Search NASA⌕ Search

SEARCH · Search NASA

Results for “MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of physical, chemical, and biological ageing on the mineralization of pine wood biochar by a Streptomyces isolate

If biochar is to be used for carbon (C) management, we must understand how weathering or ageing affects biochar C mineralization. Here, we incubated aged and unaged eastern white pine wood biochar produced at 350 and 550°C with a Streptomyces isolate, a putative biochar-decomposing microbe. Ageing was accelerated via three different processes, namely, (a) physical ageing–subjecting biochar to alternating freeze-thaw and wet-dry cycles, (b) chemical ageing–treating biochar with concentrated hydrogen peroxide and (c) biological ageing–incubating biochar in the presence of nutrients and microorganisms. Elemental composition and surface chemistry (Fourier Transform Infrared spectroscopy) of biochar samples were compared before and after ageing. Biochar C mineralization between ageing treatments was significantly different in the case of 350°C biochar ( p value = 0.03). Among the 350°C biochars, physical ageing resulted in the greatest increase (by 103%) in biochar C mineralization ( p value = 0.05). However, in the case of 550°C biochar, ageing did not result in a significant change in biochar C mineralization ( p value = 0.40). Biochar C mineralization was positively correlated with an increase in O/C ratio post-ageing ( r s = 0.86, p value = 0.01). In the case of 350°C biochar, surface oxidation during ageing enhanced biochar degradation by the isolate. For 550°C biochar, however, ageing did not significantly increase biochar C mineralization, likely due to high condensed aromatic C content and lower surface oxidation during ageing. The results from our study suggest that low temperature aged biochar is more susceptible to biological degradation by soil microbes. These findings have implications for the use of biochar for long term C storage in soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effects of Fe(III) Oxide Mineralogy and Phosphate on Fe(II) Secondary Mineral Formation during Microbial Iron Reduction

The bioreduction of Fe(III) oxides by dissimilatory iron-reducing bacteria may result in the formation of a suite of Fe(II)-bearing secondary minerals, including magnetite (a mixed Fe(II)/Fe(III) oxide), siderite (Fe(II) carbonate), vivianite (Fe(II) phosphate), chukanovite (ferrous hydroxy carbonate), and green rusts (mixed Fe(II)/Fe(III) hydroxides). In an effort to better understand the factors controlling the formation of specific Fe(II)-bearing secondary minerals, we examined the effects of Fe(III) oxide mineralogy, phosphate concentration, and the availability of an electron shuttle (9,10-anthraquinone-2,6-disulfonate, AQDS) on the bioreduction of a series of Fe(III) oxides (akaganeite, feroxyhyte, ferric green rust, ferrihydrite, goethite, hematite, and lepidocrocite) by Shewanella putrefaciens CN32, and the resulting formation of secondary minerals, as determined by X-ray diffraction, Mössbauer spectroscopy, and scanning electron microscopy. The overall extent of Fe(II) production was highly dependent on the type of Fe(III) oxide provided. With the exception of hematite, AQDS enhanced the rate of Fe(II) production; however, the presence of AQDS did not always lead to an increase in the overall extent of Fe(II) production and did not affect the types of Fe(II)-bearing secondary minerals that formed. The effects of the presence of phosphate on the rate and extent of Fe(II) production were variable among the Fe(III) oxides, but in general, the highest loadings of phosphate resulted in decreased rates of Fe(II) production, but ultimately higher levels of Fe(II) than in the absence of phosphate. In addition, phosphate concentration had a pronounced effect on the types of secondary minerals that formed; magnetite and chukanovite formed at phosphate concentrations of ≤1 mM (ferrihydrite), <~100 µM (lepidocrocite), 500 µM (feroxyhyte and ferric green rust), while green rust, or green rust and vivianite, formed at phosphate concentrations of 10 mM (ferrihydrite), ≥100 µM (lepidocrocite), and 5 mM (feroxyhyte and ferric green rust). These results further demonstrate that the bioreduction of Fe(III) oxides, and accompanying Fe(II)-bearing secondary mineral formation, is controlled by a complex interplay of mineralogical, geochemical, and microbiological factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural and Mechanical Analysis of Individual Mineralized Collagen Fibrils Using In Situ Transmission Electron Microscopy

Bone serves as an example of nature’s architectured material with its characteristic blend of strength and toughness, all at a lightweight design. Given the hierarchical nature of these materials, it is essential to understand the governing mechanisms and organization of their constituents across length scales for bioinspired structural design. Despite recent advances in transmission electron microscopy (TEM) that have allowed us to witness the hierarchical arrangement of bone at micro-down to the nanoscale, we are still missing the details about the structural organization and mechanical properties of the main building blocks of bone─mineralized collagen fibrils (MCFs). Here, we present a method to extract individual MCFs from nature’s model material, mineralized turkey leg tendon, using a dropcasting procedure. By isolating the MCFs onto TEM supporting grids, we visualized the arrangement of organic and mineral phases within individual MCFs at the nanoscale. Using a four-dimensional scanning transmission electron microscopy (4D-STEM) approach, the orientation of individual mineral crystals within the MCFs was examined. Furthermore, we conducted in situ tensile experiments, revealing exceptional tensile strains of at least 8%, demonstrating the intricate relationship between structural organization and the mechanical behavior of MCFs. These insights into the ultrastructure of mineralized tissue building blocks, as well as the proposed sample-extraction method compatible with in situ mechanical testing, provide a strong basis for research into nature-inspired material design.

4D-STEM↗
DOE OSTI2022

Direct Air Capture and Sequestration of CO 2 by Accelerated Indirect Aqueous Mineral Carbonation under Ambient Conditions

Mineralization of gaseous carbon dioxide into solid carbonates using alkaline industrial residues such as coal fly ash has a dual advantage of reducing the carbon dioxide footprint of coal power plants and improving ash utilization. However, the slow mineral carbonation rate under atmospheric conditions is a major challenge, especially when using natural minerals or industrial residues for direct air capture (DAC) of CO 2 . In this study, using coal fly ash samples and concentrated alkali carbonate aqueous solutions as a recyclable solvent, we show the feasibility of coupling mineral carbonation with DAC under atmospheric conditions. Findings show that carbonation efficiency is best under alkaline conditions, achieving as high as ~80% conversion to calcium carbonates within 1 h in a 1.9 M sodium carbonate solution. Based on the experimental results, a process coupling DAC and mineral carbonation that operates entirely under ambient conditions is proposed. Here, the techno-economic and life cycle assessments for the proposed process project a levelized cost of $\$116$–133/t-CO 2 -sequestered (US $\$2019$) and process carbon emissions (GWP) in the range of 0.03–0.25 t-CO 2 e/t-CO 2 -sequestered. Considering the low cost, simplicity, and gigaton-scale sequestration potential, we believe that DAC based on alkaline industrial residue carbonation can be considered a “low-hanging fruit” in the pursuit of negative emissions to combat climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Carbon ore, rare earth, and critical minerals (core-cm) assessment of san juan and raton coal basins: what is the future potential of coal in the san juan and raton basins, new mexico and colorado

This report summarizes results from the CORE-CM project in the San Juan and Raton basins of New Mexico and Colorado and ultimately begins to address what is the future of coal in the San Juan and Raton basins. The objective of this project was to determine the nonfuel carbon-based products (CBP), critical minerals, and rare earth elements (REE) potential in coal and related stratigraphic units in the San Juan and Raton basins and adjacent areas. This project delineated favorable geologic terrains and priority areas containing potential CBP, critical minerals, and REE deposits for the DOE mandate, which also is a priority of the NMBGMR and state of New Mexico. This project is important to the state because CBP, critical minerals, and REE resources must be identified before land use decisions are made by government officials. Future mining of CBP, critical minerals, and REE will directly benefit the economy of New Mexico. Furthermore, it is crucial to re-establish a domestic source of critical minerals and REE in the U.S. to help secure the nation’s clean energy future, to reduce the vulnerability of the U.S. to material shortages related to national defense, and to maintain our global technical and economic competitiveness. In addition to these benefits, students at New Mexico Institute of Mining and Technology (NMT) and San

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Effects of Microbial-Mineral Interactions on Organic Carbon Stabilization in a Ponderosa Pine Root Zone: A Micro-Scale Approach

Soil microbial communities affect the formation of micro-scale mineral-associated organic matter (MAOM) where complex processes, including adhesion, aggregate formation, microbial mineral weathering and soil organic matter stabilization occur in a narrow zone of large biogeochemical gradients. Here we designed a field study to examine carbon stabilization mechanisms by using in-growth mesh bags containing biotite that were placed in a ponderosa pine root zone for 6 months and compared to the surrounding bulk soil. We sought to determine the composition of the microbial community in the mesh bags compared to the surrounding soils, analyze the direct interactions between microbes and biotite, and finally identify the nature of the newly formed MAOM within the mesh-bags. Our results revealed that minerals in the mesh bags were colonized by a microbial community that produced organic matter in situ. The 16S rRNA gene sequencing and ITS2 region characterization showed phylogenetic similarity between the mesh bag and bulk soil archaea/bacteria and fungi microbiomes, with significant differences in alpha- and beta-diversity and species abundances. Organic matter pools in the mesh bags, analyzed by Fourier transform ion cyclotron resonance mass spectrometry, contained protein- (peptides) and lipid-like compounds while the bulk soil OM was comprised of lignin-like and carboxyl-rich alicyclic molecules. These results support that the newly formed biotite associated organic compounds have a microbial signature in the mesh bags. High-resolution electron microscopy documented strongly adhered organic compounds to biotite surfaces, formation of microaggregates, elemental uptake at the microbe (organic matter)-mineral interface, and distortion of biotite layers. Overall, this study shows the direct and indirect involvement of soil microbial communities from the root zone of ponderosa pine in the formation of MAOM, soil organic carbon stabilization, microaggregation, and mineral weathering at micro- and nano-scales.

58 GEOSCIENCES↗
DOE OSTI2024

Phosphorus recycling by mineral-catalyzed ribonucleotide cleavage on iron and manganese oxides

Abstract Phosphorus is an essential element influencing both food security via plant fertilization, and water pollution through excessive phosphorus use, yet the phosphorus cycle in ecosystems is poorly known. In particular, beyond adsorption, the role of iron and manganese oxides in catalyzing the abiotic dephosphorylation of biomolecules is debated. Here, we studied the reactions of ribonucleotides, containing different phosphate bonding, with goethite, hematite, and birnessite. We employed both high-resolution mass spectrometry of solution species and molecular modeling simulations of ribonucleotide-mineral complexes. Results disclose an up to fivefold preferential hydrolytic cleavage of a phosphoanhydride bond over a phosphoester bond, indicating that mineral-catalyzed reactions reflect the hierarchy reported for the activity of phosphatase enzymes. The fourfold higher catalytic reactivity of goethite and birnessite versus hematite is explained by mineral-specific binding rather than surface area differences. Corresponding simulated adsorbate conformations at the water–mineral interfaces are proposed. Overall, our findings provide new insights on the catalytic recycling of organic phosphorus species by mineral oxides.

58 GEOSCIENCES↗
DOE OSTI2022

Metal (Fe, Cu, and As) transformation and association within secondary minerals in neutralized acid mine drainage characterized using X-ray absorption spectroscopy

The formation and transformation of secondary minerals in areas affected by neutralized acid mine drainage (AMD) determine the behavior of toxic elements. To better understand the binding form of toxic elements in the secondary minerals, we focused on the distribution of secondary precipitates and heavy metals in neutralized AMD near a typical Cu-polymetallic deposit located in central Tibet. Compared to background values, the average heavy metal (As, Cu, Co, Cu, Mo, Pb, and Zn) content is higher in sediments close to the neutralized AMD drain. X-ray absorption spectroscopy (XAS) characterization shows the Fe in the suspended particulate matter (SPM) first aggregate as small Fe(III) octahedra clusters and then precipitate as ferrihydrite along the river. The XAS results also show the by-products of neutralization-ferrihydrite and sulfate-are the primary forms of Fe and S in the sediments, respectively. Gypsum retains Cu in the sediments via structural fixation, surface adsorption, and surface coprecipitation. The difference of Cu-O coordination number between the SPM and the sediments reveals the Cu sulfate coprecipitation on the surface of gypsum accompanied by SPM transporting along the river. XAS results confirm that ferrihydrite act as an essential sink for heavy metals, especially As. As (III) mineral in the sediment near the neutralized AMD outfall is dissolved and oxidized to arsenate downstream, which then adsorb to ferrihydrite and/or form As(V)-Fe minerals along the river. Gypsum and ferrihydrite have the potential to release heavy metals with changes in water chemistry, which may pose a threat to the safety of drinking water for downstream residents. These results deepen the understanding of the influence of secondary minerals (especially gypsum and ferrihydrite) on the migration and transformation process of heavy metal pollutants in mine drainage system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Priming mechanisms providing plants and microbes access to mineral-associated organic matter

Mineral-associated organic matter (MAOM) is considered a stable reservoir for soil nutrients that influences long-term soil carbon (C) and nitrogen (N) dynamics. However, recent experimental and theoretical evidence shows that root exudates may mobilize MAOM, thereby providing plants and microbes access to a large and N-rich pool. Given the mechanisms underlying MAOM C and N mobilization remain largely untested, we examined direct and indirect pathways by which root exudates destabilize this nutrient pool in laboratory mesocosms. We simulated root exudation with 13 C-labeled oxalic acid to test whether root exudates are directly capable of mobilizing MAOM from mineral surfaces; and with 13 C-labeled glucose to test whether indirect stimulation of microbial and extracellular enzyme activity leads to MAOM decomposition. We also tested the potential for oxalic acid and glucose to mobilize MAOM in an additional subset of sterilized soils to clarify the potential for non-microbial pathways of MAOM destabilization. Over the course of the 12-day MAOM incubation with and without simulated exudates, we measured C cycling (CO 2 respiration rates, 13 C–CO 2 efflux), N cycling (inorganic N pools, gross N mineralization) and related microbial processes (enzyme activities and microbial community composition via phospholipid fatty acid analysis). Both of the simulated root exudates enhanced MAOM-C mineralization, with cumulative respiration increasing 35–89% relative to the water-only control. Likewise, glucose additions enhanced the production of an exo-cellulase and a chitinase by up to 130% and 39%, respectively, while oxalic acid enhanced oxidative enzyme activities up to 91% greater than control rates. We observed a positive association between glucose-induced shifts in enzyme activities, MAOM-C mineralization, and gross ammonification. Oxalic acid additions were associated with initial increases in fungal relative abundance and in sterile soils appeared to stimulate the release of metals and dissolved organic nitrogen into exchangeable pools. Our results indicate that common root exudates, like glucose and oxalic acid, can significantly increase the turnover and potential release of C and N from MAOM through indirect (e.g., enzyme induction) and direct (e.g., mobilization of metal oxides) mechanisms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Mineralization of alkaline waste for CCUS

Ex-situ mineralization processes leverage the reaction of alkaline materials with CO 2 to form solid carbonate minerals for carbon capture, utilization, and storage. Annually, enough alkaline waste is generated to reduce global CO 2 emissions by a significant percentage via mineralization. However, while the reaction is thermodynamically favorable and occurs spontaneously, it is kinetically limited. Thus, a number of techniques have emerged to increase the efficiency of mineralization to achieve a scalable process. In this review, we discuss mineralization of waste streams with significant potential to scale to high levels of CO 2 sequestration. Focus is placed on the effect of operating parameters on carbonation kinetics and efficiency, methods, cost, and current scale of technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

An integrated experimental–modeling approach to identify key processes for carbon mineralization in fractured mafic and ultramafic rocks

Abstract Controlling atmospheric warming requires immediate reduction of carbon dioxide (CO2) emissions, as well as the active removal and sequestration of CO2 from current point sources. One promising proposed strategy to reduce atmospheric CO2 levels is geologic carbon sequestration (GCS), where CO2 is injected into the subsurface and reacts with the formation to precipitate carbonate minerals. Rapid mineralization has recently been reported for field tests in mafic and ultramafic rocks. However, unlike saline aquifers and depleted oil and gas reservoirs historically considered for GCS, these formations can have extremely low porosities and permeabilities, limiting storage volumes and reactive mineral surfaces to the preexisting fracture network. As a result, coupling between geochemical interactions and the fracture network evolution is a critical component of long-term, sustainable carbon storage. In this paper, we summarize recent advances in integrating experimental and modeling approaches to determine the first-order processes for carbon mineralization in a fractured mafic/ultramafic rock system. We observe the critical role of fracture aperture, flow, and surface characteristics in controlling the quantity, identity, and morphology of secondary precipitates and present where the influence of these factors can be reflected in newly developed thermo-hydro-mechanical–chemical models. Our findings provide a roadmap for future work on carbon mineralization, as we present the most important system components and key challenges that we are overcoming to enable GCS in mafic and ultramafic rocks.

58 GEOSCIENCES↗
DOE OSTI2023

Coso Geothermal Spectral Library for Rocks and Minerals

An integrated open mineral spectral library designed to enhance the utility and precision of mineral spectral data for geothermal exploration, developed from a reliable and comprehensive digital dataset for seamless sharing by integrating field data, the USGS spectral library, and pertinent information obtained from Coso geothermal field (Coso) in California. The ASD FieldSpec portable spectrometer was utilized for collecting spectral data, which was subsequently analyzed using the THOR Material Identification tool in ENVI, The Spectral Geologist (TSG) software by CSIRO, and the Fully Constrained Linear Spectral Unmixing algorithm (FCLSU) in MATLAB. Scanning Electron Microscopy (SEM) with a mineralogy-analyzing function was employed to assess the mineral composition of samples, ensuring precise mineralogical analysis. A portable X-ray fluorescence (pXRF) spectrometer was also utilized to gather information on elemental enrichment. A framework for developing spectra data and establishing spectral libraries for various geological cases was proposed within this study. The characteristic spectra of six alteration minerals - alunite, chalcedony, epidote, hematite, kaolinite, and opal - were acquired from Coso samples. The spectral library for the Coso alteration minerals was introduced for further application in academic study or industrial exploration. To browse the Coso Geothermal Spectral data and related figures from spreadsheets: #1 Unzip and store the following items in the same folder. 'Contact Probe Data.zip', 'Sample Photos.zip', and 'Coso spectra of higher-certainity minerals.xlsx'. #2 Open 'Coso spectra of higher-certainity minerals.xlsx'. The hyperlinks in the spreadsheet lead to the folders or figures of: spectra .asd file, spectra ASC II file, spectra plots, and sample photos. The spectra data is raw data without splice correction. Spectra .asd files require particular software to open. (These cannot be opened in GIS software such as ArcGIS.) Spectra ASC II files can be opened in a text editor or spread sheet program.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Mapping Support for Targeted Critical Minerals Exploration and Extraction

The United States’ dependency on imported minerals poses significant risks to economic stability and national security due to potential supply disruptions. Recognizing the strategic importance of critical minerals, the Department of Energy (DOE) emphasizes the need for a secure and resilient supply chain to support emissions reduction, technology development, and capitalization on clean energy opportunities. The DOE’s Office of Manufacturing and Energy Supply Chains (MESC), in collaboration with the Office of Policy (OP), addresses these vulnerabilities by focusing on upstream domestic critical minerals production, balancing extraction with social and environmental goals, including conservation, environmental justice, and respect for Tribal sovereignty. This report showcases a collaborative effort involving Idaho National Laboratory (INL), Argonne National Laboratory (Argonne), National Renewable Energy Laboratory (NREL), and the U.S. Geological Survey (USGS) to map mineral development potential along with key social and environmental datasets. A geographical information system (GIS)-based web map application was developed as a preliminary tool for environmental analysis, integrating 158 geospatial data layers such as critical habitat, land ownership, economic indicators, and environmental concerns. Data were sourced from agencies like the Bureau of Land Management (BLM) and USGS and processed using GIS technology to enhance visualization and analysis. The proposed analysis framework categorizes areas into high, mid, and low concern based on withdrawn lands, special status species, the Economic Development Capacity Index (EDCI) Mining Composite Index, and the Climate and Economic Justice Screening Tool (CEJST). While the application provides broad visualizations, it is not a substitute for detailed environmental reviews required under the National Environmental Policy Act (NEPA). Users must conduct further analyses and engage with tribal entities and other stakeholders for comprehensive planning. A case study of the Idaho Cobalt Belt (ICB) in Lemhi County, Idaho, has been provided in the report to illustrate the tool's practical use. This report introduces a GIS application and framework to support stakeholders in identifying and prioritizing areas for critical mineral exploration, promoting secure supply chains, and advancing the nation's energy independence through responsible resource stewardship.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Micro- and nano-scale techniques to explore bacteria and fungi interactions with silicate minerals

Biogeochemical interfaces such as bacteria-mineral, fungi-mineral, and water-mineral are hot spots for important processes and reactions in all environments. Studying these interfaces are useful over a range of spatial and temporal scales in order to understand elemental cycles, soil formation, restoration, and bioremediation. Advancement of micro- and nano-scale techniques lead to new discoveries about reactions and interactions at the heterogeneous interface of bacteria, fungi, and minerals. The current state-of-art of analytical techniques allows to study solid, liquid, and gas phases and their interactions with biological components and often permits simultaneous study of chemical and physical properties in a site-specific manner. Improved techniques not only increased spatial and temporal resolution with site specificity but also decreased sample preparation, artifact generation, sample size requirements and analytical time. There are limitations and challenges that still need to be overcome while studying the very heterogeneous microbe-mineral interface, but improved accessibility to beam time at the synchrotron facilities and instrument time at the user laboratories offer some solutions. This review chapter focuses on a subset of the available micro- and nano-scale techniques: electron and atomic force microscopy, and X-ray based spectroscopy of traditional and synchrotron-based applications.

Slicate minerals, microscopy, microbes↗
DOE OSTI2025

Accumulation of Soil Microbial Necromass Controlled by Microbe–Mineral Interactions

Soil organic matter (SOM) is a key reservoir for global carbon (C), supporting soil fertility and influencing greenhouse gas emissions. Microbial residues, composed of dead cells and cellular fragments, are major contributors to SOM formation. Yet, mechanisms by which minerals enhance the accumulation of microbial residues remain poorly understood. Here, we used 13 C-labeled glucose in a year-long incubation to trace microbial residue in sandy and silty soils. Across both soils, approximately 89% of retained microbial 13 C was recovered in the fine (<53 μm) mineral-associated organic matter (MAOM) pool. Within this pool, the light MAOM fraction, enriched in poorly crystalline Fe minerals, held 4.3 times more 13 C than the heavy, phyllosilicate-dominated MAOM fraction, despite accounting for only 17.2% of the total MAOM mass and 12.3% of the total soil mass. Along with 13 C enrichment, the light MAOM fraction showed greater abundance of N-containing groups, e.g., (amides and amino groups), indicative of microbial-derived compounds like proteins and amino sugars. Fe oxides in light MAOM from both soils were spatially dispersed. Microbial residue accumulation was greater in finer-textured silty soil. These findings demonstrate that mineral composition and texture jointly regulate microbial necromass accrual, highlighting light MAOM as a key pool for enhancing soil C storage.

13C isotope labeling↗
DOE OSTI2025

Semi‐Continuous Ex Situ Carbon Dioxide Mineralization in Produced Water for Calcite Production

ABSTRACT The mineralization of carbon dioxide (CO 2 ) to stable carbonate products is a desirable process for carbon capture utilization and storage (CCUS). However, improving the process economics through creative use of available reactants is necessary to develop a scalable mineralization process. This study details the development of a semi‐continuous CO 2 mineralization process that uses flue gas as a point CO 2 source, produced water (PW) as an alkaline source of Ca 2+ , and NaOH effluent (potentially sourced from integration with the chlor‐alkali process. Operating at a controlled pH allowed for both complete reaction of available Ca 2+ (100% carbonation potential or 9.9 g CO 2 .L –1 PW brine) and for reproducible control of the produced calcium carbonate (CaCO 3 ) product. A full factorial design of experiments was implemented to study the effects of reaction temperature, pH, and gaseous CO 2 concentration on the mineralization and CO 2 capture rates as well as product crystalline structure and morphology. A maximum CO 2 capture rate of 0.315 ± 0.007 kg.L –1 .d –1 was achieved at 25°C and 25% CO 2 . CO 2 gas to liquid phase mass transport is believed to be the rate limiting step. With improved reactor design and optimization, the proposed semi‐continuous mineralization process shows promise for scaling to a pilot scale CO 2 capture technology.

Bennett, Quinn [Institute for Sustainable Energy &↗
DOE OSTI2022

The transformation of U(VI) and V(V) in carnotite group minerals during dissimilatory respiration by a metal reducing bacterium

Recent results from laboratory and field studies support that dissimilatory metal reducing (DMR) bacteria influence the fate and transport of uranium in anaerobic subsurface environments. To date, most research efforts have focused on the reduction of soluble U(VI) by DMR bacteria to form insoluble uraninite (UO 2 ). Subsurface environments harbor, however, large reservoirs of U(VI) in solid or mineral form. Uranium that is structure-bound in minerals is expected to be more refractory to microbial reduction than soluble U, based on analogy with Fe respiration. The reducibility of U(VI) could impact the fate of U(IV) by controlling mineral precipitation reactions, which has implications for the long-term immobilization of U in subsurface environments. Here, we studied anoxic cultures of Shewanella putrefaciens CN32 incubated with natural carnotite-group minerals by X-ray diffraction, electron microscopy, scanning transmission X-ray microscopy (STXM). Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy measurements at U-N 4,5 , V-L 2,3 , and O-K edges on cultures incubated up to 10 months show that V(V) was reduced to V(IV), whereas U was not reduced. In contrast, V(V) and U(VI) in solution were both completely reduced to lower oxidation states by CN32, as precipitates within the exopolymer surrounding the bacteria. Assays for the toxicity of U and V to CN32 showed that biofilm formation was stimulated at 0.001 M U(VI), and growth was inhibited at concentrations of U(VI) greater than 0.001 M. Vanadium did not inhibit growth or stimulate biofilm formation at any concentration tested. Investigations of the bacteria-mineral and bacteria-metal interface at the nanometer and molecular scales provide new insights into the co-respiration of V and U that help explain their biogeochemical cycling and have implications for subsurface bioremediation of these elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Review of allanite: Properties, occurrence and mineral processing technologies

Allanite is commonly encountered as an accessory rare-earth silicate mineral in association with minerals such as garnet, biotite, and feldspar. It is distributed globally and occurs in igneous formations such as granites, pegmatites, and syenites, as well as in various metamorphic rocks such as schist, gneiss, and amphibolite. Moreover, it can be found in mineral veins formed through hydrothermal activity. While allanite has not yet been extensively utilized for the production of rare-earth elements, recent discoveries of high-grade rare-earth-rich allanite deposits in Wyoming, USA, highlight its economic potential. However, despite ongoing research on the mineralogy and processing of rare-earth minerals, allanite has not received widespread attention in mineral processing. To achieve economical extraction of rare-earth elements from allanite in the future, systematic studies on processing techniques (e.g., density separation, magnetic separation, flotation, leaching) are imperative to fully unlock the potential of allanite as a rare-earth element source. To pave the way for future investigation of allanite and address the unique processing challenges, this review article aims to comprehensively summarize previous studies, encompassing properties, occurrences, and processing technologies of allanite.

42 ENGINEERING↗