Search NASA⌕ Search

SEARCH · Search NASA

Results for “IN VITRO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Understanding the adsorption and potential tear film stability properties of recombinant human lubricin and bovine submaxillary mucins in an in vitro tear film model

The wetting and adsorption properties for two glycoproteins, recombinant human lubricin and bovine submaxillary mucins (BSM) were evaluated on hydrophilic and hydrophobic glass dome surfaces in a simplified in vitro tear film model. Herein, we show that both recombinant human lubricin (rh-lubricin) and BSM solutions render surfaces hydrophilic and when the fluid films reach 500 nm or less, the fluids resist evaporation-driven breakup through a volumetric flux across the surface, which we believe is due to evaporation-driven solutocapillary flows. rh-Lubricin was able to maintain a wet film without spontaneous breakup for longer periods of time than BSM at lower concentrations, which we attribute to differences in adsorption properties, measured by QCM-D, that result from surface charge and structural differences (confirmed by zeta potential, DLS, and SAXS measurements).

60 APPLIED LIFE SCIENCES↗

(Phospho)Proteomic dataset of ischemia- and ultrasound- stimulated mouse cardiac endothelial cells in vitro

Cardiac endothelial cells respond to both ischemia and therapeutic ultrasound; the proteomic changes underlying these responses are unknown. This data article provides raw and processed data resulting from our global, unbiased phosphoproteomics investigation conducted on primary mouse cardiac endothelial cells exposed to ischemia (2-hour oxygen glucose deprivation) and ultrasound (250 kHz, 1.2 MPa) in vitro [1]. Proteins were extracted from cell lysates and enriched phosphopeptides were analyzed with a high mass accuracy liquid chromatrography (LC) - tandem mass spectrometry (MS/MS) proteomic platform, yielding multiple alterations in both total protein levels and phosphorylation events in response to ischemic injury and ultrasound. This dataset can be used as a reference for future studies on the cardiac endothelial response to ischemia and the mechanistic underpinnings of the cellular response to ultrasound, with the potential to yield clinically relevant therapeutic targets.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of polyphenols on the rheology, microstructure and in vitro digestion of pea protein gels at various pH

Polyphenols exist widely in plants and interact with plant proteins distinctly depending on the environmental pH. This could potentially affect the gelling property of plant proteins and their digestion. In the present study, pea protein suspensions containing 0 %, 0.5 % and 1 % green tea polyphenols (GTP) were heated to form gels at pH5, pH7, and pH8.5. A strain amplitude sweep showed that the storage modulus (G’) and critical strain of pea protein gels decreased with increased GTP concentration at all examined pH. Gelation dynamic showed gelling of pea protein-GTP was delayed at pH7 and pH8.5 compared to the control. Differential scanning calorimetry showed that pea proteins became less heat resistant in the presence of GTP at pH5 and pH7, but not at pH8.5. Ultra-small and small-angle X-ray scattering showed that the radius of gyration of small- and medium-sized aggregates in pea protein gels was increased ~10–16 % and 22–30 % at pH7 and pH8.5, respectively when 1 % GTP was present. Finally, under such pH conditions, the proportion of structure with a radius of ~10–200 nm was increased in pea protein-GTP gels based on the volume size distribution. In vitro digestion found the soluble protein content of digesta of pea protein-GTP gels had a 5–8.5 % decrement with the presence of larger peptides when compared to pea protein gels.

59 BASIC BIOLOGICAL SCIENCES↗

Graphene oxide exposure alters gut microbial community composition and metabolism in an in vitro human model

Graphene oxide (GO) nanomaterials have unique physicochemical properties that make them highly promising for biomedical, environmental, and agricultural applications. Despite the increasing interest and the use of GO, assessments of its nanotoxicity have largely not interrogated its potential impact on the gut microbiome. This study addresses an important knowledge gap by investigating the impact of GO exposure- both at low (25 ppm) and high (250ppm) doses and fed (nutrient rich) and fasted (nutrient deplete) conditions- on the gut microbial community structure and function, using an in vitro human colon bioreactor model. 16S rRNA amplicon sequencing revealed that GO exposure resulted in a restructuring of community composition. 25 ppm GO induced a marked decrease in the Bacteroidota phylum and increased the ratio of Firmicutes to Bacteroidota (F/B). Untargeted metabolomics on the supernatants indicated that 25 ppm GO impaired microbial utilization and metabolism of substrates (amino acids, carbohydrate metabolites) and reduced production of beneficial microbial metabolites such as 5-hydroxyindole-3-acetic acid and GABA. Exposure to 250 ppm GO resulted in community composition and metabolome profiles that were very similar to the controls that lacked both GO and digestive enzymes, suggesting that high concentrations of GO may interact with digestive enzymes to form protein coronas, causing their depletion in the gut environment. Differential abundance analyses revealed that 3 genera from the phylum Bacteroidota (Bacteroides, Dysgonomonas, and Parabacteroides) were more abundant after 250 ppm GO exposure, irrespective of feed state. Integrative correlation network analysis indicated that the phylum Bacteroidota showed strong positive correlations to multiple microbial metabolites including GABA and 3-indoleacetic acid, are much larger number of correlations compared to other phyla. These results show that GO exposure has a significant impact on gut microbial community composition and metabolism and different mechanisms are at play for low and high GO concentrations.

59 BASIC BIOLOGICAL SCIENCES↗

A split luciferase system for studying coronavirus Mpro dimerization in vitro and in living cells

The main protease enzyme (Mpro) of coronaviruses cleaves the viral polyprotein into functional units essential for virus replication. Prior work has demonstrated that Mpro functions as a homodimer. However, studies on the mechanism of dimerization have been challenging because the purified protease is mostly dimeric, dimerization-defective mutants lack proteolytic activity, and robust cell-based assays have yet to be reported. To enable work on Mpro dimerization, we have developed a quantitative luciferase-based SARS-CoV-2 (SARS2) Mpro biosensor that accurately reports protein dimerization in living cells and, upon purification, also in vitro. Co-transfection of cells with a construct expressing Mpro fused to the 18 kDa LargeBiT of luciferase (LgBiT) and a second construct with Mpro fused to the 1 kDa SmallBiT of luciferase (SmBiT) results in a reconstitution of luciferase activity in a dose-dependent manner that requires conserved residues within the dimerization interface. Proteolytic activity is dispensable for dimerization and, uniquely, a C145A catalytically inactive mutant exhibits enhanced dimerization signal likely due to lower cytotoxicity. Mpro enzymes from multiple different coronaviruses also dimerize in this system, indicating mechanistic conservation. Interestingly, this dimerization biosensor also provides a quantitative read-out of inhibitor-facilitated dimerization. Covalent SARS2 Mpro inhibitors such as nirmatrelvir cause a 3- to 5-fold increase in luciferase activity. Together with corroborating structural, biophysical, and molecular dynamics experiments, our studies support a model in which covalent Mpro inhibitors such as nirmatrelvir simultaneously block catalytic activity and induce allosteric stabilization of the dimeric complex.

SARS-CoV-2 main protease (Mpro/3CLpro)↗

Resolving protein-mineral interfacial interactions during in vitro mineralization by atom probe tomography

Organic macromolecules exert remarkable control over the nucleation and growth of inorganic crystallites during (bio)mineralization, as exemplified during enamel formation where the protein amelogenin regulates the formation of hydroxyapatite (HAP). However, it is poorly understood how fundamental processes at the organic-inorganic interface, such as protein adsorption and/or incorporation into minerals, regulates nucleation and crystal growth due to technical challenges in observing and characterizing mineral-bound organics at high-resolution. Here, atom probe tomography techniques were developed and applied to characterize amelogenin-mineralized HAP particles in vitro, revealing distinct organic-inorganic interfacial structures and processes at the nanoscale. Specifically, visualization of amelogenin across the mineralized particulate demonstrates protein can become entrapped during HAP crystal aggregation and fusion. Identification of protein signatures and structural interpretations were further supported by standards analyses, i.e., defined HAP surfaces with and without amelogenin adsorbed. These findings represent a significant advance in the characterization of interfacial structures and, more so, interpretation of fundamental organic-inorganic processes and mechanisms influencing crystal growth. Ultimately, this approach can be broadly applied to inform how potentially unique and diverse organic-inorganic interactions at different stages regulates the growth and evolution of various biominerals.

36 MATERIALS SCIENCE↗

An expert-driven literature review of “negative” chemicals for developmental neurotoxicity (DNT) in vitro assay evaluation

To date, approximately 200 chemicals have been tested in US Environmental Protection Agency (EPA) or Organization for Economic Co-operation and Development (OECD) developmental neurotoxicity (DNT) guideline studies, leaving thousands of chemicals without traditional animal information on DNT hazard potential. To address this data gap, a battery of in vitro DNT new approach methodologies (NAMs) has been proposed. Evaluation of the performance of this battery will increase the confidence in its use to determine DNT chemical hazards. One approach to evaluate DNT NAM performance is to use a set of chemicals to evaluate sensitivity and specificity. Since a list of chemicals with potential evidence of in vivo DNT has been established, this study aims to develop a curated list of “negative” chemicals for inclusion in a “DNT NAM evaluation set”. A workflow, including a literature search followed by an expert-driven literature review, was used to systematically screen 39 chemicals for lack of DNT effect. Expert panel members evaluated the scientific robustness of relevant studies to inform chemical categorizations. Following review, the panel discussed each chemical and made categorical determinations of “Favorable”, “Not Favorable”, or “Indeterminate” reflecting acceptance, lack of suitability, or uncertainty given specific limitations and considerations, respectively. Further, the panel determined that 10, 22, and 7 chemicals met the criteria for “Favorable”, “Not Favorable”, and “Indeterminate”, for use as negatives in a DNT NAM evaluation set. Ultimately, this approach not only supports DNT NAM performance evaluation but also highlights challenges in identifying large numbers of negative DNT chemicals.

59 BASIC BIOLOGICAL SCIENCES↗

In vitro prototyping of limonene biosynthesis using cell-free protein synthesis

Metabolic engineering of microorganisms to produce sustainable chemicals has emerged as an important part of the global bioeconomy. Unfortunately, efforts to design and engineer microbial cell factories are challenging because design-build-test cycles, iterations of re-engineering organisms to test and optimize new sets of enzymes, are slow. To alleviate this challenge, we demonstrate a cell-free approach termed in vitro Prototyping and Rapid Optimization of Biosynthetic Enzymes (or iPROBE). In iPROBE, a large number of pathway combinations can be rapidly built and optimized. The key idea is to use cell-free protein synthesis (CFPS) to manufacture pathway enzymes in separate reactions that are then mixed to modularly assemble multiple, distinct biosynthetic pathways. As a model, we apply our approach to the 9-step heterologous enzyme pathway to limonene in extracts from Escherichia coli. In iterative cycles of design, we studied the impact of 54 enzyme homologs, multiple enzyme levels, and cofactor concentrations on pathway performance. In total, we screened over 150 unique sets of enzymes in 580 unique pathway conditions to increase limonene production in 24 h from 0.2 to 4.5 mM (23–610 mg/L). Finally, to demonstrate the modularity of this pathway, we also synthesized the biofuel precursors pinene and bisabolene. Finally, we anticipate that iPROBE will accelerate design-build-test cycles for metabolic engineering, enabling data-driven multiplexed cell-free methods for testing large combinations of biosynthetic enzymes to inform cellular design.

59 BASIC BIOLOGICAL SCIENCES↗

Radiolabeling and in vitro studies of scandium-44 with HOPO chelator for PET imaging

44 Sc has been attracting interest as a clinically viable PET (positron emission tomography) imaging radionuclide due to its high positron branching ratio, 3.97 hour half-life, ideal positron energy of 632 keV and ability to be produced from a generator as well as from a cyclotron. Scandium is also of interest since the coordination is similar to the lanthanides and Ga 3+ that have demonstrated labeling methods. Further, 47 Sc (a potential therapeutic radionuclide) can serve as a matched isotope pair for theranostic applications. While the labeling studies of 44 Sc with DOTA and DOTA derivatives are quite extensive, there is little data on complexation of scandium with the chelator 3,4,3-(LI-1,2-HOPO). This ligand has been used successfully to radiolabel 89 Zr where it was shown to have high stability in vivo. Additionally, preliminary studies with 86 Y, and non-radioactive scandium show promising complexation constants similar to those found with DOTA derivatives. One major advantage of using HOPO is that radiolabeling can be achieved at room temperature while DOTA requires elevated temperatures, that may be detrimental when radiolabeling biomolecules. Radiolabeling of generator produced 44 Sc versus cyclotron produced 44 Sc is also under investigation as there are currently several different post-elution purification methods of generator 44 Sc, and the potential radiolabeling complications of these eluents has not yet been studied. This work focuses on radiolabeling HOPO with generator produced 44 Sc and the in vitro and radioanalytical evaluation of the resulting complexes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

In Silico Guidance for In Vitro Androgen and Glucocorticoid Receptor ToxCast Assays

Molecular initiating events (MIEs) are key events in adverse outcome pathways (AOPs) that link molecular chemistry to target biology. As they are based in chemistry, these interactions are excellent targets for computational chemistry approaches to in silico modelling. In this work, we aim to link ligand chemical structure to MIEs for androgen receptor (AR) and glucocorticoid receptor (GR) binding using ToxCast data. This has been done using an automated computational algorithm to perform maximal common substructure searches on chemical binders for each target from the ToxCast dataset. The models developed show a high level of accuracy, correctly assigning 87.20% of AR binders and 96.81% of GR binders in a 25% test set using holdout cross-validation. The 2D structural alerts developed can be used as in silico models to predict these MIEs, and as guidance for in vitro ToxCast assays to confirm hits. These models can target such experimental work, reducing the number of assays to be performed to gain required toxicological insight. Development of these models has also allowed some structural alerts to be identified as predictors for agonist or antagonist behavior at the receptor target. This work represents a first step in using computational methods to guide and target experimental approaches.

Allen, Timothy H.↗

In Vitro Encapsulation of Functionally Active Abiotic Photosensitizers Inside a Bacterial Microcompartment Shell

Bacterial microcompartments (BMCs) are self-assembling, selectively permeable protein shells that encapsulate enzymes to enhance catalytic efficiency of segments of metabolic pathways through means of confinement. The modular nature of BMC shells' structure and assembly enables programming of shell permeability and underscores their promise in biotechnology engineering efforts for applications in industry, medicine, and clean energy. Realizing this potential requires methods for encapsulation of abiotic molecules, which have been developed here for the first time. We report in vitro cargo loading of BMC shells with ruthenium photosensitizers (RuPS) by two approaches-one involving site-specific covalent labeling and the other driven by diffusion, requiring no specific interactions between cargo molecules and shell proteins. The highly stable shells retain encapsulated cargo over 1 week without egress and preserve RuPS photophysical activity. Finally, this study is an important foundation for further work that will converge biological BMC architecture with synthetic chemistry to facilitate biohybrid photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correction to “Self-Assembly of Accumulated Sphingolipids into Cytotoxic Fibrils in Globoid Cell Leukodystrophy and Their Inhibition by Small Molecules in Vitro”

Dr. Laor Bar-Yosef was significantly involved in the introduction and use of the Raman microspectroscopy part of this project. She was a major contributor to the novel conceptual use of this technology for detecting and monitoring sphingolipids in vitro and in cells. As expected from her deep involvement, Dr. Laor Bar-Yosef took part in analyzing the corresponding results.

Kumar, Sourav [Tel Aviv University (Israel)] (ORCI↗

Engineering a new-to-nature cascade for phosphate-dependent formate to formaldehyde conversion in vitro and in vivo

Formate can be envisioned at the core of a carbon-neutral bioeconomy, where it is produced from CO 2 by (electro-)chemical means and converted into value-added products by enzymatic cascades or engineered microbes. A key step in expanding synthetic formate assimilation is its thermodynamically challenging reduction to formaldehyde. Here, we develop a two-enzyme route in which formate is activated to formyl phosphate and subsequently reduced to formaldehyde. Exploiting the promiscuity of acetate kinase and N-acetyl-γ-glutamyl phosphate reductase, we demonstrate this phosphate (P i )-based route in vitro and in vivo. We further engineer a formyl phosphate reductase variant with improved formyl phosphate conversion in vivo by suppressing cross-talk with native metabolism and interface the P i route with a recently developed formaldehyde assimilation pathway to enable C2 compound formation from formate as the sole carbon source in Escherichia coli. The P i route therefore offers a potent tool in expanding the landscape of synthetic formate assimilation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Expanding the substrate scope of pyrrolysyl-transfer RNA synthetase enzymes to include non-$α$-amino acids in vitro and in vivo

The absence of orthogonal aminoacyl-transfer RNA (tRNA) synthetases that accept non-L-α-amino acids is a primary bottleneck hindering the in vivo translation of sequence-defined hetero-oligomers and biomaterials. Here we report that pyrrolysyl-tRNA synthetase (PylRS) and certain PylRS variants accept α-hydroxy, α-thio and N-formyl-L-α-amino acids, as well as α-carboxy acid monomers that are precursors to polyketide natural products. These monomers are accommodated and accepted by the translation apparatus in vitro; those with reactive nucleophiles are incorporated into proteins in vivo. High-resolution structural analysis of the complex formed between one PylRS enzyme and a m-substituted 2-benzylmalonic acid derivative revealed an active site that discriminates prochiral carboxylates and accommodates the large size and distinct electrostatics of an α-carboxy substituent. This work emphasizes the potential of PylRS-derived enzymes for acylating tRNA with monomers whose α-substituent diverges substantially from the α-amine of proteinogenic amino acids. These enzymes or derivatives thereof could synergize with natural or evolved ribosomes and/or translation factors to generate diverse sequence-defined non-protein heteropolymers.

59 BASIC BIOLOGICAL SCIENCES↗

In vitro prototyping and rapid optimization of biosynthetic enzymes for cell design

The design and optimization of biosynthetic pathways for industrially relevant, non-model organisms is challenging due to transformation idiosyncrasies, reduced numbers of validated genetic parts and a lack of high-throughput workflows. Here we describe a platform for in vitro prototyping and rapid optimization of biosynthetic enzymes (iPROBE) to accelerate this process. In iPROBE, cell lysates are enriched with biosynthetic enzymes by cell-free protein synthesis and then metabolic pathways are assembled in a mix-and-match fashion to assess pathway performance. We demonstrate iPROBE by screening 54 different cell-free pathways for 3-hydroxybutyrate production and optimizing a six-step butanol pathway across 205 permutations using data-driven design. Observing a strong correlation (r = 0.79) between cell-free and cellular performance, we then scaled up our highest-performing pathway, which improved in vivo 3-HB production in Clostridium by 20-fold to 14.63 ± 0.48 g l -1 . Finally, we expect iPROBE to accelerate design–build–test cycles for industrial biotechnology.

36 MATERIALS SCIENCE↗

Impact of sunitinib resistance on clear cell renal cell carcinoma therapeutic sensitivity in vitro

Sunitinib resistance creates a major clinical challenge for the treatment of advanced clear cell renal cell carcinoma (ccRCC) and functional and metabolic changes linked to sunitinib resistance are not fully understood. We sought to characterize the molecular and metabolic changes induced by the development of sunitinib resistance in ccRCC by developing and characterizing two human ccRCC cell lines resistant to sunitinib. Consistent with the literature, sunitinib-resistant ccRCC cell lines presented an aberrant overexpression of Axl and PD-L1, as well as a metabolic rewiring characterized by enhanced OXPHOS and glutamine metabolism. Therapeutic challenges of sunitinib-resistant ccRCC cell lines in vitro using small molecule inhibitors targeting Axl, AMPK and p38, as well as using PD-L1 blocking therapeutic antibodies, showed limited CTL-mediated cytotoxicity in a co-culture model. However, the AMPK activator metformin appears to sensitize the effect of PD-L1 blocking therapeutic antibodies and to enhance CTLs’ cytotoxic effects on ccRCC cells. These effects were not broadly observed with the Axl and the p38 inhibitors. Taken together, these data suggest that targeting certain pathways aberrantly activated by sunitinib resistance such as the AMPK/PDL1 axis might sensitize ccRCC to immunotherapies as a second-line therapeutic approach.

59 BASIC BIOLOGICAL SCIENCES↗

Optimization of Application-Driven Development of In Vitro Neuromuscular Junction Models

Neuromuscular junctions (NMJs) are specialized synapses responsible for signal transduction between motor neurons (MNs) and skeletal muscle tissue. Malfunction at this site can result from developmental disorders, toxic environmental exposures, and neurodegenerative diseases leading to severe neurological dysfunction. Exploring these conditions in human or animal subjects is restricted by ethical concerns and confounding environmental factors. Therefore, in vitro NMJ models provide exciting opportunities for advancements in tissue engineering. In the last two decades, multiple NMJ prototypes and platforms have been reported, and each model system design is strongly tied to a specific application: exploring developmental physiology, disease modeling, or high-throughput screening. Directing the differentiation of stem cells into mature MNs and/or skeletal muscle for NMJ modeling has provided critical cues to recapitulate early-stage development. Patient-derived inducible pluripotent stem cells provide a personalized approach to investigating NMJ disease, especially when disease etiology cannot be resolved down to a specific gene mutation. Having reproducible NMJ culture replicates is useful for high-throughput screening to evaluate drug toxicity and determine the impact of environmental threat exposures. Cutting-edge bioengineering techniques have propelled this field forward with innovative microfabrication and design approaches allowing both two-dimensional and three-dimensional NMJ culture models. Many of these NMJ systems require further validation for broader application by regulatory agencies, pharmaceutical companies, and the general research community. In this summary, we present a comprehensive review on the current state-of-art research in NMJ models and discuss their ability to provide valuable insight into cell and tissue interactions.

59 BASIC BIOLOGICAL SCIENCES↗