Body-fixed, three-axis reference system study Phase I final report
Strapped-down inertial reference assembly and digital computer for Saturn booster guidance
INERTIAL REFERENCE SYSTEM↗
SEARCH · Search NASA
Results for “INERTIAL GUIDANCE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
ERC V/STOL program flight test plan. H-19 flight program phases 1A and 1B, Wallops Station, Virginia
Flight test program to obtain data on aided inertial system for terminal guidance and navigation of helicopter in designing V/STOL avionics system
Source record↗
Apollo guidance, navigation, and control: Candidate configuration trade study, Stellar-Inertial Measurement System (SIMS) for an Earth Observation Satellite (EOS)
The ten candidate SIMS configurations were reduced to three in preparation for the final trade comparison. The report emphasizes subsystem design trades, star availability studies, data processing (smoothing) methods, and the analytical and simulation studies at subsystem and system levels from which candidate accuracy estimates will be presented.
Ogletree, G.↗
Inertial navigation/calibration/precise time and frequency capabilities
The Aerospace Guidance and Metrology Center was conceived in 1959 to be the US Air Force Inertial Navigation and Metrology Center. This paper will show the mission capabilities of the Inertial Navigation Maintenance Center and the Air Force Measurement and Standards Laboratory. Highlighted will be the precise time and frequency program developed by AGMC to support Air Force precise time and frequency requirements worldwide. A description of the past, present, and future precise time and frequency activities will be presented.
Galloway, L. M.↗
Integrated INS/GPS attitude determination for manned space flight
The promise and technical feasibility of a GPS sensor updating inertial attitude for the guidance, navigation, and control (GN&C) and the flight control system functions of spacecraft are demonstrated. Attitude control simulations are reported which suggest that GPS/INS systems will be as suitable as astroinertial GN&C systems of future space vehicle navigation. However, arcsec attitude accuracy star trackers will still be required for special payloads. HT need for international cooperation and agreements before worldwide implementation can be achieved is emphasized.
Anderman, Alfred↗
IUS guidance algorithm gamma guide assessment
The Gamma Guidance Algorithm which controls the inertial upper stage is described. The results of an independent assessment of the algorithm's performance in satisfying the NASA missions' targeting objectives are presented. The results of a launch window analysis for a Galileo mission, and suggested improvements are included.
Bray, R. E.↗
Optimal control of aeroassisted plane change maneuver using feedback expansions
A guidance law for an aeroassisted plane change maneuver is developed by an asymptotic expansion technique using a small parameter which essentially represents the ratio of the inertial forces to the atmospheric forces. This guidance law minimizes the energy loss while meeting terminal constraints on the altitude, flight path angle, and heading angle. By neglecting the inertial forces, the resulting optimization problem is integrable and can be determined in closed form. This zeroth-order solution is the first term in an asymptotic series solution of the Hamilton-Jacobi-Bellman equation. The remaining terms are determined from the solution of a first-order, linear partial differential equation whose solution requires only quadrature integration. Our initial results in using this guidance scheme are encouraging.
Mishne, D.↗
Navigation for space shuttle approach and landing using an inertial navigation system augmented by data from a precision ranging system or a microwave scan beam landing guidance system
A preliminary study has been made of the navigation performance which might be achieved for the high cross-range space shuttle orbiter during final approach and landing by using an optimally augmented inertial navigation system. Computed navigation accuracies are presented for an on-board inertial navigation system augmented (by means of an optimal filter algorithm) with data from two different ground navigation aids; a precision ranging system and a microwave scanning beam landing guidance system. These results show that augmentation with either type of ground navigation aid is capable of providing a navigation performance at touchdown which should be adequate for the space shuttle. In addition, adequate navigation performance for space shuttle landing is obtainable from the precision ranging system even with a complete dropout of precision range measurements as much as 100 seconds before touchdown.
Mcgee, L. A.↗
Mars 2020 Perseverance Entry Controller Design and Flight Reconstruction
On February 18th, 2021, NASA landed Perseverance on the Jezero crater (on Mars). An entry Guidance, Navigation, and Control (GNC) system delivered the vehicle to the desired landing ellipse. The navigation filter propagated position and attitude states initialized from cruise using Inertial Measurement Unit (IMU) measurements. The entry guidance modulated the lift vector through bank commands to reach the parachute deploy conditions. The entry controller commanded the propulsive Reaction Control System (RCS) to track the bank commands while doing rate damping on angle-of-attack and sideslip. This paper describes the design and the as-flown performance of the entry controller.
Way, David W.↗
Inertial measurement units and pulse torquing
Inertial measurement unit, pulsed integrating pendulous accelerometer, and coupling data unit of Apollo guidance and control system
MANNED SPACE FLIGHT↗
Sensor Data Quality and Angular Rate Down-Selection Algorithms on SLS EM-1
The NASA Space Launch System Block 1 launch vehicle is equipped with an Inertial Navigation System (INS) and multiple Rate Gyro Assemblies (RGA) that are used in the Guidance, Navigation, and Control (GN&C) algorithms. The INS provides the inertial position, velocity, and attitude of the vehicle along with both angular rate and specific force measurements. Additionally, multiple sets of co-located rate gyros supply angular rate data. The collection of angular rate data, taken along the launch vehicle, is used to separate out vehicle motion from flexible body dynamics. Since the system architecture uses redundant sensors, the capability was developed to evaluate the health (or validity) of the independent measurements. A suite of Sensor Data Quality (SDQ) algorithms is responsible for assessing the angular rate data from the redundant sensors. When failures are detected, SDQ will take the appropriate action and disqualify or remove faulted sensors from forward processing. Additionally, the SDQ algorithms contain logic for down-selecting the angular rate data used by the GNC software from the set of healthy measurements. This paper explores the trades and analyses that were performed in selecting a set of robust fault-detection algorithms included in the GN&C flight software. These trades included both an assessment of hardware-provided health and status data as well as an evaluation of different algorithms based on time-to-detection, type of failures detected, and probability of detecting false positives. We then provide an overview of the algorithms used for both fault-detection and measurement down selection. We next discuss the role of trajectory design, flexible-body models, and vehicle response to off-nominal conditions in setting the detection thresholds. Lastly, we present lessons learned from software integration and hardware-in-the-loop testing.
Park, Thomas↗
Sensor Data Quality and Angular Rate Down-Selection Algorithms on SLS EM-1
The NASA Space Launch System Block 1 launch vehicle is equipped with an Inertial Navigation System (INS) and multiple Rate Gyro Assemblies (RGA) that are used in the Guidance, Navigation, and Control (GN&C) algorithms. The INS provides the inertial position, velocity, and attitude of the vehicle along with both angular rate and specific force measurements. Additionally, multiple sets of co-located rate gyros supply angular rate data. The collection of angular rate data, taken along the launch vehicle, is used to separate out vehicle motion from flexible body dynamics. Since the system architecture uses redundant sensors, the capability was developed to evaluate the health (or validity) of the independent measurements. A suite of Sensor Data Quality (SDQ) algorithms is responsible for assessing the angular rate data from the redundant sensors. When failures are detected, SDQ will take the appropriate action and disqualify or remove faulted sensors from forward processing. Additionally, the SDQ algorithms contain logic for down-selecting the angular rate data used by the GN&C software from the set of healthy measurements. This paper provides an overview of the algorithms used for both fault-detection and measurement down selection.
Park, Thomas↗
Conceptual nonorthogonal gyro configuration for guidance and navigation
Nonorthogonal sensor configuration using six single-degree-of-freedom inertial reference gyroscopes and a complete data processing and self-contained failure detection-and-isolation mechanism provides redundant capabilities to guidance and navigation systems. This system has been formulated in a strap-down configuration to attain maximum redundancy.
Gilmore, J. P.↗
Standardized strapdown inertial component modularity study, volume 2
To obtain cost effective strapdown navigation, guidance and stabilization systems to meet anticipated future needs a standardized modularized strapdown system concept is proposed. Three performance classes, high, medium and low, are suggested to meet the range of applications. Candidate inertial instruments are selected and analyzed for interface compatibility. Electronic packaging and processing, materials and thermal considerations applying to the three classes are discussed and recommendations advanced. Opportunities for automatic fault detection and redundancy are presented. The smallest gyro and accelerometer modules are projected as requiring a volume of 26 cubic inches and 23.6 cubic inches, respectively. Corresponding power dissipation is projected as 5 watts, and 2.6 watts respectively.
Feldman, J.↗
Interplanetary guidance system requirements study. Volume 2 - Computer program descriptions. Part 10 - Program description for performance assessment of low thrust space guidance systems, version 1
Computerized simulation of mission profiles for inertial navigation of low thrust spacecraft in both heliocentric transfer and planetocentric spiral
Source record↗
Clamping assembly for inertial components Patent
Inertial component clamping assembly design for spacecraft guidance and control system mounting
Denaci, D. E.↗
GOES-16 On-Orbit Dual Isolation Performance Characterization Results
The Geostationary Operational Environmental Satellite-R Series (GOES-R) is the first of the next generation geostationary weather satellites. GOES-R successfully launched on November19, 2016 and renamed GOES-16 upon entering geostationary orbit. Subsequently, GOES-16post-launch testing began. This paper presents the GOES-16 Satellite Dynamic Interaction Characterization results for the Earth Pointed Platform (EPP) stowed, referred to as the Reaction Wheel Assembly (RWA) Isolation Only configuration, and deployed, referred to as the Dual Isolation configuration. GOES-R represents a quantum increase in Earth and solar weather observation capabilities, with 4 times the resolution, 5 times the observation rate, and 3 times the number of spectral bands for Earth observations. With the improved resolution, comes the instrument suites increased sensitivity to disturbances over a broad spectrum 0-512Hz. Sources of disturbance include reaction wheels, thruster firings for station keeping and momentum management, gimbal motion, and internal instrument disturbances. To minimize the impact of these disturbances, the baseline design included an EPP, a stiff optical bench to which the two nadir pointed instruments are collocated together with the Guidance Navigation Control (GNC) star trackers and Inertial Measurement Units (IMUs). The EPP is passively isolated from the spacecraft bus with Honeywell D-Strut isolators providing attenuation for frequencies above 5 Hz in all six degrees-of-freedom. To reduce the risk of wheel disturbances impacting performance, a secondary passive isolation system manufactured by Moog CSA Engineering was incorporated under each of the six 160 Nms reaction wheels, tuned to provide attenuation at frequencies above 50 Hz. Integrated wheel and isolator testing was performed on a Kistler table at NASA Goddard Space Flight Center. Pre-launch Satellite Dynamic Interaction Characterization high-fidelity simulations and ground testing were conducted to evaluate jitter performance for two cases: 1) deployed EPP and reaction wheel (Dual Isolation) and 2) EPP hard mounted (RWA Isolation Only) to the spacecraft. A comparison of pre-launch to post-launch Satellite Dynamic Interaction Characterization results are also presented in this paper.
Carter, Delano↗