Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Low sonic boom shock control/alleviation surface

A sonic control device that reduces the effects of shock waves generated by an aircraft traveling at supersonic speeds. The control device includes a control surface located at or near the nose section of the aircraft. The position of the control surface can be moved between a retracted position and an extended position. When in a deflected position, the control surface increases the air pressure at the nose section. The increase in air pressure at the nose section decreases both the pressure amplitude and the slope of the overall shock wave as the wave travels toward the ground. Additionally, the deflection of the control surface may induce a downward directed pressure increase which creates less of a drag penalty than a truly blunt nose. When shock control is not desired, the control surface is moved back to the retracted position to reduce the drag on the plane. The moving control device allows a supersonic aircraft to efficiently travel above both land and water.

Morgenstern, John M↗
NASA NTRSDate not supplied

Soyuz Landing Reconstructions

Introduction: Recent data show a landing-attributed injury rate among Soyuz crew members to be higher than predicted in original certification analysis. New vehicles being developed for NASA are being certified using analytical tools to quantify injury risk. This assessment will provide data to allow the Agency to evaluate whether these tools are able to capture true injury risk and allow a comparison between Soyuz landings and upcoming vehicles. Methods: A finite element model (FEM) of the Soyuz descent module (DM) and its landing environment were developed to recreate Soyuz landing conditions. Occupant breakout models composed of the Soyuz seat and Sokol helmet were then developed to evaluate occupant response. These models included both anthropomorphic test device (ATD) and human body model (HBM) surrogates in three anthropometric sizes. A generalized distribution analysis of the Soyuz landing environment was performed using landing variable distributions from available literature. Results were used to identify trends in vehicle landing acceleration with landing conditions and to compare landing model injury risk predictions with those estimated in vehicle certification analysis. Next, historic Soyuz landings identified as inducing occupant injury during were reconstructed using the developed landing model and estimated landing conditions. Results and Discussion: This assessment demonstrated the capability of certification metrics, which include a combination of vehicle- and occupant-level injury risk analysis, to identify elevated injury risk landing conditions. However, the developed landing load predictions were limited by available vehicle and landing condition data. Additional data, particularly landing acceleration data specific to historic Soyuz landing conditions, would greatly enhance this assessment’s findings.

Preston Greenhalgh↗
NASA NTRS1969

Apollo spacecraft pyrotechnics

Apollo spacecraft pyrotechnics on lunar landing mission, considering standard initiator, modular cartridges, noninterchangeability of special purpose devices, postmanufacture indexing and data system

Simmons, W. H.↗
NASA NTRS1977

Low-speed wind tunnel tests of 1/9-scale model of a variable-sweep supersonic cruise aircraft

Tests were conducted in the Langley full-scale tunnel to determine the aerodynamic characteristics at low subsonic speeds of a 1/9-scale model of a variable-sweep supersonic cruise aircraft. The model configurations investigated were the basic unflapped arrangement, a take-off flap arrangement, and a landing flap arrangement with several strake leading-edge flow control devices. The tests were conducted at angles of attack from about -5 to 36 deg, sideslip angles from -5 to 10 deg.

Mclemore, H. C.↗
NASA NTRS1977

Applications of pilot scanning behavior to integrated display research

The oculometer is an electrooptical device designed to measure pilot scanning behavior during instrument approaches and landing operations. An overview of some results from a simulation study is presented to illustrate how information from the oculometer installed in a visual motion simulator, combined with measures of performance and control input data, can provide insight into the behavior and tactics of individual pilots during instrument approaches. Differences in measured behavior of the pilot subjects are pointed out; these differences become apparent in the way the pilots distribute their visual attention, in the amount of control activity, and in selected performance measures. Some of these measured differences have diagnostic implications, suggesting the use of the oculometer along with performance measures as a pilot training tool.

Waller, M. C.↗
NASA NTRS1983

Enhanced character sizes for the VDM-1 video display board

Use of a microprocessor for providing navigation information from the inherent hyperbolic geometries of Loran-C was discussed. The advantages Loran-C offers over VOR/DME as a primary navigation aid are identified. These advantages include long range coverage by several stations, coverage at low altitudes, and the capability to have nonprecision approaches at airports not already served by landing aids. Modern digital electronic technology is used to produce a device to convert Loran-C data to useful pilot information using simple software algorithms and low cost microprocessor devices. The cost and lack of availability of suitable processors to execute these algorithms have prevented a Loran-C navigator from being developed. Results indicate that the microprocessor based Loran-C navigator has an accuracy of 1.0 nm or less over an area typically covered by a triad of Loran-C stations and can execute a position update in less than 0.2 seconds.

Novacki, S. M., III↗
NASA NTRS2011

Functional Data Analysis of Spaceflight-Induced Changes in Coordination and Phase in Head Pitch Acceleration During Treadmill Walking

Astronauts returning from spaceflight experience neurovestibular disturbances during head movements and attempt to mitigate them by limiting head motion. Analyses to date of the head movements made during walking have concentrated on amplitude and variability measures extracted from ensemble averages of individual gait cycles. Phase shifts within each gait cycle can be determined by functional data analysis through the computation of time-warping functions. Large, localized variations in the timing of peaks in head kinematics may indicate changes in coordination. The purpose of this study was to determine timing changes in head pitch acceleration of astronauts during treadmill walking before and after flight. Six astronauts (5M/1F; age = 43.5+/-6.4yr) participated in the study. Subjects walked at 1.8 m/sec (4 mph) on a motorized treadmill while reading optotypes displayed on a computer screen 4 m in front of their eyes. Three-dimensional motion of the subject s head was recorded with an Inertial Measurement Unit (IMU) device. Data were recorded twice before flight and four times after landing. The head pitch acceleration was calculated by taking the time derivative of the pitch velocity data from the IMU. Data for each session with each subject were time-normalized into gait cycles, then registered to align significant features and create a mean curve. The mean curves of each postflight session for each subject were re-registered based on their preflight mean curve to create time-warping functions. The root mean squares (RMS) of these warping functions were calculated to assess the deviation of head pitch acceleration mean curves in each postflight session from the preflight mean curve. After landing, most crewmembers exhibited localized shifts within their head pitch acceleration regimes, with the greatest deviations in RMS occurring on landing day or 1 day after landing. These results show that the alteration of head pitch coordination due to spaceflight may be assessed using an analysis of time-warping functions.

Miller, Christopher↗
NASA NTRS2012

Regolith Advanced Surface Systems Operations Robot (RASSOR)

Regolith is abundant on extra-terrestrial surfaces and is the source of many resources such as oxygen, hydrogen, titanium, aluminum, iron, silica and other valuable materials, which can be used to make rocket propellant, consumables for life support, radiation protection barrier shields, landing pads, blast protection berms, roads, habitats and other structures and devices. Recent data from the Moon also indicates that there are substantial deposits of water ice in permanently shadowed crater regions and possibly under an over burden of regolith. The key to being able to use this regolith and acquire the resources, is being able to manipulate it with robotic excavation and hauling machinery that can survive and operate in these very extreme extra-terrestrial surface environments. In addition, the reduced gravity on the Moon, Mars, comets and asteroids poses a significant challenge in that the necessary reaction force for digging cannot be provided by the robot's weight as is typically done on Earth. Space transportation is expensive and limited in capacity, so small, lightweight payloads are desirable, which means large traditional excavation machines are not a viable option. A novel, compact and lightweight excavation robot prototype for manipulating, excavating, acquiring, hauling and dumping regolith on extra-terrestrial surfaces has been developed and tested. Lessons learned and test results will be presented including digging in a variety of lunar regolith simulant conditions including frozen regolith mixed with water ice.

Mueller, Robert P.↗
NASA NTRS2014

Aeroacoustic Evaluation of Flap and Landing Gear Noise Reduction Concepts

Aeroacoustic measurements for a semi-span, 18% scale, high-fidelity Gulfstream aircraft model are presented. The model was used as a test bed to conduct detailed studies of flap and main landing gear noise sources and to determine the effectiveness of numerous noise mitigation concepts. Using a traversing microphone array in the flyover direction, an extensive set of acoustic data was obtained in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel with the facility in the acoustically treated open-wall (jet) mode. Most of the information was acquired with the model in a landing configuration with the flap deflected 39 deg and the main landing gear alternately installed and removed. Data were obtained at Mach numbers of 0.16, 0.20, and 0.24 over directivity angles between 56 deg and 116 deg, with 90 deg representing the overhead direction. Measured acoustic spectra showed that several of the tested flap noise reduction concepts decrease the sound pressure levels by 2 - 4 dB over the entire frequency range at all directivity angles. Slightly lower levels of noise reduction from the main landing gear were obtained through the simultaneous application of various gear devices. Measured aerodynamic forces indicated that the tested gear/flap noise abatement technologies have a negligible impact on the aerodynamic performance of the aircraft model.

Khorrami, Mehdi R.↗
NASA NTRS2018

Assessment of Noise Reduction Concepts for Leading-Edge Slat Noise

The leading-edge slat of a high-lift airfoil can be a significant noise contributor during aircraft landing. This paper summarizes the effects of several passive noise reduction devices on the 30P30N high-lift airfoil. Experiments are conducted on a two-dimensional multi-element high-lift airfoil with leading-edge slat extensions, gap filler, and cove filler in an anechoic wind tunnel to evaluate the effect of passive flow control on the acoustics generated by the unsteady flow field. Slat geometry modifications associated with the treatments alter the flow field in the region that dominates the generation of the acoustic field. Three angles of attack (a(k) = 8°, 10°, and 15.5°) and three different Reynolds numbers (Re(c) = 1.2e6, 1.5e6, and 1.71e6) are selected as the test conditions. Steady surface pressure measurements are conducted to assess the effect of the treatments on the lift and drag. Unsteady surface pressure measurements along with the far-field acoustic array measurements are performed to evaluate the changes in near- and far-field pressure fluctuations, respectively. Delay and Sum (DAS) beamforming method is applied to locate the noise sources on the model and provide integrated spectra. Implementation difficulties with the gap filler led to structural integration deficiencies that prevented a fair assessment of this technology. Among the other passive devices, the cove filler s the most effective noise reduction, along with a negligible change in the aerodynamic metrics.

Zhang, Yang↗
NASA NTRS2021

Aircraft Flaps Modeling in OpenMDAO

The goal of this project was to develop a model for a single subsystem in the aerodynamics discipline, in this case the flaps of an aircraft. Flaps are high-lift devices used by planes to allow for quicker takeoffs, and slower landings. A computer-based aircraft model of the flaps of an aircraft was developed using the Python based open-source framework OpenMDAO. OpenMDAO is used to develop multi-disciplinary aircraft models using gradient-based optimization; design optimization (MDO) is concerned with solving design problems involving numerical models of complex engineering systems. There were 4 components in the model; each has input values, output variables, and equations to calculate said outputs. The variables and equations are sourced from NASA Fortran code from the 1970s, in a project called the General Aviation Synthesis Program (GASP). These variables and equations which create the model are being converted to Python for ease of use. The flaps model developed will be integrated into a larger model of a conventional aircraft’s flight phases. All subsystems of the model will first be built using the parameters of a Boeing 737 MAX-8, to validate its functionality and accuracy. Then, the aircraft model will be used for hybrid-electric research; running optimizations to improve efficiency, minimize fuel burn, and advance hybrid-electric technology in the aerospace field.

Computer-based aircraft modeling↗
NASA NTRS1975

Meteorological Radar Facility for the Space Shuttle

A proposed meteorological radar facility for Space Shuttle missions is described as a device suitable for providing vertical profiles of the precipitation distribution in the atmosphere above land masses and over ocean, thus ensuring three-dimensional mapping of the hydrometeor-precipitation distribution in the atmosphere. Some performance characteristics essential to orbiting meteorological radar systems and typical parameters are discussed, including large swath width, narrow beamwidth, frequency agility, and antenna configuration and orientation. Also discussed are the capabilities of the device as a test bed sensor with multiple mode capability, being able to operate in real aperture/pulse radar, real aperture/pulse Doppler and synthetic azimuth processing modes.

Eckerman, J.↗
NASA NTRS1933

Present Status of Lateral-Control Devices for use with Split Flaps, Special Report

The increased use of split flaps for the dual purpose of reducing the landing speed and shortening the landing glide of airplanes has established as acute the problem of obtaining satisfactory lateral control to be used in conjunction with the flaps with out the sacrifice of any of the effectiveness of the flaps. A large amount of work is being done on this problem by various organizations and individuals. Several of the devices developed seem usable, some of them unquestionably so. The present paper attempts to summarize the most promising results obtained to date. Topics covered include ordinary ailerons, external ailerons, floating ailerons, upper-surface ailerons, and spoilers. Although the external ailerons above the trailing edge of the wing and the spoilers at the rear of the wing appear quite promising, it would seem that probably the most satisfactory immediate solution of the problem, including the obtaining of light and smoothly graduated control forces, would in most cases be obtained by the use of the arrangement in which the flap is retracted ahead of ordinary narrow-chord ailerons and is deflected to the rear as well as downward when in use.

Weick, Fred E.↗
NASA NTRS2004

Portable Integrated Wireless Device Threat Assessment to Aircraft Radio Systems

An assessment was conducted on multiple wireless local area network (WLAN) devices using the three wireless standards for spurious radiated emissions to determine their threat to aircraft radio navigation systems. The measurement process, data and analysis are provided for devices tested using IEEE 802.11a, IEEE 802.11b, and Bluetooth as well as data from portable laptops/tablet PCs and PDAs (grouping known as PEDs). A comparison was made between wireless LAN devices and portable electronic devices. Spurious radiated emissions were investigated in the radio frequency bands for the following aircraft systems: Instrument Landing System Localizer and Glideslope, Very High Frequency (VHF) Communication, VHF Omnidirectional Range, Traffic Collision Avoidance System, Air Traffic Control Radar Beacon System, Microwave Landing System and Global Positioning System. Since several of the contiguous navigation systems were grouped under one encompassing measurement frequency band, there were five measurement frequency bands where spurious radiated emissions data were collected for the PEDs and WLAN devices. The report also provides a comparison between emissions data and regulatory emission limit.

Salud, Maria Theresa P.↗
NASA NTRS1971

The Viking mission to Mars.

In 1975 the National Aeronautics and Space Administration will launch two unmanned scientific payloads to make soft landings on Mars in 1976. They will be placed in orbit around the planet to perform a reconnaissance before landing. The spacecraft will be separated into an orbiter, which is sent to the surface. During the entry into the Martian atmosphere, Viking will make measurements of the composition and atmospheric structure. After landing, two cameras will be used to visually characterize the site. A device will be deployed to obtain a sample of the Mars surface, which will be returned to the lander for biological tests and for chemical analysis. The atmosphere at the surface will be chemically analyzed as well as the wind velocity, the humidity, and changes in temperature and pressure.

Soffen, G. A.↗
NASA NTRS1926

Photographic time studies of airplane paths

The object of this report is the description of a method which seems to be practicable for determining the path of an airplane, especially in taking off and landing. This report tells how, by means of a camera, preferably a kinetograph, which simultaneously photographs a stop watch the distance of an airplane from the camera and its height above the ground can be determined.

TIMING APPARATUS - SPEED PHOTOGRAPHIC↗