Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEVELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

SODA Synthesizer: an Open-source, Multi-level, Modular, Extensible Compiler from High-level Frameworks to Silicon

The SODA Synthesizer is an open-source modular, end-to-end hardware compiler framework. The SODA frontend, developed in MLIR, performs system-level design, code partitioning, and high-level optimizations to prepare the specifications for the hardware synthesis. The backend is based on a state-of-the-art high-level synthesis tool, and generates the final hardware design. The backend can interface with logic synthesis tools for field programmable gate arrays or with commercial and open-source logic synthesis tools for application-specific integrated circuits. We discuss the opportunities and challenges in integrating with commercial and open-source tools both at the frontend and backend, and the unique opportunities that an open-source hardware design ecosystem provides.

Bohm Agostini, Nicolas↗
NASA NTRS1981

Low-level circulations induced by an upper-level jet in a fine mesh numerical model

Attention is given to varying the initial conditions in the Penn State three-dimensional numerical model in the development of the low-level jet over the Ohio Valley during the 10 May 1973 severe weather event. The results of two forecasts are summarized: (1) the control forecast which interpolated the National Meteorological Center's operational analysis to the mesoscale model grid; and (2) modifying the control forecast by inserting artificial soundings and surface observations. Enhancements are made on the basis of subsynoptic scale analyses by Uccellini and surface data. The results indicate that the low-level jet was in part induced by pressure changes associated with deceleration and horizontal divergence of air in the exit region of the upper-level jet. The enhancement of the initial moisture field using surface reports of clouds and precipitation has a substantial effect on precipitation.

Burkhart, R. P.↗
NASA NTRS1987

Synergistic interactions between an upper-level jet streak and diabatic processes that influence the development of a low-level jet and a secondary coastal cyclone

A series of numerical simulations of the February 1979 Presidents Day cyclone is presented. The development of the low-level jet (LLJ) associated with the cyclone is described, and the mesoscale numerical model, initial analyses, and experimental design used in the study are discussed. Four numerical simulations are discussed and compared, including an adiabatic simulation that isolates the development of upper-level divergence along the axis of a subtropical jet streak and three other simulations that reveal the contributions of sensible and latent heat release in modifying lower-tropospheric wind fields and reducing the sea-level pressure. The formation of the LLJ is described through an evaluation of trajectories derived from the various model simulations. The effect of the LLJ on secondary cyclogenesis along the East Coast is described.

Uccellini, Louis W.↗
NASA NTRS2019

Comparing Level-2 and Level-3 Satellite Ocean Color Retrieval Validation Methodologies

Many ocean color data applications leverage global spatially composited Level-3(L3) satellite data, because of their regular Earth-grid frame of reference. However, ocean color satellite retrieval performance is routinely evaluated on Level-2 (L2) data at the native satellite swath resolution and geometries. This study assesses how accurately binned and gridded L3 data represent L2 satellite data products via satellite-to-in situ match-up activities.L2 and L3 satellite data retrievals of the photosynthetic pigment chlorophyll-a are compared with a common in situ data set, revealing similar L2 and L3 satellite-to-in situ performance for both MODIS-Aqua and VIIRS-SNPP. This agreement implies that L2 validation results are generally applicable to L3 data. However, uncertainties are introduced during the generation of L3 data from L2 data. L3 data comparisons introduce a wider temporal window between the time of in situ measurement and the time of the satellite observation, which can unintentionally reflect on the quality of the satellite retrieval or algorithm performance. The choice of L3 map projection may introduce additional uncertainty by spatially distorting the true location of the satellite retrievals. Each manipulation of satellite data beyond theinstrument's native spatio temporal reference (L2) reduces the applicability of L2 validation results to higher data processing levels.

Ocean Color↗
NASA NTRS2021

Technology Readiness Level (TRL) as the foundation of Human Readiness Level (HRL)

As space programs became more complex, it became evident to NASA that a means of defining a methodological way to evaluate the maturity of technologies for spacecraft design was needed for risk assessment that could affect technical, cost and schedule. NASA first saw that infusing technology intoNASA programs required some means to assess technology maturity like flight readiness for a mission. Hence, a seven-point technology readiness level scale was developed in the mid-70s by a NASA researcher and later formally defined in 1989 (Sadin et al., 1989) that comprised of seven levels (See Table 1). These levels provided a definitive meaning of what complexity a research and technology development program should be followed. NASA recognized the approach as a useful way of an effective assessment of,and communication regarding the maturity of new technologies, using a simplistic figure of merit, the state of maturity of a technology-particularly, critical technology necessary to meet a mission/application objective

George Salazar↗
NASA NTRS2021

Technology Readiness Level as the Foundation of Human Readiness Level

Communication of the maturity of technology through the program/product life cycles helps enhance risk management from the beginning and support decision-making strategies for research, development, and allocation of resources. Currently, many organizations use the technology readiness level (TRL) as a simple metric to indicate the maturity of the technology. This article will discuss the TRL history, define the TRL levels, show how the TRL relates to the technology life cycle, and how the TRL framework contributes to the human readiness level (HRL) structure. Through the TRL advantages and disadvantages, this article will show how the TRL falls short in numerous areas of engineering, including the integration readiness of system/subsystem components and assessment of the readiness of the technology to operate within the human capabilities and limitations. Yet the article also shows how the TRL serves as the foundation for HRL.

George Salazar↗
DOE OSTI2015

Injection deep level transient spectroscopy: An improved method for measuring capture rates of hot carriers in semiconductors

An improved method for measuring the cross sections for carrier trapping at defects in semiconductors is described. This method, a variation of deep level transient spectroscopy (DLTS) used with bipolar transistors, is applied to hot carrier trapping at vacancy-oxygen, carbon-oxygen, and three charge states of divacancy centers (V{sub 2}) in n- and p-type silicon. Unlike standard DLTS, we fill traps by injecting carriers into the depletion region of a bipolar transistor diode using a pulse of forward bias current applied to the adjacent diode. We show that this technique is capable of accurately measuring a wide range of capture cross sections at varying electric fields due to the control of the carrier density it provides. Because this technique can be applied to a variety of carrier energy distributions, it should be valuable in modeling the effect of radiation-induced generation-recombination currents in bipolar devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Investigation of boundary-layer wind predictions during nocturnal low-level jet events using the Weather Research and Forecasting model

Simulations of two periods featuring three consecutive low level jet (LLJ) events in the US Upper Great Plains during the autumn of 2011 were conducted to explore the impacts of various setup configurations and physical process models on simulated flow parameters within the lowest 200 m above the surface, using the Weather Research and Forecasting (WRF) model. Sensitivities of simulated flow parameters to the horizontal and vertical grid spacing, planetary boundary layer (PBL) and land surface model (LSM) physics options, were assessed. Data from a Light Detection and Ranging (lidar) system, deployed to the Weather Forecast Improvement Project (WFIP; Finley et al. 2013) were used to evaluate the accuracy of simulated wind speed and direction at 80 m above the surface, as well as their vertical distributions between 120 and 40 m, covering the typical span of contemporary tall wind turbines. All of the simulations qualitatively captured the overall diurnal cycle of wind speed and stratification, producing LLJs during each overnight period, however large discrepancies occurred at certain times for each simulation in relation to the observations. 54-member ensembles encompassing changes of the above discussed configuration parameters displayed a wide range of simulated vertical distributions of wind speed and direction, and potential temperature, reflecting highly variable representations of stratification during the weakly stable overnight conditions. Root mean square error (RMSE) statistics show that different ensemble members performed better and worse in various simulated parameters at different times, with no clearly superior configuration . Simulations using a PBL parameterization designed specifically for the stable conditions investigated herein provided superior overall simulations of wind speed at 80 m, demonstrating the efficacy of targeting improvements of physical process models in areas of known deficiencies. However, the considerable magnitudes of the RMSE values of even the best performing simulations indicate ample opportunities for further improvements.

Mirocha, Jeff D.↗
DOE OSTI2019

Delineating Facies Spatial Distribution by Integrating Ensemble Data Assimilation and Indicator Geostatistics with Level-Set Transformation

The facies-based approach has been widely adopted to delineate an aquifer into distinct geological units with unique distributions of hydraulic, physical, and/or chemical properties. The recent development in ensemble-based data assimilation methods allows both the direct and indirect data to be used to improve facies delineation. A major difficulty in those applications is to honor the spatial continuity and avoid overfitting after data assimilation. We introduce a new facies delineation framework to integrate ensemble data assimilation with traditional transition probability-based geostatistics. A level-set concept is used to parametrize discrete facies indicators and for updating facies shape. During the iterative data assimilation process, we impose spatial continuity by conditioning facies field generation on points selected adaptively based on their sensitivity to observation data. This reconditioning step is a key step to maintain spatial continuity and overcome over-fitting problems in inversion. We selected two examples to evaluate the performance of the new framework in estimating facies-based permeability field. The first example is a two-dimensional synthetic system with transient head data induced by pumping tests used for delineating two facies. The second example is a three-dimensional case with three facies, conceptualized from a field tracer experiment within the Columbia River corridor in Washington State, USA. Both examples demonstrate that the new method can adequately capture the spatial pattern of hydrofacies with reconditioning, which leads to the improved prediction of system behaviors.

Song, Xuehang↗
DOE OSTI2015

Reduction of Fermi level pinning and recombination at polycrystalline CdTe surfaces by laser irradiation

Laser processing of polycrystalline CdTe is a promising approach that could potentially increase module manufacturing throughput while reducing capital expenditure costs. For these benefits to be realized, the basic effects of laser irradiation on CdTe must be ascertained. In this study, we utilize surface photovoltage spectroscopy (SPS) to investigate the changes to the electronic properties of the surface of polycrystalline CdTe solar cell stacks induced by continuous-wave laser annealing. The experimental data explained within a model consisting of two space charge regions, one at the CdTe/air interface and one at the CdTe/CdS junction, are used to interpret our SPS results. The frequency dependence and phase spectra of the SPS signal are also discussed. To support the SPS findings, low-temperature spectrally-resolved photoluminescence and time-resolved photoluminescence were also measured. The data show that a modest laser treatment of 250 W/cm{sup 2} with a dwell time of 20 s is sufficient to reduce the effects of Fermi level pinning at the surface due to surface defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2012

Underground Architecture and Layout for the Belgian High-Level and Long-Lived Intermediate-Level Radioactive Waste Disposal Facility- 12116

The underground architecture and layout of the proposed Belgian high-level (HLW) and long-lived, intermediate-level radioactive wastes (ILW-LL) disposal system (repository) is mainly based on lessons learned during the development and 30-year-long operation of an underground research laboratory (URL) ('HADES') located adjacent to the city of Mol at a depth of 225 m in a 100-m-thick, Tertiary clay formation; the Boom clay. The following main operational and safety challenges are addressed in the proposed architecture and layout: 1. Following excavation, the underground openings needed to be promptly supported to minimize the extent of the excavation damaged zone (EDZ). 2. The size and unsupported stand-up time at tunnel crossings/intersections also needed to be minimized to minimize the extent of the related EDZ. 3. Steel components had to be minimized to limit the related long-term (post-closure) corrosion and hydrogen production. 4. The shafts and all equipment had to go down through a 180-m-thick aquifer and handle up to 65-Ton payloads. 5. The shaft seals had to be placed in the underlying clay layer. The currently proposed layout minimizes the excavated volume based on strict long-term-safety criteria and optimizes operational safety. Operational safety is further enhanced by a remote-controlled waste-package-handling system transporting the waste packages from their respective surface location down to their respective disposal location with no intermediate operation. The related on-site preparation and thenceforth use of cement-based, waste package- transportation containers are integral operational-safety components. In addition to strengthening the waste packages and providing radiation protection, these containers also provide long-term corrosion protection of the internal 'primary' steel packages. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Application-level regression testing framework using Jenkins

Monitoring and testing for regression of large-scale systems such as the NCSA's Blue Waters supercomputer are challenging tasks. In this paper, we describe the solution we came up with to perform those tasks. The goal was to find an automated solution for running user-level regression tests to evaluate system usability and performance. Jenkins, an automation server software, was chosen for its versatility, large user base, and multitude of plugins including collecting data and plotting test results over time. We also describe our Jenkins deployment to launch and monitor jobs on remote HPC system, perform authentication with one-time password, and integrate with our LDAP server for its authorization. We show some use cases and describe our best practices for successfully using Jenkins as a user-level system-wide regression testing and monitoring framework for large supercomputer systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2014

Molecular-Level Insights into the Reactivity of Siloxane-Based Electrolytes at a Lithium-Metal Anode

A molecular-level understanding of the reactions that occur at the lithium-metal anode/electrolyte interphase is essential to improve the performance of Li–O2 batteries. Experimental and computational techniques are applied to explore the reactivity of tri(ethylene glycol)-substituted trimethylsilane (1NM3), a siloxane-based ether electrolyte, at the lithium-metal anode. In situ/ex situ X-ray diffraction and Fourier-transform infrared spectroscopy studies provide evidence of the formation of lithium hydroxide and lithium carbonates at the anode upon gradual degradation of the metallic lithium anode and the solvent molecules in the presence of oxygen. Density functional calculations performed to obtain a mechanistic understanding of the reductive decomposition of 1NM3 indicate that the decomposition does not require any apparent barrier to produce lithium hydroxide and lithium carbonates when the reduced 1NM3 solvent molecules interact with the oxygen crossing over from the cathode. This study indicates that degradation may be more significant in the case of the 1NM3 solvent, compared to linear ethers such as tetraglyme or dioxalone, because of its relatively high electron affinity. Also, both protection of the lithium metal and prevention of oxygen crossover to the anode are essential for minimizing electrolyte and anode decomposition.

Environmental Molecular Sciences Laboratory↗