Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

LaAlO{sub 3}/Si capacitors: Comparison of different molecular beam deposition conditions and their impact on electrical properties

A study of the structural and electrical properties of amorphous LaAlO{sub 3} (LAO)/Si thin films fabricated by molecular beam deposition (MBD) is presented. Two substrate preparation procedures have been explored namely a high temperature substrate preparation technique-leading to a step and terraces surface morphology-and a chemical HF-based surface cleaning. The LAO deposition conditions were improved by introducing atomic plasma-prepared oxygen instead of classical molecular O{sub 2} in the chamber. An Au/Ni stack was used as the top electrode for its electrical characteristics. The physico-chemical properties (surface topography, thickness homogeneity, LAO/Si interface quality) and electrical performance (capacitance and current versus voltage and TunA current topography) of the samples were systematically evaluated. Deposition conditions (substrate temperature of 550 Degree-Sign C, oxygen partial pressure settled at 10{sup -6} Torr, and 550 W of power applied to the O{sub 2} plasma) and post-depositions treatments were investigated to optimize the dielectric constant ({kappa}) and leakage currents density (J{sub Gate} at Double-Vertical-Line V{sub Gate} Double-Vertical-Line = Double-Vertical-Line V{sub FB}- 1 Double-Vertical-Line ). In the best reproducible conditions, we obtained a LAO/Si layer with a dielectric constant of 16, an equivalent oxide thickness of 8.7 A, and J{sub Gate} Almost-Equal-To 10{sup -2}A/cm{sup 2}. This confirms the importance of LaAlO{sub 3} as an alternative high-{kappa} for ITRS sub-22 nm technology node.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of double ring patterns on Co{sub 2}MnSi Heusler alloy thin film by anodic oxidation under scanning probe microscope

Double ring formation on Co{sub 2}MnSi (CMS) films is observed at electrical breakdown voltage during local anodic oxidation (LAO) using atomic force microscope (AFM). Corona effect and segregation of cobalt in the vicinity of the rings is studied using magnetic force microscopy and energy dispersive spectroscopy. Double ring formation is attributed to the interaction of ablated material with the induced magnetic field during LAO. Steepness of forward bias transport characteristics from the unperturbed region of the CMS film suggest a non equilibrium spin contribution. Such mesoscopic textures in magnetic films by AFM tip can be potentially used for memory storage applications.

36 MATERIALS SCIENCE↗

Misfit strain driven cation inter-diffusion across an epitaxial multiferroic thin film interface

Cation intermixing at functional oxide interfaces remains a highly controversial area directly relevant to interface-driven nanoelectronic device properties. Here, we systematically explore the cation intermixing in epitaxial (001) oriented multiferroic bismuth ferrite (BFO) grown on a (001) lanthanum aluminate (LAO) substrate. Aberration corrected dedicated scanning transmission electron microscopy and electron energy loss spectroscopy reveal that the interface is not chemically sharp, but with an intermixing of ∼2 nm. The driving force for this process is identified as misfit-driven elastic strain. Landau-Ginzburg-Devonshire-based phenomenological theory was combined with the Sheldon and Shenoy formula in order to understand the influence of boundary conditions and depolarizing fields arising from misfit strain between the LAO substrate and BFO film. The theory predicts the presence of a strong potential gradient at the interface, which decays on moving into the bulk of the film. This potential gradient is significant enough to drive the cation migration across the interface, thereby mitigating the misfit strain. Our results offer new insights on how chemical roughening at oxide interfaces can be effective in stabilizing the structural integrity of the interface without the need for misfit dislocations. These findings offer a general formalism for understanding cation intermixing at highly strained oxide interfaces that are used in nanoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

BiFeO{sub 3}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} heterostructures deposited on spark plasma sintered LaAlO{sub 3} substrates

Multiferroic BiFeO{sub 3} (BFO)/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} heterostructured thin films were grown by pulsed laser deposition on polished spark plasma sintered LaAlO{sub 3} (LAO) polycrystalline substrates. Both polycrystalline LAO substrates and BFO films were locally characterized using electron backscattering diffraction, which confirmed the high-quality local epitaxial growth on each substrate grain. Piezoforce microscopy was used to image and switch the piezo-domains, and the results are consistent with the relative orientation of the ferroelectric variants with the surface normal. This high-throughput synthesis process opens the routes towards wide survey of electronic properties as a function of crystalline orientation in complex oxide thin film synthesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interface control of ferroelectricity in LaNiO{sub 3}-BaTiO{sub 3} superlattices

LaNiO{sub 3}-BaTiO{sub 3} superlattices with different types of interfaces are studied from first-principles density-functional theory. It is revealed that the ferroelectricity in the superlattice with (NiO{sub 2}){sup −}/(BaO){sup 0} interfaces is enhanced from that of the superlattice with (LaO){sup +}/(TiO{sub 2}){sup 0} interfaces. The origin lies at the polar discontinuity at the interface, which makes the holes localized within the (NiO{sub 2}){sup −}/(BaO){sup 0} interface, but drives a penetration of electrons into BaTiO{sub 3} component near (LaO){sup +}/(TiO{sub 2}){sup 0} interface. Our calculations demonstrate an effective avenue to the robust ferroelectricity in BaTiO{sub 3} ultrathin films.

36 MATERIALS SCIENCE↗

X-ray analysis of strain distribution in two-step grown epitaxial SrTiO{sub 3} thin films

Epitaxial SrTiO{sub 3} (STO) thin films were grown on (001)-oriented LaAlO{sub 3} (LAO) substrates using a two-step growth method by ion beam sputter deposition. An STO buffer layer was initially grown on the LAO substrate at a low temperature of 150 °C prior to growing the STO main layer at 750 °C. The thickness of the STO buffer layer was varied at 3, 6, and 10 nm, while the total film thickness was kept constant at approximately 110 nm. According to x-ray structural analysis, we show that the STO buffer layer plays an essential role in controlling the strain in the STO layer grown subsequently. It is found that the strains in the STO films are more relaxed with an increase in buffer layer thickness. Moreover, the strain distribution in two-step grown STO films becomes more homogeneous across the film thickness when compared to that in directly grown STO film.

36 MATERIALS SCIENCE↗

Langmuir probe measurements and mass spectrometry of plasma plumes generated by laser ablation of La{sub 0.4}Ca{sub 0.6}MnO{sub 3}

The plasma formed in vacuum by UV nanosecond laser ablation of La{sub 0.4}Ca{sub 0.6}MnO{sub 3} in the fluence range of 0.8 to 1.9 J cm{sup −2} using both Langmuir probe analysis and energy-resolved mass spectrometry has been studied. Mass spectrometry shows that the main positive ion species are Ca{sup +}, Mn{sup +}, La{sup +}, and LaO{sup +}. The Ca{sup +} and Mn{sup +} energy distributions are quite broad and lie in the 0–100 eV region, with the average energies increasing with laser fluence. In contrast, the La{sup +} and LaO{sup +} distributions are strongly peaked around 10 eV. The net time-of-arrival signal derived from the measured positive ion energy distributions is broadly consistent with the positive ion signal measured by the Langmuir probe. We also detected a significant number of O{sup −} ions with energies in the range of 0 to 10 eV. The Langmuir probe was also used to measure the temporal variation of the electron density and temperature at 6 cm from the ablation target. In the period when O{sup −} ions are found at this position, the plasma conditions are consistent with those required for significant negative oxygen ion formation, as revealed by studies on radio frequency excited oxygen plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of substrate and orientation on charge ordering behaviors in epitaxial Pr{sub 0.5}Ca{sub 0.35}Sr{sub 0.15}MnO{sub 3} films

The charge ordering (CO) behaviors of Pr{sub 0.5}Ca{sub 0.35}Sr{sub 0.15}MnO{sub 3} films grown on STO(100), STO(110) and LAO(100) are systematically investigated by transport measurements and transmission electron microscopy (TEM) examinations. From the transport measurements, the CO transition temperatures of all the three films are much higher than those of the bulk materials, showing that the film strain could enhance the CO transition. From TEM observations, many superlattice spots appear in the electron diffraction patterns taken from the films, indicating the appearance of the CO modulation structures at room temperature. The modulation vectors are determined to be (1/2, 0, 0) for STO (100), (1/2, 1/2, 1/2) for STO (110), and both (0, 1/2, 0) and (1/2, 1/2, 0) for LAO (100). It is shown that both the substrate orientation and the film strain have a great effect on the CO modulation structures. The CO state is much easier to appear in the compressive strain direction which is due to the Mn-O-Mn angle tilting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two symmetric n-type interfaces SrTiO{sub 3}/LaAlO{sub 3} in perovskite: Electronic properties from density functional theory

The first principles study of the (001) two symmetric n-type interfaces between two insulating perovskites, the nonpolar SrTiO{sub 3} (STO), and the polar LaAlO{sub 3} (LAO) was performed. We have analyzed the formation of metallic interface states between the STO and LAO heterointerfaces by using the all-electron full-potential linearized augmented plane-wave approach based on the density functional theory, within the local density approximation, the Perdew-Burke-Ernzerhof generalized gradient approximation (PBE-GGA), and the Engel-Vosko GGA (EVGGA) formalism. It has been found that some bands cross the Fermi energy level (E{sub F}), forming a metallic nature of two symmetric n-type 6.5STO/1.5LAO interfaces with density of states at E{sub F}, N(E{sub F}) of about 3.56 (state/eV/unit cell), and bare electronic specific heat coefficient (γ) of about 0.62 mJ/(mol cell K{sup 2}). The electronic band stature and the partial density of states in the vicinity of E{sub F} are mainly originated from Ti1,2,3,4-3dxy orbitals. These bands are responsible for the metallic behavior and the forming of the Fermi surface of the two symmetric n-type 6.5STO/1.5LAO interfaces. To obtain a clear map of the valence band electronic charge density distribution of the two symmetric n-type 6.5STO/1.5LAO interfaces, we have investigated the bond's nature and the interactions between the atoms. It reveals that the charge is attracted towards O atoms as it is clear that the O atoms are surrounded by uniform blue spheres which indicate the maximum charge accumulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electric field control of the γ-Al{sub 2}O{sub 3}/SrTiO{sub 3} interface conductivity at room temperature

Controlling interfaces using electric fields is at the heart of modern electronics. The discovery of the conducting interface between the two insulating oxides LaAlO{sub 3} (LAO) and SrTiO{sub 3} (STO) has led to a number of interesting electric field-dependent phenomena. Recently, it was shown that replacing LAO with a spinel γ-Al{sub 2}O{sub 3} (GAO) allows a good pseudo-epitaxial film growth and high electron mobility at low temperatures. Here, we show that the GAO/STO interface resistance, similar to LAO/STO, can be tuned by orders of magnitude at room temperature using the electric field of a backgate. The resistance change is non-volatile, bipolar, and can be tuned continuously rather than being a simple on/off switch. Exposure to light significantly changes the capabilities to tune the interface resistance. High- and low-resistive states are obtained by annihilation and creation, respectively, of free n-type carriers, and we speculate that electromigration of oxygen vacancies is the origin of the tunability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain- and thickness-dependent magnetic properties of epitaxial La 0.67 Sr 0.33 CoO 3 /La 0.67 Sr 0.33 MnO 3 bilayers

Magnetic properties and interfacial phenomena of epitaxial perovskite oxides depend sensitively on parameters such as film thickness and strain state. In this work, epitaxial La0 .67 Sr 0.33 CoO 3 (LSCO)/La 0.67 Sr 0.33 MnO 3 (LSMO) bilayers were grown on NdGaO 3 (NGO) and LaAlO 3 (LAO) substrates with a fixed LSMO thickness of 6 nm, and LSCO thickness (t LSCO ) varying from 2 to 10 nm. Soft x-ray magnetic spectroscopy revealed that magnetically active Co 2+ ions that strongly coupled to the LSMO layer were observed below a critical t LSCO for bilayers grown on both substrates. On LAO substrates, this critical thickness was 2 nm, above which the formation of Co 2+ ions was quickly suppressed leaving only a soft LSCO layer with mixed valence Co 3+ /Co 4+ ions. The magnetic properties of both LSCO and LSMO layers displayed strong t LSCO dependence. This critical t LSCO increased to 4 nm on NGO substrates, and the magnetic properties of only the LSCO layer displayed t LSCO dependence. A non-magnetic layer characterized by Co 3+ ions and with a thickness below 2 nm exists at the LSCO/substrate interface for both substrates. Therefore, the results contribute to the understanding of interfacial exchange spring behavior needed for applications in next generation spintronic and magnetic memory devices.

36 MATERIALS SCIENCE↗

Nanoscale control of LaAlO 3 /SrTiO 3 conductance beyond the polar catastrophe

Conductive atomic force microscope (c-AFM) lithography can be utilized to create a wide range of LaAlO 3 /SrTiO 3 (LAO/STO)-based nanoelectronic devices in a reconfigurable manner. Experiments were generally performed with intrinsically insulating LAO/STO heterostructures, with LAO thickness less than the critical value at which a polar catastrophe takes place [<4 unit cell (u.c.)]. Here, we use inductively coupled plasma reactive ion etching (ICPRIE) to fabricate c-AFM “canvases” on intrinsically conducting LAO/STO samples with ≥4 u.c. LAO. We observe that its interfacial two-dimensional electron gas (2DEG) can be pinched off and then switched back on by c-AFM lithography. Nanowires created with initially conductive LAO/STO interfaces have an order-of-magnitude longer lifetime in ambient conditions, when compared to an identically created 3.4 u.c. LAO/STO nanowire. We also demonstrate key nanoscale properties such as ballistic transport in a quasi-one-dimensional electron waveguide at a 5 u.c. LAO/STO interface. This approach frees c-AFM-written nanodevice designs from time constraints in air associated with <4 u.c. LAO/STO heterostructures.

36 MATERIALS SCIENCE↗

TESTING THE APODIZED PUPIL LYOT CORONAGRAPH ON THE LABORATORY FOR ADAPTIVE OPTICS EXTREME ADAPTIVE OPTICS TESTBED

We present testbed results of the Apodized Pupil Lyot Coronagraph (APLC) at the Laboratory for Adaptive Optics (LAO). These results are part of the validation and tests of the coronagraph and of the Extreme Adaptive Optics (ExAO) for the Gemini Planet Imager (GPI). The apodizer component is manufactured with a halftone technique using black chrome microdots on glass. Testing this APLC (like any other coronagraph) requires extremely good wavefront correction, which is obtained to the 1 nm rms level using the microelectricalmechanical systems (MEMS) technology, on the ExAO visible testbed of the LAO at the University of Santa Cruz. We used an APLC coronagraph without central obstruction, both with a reference super-polished flat mirror and with the MEMS to obtain one of the first images of a dark zone in a coronagraphic image with classical adaptive optics using a MEMS deformable mirror (without involving dark hole algorithms). This was done as a complementary test to the GPI coronagraph testbed at American Museum of Natural History, which studied the coronagraph itself without wavefront correction. Because we needed a full aperture, the coronagraph design is very different from the GPI design. We also tested a coronagraph with central obstruction similar to that of GPI. We investigated the performance of the APLC coronagraph and more particularly the effect of the apodizer profile accuracy on the contrast. Finally, we compared the resulting contrast to predictions made with a wavefront propagation model of the testbed to understand the effects of phase and amplitude errors on the final contrast.

79 ASTRONOMY AND ASTROPHYSICS↗

Magneto-optical characterizations of FeTe₀̣₅Se₀̣₅ thin films with critical current density over 1 MA/cm²

We performed magneto-optical (MO) measurements on FeTe₀̣₅Se₀̣₅ thin films grown on LaAlO₃ (LAO) and Yttria-stabilized zirconia (YSZ) single-crystalline substrates. These thin films show superconducting transition temperature T c ~19 K, 4 K higher than the bulk sample. Typical roof-top patterns can be observed in the MO images of thin films grown on LAO and YSZ, from which a large and homogeneous critical current density J c ~ 3 - 4 x 10⁶ A/cm² at 5 K was obtained. In this study, magnetic flux penetration measurement reveals that the current is almost isotropically distributed in the two thin films. Compared with bulk crystals, FeTe₀̣₅Se₀̣₅ thin film demonstrates not only higher T c , but also much larger J c , which is attractive for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comment on “Origin of Metallic States at the Heterointerface between the Band Insulators LaAlO3 and SrTiO3"

In a recent Letter, Yoshimatsu et al. [1] used soft x-ray photoemission to probe electronic structure at the buried epitaxial LaAlO3/SrTiO3(001) interface (LAO/STO). This system has been of significant recent interest because of reports of two-dimensional electron gas (2-DEG) behavior at the interface of two band insulators. Although oxygen vacancies in the STO can result in itinerant electrons, an intrinsic conducting layer appears to form, possibly originating with interface charge from LAO which allegedly alleviates the so-called “polar catastrophe” at the interface. The principal conclusions from [1] are: (i) there is no partially-reduced Ti at the interface, as expected if there is electron transfer from the LAO, and, (ii) band bending at the interface occurs and results in a quantum well which is populated with carriers in the case of the TiO2-terminated substrate, but not for the SrO-terminated substrate. While the first of these conclusions is defensible, the second is not.

36 MATERIALS SCIENCE↗

Cationic Disorder and Phase Segregation in LaAlO{sub 3}/SrTiO{sub 3} Heterointerfaces Evidenced by Medium-Energy Ion Spectroscopy

Medium-energy ion spectroscopy (MEIS) has been used to study the depth profile and deduce the distribution of possible cationic substitutions in LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) heterointerfaces. Analysis of La and Sr peaks in aligned and random MEIS spectra indicates that the surface layers of LAO on an STO substrate are not homogeneous and stoichiometric if the film thickness is less than 4 unit cell layers. This is possibly caused by a redistribution of La and Sr at the interface. Kelvin probe force microscopy reveals an inhomogeneous distribution of the surface potential in a 4 unit cell LAO film, indicating micrometer-sized regions of different compositions. Our findings provide a novel view on the microstructural origin of the electrically conductive interfaces.

36 MATERIALS SCIENCE↗

Microscopic signatures of yielding in concentrated nanoemulsions under large-amplitude oscillatory shear

Here, we report x-ray photon correlation spectroscopy (XPCS) experiments on a series of concentrated oil-in-water nanoemulsions with varying droplet volume fraction subjected to in situ steady-state large-amplitude oscillatory shear (LAOS). The shear strain causes periodic echoes in the x-ray speckle patterns that lead to peaks in the intensity autocorrelation function. Above an onset strain amplitude that depends on nanoemulsion concentration, the peaks become attenuated, signaling spatially heterogeneous, shear-induced droplet dynamics. These dynamics include irreversible re- arrangements among the droplets that occur in some regions of the nanoemulsions during a given shear cycle and residual strain-like displacements in those regions that do not re-arrange. The wave-vector dependence of the peak attenuation indicates a power-law distribution in the size of regions undergoing shear-induced rearrangement that is similar to that observed previously in LAOS-XPCS measurements on concentrated nanocolloidal gels. The values of the onset strains for re-arrangement correlate with the concentration-dependent macroscopic yielding behavior of the nanoemulsions. Specically, they occur below the strains at which the nanoemulsions become effectively uidized and, except for the lowest concentration nanoemulsion in the study, signicantly above the threshold strain for nonlinear rheological response.

36 MATERIALS SCIENCE↗

TU-H-CAMPUS-IeP1-04: Combined Organ Dose for Digital Subtraction Angiography and Computed Tomography Using Monte Carlo Simulation

Purpose: The purpose of this study was to evaluate the combined organ dose of digital subtraction angiography (DSA) and computed tomography (CT) using a Monte Carlo (MC) simulation on the abdominal intervention. Methods: The organ doses for DSA and CT were obtained with MC simulation and actual measurements using fluorescent-glass dosimeters at 7 abdominal portions in an Alderson-Rando phantom. DSA was performed from three directions: posterior anterior (PA), right anterior oblique (RAO), and left anterior oblique (LAO). The organ dose with MC simulation was compared with actual radiation dose measurements. Calculations for the MC simulation were carried out with the GMctdospp (IMPS, Germany) software based on the EGSnrc MC code. Finally, the combined organ dose for DSA and CT was calculated from the MC simulation using the X-ray conditions of a patient with a diagnosis of hepatocellular carcinoma. Results: For DSA from the PA direction, the organ doses for the actual measurements and MC simulation were 2.2 and 2.4 mGy/100 mAs at the liver, respectively, and 3.0 and 3.1 mGy/100 mAs at the spinal cord, while for CT, the organ doses were 15.2 and 15.1 mGy/100 mAs at the liver, and 14.6 and 13.5 mGy/100 mAs at the spinal cord. The maximum difference in organ dose between the actual measurements and the MC simulation was 11.0% of the spleen at PA, 8.2% of the spinal cord at RAO, and 6.1% of left kidney at LAO with DSA and 9.3% of the stomach with CT. The combined organ dose (4 DSAs and 6 CT scans) with the use of actual patient conditions was found to be 197.4 mGy for the liver and 205.1 mGy for the spinal cord. Conclusion: Our method makes it possible to accurately assess the organ dose to patients for abdominal intervention with combined DSA and CT.

60 APPLIED LIFE SCIENCES↗