Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGHT INTENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Optical Structural Health Monitoring Device

This non-destructive, optical fatigue detection and monitoring system relies on a small and unobtrusive light-scattering sensor that is installed on a component at the beginning of its life in order to periodically scan the component in situ. The method involves using a laser beam to scan the surface of the monitored component. The device scans a laser spot over a metal surface to which it is attached. As the laser beam scans the surface, disruptions in the surface cause increases in scattered light intensity. As the disruptions in the surface grow, they will cause the light to scatter more. Over time, the scattering intensities over the scanned line can be compared to detect changes in the metal surface to find cracks, crack precursors, or corrosion. This periodic monitoring of the surface can be used to indicate the degree of fatigue damage on a component and allow one to predict the remaining life and/or incipient mechanical failure of the monitored component. This wireless, compact device can operate for long periods under its own battery power and could one day use harvested power. The prototype device uses the popular open-source TinyOS operating system on an off-the-shelf Mica2 sensor mote, which allows wireless command and control through dynamically reconfigurable multi-node sensor networks. The small size and long life of this device could make it possible for the nodes to be installed and left in place over the course of years, and with wireless communication, data can be extracted from the nodes by operators without physical access to the devices. While a prototype has been demonstrated at the time of this reporting, further work is required in the system s development to take this technology into the field, especially to improve its power management and ruggedness. It should be possible to reduce the size and sensitivity as well. Establishment of better prognostic methods based on these data is also needed. The increase of surface roughness with fatigue is closely connected to the microstructure of the metal, and ongoing research is seeking to connect this observed evidence of the fatigue state with microstructural theories of fatigue evolution to allow more accurate prognosis of remaining component life. Plans are also being discussed for flight testing, perhaps on NASA s SOFIA platform.

Buckner, Benjamin D.↗
DOE OSTI2024

Nonphotochemical quenching kinetics GWAS in sorghum identifies genes that may play conserved roles in maize and Arabidopsis thaliana photoprotection

SUMMARY Photosynthetic organisms must cope with rapid fluctuations in light intensity. Nonphotochemical quenching (NPQ) enables the dissipation of excess light energy as heat under high light conditions, whereas its relaxation under low light maximizes photosynthetic productivity. We quantified variation in NPQ kinetics across a large sorghum ( Sorghum bicolor ) association panel in four environments, uncovering significant genetic control for NPQ. A genome‐wide association study (GWAS) confidently identified three unique regions in the sorghum genome associated with NPQ and suggestive associations in an additional 61 regions. We detected strong signals from the sorghum ortholog of Arabidopsis thaliana Suppressor Of Variegation 3 ( SVR3 ) involved in plastid–nucleus signaling. By integrating GWAS results for NPQ across maize ( Zea mays ) and sorghum‐association panels, we identified a second gene, Non‐yellowing 1 ( NYE1 ), originally studied by Gregor Mendel in pea ( Pisum sativum ) and involved in the degradation of photosynthetic pigments in light‐harvesting complexes. Analysis of nye1 insertion alleles in A. thaliana confirmed the effect of this gene on NPQ kinetics in eudicots. We extended our comparative genomics GWAS framework across the entire maize and sorghum genomes, identifying four additional loci involved in NPQ kinetics. These results provide a baseline for increasing the accuracy and speed of candidate gene identification for GWAS in species with high linkage disequilibrium.

Plant Sciences↗
NASA NTRS2001

Characterization of a Structural Transformation of Carbon Nanotube Materials by Raman Spectroscopy

Raman spectra of carbon nanotubes and carbon microstructure materials synthesized on Si substrates by pulsed laser vaporization have been measured in the range of 50/cm to 4500/cm with the excitation of He-Ne laser. It is found that the formation of nanotubes depends strongly on the growth temperatures and high quality multi-wall and single-wall nanotubes were produced at 700 and 990 C, respectively. The Raman spectra of one sample grown at 700 C were found to be dependent on the excitation intensity. The spectra of the sample suggest that the structure is similar to that of multi-wall nanotubes at low excitation intensity (2.5 kW/sq cm) and it converts to the structure of single-wall nanotubes at higher intensity (25 kW/sq cm). Measurements taken while cycling the light intensity indicate a reversible structural transition.

Cui, Y.↗
NASA NTRS2023

Natural sunlight-driven oxidation of Mn 2+ (aq) and heterogeneous formation of Mn oxides on hematite

The oxidation of dissolved Mn 2+ (aq) plays a critical role in driving manganese cycles and regulating the fate of essential elements and contaminants in environmental systems. Based on sluggish oxidation rate, abiotic processes have been considered less effective oxidation pathway for manganese oxidation in environmental systems. Interestingly, a recent study (Jung et al., 2021) has shown that the rapid photochemical oxidation of Mn 2+ (aq) could be a feasible scenario to uncover the potential significance of abiotic Mn 2+ (aq) oxidation. Nevertheless, the significance of photochemical oxidation of Mn 2+ (aq) under natural sunlight exposure remains unclear. Here, we demonstrate the rapid photocatalytic oxidation of Mn 2+ (aq) and the heterogeneous growth of tunnel-structured Mn oxides under simulated freshwater and seawater conditions in the presence of natural sunlight and hematite. The natural sunlight-driven photocatalytic oxidation of Mn 2+ (aq) by hematite showed kinetic constants of 1.02 h -−1 and 0.342 h −1 under freshwater and seawater conditions, respectively. The natural sunlight-driven photocatalytic oxidation rates are quite comparable to the results obtained from the previous laboratory test using artificial sunlight, which has ∼4.5 times stronger light intensity. It is likely because of ∼5.5 times larger light exposure area in the natural sunlight-driven photocatalytic oxidation than that of the laboratory test using artificial sunlight. We also elucidate the roles of cation species in controlling the oxidation rate of Mn 2+ (aq) and the crystalline structure of Mn oxide products. Specifically, in the presence of large amounts of cations, the oxidation rate of Mn 2+ (aq) was slower likely because of competitive adsorption. Furthermore, our findings highlight that Mn 2+ contributes significantly to the formation of large-tunneled Mn oxides. These results illuminate the importance of abiotic photocatalytic processes in controlling the redox chemistry of Mn in real environmental aqueous systems on the oxidation of Mn 2+ (aq), and provide an environmentally sustainable approach to effectively remediate water contaminated with Mn 2+ (aq) using natural sunlight.

Junyeong Choi↗
DOE OSTI2025

Influence of Supplementary Blue and Far-Red Light on the Morphology and Texture of Ocimum basilicum L. Grown in Controlled Environments

Basil (Ocimum basilicum L.) is highly sensitive to environmental conditions and is an ideal candidate for cultivation in controlled environment agriculture (CEA). Light-emitting diode technology has become essential in CEA, offering precise control over light intensity, spectrum, and duration. This study investigated how supplemental blue light, far-red light, or their combination influences basil biomass, morphology, texture, and color when added to a white + red light spectrum. Basil ’Prospera’ and ’Amethyst’ were exposed to five light treatments for 14–28 days: white + red at 180 µmol∙m−2∙s−1 (W) as the control, and four treatments with an additional 60 µmol∙m−2∙s−1 of either white + red (+W60), blue (+B60), far-red (+FR60), or a combination of B and FR (+B30+FR30), for a total photon flux density of 240 µmol∙m−2∙s−1. The results demonstrated that +B60 and +W60 light treatments increased leaf thickness by 17–20% compared to the +FR60 treatment. Conversely, texture analysis revealed that +FR60-treated leaves had higher puncture resistance, with ’Amethyst’ and ’Prospera’ requiring 1.57 ± 0.43 N and 1.45 ± 0.35 N of force, respectively, compared to 1.19 ± 0.32 N and 1.1 ± 0.21 N under +B60. These findings suggest that tailored light recipes in CEA can optimize basil quality, allowing growers to modify traits like leaf color, thickness, and toughness.

Oehler, Madison A. (ORCID:0000000297919667)↗
NASA NTRS2010

A Near-Infrared Spectrometer to Measure Zodiacal Light Absorption Spectrum

We have developed a high throughput infrared spectrometer for zodiacal light fraunhofer lines measurements. The instrument is based on a cryogenic dual silicon Fabry-Perot etalon which is designed to achieve high signal to noise Fraunhofer line profile measurements. Very large aperture silicon Fabry-Perot etalons and fast camera optics make these measurements possible. The results of the absorption line profile measurements will provide a model free measure of the zodiacal Light intensity in the near infrared. The knowledge of the zodiacal light brightness is crucial for accurate subtraction of zodiacal light foreground for accurate measure of the extragalactic background light after the subtraction of zodiacal light foreground. We present the final design of the instrument and the first results of its performance.

Kutyrev, A. S.↗
NASA NTRS2016

Hollow-Core Fiber Lamp

Hollow-core capillary discharge lamps on the millimeter or sub-millimeter scale are provided. The hollow-core capillary discharge lamps achieve an increased light intensity ratio between 194 millimeters (useful) and 254 millimeters (useless) light than conventional lamps. The capillary discharge lamps may include a cone to increase light output. Hollow-core photonic crystal fiber (HCPCF) may also be used.

Yi, Lin↗
NASA NTRS1997

Comparison of Light Emitting Diodes (LED) and Fluorescent Light on Suppression of Pineal Melatonin in the Rat

To validate a novel LED array for use in animal habitat lighting by comparing its effectiveness to cool-white fluorescent (CWF) lighting in suppressing pineal gland melatonin. Male Sprague-Dawley rats, 175-200 g, were maintained under control conditions for 2 weeks (food and water ad lib, 12L: 12D CWF, 18 uW/square cm). Dark adapted animals (animals before lights on) were exposed to 5 min of LED or CWF light of similar spectral power distribution. Two groups of rats (LED vs. CWF) were compared at 5 light intensities (100, 40, 1, 1.0, and 0. 1 lux). A control group was placed into the exposure apparatus but not exposed to light. After exposure, pineal glands were rapidly removed and assayed for melatonin by RIA. Results. The dark-exposed control groups matched with the 5 intensity groups (100, 40, 10, 1.0, and 0.1 lux) showed mean + SEM pineal melatonin values of 1167 +/- 136, 1569 +/- 126, 353 +/- 34, 650 +/- 124, and 464 +/- 85, pg/ml respectively. The corresponding CWF exposure data were 393 1 41, 365 +34, 257 +/- 13, 218 +/- 42, and 239 +/- 71 pg/ml, respectively. Corresponding LED exposure data were 439 +/- 25, 462 +/- 50, 231 +/- 6, 164 +/- 12, and 158 +/- 12 pg/ml, respectively. Rats exposed to both experimental light conditions at all illuminances studied showed significant melatonin suppression (p less than 0.01, ANOVA). In no case was the melatonin suppression induced by LED illuminance significantly different from the melatonin suppression elicited by the same intensity of CWF light. The results show that a novel LED light source can suppress pineal melatonin equal to that of a conventional CWF light source.

Winget, Charles M.↗
NASA NTRS1995

Laser Light Scattering by Shock Waves

Scattering of coherent light as it propagates parallel to a shock wave, formed in front of a bluff cylindrical body placed in a supersonic stream, is studied experimentally and numerically. Two incident optical fields are considered. First, a large diameter collimated beam is allowed to pass through the shock containing flow. The light intensity distribution in the resultant shadowgraph image, measured by a low light CCD camera, shows well-defined fringes upstream and downstream of the shadow cast by the shock. In the second situation, a narrow laser beam is brought to a grazing incidence on the shock and the scattered light, which appears as a diverging sheet from the point of interaction, is visualized and measured on a screen placed normal to the laser path. Experiments are conducted on shocks formed at various free-stream Mach numbers, M, and total pressures, P(sub 0). It is found that the widths of the shock shadows in a shadowgraph image become independent of M and P(sub 0) when plotted against the jump in the refractive index, (Delta)n, created across the shock. The total scattered light measured from the narrow laser beam and shock interaction also follows the same trend. In the numerical part of the study, the shock is assumed to be a 'phase object', which introduces phase difference between the upstream and downstream propagating parts of the light disturbances. For a given shape and (Delta)n of the bow shock the phase and amplitude modulations are first calculated by ray tracing. The wave front is then propagated to the screen using the Fresnet diffraction equation. The calculated intensity distribution, for both of the incident optical fields, shows good agreement with the experimental data.

Panda, J.↗
NASA NTRS1978

Overview of novel photovoltaic conversion techniques at high intensity levels

The paper describes several photovoltaic devices currently under development that can operate under light intensities considerably higher than can silicon solar cells. The technologies discussed include GaAs heteroface solar cells, multi-color systems, thermophotovoltaics, and laser energy conversion. Array costs for the GaAs and multi-color elements are estimated.

Stirn, R. J.↗
DOE OSTI2024

Metabolomics of related C3 and C4 Flaveria species indicate differences in the operation of photorespiration under fluctuating light

C 3 photosynthesis can be complemented with a C 4 carbon concentrating mechanism (CCM) to minimize photorespiratory losses. C 4 photosynthesis is often more efficient than C 3 under steady-state conditions. However, the C 4 CCM depends on inter-cellular metabolite concentration gradients, which must increase following increases in light intensity and could decrease rates of C 4 photosynthesis under fluctuating light. Additionally, incomplete flux through photorespiration could prove beneficial to C 4 assimilation during light induction of the CCM. Here, we compare metabolic profiles in the closely related C 3 Flaveria robusta and C 4 Flaveria bidentis during a light transient from low to high light to determine if these non-steady state accumulation patterns provide insight to the induction of the metabolite gradients needed to drive C 4 intermediate transport and if there is incomplete cycling of photorespiratory intermediates. In these C 3 and C 4 species, metabolite steady-state pool sizes suggest that C 4 transport acids maintain concentration gradients across the bundle sheath and mesophyll cell types under these light fluctuations. However, there was incomplete flux through photorespiration in the C 4 F. bidentis, which could reduce photorespiratory CO 2 loss via glycine decarboxylation and help maintain higher rates of assimilation during following induction periods.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1981

Solar tracking system

A solar tracker for a solar collector is described in detail. The collector is angularly oriented by a motor wherein the outputs of two side-by-side photodetectors are discriminated as to three ranges: a first corresponding to a low light or darkness condition; a second corresponding to light intensity lying in an intermediate range; and a third corresponding to light above an intermediate range, direct sunlight. The first output drives the motor to a selected maximum easterly angular position; the second enables the motor to be driven westerly at the Earth rotational rate; and the third output, the separate outputs of the two photodetectors, differentially controls the direction of rotation of the motor to effect actual tracking of the Sun.

White, P. R.↗
NASA NTRS1986

A study of pulse surface flashover in a vacuum

The prebreakdown phenomenon of pulsed surface flashover across solid insulators has been observed in a vacuum using image converter photography. A very good time and space resolution has been obtained. In summary, it was found that visible light (low luminosity) is initially emitted from the cathode and the light front propagates at a constant speed of approximately 1 X 10 to the 7th power ms. This low luminous light has a banded structure corresponding to the electron hopping distance as proposed in theoretical flashover models, and the light intensity gradually increases as it travels towards the anode. The bright light starts from the anode and expands towards the cathode, bridging the gap within 0.5 ns.

Lakdawala, Vishnukumar K.↗
NASA NTRS1990

Aerodynamics support of research instrument development

A new velocimetry system is currently being developed at NASA LaRC. The device, known as a Doppler global velocimeter (DGV), can record three velocity components within a plane simultaneously and in near real time. To make measurements the DGV, like many other velocimetry systems, relies on the scattering of light from numerous small particles in a flow field. The particles or seeds are illuminated by a sheet of laser light and viewed by two CCD cameras. The scattered light from the particles will have a frequency which is a function of the source laser light frequency, the viewing angle, and most importantly the seed velocities. By determining the scattered light intensity the velocity can be measured at all points within the light sheet simultaneously. Upon completion of DGV component construction and initial check out a series of tests in the Basic Aerodynamic Research (wind) Tunnel (BART) are scheduled to verify instrument operation and accuracy. If the results are satisfactory, application of the DGV to flight measurements on the F-18 High Alpha Research Vehicle (HARV) are planned. The DGV verification test in the BART facility will utilize a 75 degree swept delta wing model. A major task undertaken this summer included evaluation of previous results for this model. A specific series of tests matching exactly the previous tests and exploring new DGV capabilities were developed and suggested. Another task undertaken was to study DGV system installation possibilities in the F-18 HARV aircraft. In addition, a simple seeding system modification was developed and utilized to make Particle Imaging Velocimetry (PIV) measurements in the BART facility.

Miller, L. Scott↗
NASA NTRS2001

A Structural Transition of Carbon Nanotubes?

The superior properties of carbon nanotubes (CNT) are good for many applications. A possible temperature-related structural transition is found in the CNT, which may suggest new applications of CNT. CNT materials have been synthesized on Si substrates by pulsed laser vaporization in various temperatures and pressures. Raman spectroscopy and scanning electron microscopy are used to determine the CNT structure and morphology. It is found that the formation of nanotubes depends strongly on the growth temperatures and high quality multi-wall and single-wall nanotubes were produced at 700 and 990 C, respectively. The radial breath modes of Raman spectra measured in the range of 50 cm(exp -1) to 300 cm(exp -1), indicate that one of samples grown at 700 C is to be dependent on the excitation intensity. The spectra of the sample suggest that the structure is similar to that of multi-wall nanotubes at low excitation intensity (2.5 kW per square centimeter) and it converts to the structure of single-wall nanotubes at higher intensity (25 kW per square centimeter). Measurements taken while cycling the light intensity suggests a reversible transition.

Zhu, Shen↗
NASA NTRS2007

Solutions Network Formulation Report. Reducing Light Pollution in U.S. Coastal Regions Using the High Sensitivity Cameras on the SAC-C and Aquarius/SAC-D Satellites

Light pollution has significant adverse biological effects on humans, animals, and plants and has resulted in the loss of our ability to view the stars and planets of the universe. Over half of the U.S. population resides in coastal regions where it is no longer possible to see the stars and planets in the night sky. Forty percent of the entire U.S. population is never exposed to conditions dark enough for their eyes to convert to night vision capabilities. In coastal regions, urban lights shine far out to sea where they are augmented by the output from fishing boat, cruise ship and oil platform floodlights. The proposed candidate solution suggests using HSCs (high sensitivity cameras) onboard the SAC-C and Aquarius/SAC-D satellites to quantitatively evaluate light pollution at high spatial resolution. New products modeled after pre-existing, radiance-calibrated, global nighttime lights products would be integrated into a modified Garstang model where elevation, mountain screening, Rayleigh scattering, Mie scattering by aerosols, and atmospheric extinction along light paths and curvature of the Earth would be taken into account. Because the spatial resolution of the HSCs on SAC-C and the future Aquarius/SAC-D missions is greater than that provided by the DMSP (Defense Meteorological Satellite Program) OLS (Operational Linescan System) or VIIRS (Visible/Infrared Imager/Radiometer Suite), it may be possible to obtain more precise light intensity data for analytical DSSs and the subsequent reduction in coastal light pollution.

Andrews, Jane C.↗
NASA NTRS2012

Micro Ring Grating Spectrometer with Adjustable Aperture

A spectrometer includes a micro-ring grating device having coaxially-aligned ring gratings for diffracting incident light onto a target focal point, a detection device for detecting light intensity, one or more actuators, and an adjustable aperture device defining a circular aperture. The aperture circumscribes a target focal point, and directs a light to the detection device. The aperture device is selectively adjustable using the actuators to select a portion of a frequency band for transmission to the detection device. A method of detecting intensity of a selected band of incident light includes directing incident light onto coaxially-aligned ring gratings of a micro-ring grating device, and diffracting the selected band onto a target focal point using the ring gratings. The method includes using an actuator to adjust an aperture device and pass a selected portion of the frequency band to a detection device for measuring the intensity of the selected portion.

Park, Yeonjoon↗