Search NASA⌕ Search

SEARCH · Search NASA

Results for “MILITARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Evaluation of the Market Potential for DG SOFC Systems at Military Installations

The Department of Defense (DoD) is a major consumer of energy in the United States (U.S.) and is responsible for nearly 80 percent of U.S. government energy consumption. The DoD facility energy consumption profile reflects the U.S. commercial sector with electricity and natural gas accounting for nearly 80 percent of the energy consumed. The high-efficiency Solid Oxide Fuel Cell (SOFC) systems, which can support distributed generation (DG) and combined heat and power (CHP) applications, are well suited to support the DoD energy strategy and respond to the federal sustainability executive order. As a direct consequence of these policies, the DoD facility power sector was found to not only significantly supplement the early market opportunities for DG SOFC systems in the commercial sector, but also provide a significant longer-term market opportunity for commercial DG SOFC system developers. The DoD facilities power sector is capable of supporting the SOFC commercialization roadmap by providing increased production capacity that results in SOFC technology cost reduction. Apart from the expectation of typical readiness of commercially mature systems, there does not appear to be any significant issues that could hinder the market entry of SOFCs into the DoD facilities power sector. The expeditionary military bases, which are not considered in this report, provide yet another DoD market arena for DG SOFC systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Double exponential approximation and inverse double exponential fit for Bell Labs and International-Military Standard EMP waveforms

We summarize here the double exponential and inverse double exponential approximations for two common EMP waveforms, the Bell Laboratories (Bell Labs) and the International- military standard (IEC-MIL-STD). Both models have been used frequently due to their relatively easy analytical expressions for both the time domain waveforms and their associated frequency domain spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solar Ready Vets: Recruiting and Retaining Military Talent in the Solar Workforce

The solar industry stands to benefit from a more diverse, robust and resilient workforce as we continue to emerge from COVID19 disruptions and expand our industry’s role as a mainstream part of the American energy sector. Veterans and transitioning service members have strong leadership experience and critical thinking skills that make them outstanding candidates for solar careers in today’s fast-changing world. This session will inform solar companies about how they can engage with the U.S. Department of Energy funded Solar Ready Vets Network and the Solar Ready Vets Corporate Fellowship Program, which are expanding and strengthening a nationwide pipeline of transitioning military service members and veterans into technical and leadership roles in the American solar workforce.

14 SOLAR ENERGY↗

Demonstration of a Novel Technology to Manage Electricity Demand in Grid-Independent Military Microgrids

This research was conducted by the National Renewable Energy Laboratory (NREL) in collaboration with the S&C Electric Inc. through funding provided by the ESTCP. The project demonstrates use of cybersecure Automated Demand Response (ADR) technology to effectively manage microgrid loads during grid-independent, also known as "islanded," operation. When military microgrids become isolated from the main electrical grid, they are required to balance electricity supply and demand locally. Given that local generation may be constrained, the prevailing strategy involves shedding all but the most critical loads by tripping smart circuit breakers, which then necessitate manual resetting. This approach is generally implemented at the building level, which means that the buildings with mission-critical activities are exempt from load management and remain fully powered, whereas those deemed non-critical can experience a complete loss of service. In this research we developed a method that allows building automation systems to selectively control their assets in response to load shedding request from a microgrid controller, avoiding total loss of service in contrast to the conventional control approach. A commercial OpenADR client server by GridFabric is used for communication between the microgrid controller and the building management system (BMS). The microgrid controller monitors both generation capacity and various assets within the microgrid and issues a demand reduction request when necessary. This request is communicated to the OpenADR server via Modbus. Upon receiving the request, the OpenADR server forwards it to the BMS utilizing the OpenADR protocol. The BMS is pre-configured with various levels of load reduction strategies based on the controllable assets available, allowing for a nuanced approach to demand reduction. Both lab and field tests were performed that considered load shedding needed to achieve closed transition into island mode and to accommodate changing loads and power source availability while islanded. A commercial microgrid controller was used for these tests with normal programming within the expected constraints of the system capabilities. That is, the solution did not require any specialized modification to the code base of the controller. Given the latency of the round-trip communication path between the microgrid controller and the various devices involved with the load shed processes, there are certain scenarios for which the demonstrated solution are appropriate and some which are not. The methods described in this report can be used for load shedding/restoration during transitions between islanded and grid-tied modes of operation, as well as accommodating normal variations in load and the need to remove a power source from operation for maintenance. These methods should not be used for scenarios that require load shedding within a second or two such as sudden and unanticipated significant load increases or loss of power sources through equipment faults.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Effect of commercial and military performance requirements for transport category aircraft on space shuttle booster design and operation

The effect of two sets of performance requirements, commercial and military, on the design and operation of the space shuttle booster is evaluated. Critical thrust levels are established according to both sets of operating rules for the takeoff, cruise, and go-around flight modes, and the effect on engine requirements determined. Both flyback and ferry operations are considered. The impact of landing rules on potential shuttle flyback and ferry bases is evaluated. Factors affecting reserves are discussed, including winds, temperature, and nonstandard flight operations. Finally, a recommended set of operating rules is proposed for both flyback and ferry operations that allows adequate performance capability and safety margins without compromising design requirements for either flight phase.

Bithell, R. A.↗

The practical implementation of fatigue requirements to military aircraft and helicopters in the United Kingdom

The methods adopted in the United Kingdom to ensure the structural integrity of military aeroplanes and helicopters from the fatigue point of view are described. The procedure adopted from the writing of the specification to the monitoring of fatigue life in service are presented along with the requirements to be met and the way in which they are satisfied. Some of the outstanding problems that remain to be solved are indicated.

Maxwell, R. D. J.↗

Military usage of connectors

Military specifications with general purpose parameters and termination data covering flat connectors and flat cables are proposed. The material, design, coating, and insulation are discussed, and drafts of specifications for flat cables including quality assurance provisions, and inspection are presented.

Schade, R.↗

Military and aerospace applications of FCC

Military and NASA programs are discussed in which FCC were used. Included are Saturn 4, Pegasus satellites solar, array for Skylab orbital workshop, Poseidon missiles, MK 48 torpedo fire control, and Lunar Surveyor.

Swanson, C.↗

Conceptual design studies of lift/cruise fans for military transports

A study program for conceptual design studies of remote lift and lift/cruise fan systems to meet the requirements of military V/STOL aircraft was conducted. Parametric performance and design data are presented for fans covering a range of pressure ratios, including both single and two stage fan concepts. The gas generator selected for these fan systems was the J101-GE-100 engine. Noise generation and transient response were determined for selected fan systems.

Source record↗

Noise requirements from a military point of view

External and internal aircraft noise requirements are discussed in terms of application to military helicopters. The impact of the application of noise reduction technology to comply with FAA standards on cost and performance is emphasized.

Crawford, C. C., Jr.↗

Military needs for orbital power

Results of the DoD/ERDA (now Department of Energy) Space Power Study completed in October 1977 are presented. The major new thrust of Air Force Advanced Technology Plans center on the development of military solar power systems which will extend capabilities to the 10 - 50 KW sub e power range for new classes of missions while maintaining technology applicability to the 0.5 - 10 KW sub e present mission class. The status of FY78 efforts for Project 682J (Air Force Space Power Advanced Development Program) are reported. Project 682J is divided into the following tasks: (1) high efficiency solar panel; (2) nickel-hydrogen battery; (3) gallium arsenide solar concentrator hardness study; and (4) new-start nuclear dynamic power system applications/integration study.

Massie, L. D.↗

Effects of a military cargo pod and tail fins on the aerodynamic characteristics of a large wide-body transport model

Wind tunnel tests were conducted on a 0.03 scale model of a large wide-body commercial aircraft to determine the effects on the static aerodynamic characteristics resulting from the attachment of a belly pod for the long-range deployment of outsize military equipment. The effectiveness of horizontal-tip fins in augmenting directional stability was investigated. At a test Reynolds number of 1.08 x 1,000,000, the addition of the pod results in an increase in total drag of approximately 20 percent. Trim drag due to the pod is very small. Although the pod produces a significant decrease in directional stability, the addition of the tip fins restores some of the stability, particularly at the lower angles of attack.

Jernell, L. S.↗