Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impact Mitigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Mitigating Data Center Impact on Grid Stability: A Coordinated Control Strategy Using Verrus StabiliGrid Architecture

Large data centers, which now represent a significant and growing share of the total U.S. grid load, can inadvertently destabilize the electrical grid when they disconnect simultaneously during brief voltage disturbances. The July 10, 2024, Eastern Interconnection incident, in which a sub-100-millisecond transmission fault triggered the cascading loss of approximately 1,500 MW of data center load, illustrates this vulnerability. While commercial battery energy storage systems (BESS) deployed in data centers provide device-level fault ride-through per IEEE 1547, they lack coordination with facility protection logic and uninterruptible power supplies (UPS), limiting their effectiveness as grid-stabilizing assets. This report presents the Verrus StabiliGrid architecture, a coordinated control framework that integrates BESS, UPS, and point-of-interconnection (POI) protection settings to enable data centers to ride through both undervoltage and overvoltage grid contingencies without disconnecting. The four-step strategy encompasses: (1) high-resolution power quality monitoring to detect the grid state during events such as undervoltage, overvoltage, underfrequency, and overfrequency; (2) POI protection settings that allow for extended ride-through and grid-connected operation during grid contingencies; (3) grid state-driven autonomous dispatch of assets to improve grid resilience by reducing power draw during undervoltage or absorbing more power during overvoltage events; and (4) coordinated post-recovery dispatch of data center assets to restore firm load to pre-contingency levels. Validated through controller-hardware-in-the-loop (C-HIL) simulations at the National Laboratory of the Rockies, results show grid import restoration to pre-fault levels within 100 milliseconds of voltage recovery. This work advances the ability of data centers to transition from passive, disturbance-sensitive loads to active participants in grid stability, a capability increasingly required by emerging NERC and ERCOT regulatory frameworks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2004

Mitigation of the Impact of Sensing Noise on the Precise Formation Flying Control Problem

The specific objectives of this proposed research were: 1. Further investigation into the impact of CDGPS sensing errors for high Earth orbit missions. 2. Identify augmentation approaches of the CDGPS that will improve the relative state for low and high Earth orbit missions. 3. Integration of the navigation and control concepts into the GSFC Formation Flying Testbed. In addition this was a cooperative effort with Dr. Jonathan How at MIT. Dr. Alfriend was to spend two weeks working with Dr. How and his students. The travel for these two weeks was paid by the Texas Engineering Experiment Station (TEES) as cost sharing.

Alfriend, K. T.↗
DOE OSTI2026

Ozone pollution reduction partially offsets the negative impact of climate change mitigation efforts on global hunger

Studies warning of the potential negative effects of climate mitigation on food security through the competing use of land for bioenergy and afforestation have overlooked the impact of reduced ozone and its potential enhancement of crop yields. Here we use six global agro-economic models to compare the impacts of climate change with climate mitigation policy and ozone reduction on agriculture. We find that ozone reduction could reduce the negative impact of a 1.5 °C-consistent climate change mitigation policy on global hunger by 15% in 2050. Sub-Saharan Africa and India, where hunger is most severe, account for 56% of this global reduction. Our findings indicate that the negative effects of climate mitigation on global hunger could be partially offset by the ozone reduction impact.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Genomic Signatures of a Major Adaptive Event in the Pathogenic Fungus Melampsora larici-populina

The recent availability of genome-wide sequencing techniques has allowed systematic screening for molecular signatures of adaptation, including in nonmodel organisms. Host–pathogen interactions constitute good models due to the strong selective pressures that they entail. We focused on an adaptive event which affected the poplar rust fungus Melampsora larici-populina when it overcame a resistance gene borne by its host, cultivated poplar. Based on 76 virulent and avirulent isolates framing narrowly the estimated date of the adaptive event, we examined the molecular signatures of selection. Using an array of genome scan methods based on different features of nucleotide diversity, we detected a single locus exhibiting a consistent pattern suggestive of a selective sweep in virulent individuals (excess of differentiation between virulent and avirulent samples, linkage disequilibrium, genotype–phenotype statistical association, and long-range haplotypes). Our study pinpoints a single gene and further a single amino acid replacement which may have allowed the adaptive event. Although our samples are nearly contemporary to the selective sweep, it does not seem to have affected genome diversity further than the immediate vicinity of the causal locus, which can be explained by a soft selective sweep (where selection acts on standing variation) and by the impact of recombination in mitigating the impact of selection. Therefore, it seems that properties of the life cycle of M. larici-populina, which entails both high genetic diversity and outbreeding, has facilitated its adaptation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Bat Smart Curtailment: Efficacy and Operational Testing

Curtailment, or blanket curtailment, is a leading method to mitigate the impacts to bats from operating wind turbines. Although this strategy results in considerable decreases in bat fatalities, it also results in decreased energy production. In 2019, Natural Power was awarded funding by the Department of Energy to assess the readiness of the informed smart curtailment technology, EchoSense (formerly referred to as Detection and Active Response Curtailment, [DARC]). The research undertaken by this project expands the understanding of alternative methods, known as smart curtailment, to maintain a reduction in bat fatalities while simultaneously recovering lost energy associated with blanket curtailment. The overall project was composed of three major tasks; Task 1 was focused on cybersecurity compliance of the EchoSense system in accordance with the North American Electric Reliability Corporation Critical Infrastructure Protection (“NERC CIP”) standards, Task 2 assessed the mechanical loads exerted on turbines when operating under a smart curtailment regime, and Task 3 assessed the efficacy of the EchoSense system at an operational wind farm. Regarding Task 1, an external review by the National Renewable Energy Laboratory determined that the EchoSense system did not create any new cybersecurity weaknesses and was compliant with the NERC CIP standards. As a result of this process, Natural Power developed some best practices (10.1) for wind- wildlife technology developers. In conjunction with the National Renewable Energy Laboratory, the results (10.2) of the loads testing demonstrated that the periodic curtailment and release of turbines by the EchoSense system did not have any detrimental impact on the mechanical components of a wind turbine (Task 2). During the late summer to fall of 2020 and 2021, Natural Power demonstrated that the use of the EchoSense smart curtailment system resulted in no significant difference in bat fatalities compared to blanket curtailment with cut-in speeds at 6.9 m/s (2020) and 5.0 m/s (2021) while resulting in a significant difference in decreased lost energy (Task 3). This translates to an average of 41% (2020) and 56% (2021) reduction in per turbine energy loss compared to blanket curtailment. The reduction in energy loss that would have been achieved by EchoSense curtailment compared to blanket curtailment, if applied across all 69 turbines, is roughly equivalent to having an additional turbine on site. These results are notable for finding a balance between the environmental impact of wind energy and the economic feasibility in energy production associated with mitigating that impact. https://www.naturalpower.com/us/expertise/service/engineering-operations/echosense

17 WIND ENERGY↗
DOE OSTI2023

Dependence of the kinetic energy absorption capacity of bistable mechanical metamaterials on impactor mass and velocity

Using an alternative mechanism to dissipation or scattering, bistable structures and mechanical metamaterials have shown promise for mitigating the detrimental effects of impact by reversibly locking energy into strained material. Herein, we extend prior works on impact absorption via bistable metamaterials to computationally explore the dependence of kinetic energy transmission on the velocity and mass of the impactor, with strain rates exceeding 10 2 s –1 . We observe a large dependence on both impactor parameters, ranging from significantly better to worse performance than a comparative linear material. We then correlate the variability in performance to solitary wave formation in the system and give analytical estimates of idealized energy absorption capacity under dynamic loading. In addition, we find a significant dependence on damping accompanied by a qualitative difference in solitary wave propagation within the system. The complex dynamics revealed in this study offer potential future guidance for the application of bistable metamaterials to applications including human and engineered system shock and impact protection devices.

42 ENGINEERING↗
DOE OSTI2020

2020 State of the Science Report, Chapter 2: Marine Renewable Energy: Environmental Effects and Monitoring Strategies

As we learn more about interactions between marine renewable energy (MRE) devices, the animals and habitats near them, and the oceanographic processes with which they interact, we need to clarify the language used to discuss those interactions. For example, if an MRE device or system negatively affected a number of animals, we could say that the device or the system of foundations, anchors, and mooring lines had an impact on the population, and take steps to avoid the impact or, in some cases, mitigate the impact. However, at this stage in MRE development, there are few, if any, cases in which a negative impact has been observed or measured. Instead, we are developing the building blocks that support investigations of interactions and potential impacts. https://tethys.pnnl.gov/publications/state-of-the-science-2020-chapter-2-environmental-effects

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2020

How Satellite Soil Moisture Data Can Help to Monitor the Impacts of Climate Change: SMAP Case Studies

Socially and economically costly extreme weather events have become more prevalent in the last decade. Monitoring and early warning systems could help mitigate the impact of such events by allowing people to better prepare themselves to manage their responses to these events. One significant element of an effective warning system is soil moisture because it is a key determinant of the exchange of water and heat energy between the land and atmosphere, the partitioning of precipitation between infiltration and runoff, and therefore has an influence on weather patterns and streamflow. In addition, soil moisture governs plant water availability – the key to crop yield forecasting. For these reasons, a wide range of organizations use soil moisture information to better predict and monitor climate and weather phenomena such as floods and droughts. By improving soil moisture estimates, it may be possible to improve the monitoring and early warning systems upon which these organizations rely, and hence better mitigate the impacts of extreme weather events. Through case studies, this article discusses several uses of soil moisture data products from NASA’s Soil Moisture Active Passive (SMAP) mission to help improve soil moisture-related monitoring and early warning systems.

Drought monitoring↗
NASA NTRS2020

How Satellite Soil Moisture Data Can Help to Monitor the Impacts of Climate Change: SMAP Case Studies

Socially and economically costly extreme weather events have become more prevalent in the last decade. Monitoring and early warning systems could help mitigate the impact of such events by allowing people to better prepare themselves to manage their responses to these events. One significant element of an effective warning system is soil moisture because it is a key determinant of the exchange of water and heat energy between the land and atmosphere, the partitioning of precipitation between infiltration and runoff, and therefore has an influence on weather patterns and streamflow. In addition, soil moisture governs plant water availability - the key to crop yield forecasting. For these reasons, a wide range of organizations use soil moisture information to better predict and monitor climate and weather phenomena such as floods and droughts. By improving soil moisture estimates, it may be possible to improve the monitoring and early warning systems upon which these organizations rely, and hence better mitigate the impacts of extreme weather events. Through case studies, this article discusses several uses of soil moisture data products from NASA's Soil Moisture Active Passive (SMAP) mission to help improve soil moisture-related monitoring and early warning systems.

agriculture↗
NASA NTRSDate not supplied

Anticipating Hazard Impacts through Capacity Building and Co-development

Improving forecast accuracy, extending lead time, understanding hazard susceptibility, and integrating exposure and vulnerability data to generate impact-based forecasts are critical in mitigating disaster impacts. These efforts enable anticipatory action through enhancing the efficacy of early warning systems to assess potential multi-dimensional hazard impacts. In response to this need, SERVIR has co-developed a series of hazard services providing vital information from national to regional scales. This poster showcases examples of geospatial services co-developed with partners through a capacity building approach, supporting the establishment of hazard early warning / early action systems. These services integrate multidimensional vulnerability and exposure data to comprehensively assess impacts. Furthermore, these services demonstrate how co-development and capacity building can advance the development of impact-based forecasts and multi-hazards services. By prioritizing collaboration, human insights, local knowledge, capacity building, and employing applied science approaches in geospatial service development, this work has helped create inclusive and customized solutions. These solutions are tailored to meet the needs of local communities and are readily adaptable into decision-making processes.

weather↗
DOE OSTI2020

A Strategy for Forced Oscillation Suppression

Wide-area time-synchronized measurements have recently revealed troublesome forced oscillations (FOs) within modern synchronized power grids. In some cases, these FOs represent a dangerous hazard to the system. Recent research has focused on locating the source of FOs to provide operators with knowledge for mitigating their impact locally. This paper presents a complementary mitigation strategy, which is to purposely induce a second oscillation into the grid which cancels the impact of the FO. Such a strategy is complementary in that it may provide valuable time to operators attempting to locate the FOs source and to determine how to rectify it. This paper presents a suppression control strategy which modulates controllable devices to automatically cancel the impact of the FO without the need for locating the source of the original FO. The strategy is based upon tuned feedback control. In this study, the approach is demonstrated on a simulation system via modulation of inverter-based generation.

42 ENGINEERING↗
NASA NTRS2011

Soft-Decision-Data Reshuffle to Mitigate Pulsed Radio Frequency Interference Impact on Low-Density-Parity-Check Code Performance

This presentation briefly discusses a research effort on mitigation techniques of pulsed radio frequency interference (RFI) on a Low-Density-Parity-Check (LDPC) code. This problem is of considerable interest in the context of providing reliable communications to the space vehicle which might suffer severe degradation due to pulsed RFI sources such as large radars. The LDPC code is one of modern forward-error-correction (FEC) codes which have the decoding performance to approach the Shannon Limit. The LDPC code studied here is the AR4JA (2048, 1024) code recommended by the Consultative Committee for Space Data Systems (CCSDS) and it has been chosen for some spacecraft design. Even though this code is designed as a powerful FEC code in the additive white Gaussian noise channel, simulation data and test results show that the performance of this LDPC decoder is severely degraded when exposed to the pulsed RFI specified in the spacecraft s transponder specifications. An analysis work (through modeling and simulation) has been conducted to evaluate the impact of the pulsed RFI and a few implemental techniques have been investigated to mitigate the pulsed RFI impact by reshuffling the soft-decision-data available at the input of the LDPC decoder. The simulation results show that the LDPC decoding performance of codeword error rate (CWER) under pulsed RFI can be improved up to four orders of magnitude through a simple soft-decision-data reshuffle scheme. This study reveals that an error floor of LDPC decoding performance appears around CWER=1E-4 when the proposed technique is applied to mitigate the pulsed RFI impact. The mechanism causing this error floor remains unknown, further investigation is necessary.

Ni, Jianjun David↗
NASA NTRS1980

The enviornmental assessment of a contemporary coal mining system

A contemporary underground coal mine in eastern Kentucky was assessed in order to determine potential off-site and on-site environmental impacts associated with the mining system in the given environmental setting. A 4 section, continuous room and pillor mine plan was developed for an appropriate site in eastern Kentucky. Potential environmental impacts were identified, and mitigation costs determined. The major potential environmental impacts were determined to be: acid water drainage from the mine and refuse site, uneven subsidence of the surface as a result of mining activity, and alteration of ground water aquifers in the subsidence zone. In the specific case examined, the costs of environmental impact mitigation to levels prescribed by regulations would not exceed $1/ton of coal mined, and post mining land values would not be affected.

Dutzi, E. J.↗
DOE OSTI2025

Design and Flow Considerations of Additively Manufactured, Internal Cooling Geometries for Small Industrial Gas Turbines

Additive manufacturing is now a mainstream technology and can be utilized to rapidly develop and test turbine airfoil cooling networks. This paper reports on an ongoing effort to integrate advanced internal cooling architectures in a realistic blade profile for test in a high-speed cascade. Airfoil cooling schemes were developed using reduced order modeling and computer aided design. However, the additive manufacturing impacts on cooling channel flow performance were unknown. Test articles consisting of typical cooling features and networks were derived from the designs and flow proved to identify additive manufacturing impacts on performance and develop guidelines to mitigate these impacts.

additive manufacturing↗
NASA NTRS2022

Mitigation Strategies for the Impact of Low Energy Laser Pulses in CALIOP Calibration and Level 2 Retrievals

Since mid-2016, the frequency of low energy laser pulses emitted by the CALIPSO lidar has been slowly increasing due to pressure losses in the canister housing the laser. While originally confined primarily to the South Atlantic Anomaly (SAA) region, these low energy pulses now occur intermittently around the globe. Low energy pulses can cause calibration biases and degrade the science quality of level 2 retrievals. We describe a new low energy mitigation (LEM) algorithm that will be implemented incrementally in future versions of the CALIOP data processing to identify and reject affected profiles during calibration and feature detection. The LEM algorithm effectively eliminates low energy calibration biases, improves level 2 retrievals, and minimizes level 2 data loss.

Jason Tackett↗
DOE OSTI2020

Designing an Epitaxially-Integrated DBR for Dislocation Mitigation in Monolithic GaAsP/Si Tandem Solar Cells

This work explores epitaxially-integrated distributed Bragg reflectors (DBR) as a strategy to mitigate the impact of threading dislocations on the performance of monolithic GaAs 0.75 P 0.25 /Si tandem solar cells. The constraints present due to materials availability and the optical transmission profile of the GaAs 0.75 P 0.25 top cell require the use of an enhanced bandwidth DBR design achieved by combining two narrow-band DBR’s with different central wavelengths. Here, the impact of this DBR structure on JSC, along with the competing effects of threading dislocation density (TDD), are investigated using a robust, experimentally informed analytical model. Implementing this DBR within the GaAs 0.75 P 0.25 /Si tandem cell structure is predicted to yield a short circuit current enhancement equivalent to an ~1.8× reduction in TDD, providing a clear demonstration of its promise as a design methodology for mitigating the impact of non-negligible defect populations.

14 SOLAR ENERGY↗
DOE OSTI2021

Cybersecurity of Wide Area Monitoring, Protection and Control Systems for HVDC Applications

The flexibility provided by High Voltage Direct Current (HVDC) systems can be further extended by Wide Area Monitoring, Protection, and Control (WAMAPC) systems. WAMPAC systems enable many HVDC applications and, on the other hand, inevitably introduce cybersecurity concerns that need to be addressed. In this work, a security domain layer and decision framework is reported to detect and mitigate the impact of false data injection (FDI) attacks targeting HVDC stations. Specifically, a rule-based cyber-attack detection method is introduced and implemented on Raspberry Pi and tested on the real-time HVDC simulation facility on the real-time digital simulator (RTDS) platform at ABB U.S. Corporate Research Center.

cybersecurity↗