Search NASA⌕ Search

SEARCH · Search NASA

Results for “Internet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Seamless Wireless Communication Platform for Internet of Things Applications

The rapid growth of the Internet of Things (IoT) devices resulted in the proliferation of wireless technologies to cater to their increasing data rate requirements and support multiple applications. However, such ever-increasing wireless technologies present numerous challenges such as incompatible wireless standards, increased energy consumption, and insecure communication. The traditional gateways proposed in the literature suffers from limitations such as computational complexity, resource requirements, increased cost, and device size. We vision an era of seamless wireless communication to alleviate the aforementioned challenges in IoT applications. through three inter-dependent functionalities namely detection and identification of wireless technologies, energy-efficient transmit power control, and secure end-to-end communication. To prove the concept, a new gateway is proposed to achieve these three functionalities with only physical layer measurements so that the different communication protocols in the higher layers can be avoided. Novel schemes are conceptualized for resource-limited seamless IoT applications. Moreover, the conceptual seamless IoT platform is validated through software-based computer simulation and software-defined radio-based testbed implementation. Finally, the preliminary analysis demonstrates that the proposed platform has great potential in advancing seamless IoT applications.

97 MATHEMATICS AND COMPUTING↗

DaMoScope and its internet graphics for the visual control of adjusting mathematical models describing experimental data

The experience of using the dynamic atlas of the experimental data and mathematical models of their description in the problems of adjusting parametric models of observable values depending on kinematic variables is presented. The functional possibilities of an image of a large number of experimental data and the models describing them are shown by examples of data and models of observable values determined by the amplitudes of elastic scattering of hadrons. The Internet implementation of an interactive tool DaMoScope and its interface with the experimental data and codes of adjusted parametric models with the parameters of the best description of data are schematically shown. The DaMoScope codes are freely available.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Internet of Things (IoT) Products and Applications: Lighting - Manufacturer and End-User Perspectives

It is forecast that the Internet of Things (IoT) market will experience significant growth in the coming years, with many expecting compound annual growth rates generally in the mid-20% (Forbes 2017). For lighting manufacturers, this is a tremendous opportunity to revolutionize their products to address the dwindling sales of lamps, once a major revenue stream, and bring new capabilities and services to their customers through luminaires and other lighting system components. For end-users, lighting products of the future may do more than simply provide light, with a cadre of connected sensors and controls that may help them do everything from exploring energy saving opportunities in other building systems to data-mining occupancy data to optimize use of space or increase sales. The focus of this study is to evaluate where the lighting market is today with respect to integrating IoT into its product offerings and end-user experiences with IoT, and in particular with IoT incorporated into lighting systems. The benefits, in terms of energy savings, of encouraging the adoption of connected lighting systems beyond the current solid state lighting (SSL) path to more aggressive DOE SSL Program Goals can result in an additional 33-percent of the LED energy savings, or 1.4 Quads, in 2035 (Navigant 2016).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Edge of Exploration: An Edge Storage and Computing Framework for Ambient Noise Seismic Interferometry Using Internet of Things Based Sensor Networks

Recent technological advances have reduced the complexity and cost of developing sensor networks for remote environmental monitoring. However, the challenges of acquiring, transmitting, storing, and processing remote environmental data remain significant. The transmission of large volumes of sensor data to a centralized location (i.e., the cloud) burdens network resources, introduces latency and jitter, and can ultimately impact user experience. Edge computing has emerged as a paradigm in which substantial storage and computing resources are located at the “edge” of the network. In this paper, we present an edge storage and computing framework leveraging commercially available components organized in a tiered architecture and arranged in a hub-and-spoke topology. The framework includes a popular distributed database to support the acquisition, transmission, storage, and processing of Internet-of-Things-based sensor network data in a field setting. We present details regarding the architecture, distributed database, embedded systems, and topology used to implement an edge-based solution. Lastly, a real-world case study (i.e., seismic) is presented that leverages the edge storage and computing framework to acquire, transmit, store, and process millions of samples of data per hour.

58 GEOSCIENCES↗

Internet-based transfer of cardiac ultrasound images

A drawback to large-scale multicentre studies is the time required for the centralized evaluation of diagnostic images. We evaluated the feasibility of digital transfer of echocardiographic images to a central laboratory for rapid and accurate interpretation. Ten patients undergoing trans-oesophageal echocardiographic scanning at three sites had representative single images and multiframe loops stored digitally. The images were analysed in the ordinary way. All images were then transferred via the Internet to a central laboratory and reanalysed by a different observer. The file sizes were 1.5-72 MByte and the transfer rates achieved were 0.6-4.8 Mbit/min. Quantitative measurements were similar between most on-site and central laboratory measurements (all P > 0.25), although measurements differed for left atrial width and pulmonary venous systolic velocities (both P < 0.05). Digital transfer of echocardiographic images and data to a central laboratory may be useful for multicentre trials.

NASA Discipline Cardiopulmonary↗

Towards an interplanetary internet: a proposed strategy for standardization

This paper reviews the current set of standard data communications capabilities that exist to support advanced missions, discusses the architectural concepts for the future Interplanetary Internet, and suggests how a standardized set of space communications protocols that can grow to support future scenarios where human intelligence is widely distributed across the Solar System.

interplanetary internet space communications proto↗

The interplanetary Internet

Architectural design of the interplanetary internet is now underway and prototype flight testing of some of the candidate protocols is anticipated within a year. This talk will describe the current status of the project.

Internet space communications↗

The Lighter Side of Things: The Inevitable Convergence of the Internet of Things and Cybersecurity

By the year 2020 it is estimated that there will be more than 50 billion devices connected to the Internet. These devices not only include traditional electronics such as smartphones and other mobile compute devices, but also eEnabled technologies such as cars, airplanes and smartgrids. The IoT brings with it the promise of efficiency, greater remote management of industrial processes and further opens the doors to world of vehicle autonomy. However, IoT enabled technology will have to operate and contend in the contested domain of cyberspace. This discussion will touch on the impact that cybersecurity has on IoT and the people, processes and technology required to mitigate cyber risks.

Internet of Things↗

How the Internet of "Space" Things will Disrupt and Transform Astronaut Work-life

Future long duration exploration missions will require astronauts to work and behave more autonomously. Over the last several years, we have been investigating how integrating sensors into an astronaut’s environment enables crew autonomy. This paper describes the prototypes we have deployed in Earth analogs investigating the concept of the Internet of “Space” Things.

procedure execution↗

Integrated Triboelectric Nanogenerators in the Era of the Internet of Things

Abstract Since their debut in 2012, triboelectric nanogenerators (TENGs) have attained high performance in terms of both energy density and instantaneous conversion, reaching up to 500 W m −2 and 85%, respectively, synchronous with multiple energy sources and hybridized designs. Here, a comprehensive review of the design guidelines of TENGs, their performance, and their designs in the context of Internet of Things (IoT) applications is presented. The development stages of TENGs in large‐scale self‐powered systems and technological applications enabled by harvesting energy from water waves or wind energy sources are also reviewed. This self‐powered capability is essential considering that IoT applications should be capable of operation anywhere and anytime, supported by a network of energy harvesting systems in arbitrary environments. In addition, this review paper investigates the development of self‐charging power units (SCPUs), which can be realized by pairing TENGs with energy storage devices, such as batteries and capacitors. Consequently, different designs of power management circuits, supercapacitors, and batteries that can be integrated with TENG devices are also reviewed. Finally, the significant factors that need to be addressed when designing and optimizing TENG‐based systems for energy harvesting and self‐powered sensing applications are discussed.

Chemistry↗

Progress and Perspective: Soft Thermoelectric Materials for Wearable and Internet‐of‐Things Applications

Abstract Soft thermoelectric materials, including conjugated polymers and organic–inorganic hybrids, now demonstrate figures of merit approaching those of inorganic materials. These materials development breakthroughs enable the design of thermoelectric devices that exhibit appropriate efficiencies for commercial use, while simultaneously leveraging the unique processing and mechanical advantages of soft materials. Such a technology opens the door to a suite of new thermoelectric applications, including power generation for biomedical implants and the Internet of Things, or wearable heating and cooling devices. In order to realize deployment of such technologies, there is a fundamental need for deeper understanding of the complex transport physics underlying thermoelectric transport in soft materials. Here, the current state of the art in soft thermoelectrics materials is discussed, and outstanding challenges specific to organic and organic–inorganic hybrid systems are highlighted.

Zaia, Edmond W.↗