Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAMINAR BOUNDARY LAYER SEPARATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Advanced boundary layer transition measurement methods for flight applications

In modern laminar flow flight research, it is important to understand the specific cause(s) of laminar to turbulent boundary-layer transition. Such information is crucial to the exploration of the limits of practical application of laminar flow for drag reduction on aircraft. The transition modes of interest in current flight investigations include the viscous Tollmien-Schlichting instability, the inflectional instability at laminar separation, and the crossflow inflectional instability, as well as others. This paper presents the results to date of research on advanced devices and methods used for the study of laminar boundary-layer transition phenomena in the flight environment. Recent advancements in the development of arrayed hot-film devices and of a new flow visualization method are discussed. Arrayed hot-film devices have been designed to detect the presence of laminar separation, and of crossflow vorticity. The advanced flow visualization method utilizes color changes in liquid-crystal coatings to detect boundary-layer transition at high altitude flight conditions. Flight and wind tunnel data are presented to illustrate the design and operation of these advanced methods. These new research tools provide information on disturbance growth and transition mode which is essential to furthering our understanding of practical design limits for applications of laminar flow technology.

Holmes, B. J.↗
NASA NTRS1983

Flow measurements of an airfoil with deflected spoiler

Spoilers are used as an effective control surface in various stages of flight. The steady and unsteady flow characteristics change with incidence and spoiler angle. An experimental investigation is undertaken to understand the flow phenomena. Typical boundary layer and wake profiles at various incidences and spoiler angles are presented and discussed. A laminar separation is observed at low incidence and high spoiler angle. At incidence, a turbulent boundary layer develops and separation point moves downstream. Generally the wake profiles are asymmetric. When different length scales are used, the profiles become self-similar and symmetric. The importance of laser velocimetry in the reverse flow region is demonstrated by comparing the preliminary LDV measurements with the hot-wire results.

Lee, C. S.↗
NASA NTRS1976

Laminar boundary-layer solutions in three dimensions

As an alternative to pure finite-difference techniques, the Method of Integral Relations (MIR) is formulated for three-dimensional boundary-layer flows with separation, and applied to two problems. The first concerns an incompressible laminar flow over a plate with an attached cylinder, where the potential solution of the flow round the circular cylinder is used as the boundary condition. In the second application the solution to the three-dimensional boundary-layer flow over blunt bodies is discussed and results for an ellipsoid of revolution at 30 deg incidence are presented. In both cases the results are found to be in satisfactory agreement with those obtained by finite-difference methods.

Modarress, D.↗
NASA NTRS2004

DSMC Simulations of Hypersonic Flows With Shock Interactions and Validation With Experiments

The capabilities of a relatively new direct simulation Monte Carlo (DSMC) code are examined for the problem of hypersonic laminar shock/shock and shock/boundary layer interactions, where boundary layer separation is an important feature of the flow. Flow about two model configurations is considered, where both configurations (a biconic and a hollow cylinder-flare) have recent published experimental measurements. The computations are made by using the DS2V code of Bird, a general two-dimensional/axisymmetric time accurate code that incorporates many of the advances in DSMC over the past decade. The current focus is on flows produced in ground-based facilities at Mach 12 and 16 test conditions with nitrogen as the test gas and the test models at zero incidence. Results presented highlight the sensitivity of the calculations to grid resolution, sensitivity to physical modeling parameters, and comparison with experimental measurements. Information is provided concerning the flow structure and surface results for the extent of separation, heating, pressure, and skin friction.

Moss, James N.↗
NASA NTRS2004

DSMC Simulations of Hypersonic Flows With Shock Interactions and Validation With Experiments

The capabilities of a relatively new direct simulation Monte Carlo (DSMC) code are examined for the problem of hypersonic laminar shock/shock and shock/boundary layer interactions, where boundary layer separation is an important feature of the flow. Flow about two model configurations is considered, where both configurations (a biconic and a hollow cylinder-flare) have recent published experimental measurements. The computations are made by using the DS2V code of Bird, a general two-dimensional/axisymmetric time accurate code that incorporates many of the advances in DSMC over the past decade. The current focus is on flows produced in ground-based facilities at Mach 12 and 16 test conditions with nitrogen as the test gas and the test models at zero incidence. Results presented highlight the sensitivity of the calculations to grid resolutions, sensitivity to physical modeling parameters, and comparison with experimental measurements. Information is provided concerning the flow structure and surface results for the extent of separation, heating, pressure, and skin friction.

Moss, James N.↗
NASA NTRS1979

Axial-flow compressor turning angle and loss by inviscid-viscous interaction blade-to-blade computation

A method for computation of the flow field around an arbitrary airfoil cascade on an axially symmetric blade-to-blade surface was developed which takes into account the development and separation of the blade surface boundary layers and mixing in the wake. The method predicts the overall fluid turning and total pressure loss in the context of an inviscid-viscous interaction scheme. The inviscid flow solution is obtained from a compressible flow matrix method. The viscous flow is obtained from a differential boundary layer method which calculates laminar, transitional and turbulent boundary layers. Provisions for the calculation of laminar and turbulent separation regions were added to the viscous scheme. The combined inviscid-viscous interaction scheme described yields results which are quantitatively consistent with experimental data. This suggests that the physical basis for the interactive system is correct and justifies continued exploration and use of the method.

Hansen, E. C.↗
NASA NTRS1976

The structure of shock wave-boundary layer interactions in transonic flow

The structure of transonic shock wave-boundary layer interactions is studied using asymptotic analyses, for an oblique shock impinging on a flat plate boundary layer. Solutions for unseparated laminar and turbulent boundary layers are reviewed, and incipient separation of a turbulent boundary layer is considered.

Adamson, T. C., Jr.↗
NASA NTRS2002

Experimental Investigation of Transition to Turbulence as Affected by Passing Wakes

Experimental results from a study of the effects of passing wakes upon laminar-to-turbulent transition in a low-pressure turbine passage are presented. The test section geometry is designed to simulate the effects of unsteady wakes resulting from rotor-stator interaction upon laminar-to-turbulent transition in turbine blade boundary layers and separated flow regions over suction surfaces. Single-wire, thermal anemometry techniques were used to measure time- resolved and phase-averaged, wall-normal profiles of velocity, turbulence intensity, and intermittency at multiple streamwise locations over the turbine airfoil suction surface. These data are compared to steady state, wake-free data collected in the same geometry to identify the effects of wakes upon laminar-to-turbulent transition. Results are presented for flows with a Reynolds number based on suction surface length and exit velocity of 50,000 and an approach flow turbulence intensity of 2.5 percent. From these data, the effects of passing wakes and associated increased turbulence levels and varying pressure gradients on transition and separation in the near-wall flow are presented. The results show that the wakes affect transition both by virtue of their difference in turbulence level from that of the free-stream but also by virtue of their velocity deficit relative to the freestream velocity, and the concomitant change in angle of attack and temporal pressure gradients. The results of this study seem to support the theory that bypass transition is a response of the near-wall viscous layer to pressure fluctuations imposed upon it from the free-stream flow. The data also show a significant lag between when the wake is present over the surface and when transition begins. The accompanying CD-ROM includes tabulated data, animations, higher resolution plots, and an electronic copy of this report.

Kaszeta, Richard W.↗
NASA NTRS2002

Experimental Investigation of Transition to Turbulence as Affected by Passing Wakes

Experimental results from a study of the effects of passing wakes upon laminar-to-turbulent transition in a low-pressure turbine passage are presented. The test section geometry is designed to simulate the effects of unsteady wakes resulting from rotor-stator interaction upon laminar-to-turbulent transition in turbine blade boundary layers and separated flow regions over suction surfaces. Single-wire, thermal anemometry techniques were used to measure time-resolved and phase-averaged, wall-normal profiles of velocity, turbulence intensity, and intermittency at multiple streamwise locations over the turbine airfoil suction surface. These data are compared to steady state, wake-free data collected in the same geometry to identify the effects of wakes upon laminar-to-turbulent transition. Results are presented for flows with a Reynolds number based on suction surface length and exit velocity of 50,000 and an approach flow turbulence intensity of 2.5 percent. From these data, the effects of passing wakes and associated increased turbulence levels and varying pressure gradients on transition and separation in the near-wall flow are presented. The results show that the wakes affect transition both by virtue of their difference in turbulence level from that of the free-stream but also by virtue of their velocity deficit relative to the freestream velocity, and the concomitant change in angle of attack and temporal pressure gradients. The results of this study seem to support the theory that bypass transition is a response of the near-wall viscous layer to pressure fluctuations imposed upon it from the free-stream flow. The data also show a significant lag between when the wake is present over the surface and when transition begins. The accompanying CD-ROM includes tabulated data, animations, higher resolution plots, and an electronic copy of this report.

Kaszeta, Richard W.↗
NASA NTRS1982

Turbulence effect on crossflow around a circular cylinder at subcritical Reynolds numbers

An investigation of the effect of freestream turbulence on the flow around a smooth circular cylinder at subcritical Reynolds numbers from 5.2 x 10 to the 4th power to 2.09 x 10 to the 5th power was conducted. Measurements show that the interaction of incident turbulence with the initial laminar boundary layer: (1) modifies the characteristics of the mean surface pressure distribution; (2) induces an aft shift in the separation point ranging from 5 to 50 beyond the laminar separation angle of 80 degrees; and, (3) reduces the mean drag coefficient to values between 97 and 46% of its nearly constant laminar counterpart. The extent of these changes depends on the particular Reynolds number background turbulence combination. These results demonstrate that a boundary-layer flow similar to that found in critical, supercritical and/or transcritical flow regimes is induced by turbulence at subcritical Reynolds numbers and, hence, the effect of turbulence is equivalent to an effective increase in the Reynolds number. The change in the nature and properties of the boundary layer in the subcritical regime, consequent upon the penetration of turbulence into it, is in agreement with the model proposed by the vorticity-amplification theory.

Sadeh, W. Z.↗
NASA NTRS1983

Experimental studies of the boundary layer on an airfoil at low Reynolds numbers

An experimental wind tunnel investigation was carried out to study the effect of laminar separation bubbles on a NACA 66(3)-018 airfoil for Reynolds numbers less than 4.0 x 10 to the 5th. Leading edge laminar separation bubbles formed for angles of attack of approximately 7 to 12 deg. To study the leading edge separation bubble more closely, hotwire anemometer measurements were made in the airfoil a Reynolds number of 8.0 x 10 to the 4th. Velocity and turbulence intensity profiles were obtained and boundary layer parameters were calculated. Frequency spectra were also calculated at key points in the airfoil boundary layer for this case. Correlation of the anemometry data with static pressure distributions, and flow visualization data provided insight into laminar separation bubble behavior at low Reynolds numbers.

Jansen, B. J., Jr.↗
NASA NTRS1978

Application of higher-order numerical methods to the boundary-layer equations

A fourth-order method is presented for calculating numerical solutions to parabolic, partial differential equations in two variables or ordinary differential equations. The method is the natural extension of the second-order Keller Box Scheme to fourth order and is demonstrated with application to the incompressible, laminar and turbulent boundary-layer equations for both attached and separated flows. The efficiency of the present method is compared with other higher-order methods; namely, the Keller Box Scheme with Richardson extrapolation, the method of deferred corrections, the three-point spline methods, and a modified finite-element method. For equivalent accuracy, numerical results show the present method to be more efficient than the other higher-order methods for both laminar and turbulent flows.

Wornom, S. F.↗
NASA NTRS1980

Disturbance amplification rates

Program computes incompressible linear stability characteristics for swept and tapered wings. Amplification rates of boundary-layer disturbances also are calculated. Program is useful in designing tapered, laminar-flow control wings incorporating suction to prevent boundary layer separation. Program is written in FORTRAN IV and Assembler for batch execution on CYBER 70-series.

Srokowski, A. J.↗
NASA NTRS1952

Experimental Investigation of Base Pressure on Blunt-Trailing-Edge Wings at Supersonic Velocities

Measurements of base pressure are presented for 29 blunt-trailing-edge wings having an aspect ratio of 3.0 and various airfoil profiles. The different profiles comprised thickness ratios between 0.05 and 0.10, boattail angles between -2.9 degrees and 20 degrees, and ratios of trailing-edge thickness to airfoil thickness between 0.2 and 1.0. The tests were conducted at Mach numbers of 1.25, 1.5, 2.0, and 3.1. For each Mach number, the Reynolds number and angle of attack were varied. The lowest Reynolds number investigated was 0.2 x 10(6) and the highest was 3.5 x 10(6). Measurements on each wing were obtained separately with turbulent flow and laminar flow in the boundary layer. Span-wise surveys of the base pressure were conducted on several wings. The results with turbulent boundary-layer flow showed only small effects on base pressure of variations in Reynolds number, airfoil profile shape, boattail angle, and angle of attack. The principal variable affecting the base pressure for turbulent flow was the Mach number.

Chapman, Dean R↗
NASA NTRS2007

Experimental Investigation of Transition to Turbulence as Affected by Passing Wakes: Effects of High FSTI and Increased Rod Spacing

Experimental results from a study of the effects of passing wakes upon laminar-to-turbulent transition in a low-pressure turbine passage are presented. The test section geometry is designed to simulate the effects of unsteady wakes resulting from rotor-stator interaction upon laminar-to-turbulent transition in turbine blade boundary layers and separated flow regions over suction surfaces. Single-wire, thermal anemometry techniques are used to measure time-resolved and phase-averaged, wall-normal profiles of velocity, turbulence intensity and intermittency at multiple streamwise locations over the turbine airfoil suction surface. The Reynolds number based on suction surface length and stage exit velocity is 50,000. This study compares a previously documented base case flow having an approach flow turbulence intensity of 2.5 percent and a wake passing Strouhal number of 0.792 to two additional cases: one having an increased rod spacing case having a wake passing Strouhal number of 0.396, and another having an elevated approach flow turbulence intensity of 10 percent. From these data, the effects of increased rod spacing and elevated FSTI upon transition and separation processes in the near-wall flow are documented. The results show that a decreased wake passing Strouhal number results in an earlier separation with a larger separation bubble, while the elevated FSTI results in earlier separation, but with a shorter, thinner, separation bubble. The data and animations are included in an accompanying CD ROM.

Kaszeta, Richard W.↗
NASA NTRS1992

Evaluation and application of the Baldwin-Lomax turbulence model in two-dimensional, unsteady, compressible boundary layers with and without separation in engine inlets

There is a practical need to model high speed flows that exist in jet engine inlets. The boundary layers that form in these inlets may be turbulent or laminar and either separated or attached. Also, unsteady supersonic inlets may be subject to frequent changes in operating conditions. Some changes in the operating conditions of the inlets may include varying the inlet geometry, bleeds and bypasses, and rotating or translating the centerbody. In addition, the inlet may be either started or unstarted. Therefore, a CFD code, used to model these inlets, may have to run for several different cases. Also, since the flow conditions through an unsteady inlet may be continually fluctuating, the CFD code which models these flows may have to be run over many time steps. Therefore, it would be beneficial that the code run quickly. Many turbulence models, however, are cumbersome to implement and require a lot of computer time to run, since they add to the number of differential equations to be solved to model a flow. The Baldwin-Lomax turbulence model is a popular model. It is an algebraic, eddy viscosity model. The Baldwin-Lomax model is used in many CFD codes because it is quick and easy to implement. In this paper, we will discuss implementing the Baldwin-Lomax turbulence model for both steady and unsteady compressible flows. In addition, these flows may be either separated or attached. In order to apply this turbulence model to flows which may be subjected to these conditions, certain modifications should be made to the original Baldwin-Lomax model. We will discuss these modifications and determine whether the Baldwin-Lomax model is a viable turbulence model that produces reasonably accurate results for high speed flows that can be found in engine inlets.

Sakowski, Barbara↗
NASA NTRS1975

Interaction of strong shock wave with turbulent boundary layer

The reported investigation represents an extension of the time-dependent solution of separated laminar flows based on the complete Navier-Stokes equations reported by MacCormack (1971) and Carter (1973). The current study includes turbulence models in conjunction with the compressible flow equations. The calculations start with a uniform flow except for values imposed along the upstream and outer boundaries. The basic numerical method is discussed along with questions concerning the exponential accuracy and the resolution of the viscous sublayer in a compressed region.

Baldwin, B. S.↗
NASA NTRS1988

Boundary-layer control for drag reduction

Although the number of possible applications of boundary-layer control is large, a discussion is given only of those that have received the most attention recently at NASA Langley Research Center to improve airfoil drag characteristics. This research concerns stabilizing the laminar boundary layer through geometric shaping (natural laminar flow, NLF) and active control involving the removal of a portion of the laminar boundary layer (laminar flow control, LFC) either through discrete slots or a perforated surface. At low Reynolds numbers, a combination of shaping and forced transition has been used to achieve the desired run of laminar flow and control of laminar separation. In the design of both natural laminar flow and laminar flow control airfoils and wings, boundary layer stability codes play an important role. A discussion of some recent stability calculations using both incompressible and compressible codes is given.

Harvey, William D.↗