Search NASASearch

SEARCH · Search NASA

Results for “Model generalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Global aspects of the Los Alamos general circulation model hydrologic cycle

The global hydrologic cycle in the Los Alamos general circulation model (GCM) is compared to available global observations. Global observations of the water vapor, water-vapor flux and water-vapor flux divergence are derived from the National Meteorological Center's final analysis for the period 1986-1989. The new precipitation data set of Legates and Willmott (1990) is used for the global precipitation observations. Global evaporation is derived as a residual of the precipitation and water-vapor flux divergence. There are a number of similarities as well as discrepancies between the GCM and observations. The large-scale nondivergent and divergent GCM circulations are remarkably similar to the observed circulations; the large-scale GCM precipitation and evaporation patterns are also qualitatively similar to observations. Discrepancies are mainly quantitative and small-scale in nature: the GCM atmosphere is relatively dry which results in a slightly greater evaporation and precipitation rate than is observed; the GCM South Pacific convergence zone is displaced too far to the northwest.

Roads, J. O.

A proposal for the intercomparison of the dynamical cores of atmospheric general circulation models

A benchmark calculation is proposed for evaluating the dynamical cores of atmospheric general circulation models (GCMs) independently of the physical parameterizations. The test focuses on the long-term statistical properties of a fully developed general circulation; thus, it is particularly appropriate for intercomparing the dynamics used in climate models. To illustrate the use of this benchmark, two very different atmospheric dynamical cores--one spectral, one finite difference--are compared. It is found that the long-term statistics produced by the two models are very similar. Selected results from these calculations are presented to initiate the intercomparison.

Held, Isaac M.

Surface Lander Missions to Mars: Support via Analysis of the NASA Ames Mars General Circulation Model

We have characterized the near-surface martian wind environment as calculated with a set of numerical simulations carried out with the NASA Ames Mars General Circulation Model (Mars GCM). These wind environments are intended to offer future spacecraft missions to the martian surface a data base from which to choose those locations which meet the mission's criteria for minimal near surface winds to enable a successful landing. We also became involved in the development and testing of the wind sensor which is currently onboard the Mars-bound Pathfinder lander. We began this effort with a comparison of Mars GCM produced winds with those measured by the Viking landers during their descent through the martian atmosphere and their surface wind measurements during the 3+ martian year lifetime of the mission. Unexpected technical difficulties in implementing the sophisticated Planetary Boundary Layer (PBL) scheme of Haberle et al. (1993) within the Mars GCM precluded our carrying out this investigation with the desired improvement to the model's treatment of the PBL. Thus, our results from this effort are not as conclusive as we had anticipated. As it turns out, similar difficulties have been experienced by other Mars modelling groups in attempting to implement very similar PBL routines into their GCMs (Mars General Circulation Model Intercomparison Workshop, held at Oxford University, United Kingdom, July 22-24, 1996; organized by J. Murphy, J. Hollingsworth, M. Joshi). These problems, which arise due to the nature of the time stepping in each of the models, are near to being resolved at the present. The model discussions which follow herein are based upon results using the existing, less sophisticated PBL routine. We fully anticipate implementing the tools we have developed in the present effort to investigate GCM results with the new PBL scheme implemented, and thereafter producing the technical document detailing results from the analysis tools developed during this effort. Producing such a document now would be premature.

Murphy, James R.

A general circulation model study of atmospheric carbon monoxide

The carbon monoxide cycle is studied by incorporating the known and hypothetical sources and sinks in a tracer model that uses the winds generated by a general circulation model. Photochemical production and loss terms, which depend on OH radical concentrations, are calculated in an interactive fashion. The computed global distribution and seasonal variations of CO are compared with observations to obtain constraints on the distribution and magnitude of the sources and sinks of CO, and on the tropospheric abundance of OH. The simplest model that accounts for available observations requires a low latitude plant source of about 1.3 x 10 to the 15th g/yr, in addition to sources from incomplete combustion of fossil fuels and oxidation of methane. The globally averaged OH concentration calculated in the model is 750,000/cu cm. Models that calculate globally averaged OH concentrations much lower than this nominal value are not consistent with the observed variability of CO. Such models are also inconsistent with measurements of CO isotopic abundances, which imply the existence of plant sources.

Pinto, J. P.

Greenstone belt tectonics: Thermal constraints

Archaean rocks provide a record of the early stages of planetary evolution. The interpretation is frustrated by the probable unrepresentative nature of the preserved crust and by the well known ambiguities of tectonic geological synthesis. Broad constraints can be placed on the tectonic processes in the early Earth from global scale modeling of thermal and chemical evolution of the Earth and its hydrosphere and atmosphere. The Archean record is the main test of such models. Available general model constraints are outlined based on the global tectonic setting within which Archaean crust evolved and on the direct evidence the Archaean record provides, particularly the thermal state of the early Earth.

Bickle, M. J.

A Modeling Investigation of Thermal and Strain Induced Recovery and Nonlinear Hardening in Potential Based Viscoplasticity

Specific forms for both the Gibb's and the complementary dissipation potentials were chosen such that a complete potential based multiaxial, isothermal, viscoplastic model was obtained. This model in general possesses three internal state variables (two scalars associated with dislocation density and one tensor associated with dislocation motion) both thermal and dynamic recovery mechanisms, and nonlinear kinematic hardening. This general model, although possessing associated flow and evolutionary laws, is shown to emulate three distinct classes of theories found in the literature, by modification of the driving threshold function F. A parametric study was performed on a specialized nondimensional multiaxial form containing only a single tensorial internal state variable (i.e., internal stress). The study was conducted with the idea of examining the impact of including a strain-induced recovery mechanism and the compliance operator, derived from the Gibb's potential, on the uniaxial and multiaxial response. One important finding was that inclusion of strain recovery provided the needed flexibility in modeling stress-strain and creep response of metals at low homologous temperatures, without adversely affecting the high temperature response. Furthermore, for nonproportional loading paths, the inclusion of the compliance operator had a significant influence on the multiaxial response, but had no influence on either uniaxial or proportional load histories.

Arnold, S. M.

Validation of PICA Ablation and Thermal-Response Model at Low Heat Flux

Phenolic Impregnated Carbon Ablator (PICA) was the forebody heatshield material on the Stardust sample-return capsule and is also a primary candidate material for the Mars Science Lander (MSL), the Orion Crew Module, and the SpaceX Dragon vehicle. As part of the heatshield qualification for Orion, physical and thermal properties of virgin and charred PICA were measured, and an ablation and thermal response model was developed. We validated the model by comparing it with recession and temperature data from stagnation arcjet tests conducted over a wide range of stagnation heat flux of 107 to 1102 W/sq cm. The effect of orthotropic thermal conductivity was evident in the thermal response of the arcjet models. In general, model predictions compared well with the data; however, the uncertainty of the recession prediction was greatest for heat fluxes below 200 W/sq cm. More recent MSL testing focused on the low heat flux regime of 45 to 250 W/sq cm. The new results confirm the recession uncertainty, especially for pressures below 6 kPa. In this work we focus on improving the model predictions for MSL and Orion tests below 250 W/sq cm.

Milos, Frank S.

Analytical Round Robin for Elastic-Plastic Analysis of Surface Cracked Plates: Phase I Results

An analytical round robin for the elastic-plastic analysis of surface cracks in flat plates was conducted with 15 participants. Experimental results from a surface crack tension test in 2219-T8 aluminum plate provided the basis for the inter-laboratory study (ILS). The study proceeded in a blind fashion given that the analysis methodology was not specified to the participants, and key experimental results were withheld. This approach allowed the ILS to serve as a current measure of the state of the art for elastic-plastic fracture mechanics analysis. The analytical results and the associated methodologies were collected for comparison, and sources of variability were studied and isolated. The results of the study revealed that the J-integral analysis methodology using the domain integral method is robust, providing reliable J-integral values without being overly sensitive to modeling details. General modeling choices such as analysis code, model size (mesh density), crack tip meshing, or boundary conditions, were not found to be sources of significant variability. For analyses controlled only by far-field boundary conditions, the greatest source of variability in the J-integral assessment is introduced through the constitutive model. This variability can be substantially reduced by using crack mouth opening displacements to anchor the assessment. Conclusions provide recommendations for analysis standardization.

Wells, D. N.

A Tropospheric Emission Spectrometer HDO/H2O Retrieval Simulator for Climate Models

Retrievals of the isotopic composition of water vapor from the Aura Tropospheric Emission Spectrometer (TES) have unique value in constraining moist processes in climate models. Accurate comparison between simulated and retrieved values requires that model profiles that would be poorly retrieved are excluded, and that an instrument operator be applied to the remaining profiles. Typically, this is done by sampling model output at satellite measurement points and using the quality flags and averaging kernels from individual retrievals at specific places and times. This approach is not reliable when the model meteorological conditions influencing retrieval sensitivity are different from those observed by the instrument at short time scales, which will be the case for free-running climate simulations. In this study, we describe an alternative, categorical approach to applying the instrument operator, implemented within the NASA GISS ModelE general circulation model. Retrieval quality and averaging kernel structure are predicted empirically from model conditions, rather than obtained from collocated satellite observations. This approach can be used for arbitrary model configurations, and requires no agreement between satellite-retrieved and model meteorology at short time scales. To test this approach, nudged simUlations were conducted using both the retrieval-based and categorical operators. Cloud cover, surface temperature and free-tropospheric moisture content were the most important predictors of retrieval quality and averaging kernel structure. There was good agreement between the D fields after applying the retrieval-based and more detailed categorical operators, with increases of up to 30 over the ocean and decreases of up to 40 over land relative to the raw model fields. The categorical operator performed better over the ocean than over land, and requires further refinement for use outside of the tropics. After applying the TES operator, ModelE had D biases of 8 over ocean and 34 over land compared to TES D, which were less than the biases using raw model D fields.

Field, R. D.

Impacts of Soil-aquifer Heat and Water Fluxes on Simulated Global Climate

Climate models have traditionally only represented heat and water fluxes within relatively shallow soil layers, but there is increasing interest in the possible role of heat and water exchanges with the deeper subsurface. Here, we integrate an idealized 50m deep aquifer into the land surface module of the GISS ModelE general circulation model to test the influence of aquifer-soil moisture and heat exchanges on climate variables. We evaluate the impact on the modeled climate of aquifer-soil heat and water fluxes separately, as well as in combination. The addition of the aquifer to ModelE has limited impact on annual-mean climate, with little change in global mean land temperature, precipitation, or evaporation. The seasonal amplitude of deep soil temperature is strongly damped by the soil-aquifer heat flux. This not only improves the model representation of permafrost area but propagates to the surface, resulting in an increase in the seasonal amplitude of surface air temperature of >1K in the Arctic. The soil-aquifer water and heat fluxes both slightly decrease interannual variability in soil moisture and in landsurface temperature, and decrease the soil moisture memory of the land surface on seasonal to annual timescales. The results of this experiment suggest that deepening the modeled land surface, compared to modeling only a shallower soil column with a no-flux bottom boundary condition, has limited impact on mean climate but does affect seasonality and interannual persistence.

soil

A Second-Order Closure Turbulence Model: New Heat Flux Equations and No Critical Richardson Number

We formulate a new second-order closure turbulence model by employing a recent closure for the pressure-temperature correlation at the equation level. As a result, we obtain new heat flux equations that avoid the long-standing issue of a finite critical Richardson number. The new, structurally simpler model improves on the Mellor-Yamada 1982 and Galperin et al. 1988 models; key feature includes enhanced mixing under stable conditions facilitating agreement with observational, experimental and high-resolution numerical data sets. The model predicts a planetary boundary layer height deeper than predicted by models with low critical Richardson numbers, as demonstrated in single column model runs of the GISS ModelE general circulation model.

second-order closure turbulence model

Net diffusivity in ocean general circulation models with nonuniform grids

The numerical vertical diffusivity K(num), embedded in a numerical ocean general circulation model with nonuniform vertical grid, is estimated. It is shown that in a downwelling region, K(num) is negative for a grid with grid size increasing with depth. When the grid size increment, or the downward vertical velocity, is large, K(num) may exceed the vertical diffusivity specified and may result in a negative effective vertical diffusivity. Therefore care needs to be taken to specify the vertical diffusivity in a numerical model with nonuniform grid, and a lower bound is generally imposed in order to avoid an unphysical negative value. Some possible effects of the negative effective diffusivity are discussed.

Yin, F. L.

A general circulation model of a Venus-like atmosphere

Heat and momentum budgets are investigated for a three-dimensional general circulation model of a Venus-like, massive and slowly rotating atmosphere which is forced with an axisymmetric radiative heating/cooling distribution. Model results confirm the suggestions of Gierasch (1975) and Rossow and Williams (1979), with a mean meridional circulation which, despite its multicellular form, interacts with quasi-barotropic eddies produced by zonal flow shear instability to yield a weak superrotation of the entire model atmosphere. This process is sufficiently general to encourage the conclusion that it will occur in all slowly rotating atmospheres. Whether it can accelerate wind speeds as large as those observed on Venus cannot presently be determined.

Rossow, W. B.

Analysis of a general circulation model product. I - Frontal systems in the Brazil/Malvinas and Kuroshio/Oyashio regions

The general circulation model (GCM) of Semtner and Chervin (1992) is tested by comparing the fields produced by this model with available observations in two western boundary current regions, the Brazil/Malvinas and the Kuroshio/Oyashio confluences. The two sets of data used are the sea surface temperature from satellite observations and the temperature field product from the GCM at levels 1 (12.5 m), 2 (37.5 m), and 6 (160 m). It is shown that the model reproduces intense thermal fronts at the sea surface and in the upper layers (where they are induced by the internal dynamics of the model). The location of the fronts are reproduced in the model within 4 to 5 deg, compared with observations. However, the variability of these fronts was found to be less pronounced in the model than in the observations.

Garzoli, Silvia L.

Input/output models for general aviation piston-prop aircraft fuel economy

A fuel efficient cruise performance model for general aviation piston engine airplane was tested. The following equations were made: (1) for the standard atmosphere; (2) airframe-propeller-atmosphere cruise performance; and (3) naturally aspirated engine cruise performance. Adjustments are made to the compact cruise performance model as follows: corrected quantities, corrected performance plots, algebraic equations, maximize R with or without constraints, and appears suitable for airborne microprocessor implementation. The following hardwares are recommended: ignition timing regulator, fuel-air mass ration controller, microprocessor, sensors and displays.

Sweet, L. M.

The design and performance of a real-time self excited vocoder

This paper is concerned with a generic class of predictive speech coders that includes the newly proposed Self Excited Vocoder (SEV) and the well known Code-Excited Linear Predictive Coder (CELPC). All members of this class form an excitation sequence for a linear predictive model filter using the same general model for the excitation signal. The general excitation model is based on a block coding technique where each sequence is drawn from an ensemble of sequences. This paper reports on two developments related to this general model. The first development is a new type of excitation ensemble that can in general be populated by many different types of sequences. The second development is a means of populating this new type of ensemble based on a vector quantizer design procedure using a new distortion measure.

Rose, Richard C.

Intercomparison and interpretation of surface energy fluxes in atmospheric general circulation models

Responses of the surface energy budgets and hydrologic cycles of 19 atmospheric general circulation models to an imposed, globally uniform sea surface temperature perturbation of 4 K were analyzed. The responses of the simulated surface energy budgets are extremely diverse and are closely linked to the responses of the simulated hydrologic cycles. The response of the net surface energy flux is not controlled by cloud effects; instead, it is determined primarily by the response of the latent heat flux. The prescribed warming of the oceans leads to major increases in the atmospheric water vapor content and the rates of evaporation and precipitation. The increased water vapor amount drastically increases the downwelling IR radiation at the earth's surface, but the amount of the change varies dramatically from one model to another.

Randall, D. A.

Circulation and rainfall climatology of a 10-year (1979 - 1988) integration with the Goddard Laboratory for atmospheres general circulation model

A 10-year (1979-1988) integration of Goddard Laboratory for Atmospheres (GLA) general circulation model (GCM) under Atmospheric Model Intercomparison Project (AMIP) is analyzed and compared with observation. The first momentum fields of circulation variables and also hydrological variables including precipitation, evaporation, and soil moisture are presented. Our goals are (1) to produce a benchmark documentation of the GLA GCM for future model improvements; (2) to examine systematic errors between the simulated and the observed circulation, precipitation, and hydrologic cycle; (3) to examine the interannual variability of the simulated atmosphere and compare it with observation; and (4) to examine the ability of the model to capture the major climate anomalies in response to events such as El Nino and La Nina. The 10-year mean seasonal and annual simulated circulation is quite reasonable compared to the analyzed circulation, except the polar regions and area of high orography. Precipitation over tropics are quite well simulated, and the signal of El Nino/La Nina episodes can be easily identified. The time series of evaporation and soil moisture in the 12 biomes of the biosphere also show reasonable patterns compared to the estimated evaporation and soil moisture.

Kim, J.-H.