Search NASA⌕ Search

SEARCH · Search NASA

Results for “Micro Fuel Cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Physical model and experimental validation of a high temperature proton exchange membrane electrochemical hydrogen pump cell for efficient single-stage extraction of low concentration hydrogen gas

There is interest in valorization of existing natural gas infrastructure to facilitate the co-transportation of hydrogen via blending of hydrogen gas initially at limited concentrations of 1–20 vol% H2 and to subsequently extract hydrogen at fuel cell quality standards (SAE J2719/ISO14687-2). High temperature proton exchange membrane electrochemical hydrogen pump (HT-PEM EHP) based on phosphoric acid doped polybenzimidazole (PA-PBI) exhibits good performance at elevated temperatures (>120 °C), which provides desirable tolerance to non-methane natural gas constituents that are problematic for lower temperature based EHP. To better understand the suitability of the HT-PEM EHP for such gas separation processes, a two-dimensional model of EHP based on PA-PBI was developed. The model is validated for several relevant operating conditions and across cells with differing amounts of phosphoric acid content in the electrodes. Operando micro x-ray computed tomography (CT) imaging of an HT-PEM EHP was used to further validate physical parameters and assumptions of the model. The impacts of pressure, relative humidity of the anode feed, and concentration of feed gases on separation performance are investigated. This study shows that a specific energy of separation of 5.1 kWh/kg H2 at a hydrogen recovery factor (HRF) of 50 vol% can be achieved in a single stage with the EHP, producing fuel cell quality hydrogen purity of 99.99 vol% H2 from a 2 vol% H2/CH4 feed blend, while pressurizing the product H2 at a pressure ratio of 1.3 relative to feed pressure.

Stansberry, John M↗

Understanding Carbon Dioxide Transfer in Direct Methanol Fuel Cells Using a Pore-Scale Model

Abstract The gas flow of carbon dioxide from the catalyst layer (CL) through the microporous layer (MPL) and gas diffusion layer (GDL) has great impacts on the water and fuel management in direct methanol fuel cells (DMFCs). This work has developed a liquid–vapor two-phase model considering the counter flow of carbon dioxide gas, methanol, and water liquid solution in porous electrodes of DMFC. The model simulation includes the capillary pressure as well as the pressure drop due to flow resistance through the fuel cell components. The pressure drop of carbon dioxide flow is found to be about two to three orders of magnitude higher than the pressure drop of the liquid flow. The big difference between liquid and gas pressure drops can be explained by two reasons: volume flowrate of gas is three orders of magnitude higher than that of liquid; only a small fraction of pores (<5%) in hydrophilic fuel cell components are available for gas flow. Model results indicate that the gas pressure and the mass transfer resistance of liquid and gas are more sensitive to the pore size distribution than the thickness of porous components. To buildup high gas pressure and high mass transfer resistance of liquid, the MPL and CL should avoid micro-cracks during manufacture. Distributions of pore size and wettability of the GDL and MPL have been designed to reduce the methanol crossover and improve fuel efficiency. The model results provide design guidance to obtain superior DMFC performance using highly concentrated methanol solutions or even pure methanol.

Electrochemistry↗

Enhanced Water Management of Polymer Electrolyte Fuel Cells with Additive-Containing Microporous Layers

This work describes the performance improvement of a polymer electrolyte fuel cell with a novel class of microporous layers (MPLs) that incorporates hydrophilic additives: one with 30 μm aluminosilicate fibers and another with multiwalled carbon nanotubes with a domain size of 5 μm. Higher current densities at low potentials were observed for cells with the additive-containing MPLs compared to a baseline cell with a conventional MPL, which correlate with improvements in water management. This is also observed for helium and oxygen experiments and by the lower amount of liquid water in the cell, as determined by neutron radiography. Furthermore, carbon-nanotube-containing MPLs demonstrates improved durability compared to the baseline MPL. Microstructural analyses including nanotomography demonstrate that the filler material in both the additive-containing MPLs provide preferential transport pathways for liquid water, which correlate with ex situ measurements. In conclusion, the main advantage provided by these MPLs is improved liquid-water removal from the cathode catalyst layer, resulting in enhanced oxygen delivery to the electrocatalyst sites.

25 ENERGY STORAGE↗

Regenerative Performance of the NASA Symmetrical Solid Oxide Fuel Cell Design

The NASA Glenn Research Center is developing both a novel cell design (BSC) and a novel ceramic fabrication technique to produce fuel cells predicted to exceed a specific power density of 1.0 kW/kg. The NASA Glenn cell design has taken a completely different approach among planar designs by removing the metal interconnect and returning to the use of a thin, doped LaCrO3 interconnect. The cell is structurally symmetrical. Both electrodes support the thin electrolyte and contain micro-channels for gas flow-- a geometry referred to as a bi-electrode supported cell or BSC. The cell characteristics have been demonstrated under both SOFC and SOE conditions. Electrolysis tests verify that this cell design operates at very high electrochemical voltage efficiencies (EVE) and high H2O conversion percentages, even at the low flow rates predicted for closed loop systems encountered in unmanned aerial vehicle (UAV) applications. For UAVs the volume, weight and the efficiency are critical as they determine the size of the water tank, the solar panel size, and other system requirements. For UAVs, regenerative solid oxide fuel cell stacks (RSOFC) use solar panels during daylight to generate power for electrolysis and then operate in fuel cell mode during the night to power the UAV and electronics. Recent studies, performed by NASA for a more electric commercial aircraft, evaluated SOFCs for auxiliary power units (APUs). System studies were also conducted for regenerative RSOFC systems. One common requirement for aerospace SOFCs and RSOFCs, determined independently in each application study, was the need for high specific power density and volume density, on the order of 1.0 kW/kg and greater than 1.0 kW/L. Until recently the best reported performance for SOFCs was 0.2 kW/kg or less for stacks. NASA Glenn is working to prototype the light weight, low volume BSC design for such high specific power aerospace applications.

Cable, Thomas L.↗

Modeling of Thermal Performance of Multiphase Nuclear Fuel Cell Under Variable Gravity Conditions

A unique numerical method has been developed to model the dynamic processes of bulk evaporation and condensation processes, associated with internal heat generation and natural convection under different gravity levels. The internal energy formulation, for the bulk liquid-vapor phase change problems in an encapsulated container, was employed. The equations, governing the conservation of mass, momentum and energy for both phases involved in phase change, were solved. The thermal performance of a multiphase uranium tetra-fluoride fuel element under zero gravity, micro-gravity and normal gravity conditions has been investigated. The modeling yielded results including the evolution of the bulk liquid-vapor phase change process, the evolution of the liquid-vapor interface, the formation and development of the liquid film covering the side wall surface, the temperature distribution and the convection flow field in the fuel element. The strong dependence of the thermal performance of such multiphase nuclear fuel cell on the gravity condition has been revealed. Under all three gravity conditions, 0-g, 10(exp -3)-g, and 1-g, the liquid film is formed and covers the entire side wall. The liquid film covering the side wall is more isothermalized at the wall surface, which can prevent the side wall from being over-heated. As the gravity increases, the liquid film is thinner, the temperature gradient is larger across the liquid film and smaller across the vapor phase. This investigation provides valuable information about the thermal performance of multi-phase nuclear fuel element for the potential space and ground applications.

Ding, Z.↗

Process for making ceramic insulation

A method is provided for producing insulation materials and insulation for high temperature applications using novel castable and powder-based ceramics. The ceramic components produced using the proposed process offers (i) a fine porosity (from nano-to micro scale); (ii) a superior strength-to-weight ratio; and (iii) flexibility in designing multilayered features offering multifunctionality which will increase the service lifetime of insulation and refractory components used in the solid oxide fuel cell, direct carbon fuel cell, furnace, metal melting, glass, chemical, paper/pulp, automobile, industrial heating, coal, and power generation industries. Further, the ceramic components made using this method may have net-shape and/or net-size advantages with minimum post machining requirements.

36 MATERIALS SCIENCE↗

Development of Novel Non-Pt Group Metal Electrocatalysts for PEM Fuel Cell Applications

The objective of this multi-institutional effort was to comprehensively pursue the goal of eliminating noble metal (Pt group metals, PGM) from the cathodic oxygen reduction reaction (ORR) electrode thereby providing a quantum leap in lowering the overall PGM loading in a polymer electrolyte fuel cell (PEMFC). The overall project scope encompassed (a) comprehensive materials discovery effort, (b) a concomitant effort to scale up these materials with very high ( ±5%) reproducibility, both intra and inter, (c) understanding mass transport in porous medium both in gas diffusion and micro-porous layers for enhanced areal activity, (d) understanding mechanistic aspects of active site structure and ORR electrocatalytic pathway. Overall project milestones and metrics were (a) first phase effort based on performance in oxygen where the project’s Go/No-Go decision point milestone of 100 mA/cm 2 at 0.8 V (internal resistance-free, iR-free) at 80°C, pure H 2 /O 2 , with 1.5 bar total pressure was met. Subsequently, the principle objectives were to (a) transition the project from H 2 /O 2 to H 2 /Air with slated target of exceeding 30 mA/cm 2 @ 0.8 V, 2.5 bar total pressure and an end of the project target of 1 A/cm 2 @ 0.4 V (same total pressure), both under 100% relative humidity. The target for catalyst material scale up was to achieve 100 g batch size at the end of the program. This scale up target had a quality control milestone of less than 5% variation of activity measured with H 2 /Air (2.5 bar total pressure) at 0.8 V. In addition, the project also aimed at arriving at a unified understanding of the nature of active sites in these catalysts as well as some preliminary understanding of the mechanistic pathway. Also addressed is the development of an integrated method for determination of mass transport parameters using a combination of Helox experiments and modeling of the gas diffusion media, especially the micro-porous layer on the gas diffusion electrode (GDE). Detailed aspects of technical metrics and milestones are provided in Table 1 of the final report. Besides the success in meeting the DOE milestones in areal activities for oxygen and air described above one of the key successes of this effort was in understanding the nature of the active site(s) and aspects of the ORR pathway. In this it should be noted that the materials discovery effort provided for use of unconventional approaches, some of which led to very active catalysts. This aspect is described in detail in the final report. From a mechanistic perspective, a combination spectroscopic techniques confirmed that the high activity observed for most pyrolyzed Fe-based catalysts, irrespective of the precursors materials (macrocycles or individual Fe, N, and C precursors), the synthesis method (wet chemical impregnation or SSM), and final Fe-species (with or without inorganic iron species), can mainly be attributed to a single active site: non-planar Fe-N 4 moiety embedded in distorted carbon matrix characterized by a high potential for the Fe 2+/3+ redox transition in acidic electrolyte/environment, which is likely formed via the covalent incorporation of distorted Fe-N4 moieties in the defective centers on the carbon basal plane or in armchair edges of two adjacent graphene layers. This Fe 2+ -N 4 active site at 0.3 V undergoes redox transition to a pentacoordinate HO₋Fe 3+ ₋N 4 at 0.90 V, and the adsorption of the *OH trigged by the Fe 2+ /Fe 3+ redox transition poisons the active sites, thereby providing experimental evidence of the redox mechanism. Moreover, a highly active MOF-based catalyst devoid of any Fe-N moieties was also developed, and the active sites were identified as nitrogen-doped carbon fibers with embedded iron particles that are not directly involved in the oxygen reduction pathway. The high ORR activity and durability of catalysts involving this site in fuel cells are attributed to the high density of active sites and the elimination or reduction of Fenton-type processes. The latter are initiated by hydrogen peroxide but are known to be accelerated by iron ions exposed to the surface, resulting in the formation of damaging free-radicals. We expect that the comprehensive understanding of the synthesis-products correlations, nature of active sites, and the reaction mechanisms acquired here by systematically studying a broad variety of M-N-C materials under in situ conditions will provide guidelines to rational design of this type of non-PGM catalysts.

08 HYDROGEN↗

Investigating Phase-Change-Induced Flow in Gas Diffusion Layers in Fuel Cells with X-ray Computed Tomography

The performance of polymer-electrolyte fuel cells is heavily dependent on proper management of liquid water. One particular reason is that liquid water can collect in the gas diffusion layers (GDLs) blocking the reactant flow to the catalyst layer. This results in increased mass-transport losses. At higher temperatures, evaporation of water becomes a dominant water-removal mechanism and specifically phase-change-induced (PCI) flow is present due to thermal gradients. This study used synchrotron based micro X-ray computed tomography (CT) to visualize and quantify the water distribution within gas diffusion layers subject to a thermal gradient. Plotting saturation as a function of through-plane distance quantitatively shows water redistribution, where water evaporates at hotter locations and condenses in colder locations. The morphology of the 2 GDLs on the micro-scale, as well as evaporating water clusters, are resolved, indicating that the GDL voids are slightly prolate, whereas water clusters are oblate. From the mean radii of water distributions and visual inspection, it is observed that larger water clusters evaporate faster than smaller ones.

25 ENERGY STORAGE↗

Abstract - Cooperative Research and Development Agreement between AK Supply, Inc. and National Energy Technology Laboratory

The main goal of CRADA between AK Supply and NETL is to redesign the solid oxide fuel cell configuration for hybrid power generation systems for greater flexibility and operability. The new fuel cell design will consider incorporation of thermal energy storage into the fuel cell by modifying the material composition to increase the specific heat and/or the solid-solid phase transition and increasing the interconnect geometry (mass and volume) in the fuel cell. This developed technology will be tested using Hyper facility at NETL, Morgantown, to evaluate the performance in hybrid applications. Additionally, AK Supply and NETL will work on the development of a real-time, high temperature, intelligent micro-sensor for monitoring energy availability in the interconnect geometry. The will be used for control of stored energy release during load transients and will be tested on the NETL Hyper facility.

25 ENERGY STORAGE↗

SELF-LIMITING TRANSIENT PULSE SIMULATION METHOD EXHIBITING TIME LAG PHENOMENON USING MAMMOTH

Coupling of multi-physics and multi-scale allows the exploration of phenomenon not previously studied with high fidelity. The heat diffusion time lag in TREAT-like fuel requires both multi-physics and multi-scale coupling to model the full transient behavior. The reactor physics code MAMMOTH, which has the ability to couple the heat conduction equation and the neutron diffusion equation, simulated a self-limiting transient pulse meeting these requirements. The MOOSE MultiApp system allowed the coupling of many micro-scale simulations with a single macro-scale simulation. The micro-scale geometry was a 0.0044 cm diameter UO2 fuel grain surrounded by a graphite moderator. The macro-scale geometry was a homogeneous fuel with the same isotope ratio of the micro-scale material surrounded by a graphite reflector. Two temperature-dependent two energy group cross-section libraries were computed using Serpent 2 for use in MAMMOTH. Both the homogeneous unit cell and heterogeneous unit cell cross-section library had infinite reactor boundary conditions. The macro-scale simulation had finite boundary conditions. By varying the feedback temperature, macro or micro, given to the cross-sections, the effect of the time lag was explored using a Picard coupling method. The time lag increases the peak power density by 9 % to 10 % and the energy deposited by 8 % to 9 %. The effect of differing grain and moderator temperature at the micro-scale was also explored showing differences in time lag behavior. Future research will improve the fidelity of the method through representative macro-scale geometries, temperature-dependent cross-sections, and greater energy group resolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of a Micro-Fiber Nickel Electrode for Nickel-Hydrogen Cell

The development of a high specific energy battery is one of the objectives of the lightweight nickel-hydrogen (NiH2) program at the NASA Lewis Research Center. The approach has been to improve the nickel electrode by continuing combined in-house and contract efforts to develop a more efficient and lighter weight electrode for the nickel-hydrogen fuel cell. Small fiber diameter nickel plaques are used as conductive supports for the nickel hydroxide active material. These plaques are commercial products and have an advantage of increased surface area available for the deposition of active materials. Initial tests include activation and capacity measurements at different discharge levels followed by half-cell cycle testing at 80 percent depth-of-discharge in a low Earth orbit regime. The electrodes that pass the initial tests are life cycle tested in a boiler plate nickel-hydrogen cell before flightweight designs are built and tested.

Britton, Doris L.↗

Layed Perovskite PRBA0.5SR0.5CO205 as High Performance Cathode for Solid Oxide Fuels Using Photon Conducting Electrolyte

The layered perovskite PrBa{sub 0.5}Sr{sub 0.5}Co{sub 2}O{sub 5+{delta}} (PBSC) was investigated as a cathode material for a solid oxide fuel cell using a proton-conducting electrolyte based on BaCe{sub 0.7}Y{sub 0.2}Zr{sub 0.1}O{sub 3-{delta}} (BCYZ). The sintering conditions for the PBSC-BCYZ composite cathode were optimized resulting in the lowest area-specific resistance and apparent activation energy obtained with the cathode sintered at 1200 C for 2h. The maximum power densities of the PBSC-BCYZ/BZCY/NiO-BCYZ cell were 0.179, 0.274, 0.395, and 0.522 Wcm{sup -2} at 550, 600, 650, and 700 C, respectively with a 15{micro}m thick electrolyte. A relatively low cell interfacial polarization resistance of 0.132 {Omega}cm{sup 2} at 700 C indicated that the PBSC-BCYZ could be a good cathode candidate for intermediate temperature SOFCs with proton-conducting electrolyte.

30 DIRECT ENERGY CONVERSION↗

Synthesis, characterization and mechanical properties of NiO - GDC20 (Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9}) nano composite anode for solid oxide fuel cells

In the present research work, X (NiO) +1-X(Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9}) where X = 30,40 and 45 wt% Nano Composite Anodes are synthesized for low temperature operating solid oxide fuel cells (SOFC). NiO and Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9} (GDC20) are synthesized by sol-gel citrate method and the nanopowders of NiO, GDC20 were calcined from 650 °c to 750 °c. For anode materials, pelletized the nanocomposites of X(NiO)+ (1-X) GDC20 (X = 30,40,45 wt.%) and sintered at 1200 °c. systematic study of atomic structure, purity, phase and structural parameters such as Lattice parameters, crystallite size of as-synthesized nanopowders and anode materials were carried out by XRD and SEM. For mechanical strength, Vickers micro-hardness of anode composites were estimated and observed that micro-hardness of composites were increasing with NiO wt.% and the density of sintered samples, which is varying from 4.35 to 5.54 Gpa at 500g load.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantifying intermediate-frequency heterogeneities of SOFC electrodes using X-ray computed tomography

The electrodes in solid oxide fuel cells (SOFCs) consist of three phases interconnected in three dimensions. The volume needed to describe quantitatively such microstructures depends on several lengths scales, which are functions of materials properties and fabrication methods. This work focuses on quantifying the volume needed to represent “intermediate frequency” heterogeneities in electrodes of a commercial SOFC using X-ray computed tomography (CT) over two different length scales. Electrode volumes of 150 x 150 x 9 μm 3 were extracted from a synchrotron-based micro-CT data set, with 13 μm 3 voxels. 13.6 x 19.8 x 19.4 μm 3 of the cathode and 26.3 x 24.8 x 15.7 μm 3 of the anode were extracted from laboratory nano-CT data sets, both with 65 3 nm 3 voxels. After comparing the variation across sub-regions for the greyscale values from the micro-CT, and for the phase fractions and triple phase boundary densities from the nano-CT, it was found that the sub-region length scales needed to yield statistically similar average values were an order of magnitude larger than those expected to capture the “high frequency” heterogeneity related to the discrete nature of the three phases in electrodes. In conclusion, the challenge of quantifying such electrodes using available experimental methods is discussed.

36 MATERIALS SCIENCE↗

Cellulose hydrolysis by Clostridium thermocellum is agnostic to substrate structural properties in contrast to fungal cellulases

The native recalcitrance of lignocellulosic biomass hinders its effective deconstruction for biological conversion to fuel ethanol. However, once cellulose is physically available to enzymes/microbes, i.e., macro-accessible, cellulose micro-accessibility, i.e., the accessibility as influenced by cellulose properties, further affects cellulose conversion. Here, we performed a comparative study of the effect of cellulose micro-accessibility on cellulose conversion by two biological approaches of potential commercial interest: consolidated bioprocessing (CBP) using Clostridium thermocellum and cell-free saccharification mediated by fungal enzymes. Commercially available cellulosic substrates, Avicel® PH-101, Sigmacell Cellulose Type 50, cotton linters, Whatman™ 1 milled filter paper, and α-cellulose were employed to constitute different cellulose micro-accessibilities. Physiochemical characterization was performed on these substrates to determine key morphological and chemical differences. Biological conversion of these substrates showed that C. was unaffected overall by cellulose structural properties, i.e., micro-accessibility, and achieved similar solids solubilization and metabolite production from these structurally different materials. However, fungal enzymes digested these substrates to different extents. Specifically, glucan conversion of these substrates diminished in the following order: milled filter paper > Avicel > Sigmacell and α-cellulose > cotton linters. Here, we propose that C. thermocellum digestion of lignocellulosic biomass is primarily controlled by the physical availability of cellulose in the lignocellulosic matrix and largely unaffected by cellulose properties once cellulose is made macro-accessible. Finally, in contrast, fungal enzymes require cellulose to be physically accessible, i.e., macro-accessible, as well as have properties amenable to digestion, i.e., micro-accessible.

09 BIOMASS FUELS↗