Search NASA⌕ Search

SEARCH · Search NASA

Results for “Life Cycle Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

A Review of Battery Life-Cycle Analysis: State of Knowledge and Critical Needs

This report examines battery life-cycle assessments with a focus on cradle-to-gate (CTG) energy and greenhouse gas (GHG) and criteria emissions. This includes battery manufacturing and as the production of materials that make up batteries. The report covers both what is known about battery life cycles, as well as what needs to be established for better environmental evaluations.

25 ENERGY STORAGE↗

Energy, greenhouse gas, and water life cycle analysis of lithium carbonate and lithium hydroxide monohydrate from brine and ore resources and their use in lithium ion battery cathodes and lithium ion batteries

Life cycle analyses (LCAs) were conducted for battery-grade lithium carbonate (Li 2 CO 3 ) and lithium hydroxide monohydrate (LiOH·H 2 O) produced from Chilean brines (Salar de Atacama) and Australian spodumene ores. The LCA was also extended beyond the production of Li 2 CO 3 and LiOH·H 2 O to include battery cathode materials as well as full automotive traction batteries to observe the effect that the lithium production pathways had on these end products. The LCA here covers material, water, and energy flows associated with lithium acquisition; lithium concentration; production of lithium chemicals, battery cathode powders, and batteries; and associated transportation activities along the supply chain. Based on battery cathode material, the difference in lithium source represents a difference of up to 20% for NMC811 cathode greenhouse gases (GHGs) and up to 45% for NMC622 cathode GHGs. For full batteries, this represents a difference of up to 9% for NMC811 batteries and 20% for NMC622 batteries. Production of Li 2 CO 3 from brine-based resources had less life cycle GHG emissions and freshwater consumption per tonne of Li 2 CO 3 than Li 2 CO 3 from ore-based resources. And LiOH·H 2 O produced from brine-based lithium also had less life cycle GHG emissions and freshwater consumption per tonne of LiOH·H 2 O than LiOH·H 2 O from ore-based resources.

25 ENERGY STORAGE↗

Overview of Energy Life Cycle Analysis at NETL - LCAXVIII

This work was presented at the American Center for Life Cycle Assessment (ACLCA) LCAXVIII Conference in Fort Collins, CO on September 25, 2018. At NETL, LCA is used as a tool and framework for undertaking a broad range of evaluations. This overview describes the LCA process at NETL, including unique application of stochastic methods to environmental and economic analyses, and shows highlights from several recent studies.

Skone, Timothy J.↗

Overview of Energy Life Cycle Analysis at NETL - LCAXVI

This work was presented at the American Center for Life Cycle Assessment (ACLCA) LCAXVI Conference in Charleston, SC on September 27, 2016. At NETL, LCA is used as a tool and framework for undertaking a broad range of evaluations. This overview describes the LCA process at NETL, including unique application of stochastic methods to environmental and economic analyses, and shows highlights from several recent studies.

Skone, Timothy J.↗

Overview of Energy Life Cycle Analysis at NETL - LCAXVII

This work was presented at the American Center for Life Cycle Assessment (ACLCA) LCAXVIII Conference in Portsmouth, NH on October 5, 2017. At NETL, LCA is used as a tool and framework for undertaking a broad range of these types of evaluations. This overview describes the LCA process at NETL, including unique application of stochastic methods to environmental and economic analyses, and show highlights from several recent studies.

Skone, Timothy J.↗

A review of thermochemical upgrading of pyrolysis bio‐oil: Techno‐economic analysis, life cycle assessment, and technology readiness

Abstract Technologies for upgrading fast pyrolysis bio‐oil to drop‐in fuels and coproducts are under development and show promise for decarbonizing energy supply for transportation and chemicals markets. The successful commercialization of these fuels and the technologies deployed to produce them depend on production costs, scalability, and yield. To meet environmental regulations, pyrolysis‐based biofuels need to adhere to life cycle greenhouse gas intensity standards relative to their petroleum‐based counterparts. We review literature on fast pyrolysis bio‐oil upgrading and explore key metrics that influence their commercial viability through life cycle assessment (LCA) and techno‐economic analysis (TEA) methods together with technology readiness level (TRL) evaluation. We investigate the trade‐offs among economic, environmental, and technological metrics derived from these methods for individual technologies as a means of understanding their nearness to commercialization. Although the technologies reviewed have not attained commercial investment, some have been pilot tested. Predicting the projected performance at scale‐up through models can, with industrial experience, guide decision‐making to competitively meet energy policy goals. LCA and TEA methods that ensure consistent and reproducible models at a given TRL are needed to compare alternative technologies. This study highlights the importance of integrated analysis of multiple economic, environmental, and technological metrics for understanding performance prospects and barriers among early stage technologies.

09 BIOMASS FUELS↗

Life cycle analysis of gasification and Fischer-Tropsch conversion of municipal solid waste for transportation fuel production

Non-recyclable municipal solid waste (MSW) can be used as feedstock for liquid fuel production via gasification followed by Fischer-Tropsch (FT) processes. Given the heterogeneity of MSW material composition and variation in material properties, its convertibility to liquid hydrocarbon fuels could vary widely, affecting the sustainability of utilizing non-recyclable MSW for fuel production. This study evaluates the life cycle greenhouse gas (GHG) emissions (carbon intensities [CIs]) of FT fuels from non-recyclable MSW. Key issues that could greatly affect the CIs were examined, including fossil carbon content of the MSW, emission implications of diverting non-recyclable MSW from landfills to fuel production, and conversion efficiency. Results show that the CIs of fuels produced from various waste streams range 80–105 gCO2e/MJ, which may exceed the CI of petroleum fuels. Higher fossil carbon content in the MSW feedstock tends to incur higher GHG emissions as biogenic carbon emissions are considered carbon neutral. Meanwhile, diverting different fractions of non-recyclable MSW, such as food waste and low-quality paper, from landfills may result in GHG emissions that may include the potential avoidance of methane emissions and potential sequestration of biogenic carbon that is foregone. To reduce GHG emissions, a carbon capture and sequestration option in the fuel production stage is considered, which could reduce the CI by 53–64 gCO2e/MJ. Carbon fates of different non-recyclable MSW in landfills are further evaluated to determine how they vary and impact the CIs of MSW-derived fuels.

02 PETROLEUM↗

Techno-economic and life cycle analysis of synthetic natural gas production from low-carbon H 2 and point-source or atmospheric CO 2 in the United States

Synthetic natural gas (SNG) is of great interest in reducing fossil energy consumption while maintaining compatibility with existing NG infrastructure and end-use applications equipment. SNG can be produced using clean H 2 generated from renewable or nuclear energy and CO 2 captured from stationary sources or the atmosphere. In this study, we develop an engineering process model of SNG production using Aspen Plus® and production scales reported by the industry. We examine the levelized cost and life cycle greenhouse gas (GHG) emissions of SNG production under various CO 2 supply scenarios. Considering the higher cost of H 2 transportation compared with CO 2 transportation, we assume that CO 2 feedstock is transported via pipeline to the H 2 production location, which is collocated with the SNG plant. We also evaluate the cost of CO 2 captured from the atmosphere, assuming the direct air capture process can occur near the SNG facility. Depending on the CO 2 supply chain, the levelized cost of SNG is estimated to be in the range of $\$45–76$ per million British thermal units (MMBtu) on a higher heating value (HHV) basis. The SNG production cost may be reduced to $\$27–57$/MMBtu-HHV by applying a tax credit available in the United States for low-carbon H 2 production (45V). With a lower electricity price of 3¢/kWh for water electrolysis and accounting for a 45V tax credit, the SNG cost reaches parity with the cost of fossil NG. Depending on the CO 2 supply chain, SNG can reduce life cycle GHG emissions by 52–88% compared with fossil NG.

03 NATURAL GAS↗

Power Systems Life Cycle Analysis Tool (Power LCAT) [Poster]

The Power LCA Tool shows environmental and cost results for NETL's LCAs of power systems, including fossil and wind power. In addition to reporting results for costs and emissions, it allows trade-off analysis between costs and emissions. It also allows the user to evaluate the sensitivity of results to changes in key parameters..

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Using Life Cycle Analysis to Inform Energy Policy [Slides]

NETL uses LCA to understand the environmental burdens of energy systems and to inform policy makers. LCA is well suited for energy analysis, but its answers can change depending on what questions are being asked. NETL approaches all LCAs using a consistent method, which ensures comparability among LCAs. The granularity and flexibility of NETL's models makes it possible to identify key contributors to the environmental burdens of a system, as well as the ability to understand how results can change with changes to a given input parameter. In addition to understanding the attributes of a given energy technology, NETL can also perform consequential modeling that allows an understanding of how a given energy technology can affect the performance of other energy technologies. The effect of enhanced oil recovery (EOR) on conventional crude oil extraction is one example of such consequential analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Life Cycle Analysis of Natural Gas Extraction and Power Generation

Natural gas is considered a cleaner burning and more flexible alternative to other fossil fuels today. It is used in residential, commercial, industrial, and transportation applications in addition to having an expanding role in power production. However, the primary component of natural gas is methane, which is also a powerful greenhouse gas (GHG). Methane losses from natural gas extraction vary geographically and by extraction technology. This analysis inventories the GHG emissions from extraction, processing, and transmission of natural gas to large end users, and the combustion of that natural gas to produce electricity. In addition to GHG emissions, this analysis inventories other air emissions, water quality, water use, land use, and resource energy metrics.

03 NATURAL GAS↗

A review of battery life-cycle analysis : state of knowledge and critical needs.

A literature review and evaluation has been conducted on cradle-to-gate life-cycle inventory studies of lead-acid, nickel-cadmium, nickel-metal hydride, sodium-sulfur, and lithium-ion battery technologies. Data were sought that represent the production of battery constituent materials and battery manufacture and assembly. Life-cycle production data for many battery materials are available and usable, though some need updating. For the remaining battery materials, lifecycle data either are nonexistent or, in some cases, in need of updating. Although battery manufacturing processes have occasionally been well described, detailed quantitative information on energy and material flows is missing. For all but the lithium-ion batteries, enough constituent material production energy data are available to approximate material production energies for the batteries, though improved input data for some materials are needed. Due to the potential benefit of battery recycling and a scarcity of associated data, there is a critical need for life-cycle data on battery material recycling. Either on a per kilogram or per watt-hour capacity basis, lead-acid batteries have the lowest production energy, carbon dioxide emissions, and criteria pollutant emissions. Some process-related emissions are also reviewed in this report.

25 ENERGY STORAGE↗