SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A short summary of experimental and CFD results for lean blowout in a lean‐front‐end combustor (NASA7‐pointSV‐LDI) for four National Jet Fuels Combustion Program (NJFCP) fuels.
We develop the methodology of coupling two different computational fluid dynamic (CFD) codes, OpenNCC and Glenn-HT, in order to investigate the unsteady flow fields inside the combustor and around the first-stage stator of a high-pressure turbine (HPT) from the energy efficient engine (E 3 ) program. In our coupling strategy, OpenNCC, a time accurate unstructured mesh multi-phase combustion CFD code, is applied to the combustor region and Glenn-HT, a structured mesh CFD code designed for turbine applications, is utilized inside the HPT region. As a proof of concept, we first simulate the three-dimensional airflow over the backward facing step and compared the predicted pressure coefficient against experimental data. We then considered a Jet-A/Air combustor with the NASA single learn direct injector (LDI) as a reacting flow test case. Here, Glenn-HT is used in the downstream of the combustor and assumes that the working fluid is a single gas (i.e., air) where the properties of the gas are taken from time- and area-averaged values at the combustor exit. A fully coupled combustor-turbine simulation using both OpenNCC and Glenn-HT was conducted on the E 3 combustor and a detailed analysis done pertaining to how a realistic combustor outflow affects migration of hot-streaks and its impact on the aerodynamic behavior inside the HPT. It is found that the combustion dynamics (i.e., the switching main and pilot flame strength) significantly alters the aerodynamic behavior inside the HPT including hot-streak migration. Variations of the temperature and the velocity magnitude in the passage could be up to ±75 and ±15. These large variations are an important part of the combustor-turbine interactions, which are overlooked by a single component simulation of the HPT while imposing the steady inflow boundary condition at the HPT inlet. Finally, it is observed the strong density gradient associated with the hot-streaks and the pressure gradient at the passage significantly enhances the baroclinic torque, affecting the vorticity field.
Using the NASA 7-point lean direct injection (LDI) aero gas turbine combustor concept, the effect of fuel composition on lean blowout (LBO) was compared for three National Jet Fuel Combustion Program (NJFCP) fuels and one single-component fuel. The fuels were A-2, an "average" Jet-A with a derived cetane number (DCN) of 49; C-1, which consists primarily of C12 and C16 isoparaffins (Gevo ATJ), with a DCN of 16; C-4, which consists primarily of C9-C16 and C13 isoparaffins (Sasol IPK blended with Gevo), with a DCN of 28; and n-dodecane, with a DCN of 73.5;. Lean blowout was reached by increasing the air flow. Previously-reported results showed the air flow rate at LBO increased with increasing DCN. This presentation examines high speed flame images taken as the flame blew out.
This presentation is a brief summary of the data collected under a NASAFAA partnership test campaign completed in October 2016 in the NASA CE-5 test facility. The results discussed in this presentation are gaseous (NASA) and Particle (FAA).