Search NASA⌕ Search

SEARCH · Search NASA

Results for “Manhattan Project”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Explanation of Significant Differences for the Record of Decision for Interim Actions in Zone 1, East Tennessee Technology Park, Oak Ridge, Tennessee

Zone 1 is a 1400-acre area outside the fence of the main plant at The East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. The Record of Decision for Interim Actions in Zone, ETTP (Zone 1 Interim ROD) (DOE 2002) identifies the remedial actions for contaminated soil, buried waste, and subsurface infrastructure necessary to protect human health and to limit further contamination of groundwater. Since the Zone 1 Interim Record of Decision (ROD) was signed, new information has been obtained that requires the remedy to be modified as follows: (1) Change the end use in Contractor's Spoil Area (CSA) from unrestricted industrial to recreational; (2) Remove Exposure Units (EU5) ZI-50, 51, and 52 from the scope of the Zone I Interim ROD; (3) Change the end use of the duct bank corridor from unrestricted industrial to restricted industrial; and (4) Remove restriction for the disturbance of soils below 10 feet in Exposure Unit (EU) Z1-04. In accordance with 40 Code of Federal Regulations (CFR) 300.435, these scope modifications are a 'significant' change to the Zone 1 Interim ROD. In accordance with CERCLA Sect. 117 (c) and 40 CFR 300.435 (c)(2)(i), such a significant change is documented with an Explanation of Significant Differences (ESD). The purpose of this ESD is to make the changes listed above. This ESD is part of the Administrative Record file, and it, and other information supporting the selected remedy, can be found at the DOE Information Center, 475 Oak Ridge Turnpike, Oak Ridge, Tennessee 37830, from 8:00 a.m. to 5:00 p.m., Monday through Friday. The ORR is located in Roane and Anderson counties, within and adjacent to the corporate city limits of Oak Ridge, Tennessee. ETTP is located in Roane County near the northwest corner of the ORR. ETTP began operation during World War II as part of the Manhattan Project. The original mission of ETTP was to produce enriched uranium for use in atomic weapons. The plant produced enriched uranium from 1945 until 1985. Uranium production was terminated in 1987. ORR was placed on the National Priorities List in 1989, so remediation activities are conducted under CERCLA. The primary contaminants of concern at ETTP follow: (1) In groundwater - volatile organic compounds (VOCs) at multiple locations (trichloroethene is generally the most prevalent compound); (2) In sediment - inorganic elements, radionuclides, and polychlorinated biphenyls; (3) In soil - inorganic elements, radionuclides, semivolatile organic compounds (particularly the polycyclic aromatic hydrocarbons), and VOCs; and (4) In facilities - radionuclides and polychlorinated biphenyls (abandoned facilities also pose a safety and health hazard to workers.) The purposes of the remedial actions selected in the Zone 1 Interim ROD are to allow unrestricted industrial use down to 10 feet and to remediate potential sources of groundwater contamination. Following is a summary of the major components of the Zone 1 Interim ROD remedy: (1) Excavation of the Blair Quarry burial area and associated contaminated soil; (2) Excavation of miscellaneous contaminated soil in the K-895 Cylinder Destruct Facility area and in the Powerhouse Area; (3) Removal of sludge and demolition of the K-710 sludge beds and Imhoff tanks; (4) Implementation of land use controls (LUCs); and (5) Characterization of soil and remediation of areas that exceed remediation levels.

54 ENVIRONMENTAL SCIENCES↗

The Ames Laboratory Annual Site Environmental Report: Calendar Year 2010

This report summarizes the environmental status of Ames Laboratory for calendar year 2010. It includes descriptions of the Laboratory site, its mission, the status of its compliance with applicable environmental regulations, its planning and activities to maintain compliance, and a comprehensive review of its environmental protection, surveillance and monitoring activities. In 2010, the Laboratory accumulated and disposed of waste under U.S. Environmental Protection Agency (EPA) issued generator numbers. All waste is handled according to all applicable EPA, State, Local regulations and DOE Orders. In 2006 the Laboratory reduced its generator status from a Large Quantity Generator (LQG) to a Small Quantity Generator (SQG). EPA Region VII was notified of this change. The Laboratory's RCRA hazardous waste management program was inspected by EPA Region VII in April 2006. There were no notices of violations. The inspector was impressed with the improvements of the Laboratory's waste management program over the past ten years. The Laboratory was in compliance with all applicable federal, state, local and DOE regulations and orders in 2010. There were no radiological air emissions or exposures to the general public due to Laboratory activities in 2010. See U.S. Department of Energy Air Emissions Annual Report in Appendix B. As indicated in prior SERs, pollution awareness, waste minimization and recycling programs have been in practice since 1990, with improvements implemented most recently in 2010. Included in these efforts were battery and CRT recycling, miscellaneous electronic office equipment, waste white paper and green computer paper-recycling and corrugated cardboard recycling. Ames Laboratory also recycles/reuses salvageable metal, used oil, foamed polystyrene peanuts, batteries, fluorescent lamps and telephone books. Ames Laboratory reported to DOE-Ames Site Office (AMSO), through the Laboratory's Performance Evaluation Measurement Plan, on its Affirmative Procurement Performance Measure. A performance level of 'A-' was achieved in 2010 for Integrated Safety, Health and Environmental Protection. As reported in Site Environmental Reports for prior years, the Laboratory's Environmental Management System (EMS) has been integrated into the Laboratory's Integrated Safety Management System since 2005. The integration of EMS into the way the Laboratory does business allows the Laboratory to systematically review, address and respond to the Laboratory's environmental impacts. The Laboratory's EMS was audited in April 2009 by DOE-CH. There were four 'Sufficiently in Conformity' findings as a result of the audit. All four findings were tracked in the Laboratory's corrective action database for completion. Beryllium was used routinely at Ames Laboratory in the 1940's and 1950's in processes developed for the production of highly pure uranium and thorium in support of the historic Manhattan Project. Laboratory metallurgists also worked on a process to produce pure beryllium metal from beryllium fluoride. In the early 1950's, beryllium oxide powder was used to produce shaped beryllium and crucibles. As a result of that work, beryllium contamination now exists in many interstitial spaces (e.g., utility chases) and ventilation systems in Wilhelm, Spedding and Metals Development buildings. Extensive characterization and remediation efforts have occurred in 2009 and 2010 in order to better understand the extent of the contamination. Analysis of extensive sampling data suggests that a fairly wide dispersion of beryllium occurred (most likely in the 1950's and 60's) in Wilhelm Hall and in certain areas of Spedding Hall and Metals Development. Area air-sampling results and work-area surface characterizations indicate the exposure potential to current workers, building visitors and the public remains extremely low. This information is now used to guide cleaning efforts and to provide worker protection during remodeling and maintenance activities. Results were shared with the DOE's Former Worker Program to support former worker medical testing and compensation programs. A complete discussion of the Laboratory's beryllium characterization and remediation efforts can be found at: http://www.ameslab.gov/operations/esha/beryllium-information.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Introduction to Pits and Weapons Systems (U) [Slides]

A Nuclear Explosive Package includes the Primary, Secondary, Radiation Case and related components. This is the part of the weapon that produces nuclear yield and it converts mechanical energy into nuclear energy. The pit is composed of materials that allow mechanical energy to be converted to electromagnetic energy. Fabrication processes used are typical of any metal fabrication facility: casting, forming, machining and welding. Some of the materials used in pits include: Plutonium, Uranium, Stainless Steel, Beryllium, Titanium, and Aluminum. Gloveboxes are used for three reasons: (1) Protect workers and public from easily transported, finely divided plutonium oxides - (a) Plutonium is very reactive and produces very fine particulate oxides, (b) While not the 'Most dangerous material in the world' of Manhattan Project lore, plutonium is hazardous to health of workers if not properly controlled; (2) Protect plutonium from reactive materials - (a) Plutonium is extremely reactive at ambient conditions with several components found in air: oxygen, water, hydrogen, (b) As with most reactive metals, reactions with these materials may be violent and difficult to control, (c) As with most fabricated metal products, corrosion may significantly affect the mechanical, chemical, and physical properties of the product; and (3) Provide shielding from radioactive decay products: α, γ, and η are commonly associated with plutonium decay, as well as highly radioactive materials such as 241 Am and 238 Pu.

36 MATERIALS SCIENCE↗

Oak Ridge National Laboratory Annual Sustainability Report 2010-2011

The mission of Oak Ridge National Laboratory (ORNL) is to deliver scientific discoveries and technical breakthroughs that will accelerate the development and deployment of solutions in clean energy and global security, and in doing so create economic opportunity for the nation. To execute this mission, ORNL integrates and applies distinctive core capabilities that provide it with signature strengths in neutron scattering, advanced materials, high-performance computing, and nuclear science and engineering. The intended outcome is to produce transformational innovations that will enable a 21st century industrial revolution. Managed by UT-Battelle, a partnership of the University of Tennessee (UT) and Battelle Memorial Institute, ORNL was established in 1943 to support the Manhattan Project. From an early focus on chemical technology and reactor development, ORNL’s research and development (R&D) portfolio broadened to include programs supporting DOE missions in scientific discovery and innovation, clean energy, and nuclear security. Today, as DOE’s largest science and energy laboratory, ORNL is engaged in programs and partnerships that leverage major national investments in critical research infrastructure, including the world’s foremost resources for neutron sciences, the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR), and the nation’s most powerful scientific computing complex. ORNL also manages the U.S. ITER project for DOE. Each year, ORNL hosts thousands of facility users and visiting scientists, many of whom perform work at its 10 user facilities, and supports the development of the next generation of scientific and technical talent. ORNL has a staff of about 4,400 and an annual budget of more than $\$$1.6 billion. The Laboratory’s extensive capabilities for scientific discovery and innovation are applied to the delivery of mission outcomes for DOE and other sponsors.

Lapsa, Melissa Voss↗

Experimental Physical Sciences Vistas: Los Alamos NPAC Research

The nuclear physics, particle physics, astrophysics, and cosmology (NPAC) capability at Los Alamos National Labora tory has a rich tradition of attracting and supporting some of the best scientists in the world to conduct fundamental research and to direct those talents to support the Lab’s national security science mission. Early luminaries such as Enrico Fermi and Hans Bethe were world renowned be fore they came to Los Alamos to work on the Manhattan Project; Fermi for his skills in experimental and theoretical nuclear physics and Bethe for his theoretical skills in nuclear physics and astrophysics—skills that were critical in the development of nuclear weapons. Later, as an outgrowth of their weapons physics research, scientists Frederick Reines and Clyde Cowan made the first confirmed measurement of the elusive neutrino, a discovery that led to Reines receiv ing the Nobel Prize in Physics in 1995. (Cowan died in 1974 before he was recognized for his contributions.)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biota Dose Assessment at LANL for 2011

Beginning with the Manhattan Project, the earliest work with radioactive material was located in what is now the center of Los Alamos townsite, and some of those materials were released into the environment or disposed of as waste. These radioactive materials have been extensively studied and assessed in many reports during the past 60 years. The assessments consider many activities relevant to dose assessment, such as adventurous children who burrow into and eat the soil, as well as the activities of pets and wildlife. Even for the most extreme scenarios, the doses are less than a few mrem per year, well below the DOE limit for the public, and four orders of magnitude below the DOE limit to terrestrial animals, which is 0.1 rad per day. Locations that pose even a very small risk to humans or pets are fenced, locked, and posted as controlled areas. However, it is recognized that biota such as plants, birds, mice, and worms live in these controlled areas. The DOE standard is intended to protect these biota. Contaminated sites in and near Los Alamos consist of areas known as solid waste management units (SWMU) and areas of concern (AoC) that have been identified and studied extensively in many reports. LA-UR-90-4300 lists these locations, and many subsequent reports provide extensive details and assessments. Between these areas, the levels of detectable radioactive materials are many orders of magnitude smaller. Because they are not a focus of concern, the areas outside of SWMUs and AoCs have not been as extensively studied or sampled. The highest concentrations of radioactive materials resulting from historic LANL operations are buried in material disposal areas (MDAs) such as MDA A, B, C, G, T, etc. Much of this material is sealed in containers that are not accessible to biota (McNaughton 2005). In some cases, it is buried below the reach of tree roots or burrowing animals, and in some cases it is encased or embedded in concrete. Of particular relevance to the present report, the hills to the west of LANL, where the Las Conchas fire burned, are not contaminated with LANL‐derived substances. The radioactivity in these hills consists of naturally occurring radioactive material (NORM) and global fallout.

54 ENVIRONMENTAL SCIENCES↗

Experiments with the Dragon Machine [Slides]

A summary and compilation of the first super-prompt-critical experiments performed in the early days of the Manhattan Project by Otto Frisch, Louis Slotin, Philip Morrison, and others.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

100-OL-1 Operable Unit Pilot Study: XRF Evaluation of Select Pre-Hanford Orchards

Prior to the acquisition of land by the U.S. Department of War in February 1943 and the creation of the Hanford Site, the land along the Columbia River was home to over 1000 people. Farming and orchard operations by both homesteaders and commercial organizations were prevalent. Orchard activities and the associated application of lead arsenate pesticide ceased in 1943, when residents were moved from the Hanford Site at the beginning of the Manhattan Project. Today, the residues from historical application of lead arsenate pesticide persist in some locations on the Hanford Site

100-OL-1↗

High-Precision Plutonium Isotopic Compositions Measured on Los Alamos National Laboratory’s General’s Tanks Samples: Bearing on Model Ages, Reactor Modelling, and Sources of Material. Further Discussion of Chronometry

In this study, we re-analyzed late-1940’s, Manhattan Project era Plutonium-rich sludge samples recovered from the ''General’s Tanks'' located within the nation’s oldest Plutonium processing facility, Technical Area 21. These samples were initially characterized by lower accuracy, and lower precision mass spectrometric techniques. We report here information that was previously not discernable: the two tanks contain isotopically distinct Pu not only for the major (i.e., 240 Pu, 239 Pu) but trace ( 238 Pu , 241 Pu, 242 Pu) isotopes. Revised isotopics slightly changed the calculated 241 Am- 241 Pu model ages and interpretations.

54 ENVIRONMENTAL SCIENCES↗

Oak Ridge Reservation Annual Site Environmental Report for 2014

The US Department of Energy’s (DOE’s) Oak Ridge Reservation (ORR) is located in Roane and Anderson counties in East Tennessee, about 40 km (25 miles) from Knoxville. ORR is one of DOE’s most unique and complex sites. It encompasses three major facilities and thousands of employees that perform every mission in the DOE portfolio—energy research, environmental restoration, national security, nuclear fuel supply, reindustrialization, science education, basic and applied research in areas important to US security, and technology transfer. ORR was established in the early 1940s as part of the Manhattan Project for the purposes of enriching uranium and pioneering methods for producing and separating plutonium. Today, scientists at the Oak Ridge National Laboratory (ORNL), DOE’s largest multipurpose national laboratory, conduct world-leading research in advanced materials, alternative fuels, climate change, and supercomputing. The Y-12 National Security Complex (Y-12 or Y-12 Complex) is vital to maintaining the safety, security, and effectiveness of the US nuclear weapons stockpile and reducing the global threat posed by nuclear proliferation and terrorism. The East Tennessee Technology Park (ETTP), a former uranium enrichment complex, is being transitioned to a clean, revitalized industrial park.

54 ENVIRONMENTAL SCIENCES↗

Holographic Imaging of Evolving Laser-Plasma Structures

In the 1870s, English photographer Eadweard Muybridge captured motion pictures within one cycle of a horse’s gallop, which settled a hotly debated question of his time by showing that the horse became temporarily airborne. In the 1940s, Manhattan project photographer Berlin Brixner captured a nuclear blast at a million frames per second, and resolved a dispute about the explosion’s shape and speed. In this project, we developed methods to capture detailed motion pictures of evolving, light-velocity objects created by a laser pulse propagating through matter. These objects include electron density waves used to accelerate charged particles, laser-induced refractive index changes used for micromachining, and ionization tracks used for atmospheric chemical analysis, guide star creation and ranging. Our “movies”, like Muybridge’s and Brixner’s, are obtained in one shot, since the laser-created objects of interest are insufficiently repeatable for accurate stroboscopic imaging. Our high-speed photographs have begun to resolve controversies about how laser-created objects form and evolve, questions that previously could be addressed only by intensive computer simulations based on estimated initial conditions. Resolving such questions helps develop better tabletop particle accelerators, atmospheric ranging devices and many other applications of laser-matter interactions. Our photographic methods all begin by splitting one or more “probe” pulses from the laser pulse that creates the light-speed object. A probe illuminates the object and obtains information about its structure without altering it. We developed three single-shot visualization methods that differ in how the probes interact with the object of interest or are recorded. (1) Frequency-Domain Holography (FDH). In FDH, there are 2 probes, like “object” and “reference” beams in conventional holography. Our “object” probe surrounds the light-speed object, like a fleas swarming around a sprinting animal. The object modifies the probe, imprinting information about its structure. Meanwhile, our “reference” probe co-propagates ahead of the object, free of its influence. After the interaction, object and reference combine to record a hologram. For technical reasons, our recording device is a spectrometer (a frequency-measuring device), hence the name “frequency-domain” holography. We read the hologram electronically to obtain a “snapshot” of the object’s average structure as it transits the medium. Our published work shows numerous snapshots of electron density waves (“laser wakes”) in ionized gas (“plasma”), analogous to a water wake behind a boat. Such waves are the basis of tabletop particle accelerators, in which charged particles surf on the light-speed wave, gaining energy. Comparing our snapshots to computer simulations deepens understanding of laser wakes. FDH takes snapshots of objects that are quasi-static --- i.e. like Muybridge’s horse standing still on a treadmill. If the object changes shape, FDH images blur, as when a subject moves while a camera shutter is open. Many laser-generated objects of interest do evolve as they propagate. To overcome this limit of FDH, we developed .... (2) Frequency-Domain Tomography (FDT). In FDT, 5 to 10 probe pulses are fired simultaneously across the object’s path at different angles, like a crossfire of bullets. The object imprints a “streaked” record of its evolution on each probe, which we record as in FDH, then recover a multi-frame “movie” of the object’s evolving structure using algorithms of computerized tomography. When propagation distance exceeds a few millimeters, reconstructed FDT images distort. This is because the lenses that image probes to detector have limited depth of field, like cameras that cannot focus simultaneously on both nearby and distant objects. But some laser-generated objects of interest propagate over meters. For these applications we developed … (3) Multi-Object-Plane Phase-Contrast Imaging (MOP-PCI). In MOP-PCI, we image FDT-like probes to the detector from multiple “object planes” --- like recording an event simultaneously with several cameras, some focused on nearby, others on distant, objects. To increase sensitivity, we exploit a phase-contrast imaging technique developed by Dutch Nobel laureate Fritz Zernike in the 1930s. Using MOP-PCI we recorded single-shot movies of laser pulse tracks through more than 10 cm of air. We plan to record images of meter-long tracks of electron bunches propagating through plasma in an experiment at the Stanford Linear Accelerator Center (SLAC). This will help SLAC scientists understand, optimize and scale small plasma-based particle accelerators that have applications in medicine, industry, materials science and high-energy physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On The Export Control Of High Speed Imaging For Nuclear Weapons Applications

Since the Manhattan Project, the use of high-speed photography, and its cousins flash radiography1 and schieleren photography have been a technological proliferation concern. Indeed, like the supercomputer, the development of high-speed photography as we now know it essentially grew out of the nuclear weapons program at Los Alamos2,3,4. Naturally, during the course of the last 75 years the technology associated with computers and cameras has been export controlled by the United States and others to prevent both proliferation among non-P5-nations and technological parity among potential adversaries among P5 nations. Here we revisit these issues as they relate to high-speed photographic technologies and make recommendations about how future restrictions, if any, should be guided.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

The Tragic Bazooka Accident at Los Alamos on July 14, 1962

In recent years the Laboratory has made information (documents, photographs, and perspectives) regarding the occupational explosives accidents that killed seven men in the late 1950s more accessible to the public. While pursuing this effort, we were reminded of similar tragedies that occurred to children of the community. The purpose of this paper is to make information that has come into our hands more available to the public regarding these accidents. Following this introduction, a brief synopsis is provided for each accident. The appendices contain source documents for the 1962 accident that are not generally available. The community of Los Alamos, New Mexico was born out of a military post created to support the secret Manhattan Project during World War II. Security was provided by military police and some training exercises were conducted using live ordnance. In two instances unexploded ordnance (UXO) from this era was found “in the field” by residents hiking in the local area and brought into town. Tragically, handling these “bazooka” rounds as “dud” munitions resulted in death for one child and injury to several others. The first accident occurred on Saturday, September 6, 1947, which resulted in injuries to two boys, ages 5 and 12. The second accident occurred on Saturday, July 14, 1962 and resulted in the death of one five-year-old boy, and injuries to four other children, ages 6 to 10 years-old. The latter accident is the primary focus of the paper.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Norris Bradbury and Edward Teller: A Fission-Fusion Reaction

On a bright, sunny day in October 1945, a boisterous and jubilant crowd assembled in front of Fuller Lodge to watch as the Army-Navy “E” Award, a prestigious national honor given for “Excellence in Production” during World War II, was presented to the Los Alamos Laboratory. Major General Leslie Groves, the commanding officer of the Manhattan Project; Navy Commodore William S. (Deak) Parsons, the wartime leader of the Laboratory’s Ordnance Division; Robert Sproul, the President of the University of California; and J. Robert Oppenheimer accepted the award on behalf of the Laboratory.

99 GENERAL AND MISCELLANEOUS↗

Actinides and Correlated Electron Materials

The Actinides and Correlated Electron Materials area of leadership spans Los Alamos National Laboratory competency in actinide materials research dating to the Manhattan Project as articulated in the Integrated Plutonium Science and Research Strategy and competency in strongly correlated electron systems dating back to at least the early 1980s. This area of leadership focuses on the goals of discovering, understanding, and controlling emergent electronic states and predictive performance of actinide materials. They are quintessentially linked by the fact that the physics of actinides—and plutonium in particular—are governed by strong electronic correlations. Not only is the electronic structure of actinides dictated by fine details of electron correlations, but chemical bonding and physical structure are as well. Hence, by addressing the first goal of this leadership area we can significantly accelerate progress on the second goal. To understand such matter requires probing the intertwined spin, charge, orbital, and lattice degrees of freedom with greater precision and developing models that accurately predict the consequences of these coupled degrees of freedom, on multiple length and time scales and including acute reactivity and effects of self-irradiation phenomena in these materials.

36 MATERIALS SCIENCE↗

Reevaluation of Three Cold War-Era Buildings at Technical Area 22

The U.S. Department of Energy, National Nuclear Security Administration, Los Alamos Field Office (Field Office) reevaluated three magazines (buildings 7, 8, and 10) at Technical Area (TA) 22, Los Alamos National Laboratory (LANL or the Laboratory) (Map 1). This reevaluation was conducted because the magazines have been identified as candidates for preservation due to their association with the almost 40 years of Cold War-era detonator research conducted at adjacent building TA-22-1 (Maps 2–4), a property that is eligible for inclusion in the Manhattan Project National Historical Park (MAPR) for its role in the assembly of the wartime Fat Man bomb. Cold War-era magazines, TA-22-7, -8, and -10, were originally determined not eligible for listing in the National Register of Historic Places (Register) in DX Division’s Facility Strategic Plan: Consolidation and Revitalization at Technical Areas 6, 8, 9, 14, 15, 22, 36, 39, 40, 60, and 69 (McGehee et al. 2005) in consultation with the State Historic Preservation Officer on April 18, 2006. Many of the magazines at TA-22 are of identical construction, and at the time of the initial evaluation, other magazines were selected as the best examples of type for the purpose of architectural documentation. The reevaluation is being conducted because the status of TA-22-1 and its immediate area have changed since the MAPR was authorized in December 2014. The three magazines, along with a magazine that was previously determined eligible in 2006 (TA-22- 9), are within one of the proposed boundaries for the MAPR at LANL and are also now considered candidates for preservation. These magazines were constructed in 1949 to support detonator research, development, and testing, and have served as reinforced storage facilities for high explosives since their construction.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Internship Report on Sandia National Labs

Sandia National Laboratories (also known as Sandia Labs) is a Government owned contractor operated facility. Sandia's mission is to develop advanced technologies to ensure global peace. The laboratory first began in 1945 as a division of Los Alamos National Laboratory and did not become its own laboratory until 1948. The labs was a descendant of the Manhattan Project and about 20 years later, Sandia National Laboratory became part of the Department of Energy (DOE) laboratories.

99 GENERAL AND MISCELLANEOUS↗