J) are enabling research that is expanding the frontiers of physics. Some of the research opportunities and importance are described in several reports. Here we highlight a prominent one: harnessing relativistic laser plasmas to generate intense ion beams, much more intense than it is possible with conventional particle-acceleration technology. This topic is important in two ways. On the one hand, it represents exceedingly exciting science in plasma physics and extreme electrodynamics (i.e., “high-field” physics). On the other hand, it enables advanced technology for advancing other fields of science, for societal applications (e.g., fast ignition8) and for national defense. There are tremendous opportunities for continued progress in existing laser facilities in the US (with laser intensities up to ~ 10 21 W/cm 2 , such as the Trident Laser Facility) provided modest funding support and reorientation of these lasers as national user facilities. Longer term, there are also great scientific opportunities for the US by extending our capabilities to intensities of ~ 10 22 W/cm 2 and beyond with shaped laser pulses of intermediate duration (~ 100 fs), to complement high intensity, shorter pulse length lasers planned worldwide. Such a complementary US facility would in fact excel in the ion-beam generation mission proposed here. At ~ 10 22 W/cm 2 and beyond, besides meeting the requirements for important societal applications of intense ion beams, novel high-field physics becomes important and amenable to study. That includes e.g., radiation self-force for electrons, and direct coupling of the laser to the ions (not just to electrons and then indirectly to the ions). These new physics in turn may open new technological opportunities, such as x-ray and gamma-ray-beam sources and new ion-acceleration mechanisms. It is hard to overstate the impact of particle accelerators starting in the last century to the present. Accelerators have had profound impact in society, both as a key enabling experimental tool for the modern scientific edifice, as well as for societal applications such as cancer therapy. Conventional accelerator technology is bumping against two main limitations. One is particle energy (at a reasonable size and cost) rooted in the ~ 25 MeV/m gradient limit from electrical breakdown of conventional accelerator structures. The second is beam intensity, limited by current and space-charge stability of conventional (non-neutral) particle beams. The former issue is being addressed in ingenious ways by “dielectric accelerators” which use high-power, low-energy lasers to set up transient-high fields in dielectric microstructures. These devices promise to advance the state of the art in acceleration gradients, but of course cannot address the intensity limitations. Ultimately, the highest performance is going to require a plasma as the acceleration medium. Plasmas can support the highest accelerating potential gradients and the highest currents. Moreover, by delivering neutralized beams (ions co-moving with unbound electrons), the usual current and space-charge limits can be circumvented. Realizing the highest ion energies and intensities requires a high-power density source to drive the system. Intense, high-power, high-energy lasers represent an ideal drive source, provided the physics can be understood and controlled, i.e., a challenge proposed here. To meet that challenge, the science community can build on the significant progress over the last decade, experimentally, computationally and theoretically.

43 PARTICLE ACCELERATORS↗

SU-E-T-136: Assessment of Seasonal Linear Accelerator Output Variations and Associated Impacts

Purpose: Application of process control theory in quality assurance programs promises to allow earlier identification of problems and potentially better quality in delivery than traditional paradigms based primarily on tolerances and action levels. The purpose of this project was to characterize underlying seasonal variations in linear accelerator output that can be used to improve performance or trigger preemptive maintenance. Methods: Review of runtime plots of daily (6 MV) output data acquired using in house ion chamber based devices over three years and for fifteen linear accelerators of varying make and model were evaluated. Shifts in output due to known interventions with the machines were subtracted from the data to model an uncorrected scenario for each linear accelerator. Observable linear trends were also removed from the data prior to evaluation of periodic variations. Results: Runtime plots of output revealed sinusoidal, seasonal variations that were consistent across all units, irrespective of manufacturer, model or age of machine. The average amplitude of the variation was on the order of 1%. Peak and minimum variations were found to correspond to early April and September, respectively. Approximately 48% of output adjustments made over the period examined were potentially avoidable if baseline levels had corresponded to the mean output, rather than to points near a peak or valley. Linear trends were observed for three of the fifteen units, with annual increases in output ranging from 2–3%. Conclusion: Characterization of cyclical seasonal trends allows for better separation of potentially innate accelerator behaviour from other behaviours (e.g. linear trends) that may be better described as true out of control states (i.e. non-stochastic deviations from otherwise expected behavior) and could indicate service requirements. Results also pointed to an optimal setpoint for accelerators such that output of machines is maintained within set tolerances and interventions are required less frequently.

07 ISOTOPE AND RADIATION SOURCES↗

Number of collisions in the Glauber model and beyond

The so-called number of hadron-nucleus collisions n{sub coll}(b) at impact parameter b and its integral value N{sub coll}, which are used to normalize the measured fractional cross section of a hard process, are calculated within the Glauber-Gribov theory, including the effects of nucleon short-range correlations. The Gribov inelastic shadowing corrections are summed to all orders by employing the dipole representation. Numerical calculations are performed at the energies of the BNL Relativistic Heavy Ion Collider (RHIC) and CERN Large Hadron Collider (LHC). We found that whereas the Gribov corrections generally increase the value of N{sub coll}, the inclusion of nucleon correlations, acting in the opposite directions, decreases it by a comparable amount. The interplay of the two effects varies with the value of the impact parameter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Load-Alleviating Structure on the Landing Behavior of a Reentry-Capsule Model

Model tests have been made to determine the landing-impact characteristics of a parachute-supported reentry capsule that had a compliable metal structure as a load-alleviating device. A 1/6-scale dynamic model having compliable aluminum-alloy legs designed to give a low onset rate of acceleration on impact was tested at flight-path angles of 90 degrees (vertical) and 35 degrees, at a vertical velocity of 30 ft/sec (full scale), and at contact attitudes of 0 degrees and +/-30 degrees. Landings were made on concrete, sand, and water.

[Division] Structures↗

The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO{sub 2}

This study investigated the effect of flowing velocity and impact angle on the fluid-accelerated corrosion (FAC) of X65 pipeline steel in a wet CO{sub 2}-containing environment by corrosion morphology analysis, electrochemical measurement, and hydromechanical numerical analysis. It has been found that the corrosion behavior was controlled by the ion diffusion rate and shear stress due to the flowing gas. With an increase in the flowing velocity, the pitting corrosion initially decreased and then increased when the flowing velocity exceeded 14 m/s; this increase is caused by the augmentation of shear stress. When the impact angle decreased, the position of serious corrosion gradually moved outwards.

36 MATERIALS SCIENCE↗

Effect of an impact-generated gas cloud on the acceleration of solid ejecta

A hypothesis that vaporization of a large amount of volatiles such as H2O and CO2 in the Martian surface by the impact of a large object could have accelerated solid ejecta to earth is examined. A hydrodynamic model is used to approximate a hemispherical gas cloud expanding into an atmosphere and entraining solid ejecta. Account is taken of the target material, the impactor materials, mass vaporized, impact velocity, drag coefficient, and crater sizes. A Martian crater larger than 30 km diam is found to be a necessary remnant of any impact that could have produced the shergottites, nakhlites and Chassigny meteorites which have been found on earth and possess similarities to analyzed Martian rocks.

Vickery, Ann↗