Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ion temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Self-generated magnetic fields in the hot spot of direct-drive cryogenic implosions at Omega

This work reports that Biermann self-generated magnetic fields of ≈200 MG and Hall parameters of ≈1.5 are produced in the stagnation phase of direct-drive cryogenic implosions at Omega. The magnetic fields produce a drop of 2.4% in fusion yield and 1% in ion temperature. A quantitative estimate of the effect of self-generated magnetic fields on yield and ion temperature is essential, since direct measurements of these fields are not available. Reconstructed simulations of the 50 Gbar implosions, with all the stagnation measurements reproduced simultaneously by a combination of mid- and low-mode asymmetries as degradation mechanisms [Bose et al., Phys. Plasmas 25, 062701 (2018)], are used to obtain the estimates. The magnetic fields cause a decrease in yield due to the Righi–Leduc heat flow, which exceeds any benefits from heat flow suppression due to magnetization. It is important to note that both direct-drive Omega-scale implosions and indirect-drive National Ignition Facility (NIF)-scale implosions [Walsh et al., Phys. Rev. Lett. 118, 155001 (2017)] produce similar estimates for the magnetic field strength, and both show a decrease in fusion yield, with the Righi–Leduc transport as the loss mechanism. However, the yield degradation at Omega is small and lower by ≈5× compared to the indirect-drive ignition-scale NIF estimate.

Physics↗
DOE OSTI2022

Linear ion-scale microstability analysis of high and low-collisionality NSTX discharges and NSTX-U projections

Linear gyrokinetic simulations were conducted to investigate ion-gyroradius-scale micro-instability predictions for high-beta NSTX discharges and NSTX-U projections that span over an order of magnitude variation in collisionality. A complex mix of microtearing modes and hybrid trapped electron modes/kinetic ballooning modes (TEM/KBM) is predicted for all experimental or projected conditions. Ion temperature gradient (ITG) instabilities are typically stable in the NSTX discharges investigated, consistent with the observed neoclassical ion thermal transport. ITG thresholds inferred from the simulations are typically much higher than the experimental NSTX gradients, as well as the projected gradients in the NSTX-U scenario, which assumed ion temperatures limited by neoclassical transport only. The analysis suggests ITG instabilities are unlikely to contribute significant anomalous thermal losses in high-beta, lower collisionality NSTX-U scenarios. On the other hand, the NSTX experimental profiles and NSTX-U projections are predicted to be very close to the predicted onset of unstable KBM at most radii investigated. The proximity of the various discharges to the KBM instability threshold implies it may play an important role in setting profile shapes and limiting global energy confinement. Here, it remains to be understood and predicted how KBM contributes to multi-channel transport (thermal and particle transport, for both ions and electrons) in a way that is consistent with experimental inferences.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predictive modeling of NSTX discharges with the updated multi-mode anomalous transport module

Abstract The objective of this study is twofold: firstly, to demonstrate the consistency between the anomalous transport results produced by updated Multi-Mode Model (MMM) version 9.0.4 and those obtained through gyrokinetic simulations; and secondly, to showcase MMM’s ability to predict electron and ion temperature profiles in low aspect ratio, high beta NSTX discharges. MMM encompasses a range of transport mechanisms driven by electron and ion temperature gradients, trapped electrons, kinetic ballooning, peeling, microtearing, and drift resistive inertial ballooning modes. These modes within MMM are being verified through corresponding gyrokinetic results. The modes that potentially contribute to ion thermal transport are stable in MMM, aligning with both experimental data and findings from linear CGYRO simulations. The isotope effects on these modes are also studied and higher mass is found to be stabilizing, consistent with the experimental trend. The electron thermal power across the flux surface is computed within MMM and compared to experimental measurements and nonlinear CGYRO simulation results. Specifically, the electron temperature gradient modes (ETGM) within MMM account for 2.0 MW of thermal power, consistent with experimental findings. It is noteworthy that the ETGM model requires approximately 5.0 ms of computation time on a standard desktop, while nonlinear CGYRO simulations necessitate 8.0 h on 8 K cores. MMM proves to be highly computationally efficient, a crucial attribute for various applications, including real-time control, tokamak scenario optimization, and uncertainty quantification of experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Portable diagnostic package for Thomson scattering and optical emission spectroscopy on Princeton field-reversed configuration 2 (PFRC 2)

An Advanced Research Projects Agency-Energy funded diagnostic system has been deployed to the Princeton field-reversed configuration 2 (PFRC-2) device, located at Princeton Plasma Physics Laboratory. The Portable Diagnostic Package (PDP), designed at Oak Ridge National Laboratory, allows for the measurement of Thomson Scattering (TS) for electron density and temperature and Optical Emission Spectroscopy (OES) for ion temperature, impurity density, and ion velocity. A tunable spectrometer on the PDP with three gratings provides the flexibility to measure low (1 eV) and high (1000 eV) electron temperature ranges from TS. Additionally, using a second spectrometer, the OES diagnostic can survey light emission from various ion excitation levels for wide wavelength ranges. The electron density (<2 × 10 19 m –3 ) of plasmas generated in PFRC-2 has been below the PDP TS discrimination threshold, which has made TS signal detection challenging against a high-background of laser stray light. The laser stray light was iteratively reduced by making modifications to the entrance and exit geometry on PFRC-2. Rayleigh scattering experiments on PFRC have yielded the TS discrimination sensitivity to be >1 × 10 20 m –3 for the PDP. A recently implemented narrow-band notch spectral filter that masks the second harmonic 532 nm Nd:YAG laser wavelength has increased the system’s TS light discrimination sensitivity 65 times compared to the instance when the notch filter was not implemented. The hardware implementation including design changes to the flight tubes and Brewster windows will be discussed, along with results from Rayleigh and rotational Raman scattering sensitivity analyses, which were used to establish a quantitative figure of merit on the system performance. Further, the Raman scattering calibration with the notch filter has improved the PDP electron density threshold to 1 ± 0.5 × 10 18 m –3 .

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Liquid-type room-temperature fluoride ion batteries

The present disclosure relates to fluoride ion batteries and structures of metal based electrode materials for various fluoride ion batteries. The structures of the metal based electrode materials comprise one or more shells or interfaces, enabling the electrodes to operate at room temperature with a liquid electrolyte.

Xu, Qingmin↗
DOE OSTI2024

Performance prediction applying different reduced turbulence models to the SMART tokamak

The SMall Aspect Ratio Tokamak (SMART) is currently being commissioned at the University of Seville and will be able to compare the performance of positive and negative triangularity plasmas at low aspect ratio. Predictive simulations have been performed for different machine scenarios and heating schemes using the TRANSP code. The objectives of these simulations are to predict the parameters expected in positive triangularity plasmas, to guide diagnostic development, and to validate transport models. Several reduced turbulence models have been used to predict electron and ion temperatures for the operational phase 2. All models provide similar results from approximately mid-radius to the separatrix but important discrepancies are found in the core region. These positive triangularity results are compared with experiments from a similar size machine like GLOBUS-M2. The multi-mode model (MMM) shows the best agreement. Simulations with different boundary conditions have been performed and no strong differences have been observed between them. The impact of neutral beam injection (NBI) on the predicted profiles has also been addressed. Rotation reduces turbulence levels so higher temperatures are achieved when included in the simulations. Studying the different contributions to the thermal diffusivities, it is observed that electron temperature gradient (ETG) turbulence dominates at the plasma core while micro-tearing modes (MTM) dominate at the edge in the electron channel. In the ion channel, the neoclassical contribution is dominant at the core and at the very edge while the Weiland component, which includes ion temperature gradient mode (ITG), trapped electron mode (TEM), kinetic ballooning mode (KBM), peeling mode (PM) and collisionless and collision dominated magnetohydrodynamic (MHD) modes governs the mid-radius region. For phase 3, two plasmas with different electron densities have been studied. The case with lower density matches well a specific discharge of GLOBUS-M2. The higher density plasma shows high performance with β N ≈ 3.8.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

The integrated miniaturized electrostatic analyzer: A space plasma environment sensor

The integrated Miniaturized Electrostatic Analyzer (iMESA) was a satellite-based ionospheric sensor that operated on NASA’s Space Test Program Satellite (STPSat-3) from December 2013 to July 2019. The instrument’s scientific objective was to (1) measure the plasma density in low Earth orbit, (2) measure the plasma temperature in low Earth orbit, and (3) quantify the spacecraft potential with respect to the ambient plasma potential in the ionosphere. iMESA sampled the ionosphere every 10 s by measuring the ion current density through the ESA as a result of the motion of the spacecraft through the plasma. Current density spectra were transmitted to the ground where they were post-processed into ion density spectra and then analyzed numerically to determine the ion density, ion temperature, and spacecraft potential. This article discusses the instrument design and simulation, the determination of a geometric factor, and data processing procedures and evaluates the final data product with regard to the mission success criteria. Here, the ion density and ion temperature captured by the iMESA instrument are on the same order and range as the values predicted in the literature. The spacecraft potential was also quantified. The conclusion after the evaluation of the instrument’s data product is that the scientific mission is successful on all three points.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Nonlinear burn control in ITER using adaptive allocation of actuators with uncertain dynamics

Abstract ITER will be the first tokamak to sustain a fusion-producing, or burning, plasma. If the plasma temperature were to inadvertently rise in this burning regime, the positive correlation between temperature and the fusion reaction rate would establish a destabilizing positive feedback loop. Careful regulation of the plasma’s temperature and density, or burn control, is required to prevent these potentially reactor-damaging thermal excursions, neutralize disturbances and improve performance. In this work, a Lyapunov-based burn controller is designed using a full zero-dimensional nonlinear model. An adaptive estimator manages destabilizing uncertainties in the plasma confinement properties and the particle recycling conditions (caused by plasma–wall interactions). The controller regulates the plasma density with requests for deuterium and tritium particle injections. In ITER-like plasmas, the fusion-born alpha particles will primarily heat the plasma electrons, resulting in different electron and ion temperatures in the core. By considering separate response models for the electron and ion energies, the proposed controller can independently regulate the electron and ion temperatures by requesting that different amounts of auxiliary power be delivered to the electrons and ions. These two commands for a specific control effort (electron and ion heating) are sent to an actuator allocation module that optimally maps them to the heating actuators available to ITER: an electron cyclotron heating system (20 MW), an ion cyclotron heating system (20 MW), and two neutral beam injectors (16.5 MW each). Two different actuator allocators are presented in this work. The first actuator allocator finds the optimal mapping by solving a convex quadratic program that includes actuator saturation and rate limits. It is nonadaptive and assumes that the mapping between the commanded control efforts and the allocated actuators (i.e. the effector model) contains no uncertainties. The second actuator allocation module has an adaptive estimator to handle uncertainties in the effector model. This uncertainty includes actuator efficiencies, the fractions of neutral beam heating that are deposited into the plasma electrons and ions, and the tritium concentration of the fueling pellets. Furthermore, the adaptive allocator considers actuator dynamics (actuation lag) that contain uncertainty. This adaptive allocation algorithm is more computationally efficient than the aforementioned nonadaptive allocator because it is computed using dynamic update laws so that finding the solution to a static optimization problem is not required at every time step. A simulation study assesses the performance of the proposed adaptive burn controller augmented with each of the actuator allocation modules.

Physics↗
DOE OSTI2023

Ion cyclotron heating at high plasma density in Proto-MPEX

The physics of ion cyclotron heating (ICH) relevant to the steady-state linear machine MPEX (Material Plasma Exposure eXperiment) has been explored in its predecessor, short-pulse device: Proto-MPEX. MPEX will utilize fundamental ICH to increase heat flux at the target and produce ion temperatures and velocity distributions with improved fidelity to those found in a tokamak divertor region, in comparison to those produced by substrate biasing. In the experiments on Proto-MPEX described here, bulk ion temperatures up to ~15 eV have been achieved with 20 kW net ICH power at 6.5 MHz, using ICH heating of a deuterium plasma produced by a helicon plasma source. The heat flux at the target has been observed to increase throughout the plasma cross section, including in the core region. Core $T_i$ and target heat flux are observed to scale linearly with injected ICH power. Further, measurements of plasma loading and target heat flux as a function of the magnetic field strength at the antenna, together with modeling of the wave propagation from the antenna to the ion cyclotron resonance using the ANTENA and COMSOL codes with a warm plasma dielectric tensor, indicate that power is coupled to the core plasma via fast wave excitation of a kinetic Alfvén wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Phased plan for the implementation of the time-resolving magnetic recoil spectrometer on the National Ignition Facility (NIF)

The time-resolving magnetic recoil spectrometer (MRSt) is a transformative diagnostic that will be used to measure the time-resolved neutron spectrum from an inertial confinement fusion implosion at the National Ignition Facility (NIF). It uses a CD foil on the outside of the hohlraum to convert fusion neutrons to recoil deuterons. An ion-optical system positioned outside the NIF target chamber energy-disperses and focuses forward-scattered deuterons. A pulse-dilation drift tube (PDDT) subsequently dilates, un-skews, and detects the signal. While the foil and ion-optical system have been designed, the PDDT requires more development before it can be implemented. Therefore, a phased plan is presented that first uses the foil and ion-optical systems with detectors that can be implemented immediately—namely CR-39 and hDISC streak cameras. These detectors will allow the MRSt to be commissioned in an intermediate stage and begin collecting data on a reduced timescale, while the PDDT is developed in parallel. A CR-39 detector will be used in phase 1 for the measurement of the time-integrated neutron spectra with excellent energy-resolution, necessary for the energy calibration of the system. Streak cameras will be used in phase 2 for measurement of the time-resolved spectrum with limited spectral coverage, which is sufficient to diagnose the time-resolved ion temperature. Simulations are presented that predict the performance of the streak camera detector, indicating that it will achieve excellent burn history measurements at current yields, and good time-resolved ion-temperature measurements at yields above 3 × 10 17 . The PDDT will be used for optimal efficiency and resolution in phase 3.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Gyrokinetic simulation of turbulence and transport in the SPARC tokamak

The turbulence and transport expected in the SPARC tokamak Primary Reference Discharge (PRD) [P. Rodriguez-Fernandez et al., J. Plasma Phys. 86, 865860503 (2020)] have been investigated with the gyrokinetic code CGYRO [J. Candy et al., J. Comput. Phys. 324, 73–93 (2016)]. Linear and nonlinear simulations that focus on ion (kθρs<1.0) and electron-scale (kθρs>1.0) turbulence were used to probe the nature of the turbulence and the resulting transport in the fusion core. It is found that in the SPARC PRD, ion temperature gradient (ITG) turbulence is expected to dominate transport over most of the profile with some potential trapped electron mode impact in the near edge. Stiff turbulence is observed over a part of the plasma core such that SPARC's ion temperature profile will likely be pinned to just above the critical gradient for ITG. The role of electromagnetic turbulence, rotation, and electron-scale turbulence was investigated to provide some insight into the physics required to accurately predict SPARC performance via gyrokinetics. Additionally, predictions of impurity peaking for potential low- and high-Z SPARC first-wall materials are probed using ion-scale simulation. The dominance of low-k turbulence in SPARC provides a potential opportunity for more tractable prediction of plasma profiles using nonlinear gyrokinetics. This work is the first step toward full gyrokinetic profile prediction of SPARC kinetic profiles and the resulting fusion power and plasma gain.

Howard, N. T. (ORCID:0000000287876309)↗
DOE OSTI2020

Modeling gas–shell mixing in ICF with separated reactants

Mixing between fuel and shell materials in ICF implosions can affect implosion dynamics and even prevent ignition. We use data from a series of separated reactant experiments on the National Ignition Facility to calibrate and test the predictive power of gas–shell mix models. Two models are used to estimate fuel–shell mix: a Reynolds-averaged turbulence model and molecular diffusion. Minor uncertainties in capsule manufacture, experimental conditions, and values for mix model parameters produce significant variation in simulation results. Using input/output pairs from 1D simulations, we train Gaussian process surrogate models to predict experimental quantities of interest. The surrogates are used to construct posteriors for mix model parameters by marginalizing over uncertainties in capsule manufacture and experimental conditions. Mix models are calibrated with a subset of experimental data (neutron yields, ion temperature, and bang time) and tested using the remaining data. In general, both the diffusion and turbulence model correctly predict experimental DT and TT neutron yields. Despite having more free parameters, the turbulence model underpredicts ion temperature at high convergence ratio. Furthermore, the simpler diffusion model correctly predicts these temperatures, suggesting nonhydrodynamic gas–shell mix. The computational model consistently overpredicts DD neutron yield, indicating possible shortcomings outside of the mix model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Feasibility and performance of the staged Z-pinch: A one-dimensional study with FLASH and MACH2

Z-pinch platforms constitute a promising pathway to fusion energy research. Here, we present a one-dimensional numerical study of the staged Z-pinch (SZP) concept using the FLASH and MACH2 codes. We discuss the verification of the codes using two analytical benchmarks that include Z-pinch-relevant physics, building confidence on the codes' ability to model such experiments. Then, FLASH is used to simulate two different SZP configurations: a xenon gas-puff liner (SZP1*) and a silver solid liner (SZP2). The SZP2 results are compared against previously published MACH2 results, and a new code-to-code comparison on SZP1* is presented. Using an ideal equation of state and analytical transport coefficients, FLASH yields a fuel convergence ratio (CR) of approximately 39 and a mass-averaged fuel ion temperature slightly below 1 keV for the SZP2 scheme, significantly lower than the full-physics MACH2 prediction. For the new SZP1* configuration, full-physics FLASH simulations furnish large and inherently unstable CRs (>300) but achieve fuel ion temperatures of many kilo-electron volts. While MACH2 also predicts high temperatures, the fuel stagnates at a smaller CR. The integrated code-to-code comparison reveals how magnetic insulation, heat conduction, and radiation transport affect platform performance and the feasibility of the SZP concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Laser propagation in a subcritical foam: Subgrid model

Here, we present a subgrid model for laser propagation in a subcritical foam. Our model describes the expansion of laser-irradiated foam elements that are below the resolution of the simulation grid and predicts the plasma conditions that result from burning down the foam. Our model can be included as a module within a larger multiphysics code, and we have implemented it within the code pF3D, which is used for simulating a laser-plasma interaction. The model predicts a reduced propagation velocity for a laser through a subcritical foam compared to simulating that foam as a homogeneous gas. This is attributed to the laser energy that goes into burning down the foam microstructure. We compare our model against experimental data by simulating a 2 mg/cc SiO 2 foam shot performed at the Janus laser facility at the Lawrence Livermore National Laboratory. pF3D simulations with the foam model predict hot ion temperatures. This leads to a reduction in the level of stimulated Brillouin scattering (SBS), bringing the simulated level of SBS into agreement with the data. Intensity fluctuations at the foam front due to laser speckles and refraction result in ion temperature fluctuations when the foam burns down. These drive long-lived electron density fluctuations on scales that are large compared to the pore size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Using statistical modeling to predict and understand fusion experiments

Over 300 cryogenic layered direct-drive inertial confinement fusion implosions have been successfully executed on the OMEGA Laser System in the last decade. However, extracting sufficient understanding from these experiments to develop new designs or to identify or mitigate degradation sources remains challenging. Recently, a statistical modeling approach was developed to successfully design and predict improved implosion experiments on OMEGA. Here, we show that one-dimensional simulations can be used to predict the outcomes of systematically perturbed three-dimensional simulations and that this statistical modeling approach can be used to identify or rule out physical mechanisms for some of the degradation sources observed on the OMEGA Laser System for direct-drive cryogenic inertial confinement fusion. In this instance, we investigate the fusion yield dependencies on the ion temperature asymmetries and laser beam size observed in experiments by comparing with trends in three-dimensional synthetic simulation databases. Using the statistical model on these systematically perturbed simulations, we find that the statistically inferred dependency on the measured ion temperature asymmetries is well explained by imposed ℓ =1 modes. However, we find that the dependency on the laser beam size is only dominated by the illumination non-uniformity for some extreme cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

First-principles based plasma profile predictions for optimized stellarators

In the present Letter, first-of-its-kind computer simulations predicting plasma profiles for modern optimized stellarators—while self-consistently retaining neoclassical transport, turbulent transport with 3D effects, and external physical sources—are presented. These simulations exploit a newly developed coupling framework involving the global gyrokinetic turbulence code GENE-3D, the neoclassical transport code KNOSOS, and the 1D transport solver TANGO. This framework is used to analyze the recently observed degradation of energy confinement in electron-heated plasmas in the Wendelstein 7-X stellarator, where the central ion temperature was 'clamped' to $T_\textrm i \approx 1.5$ keV regardless of the external heating power. By performing first-principles based simulations, we provide key evidence to understand this effect, namely the inefficient thermal coupling between electrons and ions in a turbulence-dominated regime, which is exacerbated by the large $T_\textrm e/T_\textrm i$ ratios, and show that a more efficient ion heat source, such as direct ion heating, will increase the on-axis ion temperature. This work paves the way towards the use of high-fidelity models for the development of the next generation of stellarators, in which neoclassical and turbulent transport are optimized simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Gyrokinetic profile prediction and validation of a negative triangularity plasma in ASDEX Upgrade

In this work, gyrokinetic simulations are performed with the CGYRO code (Candy et al 2016 J. Comput. Phys. 324 73–93) for a negative triangularity H-mode plasma in ASDEX Upgrade, and compared with experimental measurements. The PORTALS framework (Rodriguez-Fernandez et al 2024 Nucl. Fusion 64 076034) is used to accelerate the prediction of kinetic profiles for this plasma, using surrogate modeling and Bayesian optimization. Ion heat flux, electron heat flux, and electron particle flux are simultaneously matched across the simulated radial regime of the plasma (normalized radius $r/a = 0.35-0.90$), and the resulting ion temperature, electron temperature, and electron density profiles match well with the experimental profile data within this radial range. A synthetic Correlation Electron Cyclotron Emission diagnostic is applied to find well-matched electron temperature fluctuation properties between simulation and experiment. The flux-matched profiles provide a basis for investigation of the turbulence nature across the plasma radius, revealing the dominance of Trapped Electron Mode turbulence at $r/a = 0.35$, the dominance of Ion Temperature Gradient turbulence at $r/a = 0.55$, 0.75, and 0.83, and an instability boundary at $r/a = 0.90$.

gyrokinetic simulation↗