Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mars Telecommunication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Lagrange-Based Options for Relay Satellites to Eliminate Earth-Mars Communications Outages During Solar Superior Conjunctions

Recent conjunction class Mars human mission plans have generally assumed that there will inevitably be periods of communications outages between Earth and Mars. This has significant cost and risk implications for not only Mars missions, but also precursor missions in the lunar environment. But are there ways to avoid these outages? The potential exists for communications to be interrupted by Solar Superior Conjunctions (SSCs). Depending on the communications system, used, there can be communications outages up to as many as 78 days. The higher bandwidth systems experience the greatest outage. If these communications channels are interrupted due to an SSC, there are of course resulting challenges to mission operations. An outage of a few days to a few weeks could allow minor disturbances to become major concerns or even trigger subsystems failures. An inability to consult with the ground at the wrong time could result in loss of mission, loss of an element, or loss of life. Each planet in the solar system has a set of five Lagrange points associated with it and the Sun. At any given point in time, a planet or either its L4 or L5 point is visible to any other planet in the solar system, regardless of the position of the sun relative to the two. Thus, L4 and L5 have high value as relay systems to prevent communications outages. There are four sets of solar Lagrange points that may be of potential use in this study: Mars-Sun L4 and L5 points, Earth-Sun L4 and L5, Venus-Sun L4 and L5, and Mercury-Sun L4 and L5. A candidate relay satellite system will be identified, with consideration of both new technology developments and existing telecommunications satellites. This system may have implications for not only the Mars human mission architectures, but also Gateway and human lunar surface architectures as these other studies are tasked with paving the way to human Mars missions. If Mars communications outages can be eliminated, then the degree of autonomy necessary in Mars and precursor systems may be reduced.

Relay Satellite↗
NASA NTRS2018

Next Generation Relay Services at Mars via an International Relay Network

Nearly all data acquired by vehicles on the surface of Mars are returned to Earth via Mars orbiters – more than 1.7 terabits so far. Successful communication between the various spacecraft is achieved via the careful implementation of internationally recognized CCSDS telecommunications protocols and the use of planning and coordination services provided by NASA’s Mars Program Office and the Multimission Ground Systems and Services (MGSS) Program at the Jet Propulsion Laboratory in Pasadena, CA. This modern Mars relay network has evolved since its inception in 2004 with the addition and loss of several missions, but it has fundamentally remained unchanged. Ground interfaces between the various spacecrafts’ mission operations centers on Earth remain largely unique for each participant, each mission maintains its own interfaces with deep space communications networks (e.g. DSN, ESTRACK), which are similar but still unique; and relay sessions at Mars require careful ground planning, coordination, and implementation. This paper will discuss the existing architecture and consider how several technologies may be applied to the next generation of relay services at Mars. Ultimately, these are expected to lead to the implementation of a delay and disruption tolerant network at Mars, a precursor to becoming a major element in an emerging Solar System Internet.

Edwards, Charles D. Jr↗
NASA NTRS2006

Mars Reconnaissance Orbiter: Ka Band Radio Science Experiments and the Effect of the Troposphere

This viewgraph presentation reviews the possibilities of utilizing the telecommunication links between spacecraft and Earth to examine changes in the phase/frequency, amplitude, and polarization of radio signals to investigate, specifically for the Mars Reconnaissance Orbiter (MRO)mission utilizes X-band coherent (uplink and downlink) carrier Doppler and range for its gravity investigation Gravity team will also take advantage of Ka-band downlink signal Tropospheric calibration data from Advanced Water Vapor Radiometer (AWVR) will be used. The calibration of the received Ka band signal for the effect of the troposphere is discussed.

Ka-band↗
NASA NTRS2008

Delay-Throughput Performance of the Deep-Space Ka-band Link

In this paper, performance of a first-in, first-out (FIFO), selective retransmission scheme for the deep-space Ka-band link is presented and compared to the performance of a comparable X-band link. In this analysis, 16 months of water vapor radiometer (WVR) and advanced water vapor radiometer (AWVR) data from the three Deep Space Network (DSN) Communication Complexes (DSCC) were used to emulate weather effects on X-band and Ka-band links from Mars. Mars Reconnaissance Orbiter (MRO) X-band and Ka-band telecommunications parameters were used for spacecraft telecommunications capabilities. One pass per week per complex was selected from MRO's Deep Space Network (DSN) schedule from April 1, 2006 to August 31, 2007 for a total of 207 passes (69 passes per complex) for this analysis. For each pass both X-band and Ka-band links were designed using at most two data rates so that the expected pass capacity would be maximized subject to a minimum availability requirement (MAR). In conjunction with the WVR/AWVR data, elevation profiles of the selected passes and models for the performance of the antennas in the DSN were used to emulate the performance of both links. It was assumed that the retransmission of the data takes place not on the same pass as the original transmission but during subsequent passes. The data collected before a pass was assumed to be a fraction of the expected capacity of the pass as calculated through the link design process. Infinite spacecraft storage was assumed to obtain an upper bound on the spacecraft storage requirement. The independent parameters of this analysis were MAR and the ratio of data collected before a pass to the expected pass capacity. Since the selected passes did not occur at regular intervals, the delay in this analysis was measured in terms of number of passes. The throughput was measured in terms of number of bits received successfully on the ground. The results indicate that reasonable delay performance could be achieved with very high throughput for relatively low MAR values for data collection to expected pass capacity ratio of around 97% for Ka-band. The results indicate that, except for very low average delay requirements, the Ka-band link provides more than twice the throughput of the X-band link for the same amount of power consumed by the spacecraft. In addition, the results indicate that the required storage onboard the spacecraft is not prohibitive and good performance could be achieved by using a buffer size less than three times the maximum amount of data collected before a pass.

Shambayati, Shervin↗
NASA NTRS2008

Delay-Throughput Performance the Deep-Space Ka-Band Link

In this paper, performance of a first-in, first-out (FIFO), selective retransmission scheme for the deep-space Ka-band link is presented and compared to the performance of a comparable X-band link. In this analysis, 16 months of water vapor radiometer (WVR) and advanced water vapor radiometer (AWVR) data from the three Deep Space Network (DSN) Communication Complexes (DSCC) were used to emulate weather effects on X-band and Ka-band links from Mars. Mars Reconnaissance Orbiter (MRO) X-band and Ka-band telecommunications parameters were used for spacecraft telecommunications capabilities. One pass per week per complex was selected from MRO's Deep Space Network (DSN) schedule from April 1, 2006 to August 31, 2007 for a total of 207 passes (69 passes per complex) for this analysis. For each pass both X-band and Ka-band links were designed using at most two data rates so that the expected pass capacity would be maximized subject to a minimum availability requirement (MAR). In conjunction with the WVR/AWVR data, elevation profiles of the selected passes and models for the performance of the antennas in the DSN were used to emulate the performance of both links. It was assumed that the retransmission of the data takes place not on the same pass as the original transmission but during subsequent passes. The data collected before a pass was assumed to be a fraction of the expected capacity of the pass as calculated through the link design process. Infinite spacecraft storage was assumed to obtain an upper bound on the spacecraft storage requirement. The independent parameters of this analysis were MAR and the ratio of data collected before a pass to the expected pass capacity. Since the selected passes did not occur at regular intervals, the delay in this analysis was measured in terms of number of passes. The throughput was measured in terms of number of bits received successfully on the ground. The results indicate that reasonable delay performance could be achieved with very high throughput for relatively low MAR values for data collection to expected pass capacity ratio of around 97% for Ka-band. The results indicate that, except for very low average delay requirements, the Ka-band link provides more than twice the throughput of the X-band link for the same amount of power consumed by the spacecraft. In addition, the results indicate that the required storage onboard the spacecraft is not prohibitive and good performance could be achieved by using a buffer size less than three times the maximum amount of data collected before a pass.

Shambayati, Shervin↗
NASA NTRS2017

50,000 Laps Around Mars: Navigating the Mars Reconnaissance Orbiter Through the Extended Missions (January 2009 - March 2017)

Orbiting Mars since March 2006, the Mars Reconnaissance Orbiter (MRO) spacecraft continues to perform valuable science observations, provide telecommunication relay for surface assets, and characterize landing sites for future missions. Previous papers reported on the navigation of MRO from interplanetary cruise through the end of the Primary Science Phase (PSP) in December 2008 and on maneuvers performed through November 2016. This paper highlights the navigation of MRO from January 2009 through its 50,000th orbit around Mars on March 27, 2017, an eight-year period covering the Extended Science Phase, the first three extended missions, and a portion of the fourth extended mission which began on October 1, 2016. Since the beginning of the PSP in November 2006, MRO’s navigation performance has continued to exceed expectations. Over that period of time, the mission has returned over 300 terabytes of data.

Schulze, William↗
NASA NTRS2006

A Multi-mission Event-Driven Component-Based System for Support of Flight Software Development, ATLO, and Operations first used by the Mars Science Laboratory (MSL) Project

This paper details an architectural description of the Mission Data Processing and Control System (MPCS), an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is developed based on a set of small reusable components, implemented in Java, each designed with a specific function and well-defined interfaces. An industry standard messaging bus is used to transfer information among system components. Components generate standard messages which are used to capture system information, as well as triggers to support the event-driven architecture of the system. Event-driven systems are highly desirable for processing high-rate telemetry (science and engineering) data, and for supporting automation for many mission operations processes.

Mission Data Processing and Control System (MPCS)↗
NASA NTRS2023

New Retropropulsion Concept with NTAC Power for Mars Entry

Since the initial deployments of probes, orbiters, and rovers on Mars, there have been many ideas and concepts on how to perform an entry, descent, and landing (EDL) process efficiently and safely through the Martian atmosphere to place payloads onto the surface of Mars. Among the missions sent to perform EDL on Mars, only roughly sixty percent of the missions have been successful. The 5 minutes to 20 minutes of communication gap due to long-range telecommunications to Earth, described as seven minutes of terror, add to the complexity of EDL missions to Mars. As the payloads have become larger, the method of EDL has become more complex. To place an automobile-size science rover on the Martian surface requires the use of retrorockets mounted on a Sky Crane during the final subsonic stage of EDL. Larger payloads will require more propellant and more and/or larger retropropulsion engines during the earlier supersonic stage of EDL. The Sky Crane concept may not be scalable for these larger payloads and during supersonic flight; hence, new approaches are sought. A new power technology invented at NASA called Nuclear Thermionic Avalanche Cell (NTAC) may offer an additional solution. Powered by NTAC, the newly invented retropropulsion concept would ingest carbon dioxide gas, heat it up and blast it out as a new feature of the EDL process. NTAC would be reusable as a primary power source for payloads such as excavators, three-dimensional (3D) printers, or mobile equipment for mining, construction, and additive manufacturing tasks. Since NTAC would need to be landed with its host payload or as a standalone power package, assessing its ability to assist in its own EDL seems reasonable. The purpose of this Technical Memorandum (TM) is to examine the performance of NTAC in the context of EDL at Mars for motivating studies for integrating NTAC into future Mars mission architectures.

Mars entry↗
NASA NTRS1993

Fuzzy logic path planning system for collision avoidance by an autonomous rover vehicle

The Space Exploration Initiative of the United States will make great demands upon NASA and its limited resources. One aspect of great importance will be providing for autonomous (unmanned) operation of vehicles and/or subsystems in space flight and surface exploration. An additional, complicating factor is that much of the need for autonomy of operation will take place under conditions of great uncertainty or ambiguity. Issues in developing an autonomous collision avoidance subsystem within a path planning system for application in a remote, hostile environment that does not lend itself well to remote manipulation by Earth-based telecommunications is addressed. A good focus is unmanned surface exploration of Mars. The uncertainties involved indicate that robust approaches such as fuzzy logic control are particularly appropriate. Four major issues addressed are (1) avoidance of a fuzzy moving obstacle; (2) backoff from a deadend in a static obstacle environment; (3) fusion of sensor data to detect obstacles; and (4) options for adaptive learning in a path planning system. Examples of the need for collision avoidance by an autonomous rover vehicle on the surface of Mars with a moving obstacle would be wind-blown debris, surface flow or anomalies due to subsurface disturbances, another vehicle, etc. The other issues of backoff, sensor fusion, and adaptive learning are important in the overall path planning system.

Murphy, Michael G.↗
NASA NTRS2012

Integrated RF/Optical Interplanetary Networking Preliminary Explorations and Empirical Results

Over the last decade interplanetary telecommunication capabilities have been significantly expanded--specifically in support of the Mars exploration rover and lander missions. NASA is continuing to drive advances in new, high payoff optical communications technologies to enhance the network to Gbps performance from Mars, and the transition from technology demonstration to operational system is examined through a hybrid RF/optical approach. Such a system combines the best features of RF and optical communications considering availability and performance to realize a dual band trunk line operating within characteristic constraints. Disconnection due to planetary obscuration and solar conjunction, link delays, timing, ground terminal mission congestion and scheduling policy along with space and atmospheric weather disruptions all imply the need for network protocol solutions to ultimately manage the physical layer in a transparent manner to the end user. Delay Tolerant Networking (DTN) is an approach under evaluation which addresses these challenges. A multi-hop multi-path hybrid RF and optical test bed has been constructed to emulate the integrated deep space network and to support protocol and hardware refinement. Initial experimental results characterize several of these challenges and evaluate the effectiveness of DTN as a solution to mitigate them.

Raible, Daniel E.↗
NASA NTRS1976

Planetary imaging - Past, present, and future

Recent exploration of the planets has been highlighted by the development of visual imaging systems carried on board the spacecraft. This paper describes the evolution of planetary camera systems from the earliest reconnaissance flight to Mars in 1965 (Mariner 4) through the planned mission to Jupiter and Saturn in 1977. Advances in telecommunication performance, mission planning and operations, and digital processing of images are also discussed. Science objectives and changes in the imaging systems required to meet these objectives are discussed for the Mariner Mars 1971 (Mariner 9), Mariner Venus-Mercury (Mariner 10), Viking 1975 (Mars Orbiter), and Mariner Jupiter-Saturn 1977 missions. The last section of the paper describes future plans for imaging experiments based on cameras using solid-state sensors, particularly charge-coupled devices.

Masursky, H.↗
NASA NTRS2016

Demonstration of Mars Crosslink Occultation Measurements for Future Small Spacecraft Constellations

Future planetary atmospheric profiling via radio occultations (RO) benefits significantly from increased received signal-to-noise ratio as well as geometrical coverage of links between two or more spacecraft in orbit around a target planet. These can be small spacecraft, possibly dedicated to quality radio-metrics with precision clock reference. Motivated by long-term research investigating the optimum SNR for the science performance, the optimum reference clock stability, the number and combination of wavelengths driving the number of transmitters and antennas, the optimum number and orbital spacecraft configuration, and design modifications to existing radio communication systems that would allow these new science objectives on future missions, three crosslink occultation experiments have been acquired between the Mars Odyssey and Mars Reconnaissance Orbiter spacecraft to probe the Martian atmosphere. While crosslink occultations between Earth orbiting satellites have long been used to profile the Earth’s atmosphere, this represents the first demonstration of crosslink occultation measurements at another planet. These measurements leverage the proximity link telecommunication payloads on each orbiter, which were designed to provide relay communication and navigation services to Mars landers and rovers. Analysis of the observed Doppler shift on each crosslink measurement reveals a clear signature of the Martian atmosphere, primarily the ionosphere. Inversion of the observed Doppler data yields vertical profiles of the Martian refractivity and electron density. The electron density profiles show the presence of two layers with peak densities and peak heights that are consistent with empirical models.

Asmar, Sami↗
NASA NTRS1983

Low cost planetary science missions

The use of existing earth-orbiting satellite technology represents a potential way of fulfilling important planetary exploration goals at greatly reduced cost, at least within the region between Venus and the inner asteroid belt. The present paper reports three studies of options for such missions to near-earth asteroids, the moon and Mars. The asteroid mission projected would be that of a rendezvous with either Anteros or Eros for purposes of resource determination, using an adaptation of the Tiros-N weather satellite. Two parallel studies were done on geoscience orbiters intended to provide detailed composition mapping from low polar orbit of the moon and Mars based on the modification of the same spacecraft design: the FLTSATCOM spacecraft, and the Atmospheric Explorer/Dynamics Explorer (later changed to Tiros for combined moon-Mars missions). Studies have shown the major modifications required to involve the telecommunications, data handling, power, propulsion and attitude control subsystems, and have demonstrated concept feasibility.

French, J. R.↗
NASA NTRS1994

The MGS Avionics System Architecture: Exploring the Limits of Inheritance

Mars Global Surveyor (MGS) avionics system architecture comprises much of the electronics on board the spacecraft: electrical power, attitude and articulation control, command and data handling, telecommunications, and flight software. Schedule and cost constraints dictated a mix of new and inherited designs, especially hardware upgrades based on findings of the Mars Observer failure review boards.

Mars Global Surveyor MGS↗
NASA NTRS2003

Navigation services of the Mars Network

The Mars Network provides proximity based communications and navigation services to support Mars exploration. The network will be comprised of science orbiters with a MN relay transceiver, and potentially, dedicated telecommunication orbiters. The common MN transceiver, called Electra, is currently in deployment, and is being designed for both communications and radiometric tracking.

Mars Network navigation doppler↗
NASA NTRS2018

Space and Earth Terminal Sizing for Future Mars Missions

NASA is investigating potential communications architectures to support future missions to Mars, with a time horizon out to about 2040. We examined a wide range of Earth-surface, Earth-orbiting, Mars-orbiting, and Mars-landed assets with both radio frequency and optical capabilities, and estimated the size, weight, power, and comparative cost of spacecraft telecommunications subsystems along with their comparative costs. Link attributes needed to achieve a fixed set of desired data rate capabilities were derived, assuming a planned set of Earth stations. For the trunk link from Mars to Earth, the required return data rates considered were 50, 75, 125, and 250 Mbps, and the required forward data rates considered were 30 and 50 Mbps. For proximity links, the required forward and return data rates (symmetric) ranged from 0.36 Mbps to 100 Mbps. The communication channels considered were UHF (75 cm wavelength) for proximity links only, and X-band (3.6 cm wavelength), Kaband (0.81 cm wavelength), and optical (808, 976, 1064, and 1550 nm wavelength) for both proximity and trunk links. Optical solutions provided substantial size and spectrum constraint advantages, but mixed advantages and disadvantages on mass and power. System cost was lower if the RF capability of space assets was increased to permit the number of arrayed RF Earth stations to be limited to two.

MacNeal, Bruce↗
NASA NTRS1991

Fuzzy Logic Path Planning System for Collision Avoidance by an Autonomous Rover Vehicle

Systems already developed at JSC have shown the benefits of applying fuzzy logic control theory to space related operations. Four major issues are addressed that are associated with developing an autonomous collision avoidance subsystem within a path planning system designed for application in a remote, hostile environment that does not lend itself well to remote manipulation of the vehicle involved through Earth-based telecommunication. A good focus for this is unmanned exploration of the surface of Mars. The uncertainties involved indicate that robust approaches such as fuzzy logic control are particularly appropriate. The four major issues addressed are: (1) avoidance of a single fuzzy moving obstacle; (2) back off from a dead end in a static obstacle environment; (3) fusion of sensor data to detect obstacles; and (4) options for adaptive learning in a path planning system.

Murphy, Michael G.↗