Search NASA⌕ Search

SEARCH · Search NASA

Results for “IR spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Control of Catalyst Isomers Using an N -Phenyl-Substituted RN(CH 2 CH 2 P i Pr 2 ) 2 Pincer Ligand in CO 2 Hydrogenation and Formic Acid Dehydrogenation

A novel pincer ligand, i Pr PN Ph P [PhN- (CH 2 CH 2 P i Pr 2 ) 2 ], which is an analogue of the versatile MACHO ligand, iPr PN H P [HN(CH 2 CH 2 P i Pr 2 ) 2 ], was synthesized and characterized. The ligand was coordinated to ruthenium, and a series of hydride-containing complexes were isolated and characterized by NMR and IR spectroscopies, as well as X-ray diffraction. Comparisons to previously published analogues ligated by iPr PN H P and iPr PN Me P [CH 3 N(CH 2 CH 2 P i Pr 2 ) 2 ] illustrate that there are large changes in the coordination chemistry that occur when the nitrogen substituent of the pincer ligand is altered. For example, ruthenium hydrides supported by the iPr PN Ph P ligand always form the syn isomer (where syn/anti refer to the relative orientation of the group on nitrogen and the hydride ligand on ruthenium), whereas complexes supported by iPr PN H P form the anti isomer and complexes supported by iPr PN Me P form a mixture of syn and anti isomers. We evaluated the impact of the nitrogen substituent of the pincer ligand in catalysis by comparing a series of iPr PN R P (R = H, Me, Ph)-ligated ruthenium hydride complexes as catalysts for formic acid dehydrogenation and carbon dioxide (CO 2 ) hydrogenation to formate. The iPr PN Ph P-ligated species is the most active for formic acid dehydrogenation, and mechanistic studies suggest that this is likely because there are kinetic advantages for catalysts that operate via the syn isomer. In CO 2 hydrogenation, the iPr PN Ph P-ligated species is again the most active under our optimal conditions, and we report some of the highest turnover frequencies for homogeneous catalysts. Experimental and theoretical insights into the turnover-limiting step of catalysis provide a basis for the observed trends in catalytic activity. Additionally, the stability of our complexes enabled us to detect a previously unobserved autocatalytic effect involving the base that is added to drive the reaction. Overall, by modifying the nitrogen substituent on the MACHO ligand, we have developed highly active catalysts for formic acid dehydrogenation and CO 2 hydrogenation and also provided a framework for future catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Weakening the N–H Bonds of NH 3 Ligands: Triple Hydrogen-Atom Abstraction to Form a Chromium(V) Nitride

Weakening and cleaving N-H bonds is crucial for improving molecular ammonia oxidation catalysts. In this work, we report the synthesis and hydrogen atom abstraction chemistry of bis(ammonia) Cr porphyrin complexes Cr(TPP)(NH 3 ) 2 and Cr(TMP)(NH 3 ) 2 (TPP = 5,10,15,20-tetraphenyl-meso-porphyrin and TMP = 5,10,15,20-tetramesityl-meso-porphyrin) using bulky aryloxyl radicals. The triple hydrogen atom abstraction reaction results in the formation of Cr V (por)(≡N), with the nitride deriving from ammonia, as indicated by UV-Vis and FT-IR spectroscopy, and a single crystal structural determination of Cr(TPP)(≡N). Subsequent oxidation of this chromium(V)-nitrido complex results in the formation of Cr III (por), with scission of the Cr≡N bond. A computational analysis illustrates the progression from Cr II to Cr V and evaluates the energetics of abstracting hydrogen atoms from Cr II -NH 3 to generate Cr V ≡N. The formation and isolation of Cr V (por)(≡N) illustrates the stability of these species and the need to chemically activate the nitride moiety for atom transfer or N-N coupling reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Solid-State Transformation of Uranyl Peroxide Materials through High-Level Irradiation

The solid-state transformation of sodium uranyl triperoxide (Na 4 (UO 2 )(O 2 ) 3 ·9H 2 O, NaUT) to sodium uranyl tricarbonate (Na 4 (UO 2 )(CO 3 ) 3 ) by radiolysis was observed for the first time. The exposure of NaUT to 3 MGy gamma irradiation resulted in partial breakdown of the peroxides forming a mixed peroxide and carbonate species. The effects of He-ion irradiation on NaUT were also investigated up to 225 MGy using both hydrated argon and dry argon. The complete conversion to the uranyl tricarbonate phase by 56 MGy was done using hydrated argon, while dry argon did not fully convert showing the importance of water in the system. He-ion irradiated NaUT samples all convert to the tricarbonate phase with time in air post radiation exposure. This transition was monitored via Raman spectroscopy, infrared spectroscopy (IR), and powder X-ray diffraction (PXRD) to further confirm the identity of the final product as the sodium uranyl tricarbonate, čejkaite. Furthermore, this transformation outlines a mechanism for the mobility of uranyl in natural environments and in the Hanford tanks.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Effects of He-Ion Radiation on Solid-State Uranyl Nitrate Compounds under Dry and Hydrated Atmospheric Conditions

Radioactive decay of uranium (U) and its related daughter/fission products emit ionizing radiation, including γ (γ) rays and α (α) particles, that result in the formation of radical species and induce chemical reactivity in materials. While radioactivity is inherent to the chemistry of U there are limited studies that detail changes at an atomistic level. Here, this work describes the He-ion radiolysis of four solid-state U(VI) species: [UO 2 (NO 3 ) 2 ]·3(H 2 O) and M[UO 2 (NO 3 ) 3 ] (M = K + , Rb + , Cs + ). These materials were irradiated under different conditions (i.e. closed, open – Ar gas, or open – H 2 O-saturated Ar gas) to further evaluate the impact of water radiolysis on the chemical modification of these materials. Pre- and post-irradiation analyses were conducted using EPR, Raman, and ATR-IR spectroscopy on materials irradiated to 0, 5, 10, and 25 MGy. The results indicated the presence of nitrate radical (NO 3 • ) formation in all solid-state materials with similarities to those observed in γ-radiation studies. Irradiation of [UO 2 (NO 3 ) 2 ]·3(H 2 O) did not show evidence of reactive oxygen species bound to the U(VI) cation under inert conditions; however, surface reactivity was observed for samples irradiated in the H 2 O-saturated environment. Similar chemical changes were observed in the uranyl trinitrato compounds irradiated in the presence of H 2 O vapor and there were observed differences in the reactivity depending on the identity of the alkali cation.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2026

Unimolecular Dynamics of Partially Deuterated Hydroperoxyalkyl Intermediates (•QOOD) in Cyclohexane and Cyclopentane Oxidation

The hydroperoxyalkyl radicals (•QOOH) formed in cyclohexane and cyclopentane oxidation with carbon radical center at the β site relative to the hydroperoxy group have recently been observed through their infrared fingerprint and time- and energy-resolved unimolecular dissociation dynamics to hydroxyl (OH) radical and cyclic ether products. Partial deuteration shifts the IR transitions associated with OH/OD motion to lower frequencies, providing a new window on the IR spectroscopy and unimolecular dynamics of these transient intermediates. Specifically, the overtone OD stretch (2ν OD ) has been identified at 5215.0 cm –1 and 5216.0 cm –1 for the β-QOOD intermediates in cyclohexane and cyclopentane oxidation, respectively. Unimolecular decay rates of the •QOOD intermediates at these energies have been obtained from the time-resolved appearance of OD products. The experimental rates are compared with statistical microcanonical rates evaluated using RRKM theory, including heavy-atom tunneling associated with simultaneous O–O bond elongation and C–O–O angle contraction along the reaction pathway. The experimental rates provide a further test of the previously determined transition state (TS) barriers, which were computed utilizing a benchmarking approach that builds on higher-level reference calculations for the smaller ethane oxidation system. Here, the experimental rate measurements for both •QOOD intermediates agree well with the computed rates after accounting for small changes in zero-point energy and a minor empirical adjustment of the TS barriers in both systems.

Ethers↗
DOE OSTI2022

Reduction of CO 2 and CS 2 with Uranium(III) Metallocene Aryloxides

Herein, the reactivity of two metallocene aryloxide U(III) complexes, [(C 5 Me 5 ) 2 U(O-Ar)], Ar = 4- t BuC 6 H 4 , 1; Ar = 2,6- t Bu 2 -4-CH 3 C 6 H 2 (BHT), 3, with CO 2 and CS 2 has been investigated. The reaction of 1 with CO 2 produces a bridging oxo complex, [{(C 5 Me 5 ) 2 (4- t BuC 6 H 4 -O)U} 2 (μ 2 -O)], 4, while 3 with CO 2 results in reductive disproportionation to form the bridging carbonate species, [{(C 5 Me 5 ) 2 (BHT)U} 2 (μ 2 -κ 2 :η 1 -CO 3 )], 5. The difference in reactivity can be attributed to the steric properties of the ligand because the reaction of 3 with an oxo-delivering agent yields a U(V) terminal oxo complex, [(C 5 Me 5 ) 2 (BHT)U=O], 6. Reduction of CS 2 to form a bridging (CS 2 ) 2- ligand, [{(C 5 Me 5 ) 2 (tBuC 6 H 4 -O)U}2(μ 2 -CS 2 )], 7, is observed with 1, while the reaction of 3 with CS 2 also produces a bridging (CS 2 ) 2- reduced ligand complex, followed by C-H bond activation of a methyl group from one (C5Me 5 ) 1- ring, [(C5Me 5 ) 2 (BHT)U{μ 2 -C(H)S 2 }U(C 5 Me 4 CH 2 )(C 5 Me 5 )(BHT)], 8. All compounds are characterized by NMR and IR spectroscopy, and their solid-state structures are determined by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Direct Multimodal Nanoscale Visualization of Early Phosphorus-Based Antiwear Tribofilm Formation

Understanding the mechanism of antiwear (AW) tribofilm formation and how to tune surface chemistry to control functionality is essential for the development of the next generation of oil lubricants. In particular, understanding and optimizing early AW tribofilm formation can increase the energy efficiency of mechanical systems. However, the mechanism for how these films form is not well understood. The majority of prior work has focused on analyzing only end-of-test surfaces long after the film has formed. In this work, we develop an in situ multimodal chemical imaging methodology to directly visualize the early formation of AW films on steel surfaces. We investigate an oil formulation containing a phosphorus-based additive commonly used to protect surfaces from wear and fatigue processes in machine elements, such as gears, bearings, and sliding contacts. Using nanoscale multimodal chemical imaging on combined platforms of atomic force microscopy (AFM) coupled directly with in situ nano-infrared (nano-IR) spectroscopy, and further combined ex situ with time-of-flight secondary ion mass spectrometry (ToF-SIMS), we demonstrate a direct correlation between changes in friction and local surface chemistry. In these experiments, the AFM probe acts as a single asperity contact to generate the tribofilm as well as a tool to analyze it in situ as it is forming. To verify our in situ measurements, we compare these results to the ex situ ToF-SIMS of macroscale block-on-ring tribometer-formed samples. We report the understanding gained here on how AW films form and how film properties can be modified by tuning the chemistry of the additives will facilitate developing transmission fluids to meet increasing demands for vehicle performance and efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Robust Self-Healing Adhesives Based on Dynamic Urethane Exchange Reactions

Thermoset polyurethanes (PUs) have been successfully reprocessed as covalent adaptable networks (CANs) by catalyzing carbamate exchange. Here we extend bond exchange beyond the internal network cross-links to create a dynamic urethane adhesive. Interfacing PU CANs to substrates with nucleophilic functional groups creates adhesives capable of reversible transcarbamoylation with the substrate, which has not been demonstrated previously by CAN adhesives. Two types of thermoset PU films were synthesized, one containing the green carbamate exchange catalyst Zr(tmhd)4 and the other containing no catalyst. Although otherwise identical in chemical and network properties, as indicated by FT-IR spectroscopy and dynamic mechanical thermal analysis (DMTA), the film containing catalyst showed dynamic bond exchange behavior through stress relaxation analysis. When evaluated as an adhesive, the CAN film exhibited self-healing properties and retained its adhesive strength for five cycles, which is attributed to reversible covalent bonding to the glass substrate. Furthermore, this work expands industrially relevant CANs to structural adhesives and demonstrates their potential value in an application that presently employs PUs as single-use materials.

adhesive↗
DOE OSTI2021

In Situ Strong Metal–Support Interaction (SMSI) Affects Catalytic Alcohol Conversion

Strong metal–support interactions (SMSIs) and catalyst deactivation have been heavily researched for decades by the catalysis community. The promotion of SMSIs in supported metal oxides is commonly associated with H 2 treatment at high temperature (>500 °C), and catalyst deactivation is commonly attributed to sintering, leaching of the active metal, and overoxidation of the metal, as well as strong adsorption of reaction intermediates. Alcohols can reduce metal oxides, and thus here we have hypothesized that catalytic conversion of alcohols can promote SMSIs in situ . In this work we show, via IR spectroscopy of CO adsorption and electron energy loss spectroscopy (EELS), that during 2-propanol conversion over Pd/TiO 2 coverage of Pd sites occurs due to SMSIs at low reaction temperatures (as low as ~ 190 °C). The emergence of SMSIs during the reaction ( in situ ) explains the apparent catalyst deactivation when the reaction temperature is varied. A steady-state isotopic transient kinetic analysis (SSITKA) shows that the intrinsic reactivity of the catalytic sites does not change with temperature when SMSI is promoted in situ ; rather, the number of available active sites changes (when a TiO x layer migrates over Pd NPs). SMSI generated during the reaction fully reverses upon exposure to O 2 at room temperature for ~15 h, which may have made their identification elusive up to now.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into Nonoxidative Ethanol Dehydrogenation on NiCu Single-Atom Alloys

Ethanol dehydrogenation presents a promising pathway towards the production of acetaldehyde, a valuable building block in chemicals production. Under non-oxidative conditions, the reaction is facilitated by supported Cu nanoparticles which afford reasonable activity and high selectivity. The stability issues associated with Cu nanoparticle sintering can be addressed by the addition of small amounts of Ni, which further boost reactivity while retaining selectivity. Despite the promise of NiCu single-atom alloys for non-oxidative ethanol dehydrogenation, little is known about the role of each component and the pathway of this mechanistically complex process. Herein, kinetic investigations from reactor tests identify C-H bond scission as the rate limiting step, while 1-hydroxyethyl is detected as the intermediate via IR spectroscopy. Temperature program desorption studies are employed to examine the effect of Ni coverage and to demonstrate that Ni atoms activate ethanol selectively at lower temperatures, resulting in higher acetaldehyde yield than pure Cu. Temperature program desorption experiments also reveal the spillover of intermediates from the Ni atom to neighboring Cu sites as a relevant step in the reaction pathway. Density functional theory calculations are used to investigate the 2 reaction energetics and to confirm that C-H bond scission is the initial reaction step, while a clear effect of H 2 partial pressure on the reaction pathway is realized. Further, counter to the expected behavior that all reaction steps take place on the Ni atoms, our degree of rate control analysis reveals that a mechanism involving spillover of the 1-hydroxyethyl intermediate from the Ni atom to the Cu surface, where it will dehydrogenate further, is more likely. Furthermore, our combined kinetic, spectroscopic, and theoretical approach sheds light on this complex reaction mechanism and represents a promising method for the understanding and designing of highly active, selective, and stable single-atom alloys for other multistep catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Solvent Reorganization and Surface–Species Interactions Control Transfer Hydrogenation Rates in Sn-Beta Zeolites

Reorganization of confined alcohol networks reshapes adsorption and activation thermodynamics in Lewis acid zeolites, yet the roles of adsorbate sterics and non-H-bonding cosolvents remain unclear. Here, we investigate transfer hydrogenation of methyl- (mCH) and tert-butylcyclohexanone (tbCH) with 2-butanol over hydrophobic Sn-Beta. First-order rates per defect-open Sn site are 2–5× higher for mCH than tbCH, but converge in the zero-order regime (333–393 K), indicating that solvent reorganization entropically drives adsorption, while bond activation is insensitive to ketone structure. Reactions in toluene or acetonitrile (with 1 M 2-butanol) show that intraporous solvent organization governs transition-state stabilization: on hydrophobic Sn-Beta, apparent enthalpies and entropies rise with decreasing solvent polarity, whereas hydrophilic zeolites display nearly constant barriers across solvents. Liquid-phase IR spectroscopy corroborates these trends, showing that hydrophilic pores enforce 2-butanol-like solvation environments even in toluene. Together, these results reveal how zeolite pores regulate the intraporous solvent structure, whose reorganization upon adsorption reshapes the thermodynamic landscape of Lewis acid catalysis

Adsorption↗
DOE OSTI2026

Synergistic Interactions During Co-Hydrothermal Liquefaction of Food Waste and Biomass Model Compounds for Increased Sustainable Aviation Fuel Production

Hydrothermal liquefaction (HTL) of lignocellulosic biomass is plagued with low biocrude yields owing to the tendency of highly reactive oxygenated intermediates to condense to form biochars. By contrast, the high protein content in food waste is comprised of substantial nitrogen species, which are known to interact strongly with oxygenates through Maillard, amide, and peptide bond formation reactions. Co-feeding food waste and lignocellulose opens new reaction pathways for biocrude formation but is currently poorly understood. This work evaluated the molecular level interactions between food waste and lignocellulose model compounds and the corresponding effect on product yields and quality. Food waste–cellulose and food waste–xylan feedstock blends achieved maximum biocrude carbon yield improvements of 12.2% and 10.1%, respectively, relative to a simple linear model that interpolates between the yields of the pure feedstocks. Increases in biocrude yield were balanced by corresponding decreases in char yield, indicating synergistic interactions between the feeds during HTL. Biocrude volatility analysis revealed that increased biocrude yield preferentially benefitted the jet fuel fraction, which comprised up to 22.6% of the total carbon yield for food waste–cellulose blends. Biocrude and char were analyzed using GC–MS and FT-IR spectroscopy to investigate the source of synergistic trends and provide greater mechanistic understanding. Key cofeeding effects included the promotion of retro-aldol condensation reactions and trans-esterification of fatty acids, sequestering carbon in the biocrude phase via the inhibition of char formation while increasing biocrude volatility toward jet fuel-range compounds. These results indicate the potential for judicious selection of HTL cofeeds to increase both biocrude yield and selectivity to desired fuel precursors, including sustainable aviation fuel.

Maillard reaction↗
DOE OSTI2025

Assessing the Effect of Explicit Polarizability on Models of Carbon Dioxide Solvation in Ionic Liquids

Ionic liquids are an important possible carbon capture material because of their anomalously high sorption selectivity for carbon dioxide over other gases common in air. Many research groups have investigated the molecular origins of this property and provided important insights, including using 1D and 2D-IR spectroscopy. Molecular dynamics simulations have been indispensable to the interpretation of these experiments. In prior molecular dynamics simulation work, charge-scaled force fields have typically been used to provide a mean-field treatment of effects vital to ionic liquid systems such as charge transfer and polarization. Here, we compare models of carbon dioxide solvated in ionic liquids with explicit polarization to models of the same with implicit polarizability through charge-scaling. We calculate structural, dynamical, and spectroscopic properties, and make comparisons to the same items measured in experiment. In this study, we focus on two ionic liquids: 1-butyl-3- methylimidazolium (BMIM + ) paired with bis(trifluoromethane sulfonyl imide) (Tf 2 N − ) and 1-butyl-3-methylimidazolium (BMIM+) paired with hexafluorophosphate (PF 6 − ). We find that many structural, dynamical, and spectroscopic properties are changed when polarization is modeled explicitly. We also find that explicit polarizability softens local ion cages around the carbon dioxide and that the long-time diffusion of the carbon dioxide is gated by the reorganization of the ionic liquid molecules. Comparisons to experiment show modest improvement of many observables compared with experiment for the explicitly polarizable model over the charge-scaled model. Overall, our results show that charge-scaled force fields are likely sufficient to compute spectroscopic properties of carbon dioxide in ionic liquids and suggest some interpretive rules for understanding their structural and dynamical properties. Those using charge-scaled force fields should generally assume that the ion cages around solutes such as carbon dioxide are too stiff and cation-rich in their models and adjust their interpretations and predictions accordingly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Crystallizing Atomic Xenon in a Flexible MOF to Probe and Understand Its Temperature-Dependent Breathing Behavior and Unusual Gas Adsorption Phenomenon

Flexible metal–organic frameworks (MOFs) hold great promise as smart materials for specific applications such as gas separation. These materials undergo interesting structural changes in response to guest molecules, which is often associated with unique adsorption behavior not possible for rigid MOFs. Understanding the dynamic behavior of flexible MOFs is crucial yet challenging as it involves weak host–guest interactions and subtle structural transformation not only at the atomic/molecular level but also in a nonsteady state. Here we report an in-depth study on the adsorbate- and temperature-dependent adsorption in a flexible MOF by crystallizing atomic gases into its pores. Mn(ina)2 shows an interesting temperature-dependent response toward noble gases. Its nonmonotonic, temperature-dependent adsorption profile results in an uptake maximum at a temperature threshold, a phenomenon that is unusual. Full characterization of Xe-loaded MOF structures is performed by in situ single-crystal and synchrotron X-ray diffraction, IR spectroscopy, and molecular modeling. The X-ray diffraction analysis offers a detailed explanation into the dynamic structural transformation and provides a convincing rationalization of the unique adsorption behavior at the molecular scale. The guest and temperature dependence of the structural breathing gives rise to an intriguing reverse of Xe/Kr adsorption selectivity as a function of temperature. The presented work may provide further understanding of the adsorption behavior of noble gases in flexible MOF structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrasmall Pd Clusters in FER Zeolite Alleviate CO Poisoning for Effective Low-Temperature Carbon Monoxide Oxidation

Ultra small Pd 4 clusters form in the micropores of FER zeolite during low temperature treatment (100 °C) in the presence of humid CO gas. They effectively catalyze CO oxidation below 100°C, whereas Pd nanoparticles are not active as they are poisoned by CO. Using catalytic measurements, infrared (IR) spectroscopy, X-ray absorption spectroscopy (EXAFS), microscopy, and density functional theory calculations we provide the molecular level insight into this previously unreported phenomenon. Pd nanoparticles get covered with CO at low temperatures which effectively blocks O 2 activation until CO desorption occurs. Small Pd clusters in zeolites, in contrast, demonstrate fluxional behavior in the presence of CO, which significantly increases their affinity for binding O 2 . In conclusion, our study shows a pathway for achieving low temperature CO oxidation activity on the basis of well-defined Pd/zeolite system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Switching of Protonation Sites in Hydrated Nicotine via a Grotthuss Mechanism

The switching of the protonation sites in hydrated nicotine, probed by experimental infrared (IR) spectroscopy and theoretical ab initio calculations, is facilitated via a Grotthuss instead of a bimolecular proton transfer (vehicle) mechanism at the experimental temperature (T = 130 K) as unambiguously confirmed by experiments with deuterated water. In contrast, the bimolecular vehicle mechanism is preferred at higher temperatures (T = 300 K) as determined by theory. Further, the Grotthuss mechanism for the concerted proton transfer results in the production of nicotine’s bioactive and addictive pyrrolidine-protonated (Pyrro-H + ) protomer with just 5 water molecules. Theoretical analysis suggests that the concerted proton transfer occurs via hydrogen-bonded bridges consisting of a 3 water molecule “core” that connects the pyridine protonated (Pyri-H + ) with the pyrrolidine-protonated (Pyrro-H + ) protomers. Additional water molecules attached as acceptors to the hydrogen-bonded “core” bridge result in lowering the reaction barrier of the concerted proton transfer down to less than 6 kcal/mol, which is consistent with the experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Distinct Kinetic Signatures of Photodesorption from Metal Nanoparticles

Visible photon fluxes can influence the rate and selectivity of heterogeneously catalyzed reactions on metal nanoparticle surfaces. Models describing the influence of photon fluxes have typically introduced photon flux dependent apparent thermal kinetic parameters (reaction orders, activation energies, binding energies, etc.). This has relied on empirical fitting of reaction rate data, making mechanistic interpretations of how photon fluxes influence elementary step rates challenging and inconsistent with fundamental descriptions of photochemistry on metal surfaces developed from surface science studies. Using the CO adsorption–desorption quasi-equilibrium reaction on Pt/Al 2 O 3 catalysts as a model system, we measured steady state adsorbed CO (CO*) coverages under isothermal and isobaric (1 mbar CO) conditions as a function of temperature (473–573 K) and of 440 nm photon flux ((0.1–5.2) × 10 3 # hv Pt site –1 s –1 ) using in situ IR spectroscopy. Steady state CO* coverage on Pt was photon flux dependent with increasing photon flux causing decreasing coverage, consistent with photons driving CO* desorption rates faster than thermal CO* desorption rates. However, photon flux dependent CO* coverages were essentially temperature independent, inconsistent with models that describe photon effects using perturbations to apparent thermal kinetic parameters. Instead, 120 steady state CO* coverages as a function of temperature and photon flux are quantitatively described by a kinetic model in which the overall desorption rate is a summation of independent thermal and photon induced CO* desorption rates. Site-resolved analysis reveals distinct kinetic parameters for photon driven desorption of CO* from well-coordinated, under-coordinated, and highly under-coordinated Pt sites, with temperature-dependent apparent quantum efficiencies (AQE) consistent with temperature dependence of vibrational quanta distribution of adsorbed CO. The rigorous kinetic rate laws for independent photon and thermal driven pathways allow for predictive modeling of the influence of photon fluxes on the rates of CO* desorption under catalytic conditions. Further, the analysis provides evidence that steady state continuous wave photon fluxes can drive desorption/adsorption reactions on metal surfaces out of thermal equilibrium, reconciling surface science observations of molecular photodesorption with applied catalysis. The work establishes a general kinetic framework to be considered for photon driven processes on metals, and defines catalyst, reaction, and photon flux characteristic design principles for breaking Sabatier limitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗