Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAUNCH DATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

JPSS-1 VIIRS Pre-Launch Response Versus Scan Angle Testing and Performance

The Visible Infrared Imaging Radiometer Suite (VIIRS) instruments on-board both the Suomi National Polar-orbiting Partnership (S-NPP) and the first Joint Polar Satellite System (JPSS-1) spacecraft, with launch dates of October 2011 and December 2016 respectively, are cross-track scanners with an angular swath of +/-56.06 deg. A four-mirror Rotating Telescope Assembly (RTA) is used for scanning combined with a Half Angle Mirror (HAM) that directs light exiting from the RTA into the aft-optics. It has 14 Reflective Solar Bands (RSBs), seven Thermal Emissive Bands (TEBs) and a panchromatic Day Night Band (DNB). There are three internal calibration targets, the Solar Diffuser, the BlackBody and the Space View, that have fixed scan angles within the internal cavity of VIIRS. VIIRS has calibration requirements of 2% on RSB reflectance and as tight as 0.4% on TEB radiance that requires the sensor's gain change across the scan or Response Versus Scan angle (RVS) to be well quantified. A flow down of the top level calibration requirements put constraints on the characterization of the RVS to 0.2%-0.3% but there are no specified limitations on the magnitude of response change across scan. The RVS change across scan angle can vary significantly between bands with the RSBs having smaller changes of approximately 2% and some TEBs having approximately 10% variation. Within aband, the RVS has both detector and HAM side dependencies that vary across scan. Errors in the RVS characterization will contribute to image banding and striping artifacts if their magnitudes are above the noise level of the detectors. The RVS was characterized pre-launch for both S-NPP and JPSS-1 VIIRS and a comparison of the RVS curves between these two sensors will be discussed.

Moyer, David↗

An Evening with NASA Scientists and Engineers: A Senior Living Community Outreach Program

Introduction: An Evening with NASA Scientists and Engineers is an outreach program for senior living communities, where participants learn from and interact with a scientist or engineer in a virtual setting. Participants learn about NASA science and engineering through a behind-the-scenes look from the people who work at NASA. The program focuses on both the stories behind the discoveries and the stories behind the people. The audience tunes in to the events via the NASA Zoom Webinar platform, where they have the opportunity to ask questions throughout the approximately 30-minute program. By bringing the audience into the conversation, we build rapport and thus improve their connection with NASA. Overview: An Evening with NASA Scientists and Engineers began in September 2020 when we identified a need for outreach to this particular demographic, as senior living communities had been hit especially hard by the COVID-19 pandemic. The program covers a wide range of topics, including heliophysics, astrophysics, planetary science, Earth science, planetary defense, and more, depending on what is topically appropriate at the time, and occurs on a roughly monthly basis. Each interactive presentation is between 20-25 minutes with 5-10 minutes of dedicated Q&A. Future dates and topics may change depending on new developments to NASA missions and stories. Audience: As of December 2021, we have four regularly attending senior living communities, spanning the East Coast from New Hampshire to Florida, with each joining the overall program at various stages of its development. The ability to reach many different senior living communities is crucial so that a diversity of people may benefit from this program. The audience consists of seniors with varying experience and comprehension levels – some are very familiar with the sciences while others are simply curious to learn more. Residents tune in to each event from their individual rooms or from their larger community rooms. RiverWoods Exeter. The RiverWoods Exeter community was our initial audience who acted as our “guinea pig” to see how this program might be implemented and to work out any major issues. They are located in Exeter, NH but also have two additional campuses in Durham, NH and Manchester, NH, that joined us a few months into the program. Culpepper Garden. Our second community to join the program was Culpepper Garden, a senior living community in Arlington, VA that provides both independent and assisted living housing to low-income seniors. Edinburgh Square. Our third community, Edinburgh Square, connected with us after hearing about the program through Culpepper Garden. Edinburgh Square is an HUD-subsidized retirement community in Roanoke, VA that houses both seniors and those living with disabilities. Moonstruck Astronomy Club. The Moonstruck Astronomy Club consists of residents from the On Top of the World retirement community in Ocala, FL and was the latest senior living community to join us. NASA Zoom Webinar: An Evening with NASA Scientists and Engineers reaches numerous senior living communities through live presentations that we host using the NASA Zoom Webinar virtual platform. Participants are typically already familiar with the Zoom platform which enables a lower barrier to entry. A recording of each talk is added to a designated video playlist on the NASA STEM YouTube channel so that audiences worldwide may view them [1]. These recordings began with our April 1, 2021 presentation, as this was when NASA Zoom Webinar was implemented, thus enabling us to record each talk. Metrics: We record attendance numbers from the senior living communities for each event as well as those from YouTube views after the presentation recording is posted online. Depending on which communities tune in, typical attendance numbers are between 60-100 people. RiverWoods Exeter has the most regularly attending residents, with an average of 55 attendees per event. As of December 2021, we have hosted fourteen events, nine of which were recorded and posted to our designated NASA STEM YouTube Channel playlist. The nine recordings combined have roughly 4,000 YouTube views thus far, with specific videos seeing higher view counts around launch dates (e.g. NASA’s DART mission) and trending topics (e.g. JWST). A list of speakers, topics, and links to presentation recordings is shown in Table 1. Future Program Expansion: Thus far, we have been adding communities on an individual basis. To make this process more streamlined, we are looking into working with senior living community networks and organizations such as LeadingAge [2]. In this manner, we will be able to reach more communities while also making it easier to send and receive relevant information.

S L Tiedeken↗

Mission Capabilities of Ion Engines Using SNAP-8 Power Supplies

Mission performance capabilities of ion engines powered by the 30 kw and 60 kw SNAP-8 power supplies are compared for the following missions: a 24-hr equatorial satellite, a 100 n mi lunar satellite, a 500 n mi Mars satellite, a Mercury probe, and an out-of-the-ecliptic probe. The capabilities of arc- jet engines and chemical engines for the same missions are compared with those of the ion engines. The majority of the comparisons are for 8500-lb spacecraft which are boosted into a 300 n mi orbit by the Atlas-Centaur. Variations in initial orbit altitude, the use of actual launch dates rather than dates based on simplifying assumptions, and the combined use of chemical and electrical propulsion systems were also evaluated in terms of their effect on mission performance.

IONIC PROPULSION↗

The Explorer XVI Micrometeoroid Satellite: Description and Preliminary Results for the Period December 16, 1962 Through January 13, 1963

Explorer XVI (1962 Beta Chi l) data that have been analyzed for the period between December 16, 1962 (launch date), and January 13, 1963, indicate that the orbit achieved was close to the predicted orbit. Ten punctures of annealed 0.001-inch-thick beryllium-copper have been used to determine a puncture rate of 0.035 per square foot per day in this material. One puncture of a 0.002-inch-thick sample has also occurred in this period. A tentative evaluation of the puncture rate for the 0.001-inch beryllium-copper in terms of the rate for an equivalent thickness of aluminum has been attempted, and the result has been compared with two different puncture rate estimates. The three micrometeoroid impact detecting systems are operating. Counting rates for the high- and low-sensitivity systems were close to anticipated values near the end of one week. Two of the 0.001-inch-steel-covered grid detectors have been punctured, but none of the 0.003- or 0.006-inch-steel-covered grid detectors have indicated punctures. One of the cadmium sulfide cells indicates three punctures of the 0.00025-inch Mylar cover. None of the 0.002- or 0.003-inch-copper-wire cards have indicated a break in the period covered. Telemetry temperatures were initially higher than expected although they remained well within operating limits. Sensor temperatures have remained within the expected bounds.

Micrometeoroid↗

Satellite Situation Report

Satellite situation - source, launch date, orbital element, & transmitting frequency

SATELLITE COMMUNICATION↗

Optimum solar electric interplanetary mission opportunities from 1975 to 1990

A collection of optimum trajectory and spacecraft data is presented for unmanned interplanetary missions from 1975 to 1990 using solar electric propulsion. Data are presented for one-way flyby and orbiter missions from Earth to Venus, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto. The solar system model assumes planetary ephemerides which very closely approximate the true motion of the planets. Direct and indirect flight profiles are investigated. Data are presented for two representative flight times for each mission. The launch vehicle is the Titan 3 B (core)/Centaur, and a constant jet exhaust speed solar electric propulsion system having a specific mass of 30 kg/kw is completely optimized in terms of power level and jet exhaust speed to yield maximum net spacecraft mass. The hyperbolic excess speeds at departure and arrival and the launch date are optimized for each mission. For orbiter missions, a chemical retro stage is used to brake the spacecraft into a highly eccentric capture orbit about the target planet.

Mann, F. I.↗

Antenna and propagation studies for spacecraft systems: Addendum to preflight SL-1/SL-3 Skylab VHF ranging coverage (early and late TPI)

A preflight assessment is presented of the expected Skylab VHF ranging coverage for the rendezvous portion of the SL-1/SL-3 mission, assuming a 28 July 1973 launch date, for the alternative trajectory cases characterized by either an early TPI or a late TPI. In this assessment early TPI and late TPI are used to indicate a TPI maneuver occurring 10 minutes prior to or after the nominally scheduled TPI maneuver, respectively. The Saturn workshop (SWS) maintains a solar inertial (SI) attitude throughout rendezvous for both trajectory cases. The results summarized concern VHF ranging function performance during that period most likely to be affected by off-nominal TPI conditions, i.e., NSR (5:56 g.e.t.) to station keeping. Curves are presented which show the variation in received power levels on both spacecraft-to-spacecraft links from about 100 n.mi. range to CSM and SWS station keeping. Appropriate threshold levels are shown on these received power curves to indicate zero circuit margins for the ranging function.

Eisenhauer, D. R.↗

Optimization of multiple target electric propulsion trajectories.

Development of the mathematical basis for the generation of multiple target low-thrust trajectories. The unique trajectory shaping capabilities of electric propulsion make it ideally suited for modifying the path of the spacecraft to effect close encounters of selected asteroids with only slight penalties in performance. Each intermediate encounter with an asteroid involves the optimization of four parameters, the encounter time and the three components of the relative velocity at encounter. A second type of mission amenable to this analysis is that of asteroid or comet sample return missions. For missions of this type, both launch date and division of departure and return flight times are capable of being optimized. Use is made of the traditional calculus of variations to derive the necessary conditions that must be satisfied for both types of missions. In addition, examples are presented of both a Comet Encke rendezvous mission with multiple encounters of the asteroids Aschera and Alekto and also a sample return mission from the asteroid Flora.

Sauer, C. G., Jr.↗

Earth Observatory Satellite system definition study. Report no. 7: EOS system definition report

The design concept and operational aspects of the Earth Observatory Satellite (EOS) are presented. A table of the planned EOS missions is included to show the purpose of the mission, the instruments involved, and the launch date. The subjects considered in the analysis of the EOS development are: (1) system requirements, (2) design/cost trade methodology, (3) observatory design alternatives, (4) the data management system, (5) the design evaluation and preferred approach, (6) program cost compilation, (7) follow-on mission accommodation, and (8) space shuttle interfaces and utilization. Illustrations and block diagrams of the spacecraft configurations are provided.

Source record↗

Supplement to the 1975 report on active and planned spacecraft and experiments

A listing and brief description of spacecraft and experiments designed to update the January 1975 report on active and planned spacecraft and experiments to March 31, 1975 was presented. The information is given in two sections. In the first, spacecraft and experiments that have become known to NSSDC since the original report or that have changed significantly are described. In the second, an alphabetical listing is given for all spacecraft and experiments described in the first section and in the original report. It also updates status of operation and launch dates to March 31, 1975.

Horowitz, R.↗

Future exploration of Venus (post-Pioneer Venus 1978)

A comprehensive study was performed to determine the major scientific unknowns about the planet Venus to be expected in the post-Pioneer Venus 1978 time frame. Based on those results the desirability of future orbiters, atmospheric entry probes, balloons, and landers as vehicles to address the remaining scientific questions were studied. The recommended mission scenario includes a high resolution surface mapping radar orbiter mission for the 1981 launch opportunity, a multiple-lander mission for 1985 and either an atmospheric entry probe or balloon mission in 1988. All the proposed missions can be performed using proposed space shuttle upper stage boosters. Significant amounts of long-lead time supporting research and technology developments are required to be initiated in the near future to permit the recommended launch dates.

Colin, L.↗

EVAL system concept definition. Partial spacelab payload

The preliminary design of an earth-viewing spacelab payload, with accommodations shared by both NASA and ESA is addressed. Mission parameters for this flight include a launch date of September 1981, an inclination of 57 deg, and an orbital altitude of 325 km. A seven-day mission is planned. The NASA portion of this payload is assigned to the EVAL (Earth Viewing Applications Laboratory) program. The ESA complement is designed as a multiuser payload.

Source record↗

Satellite situation report, volume 17, no. 1

Space objects in orbit as well as those which decayed during the reporting period are listed. Data provided include international designation and catalog number, nation of source, launch date, and inclination, apogee and perigee. Transmitting frequencies for satellites being monitored by NASA space flight tracking and data network are given.

Source record↗

Satellite situation report, volume 17, no. 2

Space objects in orbit are listed as well as those which decayed during the reporting period. Data provided include international designation and catalog number, nation of source, launch date, and inclination, apogee and perigee. Transmitting frequencies for satellites being monitored by NASA space flight tracking and data network are given.

Source record↗

Satellite situation report, volume 17, no. 4

Space objects in orbit are listed as well as those which decayed during this reporting period. Data provided include international designation and catalog number, nation of source, launch date, inclination, apogee and perigee. Transmitting frequencies for satellites being monitored by NASA space flight tracking and data network are given.

Source record↗

Custom large scale integrated circuits for spaceborne SAR processors

The application of modern LSI technology to the development of a time-domain azimuth correlator for SAR processing is discussed. General design requirements for azimuth correlators for missions such as SEASAT-A, Venus orbital imaging radar (VOIR), and shuttle imaging radar (SIR) are summarized. Several azimuth correlator architectures that are suitable for implementation using custom LSI devices are described. Technical factors pertaining to selection of appropriate LSI technologies are discussed, and the maturity of alternative technologies for spacecraft applications are reported in the context of expected space mission launch dates. The preliminary design of a custom LSI time-domain azimuth correlator device (ACD) being developed for use in future SAR processors is detailed.

Tyree, V. C.↗

Halley comet rendezvous with a SEPS vehicle

An analysis of the performance of a Solar Electric Propulsion System (SEPS) vehicle rendezvousing with Halley's comet just prior to its Frebruary 1986 perihelion is described. A calculus of variations mathematical formulation is used to maximize Halley arrival mass while giving effect to the influence of solar array size, launch date, arrival date, and insertion hyperbolic excess velocity. Numerical sensitivity relief, thrust system modeling, trajectory characteristics and ion engine operating conditions are discussed and illustrated. Results indicate a rendezvous is feasible with a minimal advance in solar cell and ion engine technology.

Burrows, R. R.↗