Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mechanical cooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

On the maintenance of sunspots - An ion hurricane mechanism

Inward and downflow motions below the photosphere are considered to be a means of cooling and powering sunspot dynamics. Parker's superadiabatic effect is examined with attention focused on the energetics involved in ionization advection. The current analysis enhances Parker's mechanism by allowing for a 2 m/s downflow velocity at 2000 km depth to significantly reduce the photospheric irradiance to near umbral intensities. Similarities between sunspots and terrestrial hurricanes are noted, and it was found that ionization energy plays the same role in sunspots as latent energy plays in terrestrial weather systems. Based on the hypothesis that magnetic fields are important in organizing the motions on the sun, some understanding is provided of: (1) the instability which drives the cooling mechanism for sunspots, (2) the low latitude appearance of sunspots, (3) active region development with faculae following sunspot growth, (4) the role of the fluid in maintaining the magnetic field and the role of the field as a focal point for the fluid downflow, (5) the heating mechanism and structure of faculae, (6) energy balance in active regions, and (7) the behavior difference of pores and ephemeral active regions in relation to ordinary sunspots and active regions.

Schatten, K. H.↗
NASA NTRS2003

Active Control of Jets in Cross-Flow for Film Cooling Applications

Jets in cross-flow have applications in film cooling of gas turbine vanes, blades and combustor liners. Their cooling effectiveness depends on the extent to which the cool jet-fluid adheres to the cooled component surface. Lift-off of the cooling jet flow or other mechanisms promoting mixing, cause loss of cooling effectiveness as they allow the hot "free-stream" fluid to come in contact with the component surface. The premise of this project is that cooling effectiveness can be improved by actively controlling (e.9. forcing, pulsing) the jet flow. Active control can be applied to prevent/delay lift-off and suppress mixing. Furthermore, an actively controlled film-cooling system coupled with appropriate sensory input (e.g. temperature or heat flux) can adapt to spatial and temporal variations of the hot-gas path. Thus, it is conceivable that the efficiency of film-cooling systems can be improved, resulting in coolant fluid economy. It is envisioned that Micro Electro-Mechanical Systems (MEMS) will play a role in the realization of such systems. As a first step, a feasibility study will be conducted to evaluate the concept, identify actuation and sensory elements and develop a control strategy. Part of this study will be the design of a proof-of-concept experiment and collection of necessary data.

Nikitopoulos, Dimitris E.↗
NASA NTRS1992

Coronal Magnetic Structures Observing Campaign. II - Magnetic and plasma properties of a solar active region

Simultaneous soft X-ray, microwave, and photospheric magnetic field observations were taken during the Coronal Magnetic Structures Observing Campaign. The plasma electron temperatures and emission measures determined from the X-ray data are used to predict the intensity and structure of the thermal bremsstrahlung emission at 20 and 6 cm. Comparing these predictions with the microwave observations, it is found that the 20 cm structure is very similar to that expected from the X-rays, but a substantial amount of the 6 cm emission was resolved out. The predicted 20 cm brightness temperatures are higher than the observed, requiring cool absorbing material (not greater than 500,000 K) between the hot X-ray plasma and the observer. The absorption mechanism in the cool plasma at 20 cm is most likely thermal bremsstrahlung, requiring coronal magnetic fields as high as 150 G. 'Coronal Magnetograms', made by extrapolating the photospheric longitudinal field using the Sakurai code, show that appropriate values of the total field are reached at heights of 6000-10,000 km above the photosphere (at many but not all locations).

Schmelz, J. T.↗
NASA NTRS1983

Infrared Temperature Measurements of a Reciprocating Seal Test

A system has been developed to perform a computer analysis on surface temperature data in tribological systems, taken by an infrared radiation scanning device. The infrared scanner which normally scans at 25 fields per second and 100 lines per field has been modified to scan any single line at 2500 lines per second. The system was used to analyze four friction experiments as part of a thermal behavior study of Stirling engine seals in cooperation between Georgia Institute of Technology and Mechanical Technology, Incorporated. The friction experiments involved two tribo pairs, Rulon on steel and Rulon on sapphire. The results clearly demonstrate the importance of the relative rate of cooling and the mechanical cycle time of the system. For rapid mechanical cycle times in the friction experiment the surface temperature distribution reflects the distribution of energy input on the surface and the temperatures persist for periods longer than that of the mechanical cycle.

Meinders, M. A.↗
NASA NTRS1980

Radiative cooling efficiencies and predicted spectra of species of the Io plasma torus

Calculations of the physical condition of the Io plasma torus have been made based on the recent Voyager EUV observations. The calculations represent an assumed thin plasma collisional ionization equilibrium among the states within each species. The observations of the torus are all consistent with this condition. The major energy loss mechanism is radiative cooling in discrete transitions. Calculations of radiative cooling efficiencies of the identified species leads to an estimated energy loss rate of at least 1.5 x 10 to the 12th watts. The mean electron temperature and density of the plasma are estimated to be 100,000 K and 2100/cu cm. The estimated number densities of S III, S IV, and O III are roughly 95, 80, and 190-740/cu cm. Upper limits have been placed on a number of other species based on the first published Voyager EUV spectrum of the torus. The assumption that energy is supplied to the torus through injection of neutral particles from Io leads to the conclusion that ion loss rates are controlled by diffusion, and relative species abundances consequently are not controlled by collisional ionization equilibrium.

Shemansky, D. E.↗
NASA NTRS1981

Momentum and energy balance in late-type stellar winds

Observations at ultraviolet and X-ray wavelengths indicate that the classical picture of a static stellar atmosphere containing a radiative equilibrium temperature distribution is inapplicable to the majority of late type stars. Mass loss and the presence of atmospheric regions characterized by gas temperatures in excess of the stellar effective temperature appear to be almost ubiquitous throughout the HR diagram. Evidence pertaining to the thermal and dynamical structure of the outer envelopes of cool stars is summarized. These results are compared with the predictions of several theoretical models which were proposed to account for mass loss from latetype stars. Models in which the outflow is thermally radiatively, or wave driven are considered for identification of the physical processes responsible for the observed wind properties. The observed variation of both the wind, thermal and dynamical structure as one proceeds from the supergiant branch toward the main sequence in the cool portion of the HR diagram give consideration to potential mechanisms for heating and cooling the flow from low gravity stars.

Macgregor, K. B.↗
NASA NTRS1994

Molecular rotational line profiles from oxygen-rich red giant winds

We have developed a radiative transfer model of the dust and gas envelopes around late-type stars. The gas kinetic temperature for each star is calculated by solving equations of motion and the energy balance simultaneously. The main processes include viscous heating and adiabatic and radiative cooling. Heating is dominated by viscosity as the grains stream outward through the gas, with some contribution in oxygen-rich stars by near-IR pumping of H2O followed by collisional de-excitation in the inner envelope. For O-rich stars, rotational H2O cooling is a dominant mechanism in the middle part of the envelope, with CO cooling being less significant. We have applied our model to three well-studied oxygen-rich red giant stars. The three stars cover a wide range of mass-loss rates, and hence they have different temperature structures. The derived temperature structures are used in calculating CO line profiles for these objects. Comparison of the dust and gas mass-loss rates suggests that mass-loss rates are not constant during the asymptotic giant branch phase. In particular, the results show that the low CO 1-0 antenna temperatures of OH/IR stars reflect an earlier phase of much lower mass-loss rate.

Justtanont, K.↗
NASA NTRS1984

Vortex generating flow passage design for increased film-cooling effectiveness and surface coverage

The fluid mechanics of the basic discrete hole film cooling process is described as an inclined jet in crossflow and a cusp shaped coolant flow channel contour that increases the efficiency of the film cooling process is hypothesized. The design concept requires the channel to generate a counter rotating vortex pair secondary flow within the jet stream by virture of flow passage geometry. The interaction of the vortex structures generated by both geometry and crossflow was examined in terms of film cooling effectiveness and surface coverage. Comparative data obtained with this vortex generating coolant passage showed up to factors of four increases in both effectiveness and surface coverage over that obtained with a standard round cross section flow passage. A streakline flow visualization technique was used to support the concept of the counter rotating vortex pair generating capability of the flow passage design.

Papell, S. S.↗
NASA NTRS1977

Mariner 10 data analysis. 1: Scarps, ridges, troughs, and other lineaments on Mercury. 2: Geologic significance of photometric variations on Mercury

Volcanic and tectonic implications of the surface morphology of Mercury are discussed. Mercurian scarps, ridges, troughs, and other lineaments are described and classified as planimetrically linear, arcuate, lobate, or irregular. A global pattern of lineaments is interpreted to reflect modification of linear crustal joints formed in response to stresses induced by tidal spindown. Large arcuate scarps on Mercury most likely record a period of compressional tectonism near the end of heavy bombardment. Shrinkage owing to planetary cooling is the mechanism preferred for their production. Measurements of local normal albedo are combined with computer-generated photometric maps of Mercury to provide constraints on the nature of surface materials and processes. If the mercurian surface obeys the average lunar photometric function, its normal albedo at 554 nm is .16 + or - .03.

Dzurisin, D.↗
NASA NTRS1977

Design and calculated performance and cost of the ECAS Phase II open cycle MHD power generation system

A 2000 MWe MHD/steam plant for central station applications has been designed and costed as part of the Energy Conversion Alternatives Study (ECAS). This plant is fueled by Illinois No. 6 coal, rejects heat through mechanical draft wet cooling towers, and includes coal processing equipment, seed reprocessing, electrical inversion of the MHD generator output and emission controls to current EPA standards. It yields an estimated overall efficiency of 0.483 (7066 Btu/kWe-hr), a capital cost of $718 per kWe (1975 dollars), and a cost of electricity at 65% capacity factor of 32 mills per kWe-hr. If the assumed life and reliability could be achieved with these performance parameters, the MHD system should prove attractive.

Harris, L. P.↗
NASA NTRS1984

Westinghouse programs in pulsed homopolar power supplies

This document details Westinghouse's ongoing study of homopolar machines since 1929 with the major effort occurring in the early 1970's to the present. The effort has enabled Westinghouse to develop expertise in the technology required for the design, fabrication and testing of such machines. This includes electrical design, electromagnetic analysis, current collection, mechanical design, advanced cooling, stress analysis, transient rotor performance, bearing analysis and seal technology. Westinghouse is using this capability to explore the use of homopolar machines as pulsed power supplies for future systems in both military and commercial applications.

Litz, D. C.↗
NASA NTRS1984

Dynamic thermal episodes in the protosolar nebula: Development of models from observations on CAI's

Evaluation of earlier observations indicated that layered rims on coarse-grained Allende CAI's were possibly the result of partial melting by ablation/drag-heating and reaction of CAI exteriors with a gas or gases of non-solar composition. Bunch and Chang reported the common occurrence of thin, fine-grained, matrix-like bands that at least partially surround rims of CAI's. Although material in these bands in general appears to be similar to matrix, SEM observations show them to be dissimilar in volatile element content, mineral composition, and grain morphology. Moreover, they appear to be related in time of formation with rim development and Na-metasomatism of CAI's. Observations indicate a short-lived but intense heating episode followed by radid cooling as the mechanism responsible for these CAI features.

Bunch, T. E.↗
NASA NTRS1985

Mean zonal winds and planetary waves induced by internal gravity wave packets

The generation of mean zonal winds and planetary waves induced by internal gravity wave packets are investigated by numerical experiments. The numerical model is a 3-dimensional primitive equation model on the equatorial beta-plane with boundaries at the equator and North Pole. Because of equatorial boundary conditions, equatorial symmetric modes only are included in the model. Internal gravity wave packets are produced by thermal heating at the bottom boundary. Because of restriction of grid size, convective instability is parameterized by time-independent vertical and horizontal eddy viscosity. Other dissipation mechanisms (e.g., Newtonian cooling, ion drag, molecular viscosity etc.) are also included in the model.

Takahashi, M.↗
NASA NTRS1987

Methods and first results of plasma non-isothermal parameters measurements in meteor trails

There is no reliable experimental evidence so far of either the presence or absence of nonisothermal effects in newly formed meteor trails. Neither is there a common opinion on the most effective mechanism of electron cooling. According to the laboratory experimental data collisions of atomic and molecular particles of all kinds having velocities of 10 to 70/kms often yields 1 eV electrons and not infrequently some have energies reaching several electron volts. These highest energy electrons are referred to as superhot electrons. The method of measurement and the results of these measurements in meteor trails are discussed.

Kostylev, K. K.↗
NASA NTRS1987

Room temperature tensile ductility in powder processed B2 FeAl alloys

It has been shown that it is possible to obtain significant room temperature tensile ductility in FeAl alloys using iron-rich deviations from stoichiometry. A comparison of the room temperature tensile and compressive behaviors of Fe-50 at. pct Al and Fe-40 at. pct Al shows that FeAl is brittle at higher Al contents because it fractures along grain boundaries before general yielding. Lower aluminum contents reduce the yield stress substantially and hence some ductility is observed before fracture. Addition of boron results in measurable improvements in ductility of Fe-40 at. pct Al and is accompanied by an increase in transgranular tearing on the fracture surface, suggesting a grain boundary strengthening mechanism. Increasing the cooling rate following annealing at 1273 K results in a large increase in the yield strength and a corresponding decrease in ductility.

Crimp, M. A.↗
NASA NTRS1990

The influence of gas velocity on surface heat pumping for the orifice pulse tube refrigerator

The basic pulse tube refrigerator produces cooling by a mechanism known as surface heat pumping. Cyclical compression and expansion of a gas within an enclosed tube produces large temperature gradients. The purpose of the tube is to act as 'nodal regenerator'. Heat is stored at node positions along the tube wall and is transported between nodes by moving gas parcels. This process gives rise to refrigeration, with hot temperatures at the closed end and cold temperatures at the open end. Unfortunately, much of the available refrigeration is not realized because the closed end of the basic pulse tube restricts gas movement - gas at the extreme temperatures does not come in contact with the heat exchangers. The orifice pulse tube overcomes this limitation by using a valve and surge volume assembly at the warm, closed end. This allows for a residual gas velocity to remain present during the heat transfer process, thereby permitting more gas to exchange heat at the heat exchangers. This paper describes the pulse tube as a nodal regenerator and the effect residual gas velocity has on the heat transfer mechanism of the orifice pulse tube.

Lee, J. M.↗
NASA NTRS1992

Venus thermospheric response to short-term solar variations

The mechanism responsible for cooling the dayside thermosphere of Venus from about 700 K to 300 K (Noll and McElroy, 1972) is examined by analyzing in situ measurements made by the Pioneer Venus Orbiter of the weak response of the thermosphere to short-term solar variations related to 27-day solar rotation. It is shown that, in order to cool the Venus dayside thermosphere to observed levels and to simultaneously explain the weak 27-day variations in the atmosphere, it is necessary to invoke strong CO2 cooling which is controlled principally by collisions of CO2 with atomic oxygen.

Keating, G. M.↗
NASA NTRS1992

The Germanium GAlactic Plane Patrol mission

The goal of the Germanium GAlactic Plane Patrol mission (GGAPP) is to provide a continuous monitor of the Galactic Plane (GP) for variable sources of gamma-ray lines. Potentially interesting sources include black hole candidates, X-ray binary systems, pulsars, gamma-ray bursts, and solar flares. The GGAPP instrument is an array of Ge detectors cooled by a mechanical refrigerator to achieve a spectral resolution of 2 keV at 1 MeV (1/500). A bismuth germanate (BGO) shield will restrict the field-of-view (FOV) to within 20 deg of the GP, and a modulation collimator system will locate strong sources to less than 0.3 deg in galactic longitude, provide a direct means of subtracting background, and mapping the diffuse emission from the GP. The spacecraft will be rotationally stabilized with the spin axis perpendicular to the GP such that the modulator scans in galactic longitude. A HEO or L1 orbit will keep GGAPP far away from the strong background produced by the Earth. GGAPP will provide a natural bridge between GRO and future missions such as INTEGRAL/NAE.

Tueller, Jack↗