Search NASA⌕ Search

SEARCH · Search NASA

Results for “Initial conditions problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Unsteady flow computation of oscillating flexible wings

The problem of unsteady flow around flexible wings is solved using the unsteady, compressible, thin-layer Navier-Stokes equations in conjunction with the unsteady, linearized, Navier-displacement equations. Starting with the initial shape of the wing, the Navier-Stokes equations are solved on an initial structured grid to obtain the steady-flow solution which is used for the initial conditions. The forced deformation motion of the wing boundaries is then applied, and the problem is solved accurately in time. During the time-accurate stepping, the Navier-displacement equations are used to solve for the grid deformation and sequently, the Navier-Stokes equations are used to solve for the flowfield. Two applications are presented; the first is for a pulsating oscillation of a bending-mode airfoil in transonic flow, and the second is for a bending-mode oscillation of a sharp-edged delta wing in supersonic flow.

Kandil, Osama A.↗

Influence of exit impedance on finite difference solutions of transient acoustic mode propagation in ducts

The cutoff mode instability problem associated with a transient finite difference solution to the wave equation is explained. The steady-state impedance boundary condition is found to produce acoustic reflections during the initial transient, which cause finite instabilities in the cutoff modes. The stability problem is resolved by extending the duct length to prevent transient reflections. Numerical calculations are presented at forcing frequencies above, below, and nearly at the cutoff frequency, and exit impedance models are presented for use in the practical design of turbofan inlets.

Baumeister, K. J.↗

Regional Model Nesting Within GFS Daily Forecasts Over West Africa

The study uses the RM3, the regional climate model at the Center for Climate Systems Research of Columbia University and the NASA/Goddard Institute for Space Studies (CCSR/GISS). The paper evaluates 30 48-hour RM3 weather forecasts over West Africa during September 2006 made on a 0.5 grid nested within 1 Global Forecast System (GFS) global forecasts. September 2006 was the Special Observing Period #3 of the African Monsoon Multidisciplinary Analysis (AMMA). Archived GFS initial conditions and lateral boundary conditions for the simulations from the US National Weather Service, National Oceanographic and Atmospheric Administration were interpolated four times daily. Results for precipitation forecasts are validated against Tropical Rainfall Measurement Mission (TRMM) satellite estimates and data from the Famine Early Warning System (FEWS), which includes rain gauge measurements, and forecasts of circulation are compared to reanalysis 2. Performance statistics for the precipitation forecasts include bias, root-mean-square errors and spatial correlation coefficients. The nested regional model forecasts are compared to GFS forecasts to gauge whether nesting provides additional realistic information. They are also compared to RM3 simulations driven by reanalysis 2, representing high potential skill forecasts, to gauge the sensitivity of results to lateral boundary conditions. Nested RM3/GFS forecasts generate excessive moisture advection toward West Africa, which in turn causes prodigious amounts of model precipitation. This problem is corrected by empirical adjustments in the preparation of lateral boundary conditions and initial conditions. The resulting modified simulations improve on the GFS precipitation forecasts, achieving time-space correlations with TRMM of 0.77 on the first day and 0.63 on the second day. One realtime RM3/GFS precipitation forecast made at and posted by the African Centre of Meteorological Application for Development (ACMAD) in Niamey, Niger is shown.

Druyan, Leonard M.↗

Experiments on initial and boundary conditions

Effects of three different models for the treatment of subsonic boundary conditions, applied to the problem of flow in a channel with a bump, are discussed. A preliminary discussion of the numerical treatment of the corners is presented.

Moretti, G.↗

Near-optimal output feedback regulation of ill-conditioned linear systems

A two-time scale approximation for the linear quadratic optimal output feedback regulator program is examined. Necessary conditions for optimality, as well as an algorithm for computing locally near-optimal gains are derived. If it is assumed that the slow and fast subsystem initial conditions are uniformly distributed, optimal gains for the two-time-scale problem provide a second-order approximation to optimal closed-loop performance in the unperturbed system. This is verified with a numerical example.

Moerder, Daniel D.↗

Response-coefficient method for heat-conduction transients with time-dependent inputs

A theoretical overview of the response coefficient method for heat conduction transients with time-dependent input forcing functions is presented with a number of illustrative applications. The method may be the most convenient and economical if the same problem is to be solved many times with different input-time histories or if the solution time is relatively long. The method is applicable to a wide variety of problems, including irregular geometries, position-dependent boundary conditions, position-dependent physical properties, and nonperiodic irregular input histories. Nonuniform internal energy generation rates within the structure can also be handled by the method. The area of interest is long-time solutions, in which initial condition is unimportant, and not the early transient period. The method can be applied to one dimensional problems in cartesian, cylindrical, and spherical coordinates as well as to two dimensional problems in cartesian and cylindrical coordinates.

Ceylan, Tamer↗

Preliminary Design of Low-Thrust Interplanetary Missions

For interplanetary missions, highly efficient electric propulsion systems can be used to increase the mass delivered to the destination and/or reduce the trip time over typical chemical propulsion systems. This technology is being demonstrated on the Deep Space 1 mission - part of NASA's New Millennium Program validating technologies which can lower the cost and risk and enhance the performance of future missions. With the successful demonstration on Deep Space 1, future missions can consider electric propulsion as a viable propulsion option. Electric propulsion systems, while highly efficient, produce only a small amount of thrust. As a result, the engines operate during a significant fraction of the trajectory. This characteristic makes it much more difficult to find optimal trajectories. The methods for optimizing low-thrust trajectories are typically categorized as either indirect, or direct. Indirect methods are based on calculus of variations, resulting in a two-point boundary value problem that is solved by satisfying terminal constraints and targeting conditions. These methods are subject to extreme sensitivity to the initial guess of the variables - some of which are not physically intuitive. Adding a gravity assist to the trajectory compounds the sensitivity. Direct methods parameterize the problem and use nonlinear programming techniques to optimize an objective function by adjusting a set of variables. A variety of methods of this type have been examined with varying results. These methods are subject to the limitations of the nonlinear programming techniques. In this paper we present a direct method intended to be used primarily for preliminary design of low-thrust interplanetary trajectories, including those with multiple gravity assists. Preliminary design implies a willingness to accept limited accuracy to achieve an efficient algorithm that executes quickly.

Sims, Jon A.↗

Navier-Stokes simulation of the crossflow instability in swept-wing flows

The computational modeling of the transition process characteristic of flows over swept wings are described. Specifically, the crossflow instability and crossflow/T-S wave interactions are analyzed through the numerical solution of the full three-dimensional Navier-Stokes equations including unsteadiness, curvature, and sweep. This approach is chosen because of the complexity of the problem and because it appears that linear stability theory is insufficient to explain the discrepancies between different experiments and between theory and experiments. The leading edge region of a swept wing is considered in a three-dimensional spatial simulation with random disturbances as the initial conditions. The work has been closely coordinated with the experimental program of Professor William Saric, examining the same problem. Comparisons with NASA flight test data and the experiments at Arizona State University were a necessary and an important integral part of this work.

Reed, Helen L.↗

Optimum horizontal guidance techniques for aircraft

Some problems of automatic guidance of an aircraft in the horizontal plane are described. The horizontal guidance tasks, which such a flight control system should be capable of performing, were identified as being of three types: guiding the aircraft from any initial location and initial heading to (1) any final location and heading; (2) intercept and fly along a line of specified direction; and (3) a final location with arbitrary final heading. Guidance problems such as capturing an ILS beam at a specified point on the beam, intercepting a VOR radial, and point-to-point navigation can be formulated in terms of these problems. The guidance laws minimize the arc distance to fly between initial and final conditions subject to constraints on the minimum turning radius.

Erzberger, H.↗

Time-Domain Impedance Boundary Conditions for Computational Aeroacoustics

It is an accepted practice in aeroacoustics to characterize the properties of an acoustically treated surface by a quantity known as impedance. Impedance is a complex quantity. As such, it is designed primarily for frequency-domain analysis. Time-domain boundary conditions that are the equivalent of the frequency-domain impedance boundary condition are proposed. Both single frequency and model broadband time-domain impedance boundary conditions are provided. It is shown that the proposed boundary conditions, together with the linearized Euler equations, form well-posed initial boundary value problems. Unlike ill-posed problems, they are free from spurious instabilities that would render time-marching computational solutions impossible.

Tam, Christopher K. W.↗

Undecidability in macroeconomics

In this paper we study the difficulty of solving problems in economics. For this purpose, we adopt the notion of undecidability from recursion theory. We show that certain problems in economics are undecidable, i.e., cannot be solved by a Turing Machine, a device that is at least as powerful as any computational device that can be constructed. In particular, we prove that even in finite closed economies subject to a variable initial condition, in which a social planner knows the behavior of every agent in the economy, certain important social planning problems are undecidable. Thus, it may be impossible to make effective policy decisions. Philosophically, this result formally brings into question the Rational Expectations Hypothesis which assumes that each agent is able to determine what it should do if it wishes to maximize its utility. We show that even when an optimal rational forecast exists for each agency (based on the information currently available to it), agents may lack the ability to make these forecasts. For example, Lucas describes economic models as 'mechanical, artificial world(s), populated by ... interacting robots'. Since any mechanical robot can be at most as computationally powerful as a Turing Machine, such economies are vulnerable to the phenomenon of undecidability.

Chandra, Siddharth↗

Theory of satellite structures on spectral-line profiles.

A systematic comparison with experiment of various explanations for the problem of satellite-band formation on spectral-line profiles was initiated. The experiments were performed under a variety of conditions in an effort to construct a consistent model of entire line shapes. A composite theory is detailed which is the result of the insights of many individuals. The calculations indicate that the main features of the problem, the line, the high-intensity red satellites, and the blue satellite can be described simultaneously. The results also indicate that widely different potentials can lead to very similar line profiles. Ancillary conclusions are presented concerning the role of Lennard-Jones potentials in line-shape calculations.

Atakan, A. K.↗

A supersonic, three-dimensional code for flow over blunt bodies: User's manual

A computer code is described which may be used to calculate the steady, supersonic, three-dimensional, inviscid flow over blunt bodies. The theoretical and numerical formulation of the problem is given (shock-capturing, downstream marching), including exposition of the boundary and initial conditions. The overall flow logic of the program, its usage, accuracy, and limitations are discussed.

Chaussee, D. S.↗

Straightening of a wavy strip: An elastic-plastic contact problem including snap-through

The nonlinear behavior of a wave like deformed metal strip during the levelling process were calculated. Elastic-plastic material behavior as well as nonlinearities due to large deformations were considered. The considered problem lead to a combined stability and contact problem. It is shown that, despite the initially concentrated loading, neglecting the change of loading conditions due to altered contact domains may lead to a significant error in the evaluation of the nonlinear behavior and particularly to an underestimation of the stability limit load. The stability was examined by considering the load deflection path and the behavior of a load-dependent current stiffness parameter in combination with the determinant of the current stiffness matrix.

Fischer, D. F.↗

Optimal landing of a helicopter in autorotation

Gliding descent in autorotation is a maneuver used by helicopter pilots in case of engine failure. The landing of a helicopter in autorotation is formulated as a nonlinear optimal control problem. The OH-58A helicopter was used. Helicopter vertical and horizontal velocities, vertical and horizontal displacement, and the rotor angle speed were modeled. An empirical approximation for the induced veloctiy in the vortex-ring state were provided. The cost function of the optimal control problem is a weighted sum of the squared horizontal and vertical components of the helicopter velocity at touchdown. Optimal trajectories are calculated for entry conditions well within the horizontal-vertical restriction curve, with the helicopter initially in hover or forwared flight. The resultant two-point boundary value problem with path equality constraints was successfully solved using the Sequential Gradient Restoration Technique.

Lee, A. Y. N.↗

Three-dimensional magnetohydrodynamic turbulence in cylindrical geometry

A theory is developed in which a perfectly conducting cylindrical wall is used to describe incompressible MHD turbulence. Dynamic equations of incompressible MHD and its associated fields are expanded in a system of vector eigenfunctions of the curl. The total energy, magnetic helicity, and cross helicity have simple quadratic expressions in the expansion coefficients. The invariants are temporally constant for a truncation at a large, but finite, number of coefficients. The invariants are used to construct canonical distributions. It is noted that for all initial conditions, including quiescent ones, the mean-square velocity fields have finite values. The stability problem is transformed into a search for values of the integral variants which minimize the mean-square velocity fields. This leads to an extremal helicity principle.

Montgomery, D.↗

Long-time asymptotics of a system for plasma diffusion

A system of parabolic nonlinear equations that describe the diffusion of a fully collisional plasma across a strong magnetic field is discussed. It is demonstrated that the solution to this system tends to a time asymptotic state which is of space-time separable form, theta(t)f(x). Furthermore, f(x) is independent of the initial conditions and theta(t) depends slightly on the initial conditions. The rate of decay of the temporal part is governed by a nonlinear eigenvalue problem. Since the equations are considered in a bounded domain we are able to analyze the effect of boundary conditions on the evolution of the system. Additional effects on radiation, heating, and particle injection can also be accounted for. Essential differences between the behavior of a fully-coupled system and a scalar equation are observed.

Rosenau, P.↗

Evolution of the Orszag-Tang vortex system in a compressible medium. II - Supersonic flow

A study is presented on the effect of embedded supersonic flows and the resulting emerging shock waves on phenomena associated with MHD turbulence, including reconnection, the formation of current sheets and vortex structures, and the evolution of spatial and temporal correlations among physical variables. A two-dimensional model problem, the Orszag-Tang (1979) vortex system, is chosen, which involves decay from nonrandom initial conditions. The system is doubly periodic, and the initial conditions consist of single-mode solenoidal velocity and magnetic fields, each containing X points and O points. The initial mass density is flat, and the initial pressure fluctuations are incompressible, balancing the local forces for a magnetofluid of unit mass density. Results on the evolution of the local structure of the flow field, the global properties of the system, and spectral correlations are presented. The important dynamical properties and observational consequences of embedded supersonic regions and emerging shocks in the Orszag-Tang model of an MHD system undergoing reconnection are discussed. Conclusions are drawn regarding the effects of local supersonic regions on MHD turbulence.

Picone, J. Michael↗